基于生物条形码的粘蛋白和特定细胞电化学发光适配体生物传感方法研究

本文基于适配体识别和生物条形码放大策略,以MCF-7细胞和粘蛋白(MUC1)为目标物,MUC1的特异性适配体(rcDNA)为分子识别物质,Ru(phen)32+为信号物质,rcDNA通过巯基自组装于金电极表面作为传感界面,发卡DNA (hpDNA)和rcDNA通过巯基自组装在金纳米粒子(AuNP)表面合成的hpDNA/...     

电化学发光法测定盐酸普鲁卡因

基于盐酸普鲁卡因对鲁米诺在中性介质中铂电极上电化学发光的催化增敏作用 ,建立了测定盐酸普鲁卡因电化学发光新方法。电化学发光强度与盐酸普鲁卡因质量浓度在 4 .0× 1 0 -7～6 .0× 1 0 -6g mL范围内有良好的线性关系 ,检测限为 2 .0× 1 0 -7g mL,相对标准偏差为 4 .4 %。该方法已用于针剂中盐酸普鲁卡因的测定     

Electrogenerated chemiluminescence aptamer-based method for the determination of thrombin incorporating quenching of tris(2,2-bipyridine)ruthenium by ferrocene

A novel electrogenerated chemiluminescence (ECL) aptamer-based biosensing method for the determination of thrombin was developed on basis of a structure-switching ECL-dequenching mechanism. A thiolated ss-DNA capture probe, composing of a ss-DNA sequence to adopt two distinct structures-a DNA double strand with a complementary DNA sequence tagged with a ECL signal producer tris(2,2^′-bipyridyl)ruthenium derivative and a DNA duplex with a thrombin-binding aptamer tagged with a ECL-quencher ferrocene (FcDNA), was self-assembled onto surface of a gold electrode. In the presence of thrombin, the aptamer sequence prefers to form the aptamer-thrombin complex and the switch of the binding partners occurs in conjunction with the generation of a strong ECL signal owing to the dissociation of FcDNA. The integrated ECL intensity versus the concentration of thrombin was linear in the range from 2.0 × 10⁻¹⁰ M to 2.0 × 10⁻⁷ M. The detection limit was 6 × 10⁻¹¹ M. The relative standard derivation for 2.0 × 10⁻⁹ M was 5.7% (n = 7). This work demonstrates that the sensitivity and specificity of ECL aptamer-based method for proteins can be greatly improved using quenching ECL signal producer by a chemical quencher such as ferrocene.     

Determination of cocaine on banknotes through an aptamer-based electrochemiluminescence biosensor

A novel electrochemiluminescence (ECL) “sandwich” biosensor has been developed to detect cocaine. The sandwich biosensor was fabricated on the basis of the fact that a single aptamer could be split into two fragments and the two dissociated parts could form a folded, associated complex in the presence of targets. One of these (capture probe), which had hexane–thiol at its 5′-terminus, was immobilized on a gold electrode via thiol–gold binding. The other one (detection probe) was labeled with the ECL reagent tris(2,2′-bipyridyl)ruthenium(II)-doped silica nanoparticles (RuSiNPs) at its 3′-terminus. Owing to the weak interaction between the two fragments, the sensor exhibited a low ECL signal in the absence of cocaine. After the target cocaine had been added to the solution, it induced association of the two fragments and stabilized the associated complexes, leading to immobilization of RuSiNPs on the electrode surface, and the ECL detected on the electrode surface was enhanced. The enhanced ECL intensity was directly proportional to the logarithm of the cocaine concentration in the range from 1.0 × 10⁻⁹ to1.0 × 10⁻¹¹ mol/L, with a detection limit of 3.7 × 10⁻¹² mol/L. The biosensor was applied to detect trace amounts of cocaine on banknotes with satisfactory results.     

Electrogenerated chemiluminescence for potentiometric sensors

We report here on a generic approach to read out potentiometric sensors with electrogenerated chemiluminescence (ECL). In a first example, a potassium ion-selective electrode acts as the reference electrode and is placed in contact with the sample solution. The working electrode of the three-electrode cell is responsible for ECL generation and placed in a detection solution containing tris(2,2'-bipyridyl)ruthenium(II) [Ru(bpy)(3)(2+)] and the coreactant 2-(dibutylamino)ethanol (DBAE), physically separated from the sample by a bridge. Changes in the sample potassium concentration directly modulate the potential at the working electrode, and hence the ECL output, when a constant-potential pulse is applied between the two electrodes. A linear response of the ECL intensity to the logarithmic potassium concentration between 10 μm and 10 mM was found.     

A sensitive, label-free, aptamer-based biosensor using a gold nanoparticle-initiated chemiluminescence system

We report a label-free, aptamer-based chemiluminescent biosensor. The biosensor relies upon the catalytic activity of unmodified gold nanoparticles (AuNPs) on the luminol-H(2)O(2) chemiluminescence (CL) reaction, and the interaction of unmodified AuNPs with the aptamer. The unmodified AuNPs can effectively differentiate unstructured and folded aptamer. The binding of the aptamer with the target can induce the AuNP aggregation in the presence of 0.5 M NaCl, and after aggregation the catalytic activity of the AuNPs on the luminol-H(2)O(2) CL reaction is greatly enhanced. During the assay, no covalent functionalization of the AuNPs or aptamer is required. The detection limit of thrombin was estimated to be as low as 26 fM, and the sensitivity was more than 4 orders of magnitude better than that of known AuNP-based colorimetric methods for the detection of thrombin. This aptamer-based biosensor offers the advantages of being simple, cheap, rapid, and sensitive.     

An aptamer-based biosensor for sensitive thrombin detection

A sensitive aptamer-based sandwich-type sensor is presented to detect human thrombin using quantum dots as electrochemical label. CdSe quantum dots were labeled to the secondary aptamer, which were determined by the square wave stripping voltammetric analysis after dissolution with nitric acid. The aptasensor has a lower detection limit at 1 pM, while the sample consumption is reduced to 5 μl. The proposed approach shows high selectivity and minimizes the nonspecific adsorption, so that it was used for the detection of target protein in the human serum sample. Such an aptamer-based biosensor provides a promising strategy for screening biomarkers at ultratrace levels in the complex matrices.     

Electrogenerated chemiluminescence from Au nanoclusters

Electrogenerated chemiluminescence (ECL) of Au clusters is observed for the first time using triethyamine (TEA) as the coreactant. The potential application of ECL Au clusters in analytical chemistry is also demonstrated using Pb(2+) as an example.     

Label-free aptamer-based chemiluminescence detection of adenosine

We have developed a novel sensitive chemiluminescence (CL) aptasensor for the target assay as exemplified by using adenosine as a model target. In this work, we have demonstrated the signaling mechanism to make detection based on magnetic separation and 3,4,5-trimethoxyl-phenylglyoxal (TMPG), a special CL reagent as the signaling molecule, which reacts instantaneously with guanine nucleobases (G) of adenosine-binding aptamer strands. Briefly, amino-functioned capture DNA sequences are immobilized on the surface of carboxyl-modified magnetic beads, and then hybridized with label-free G-rich (including 15 guanine nucleobases) adenosine-binding aptamer strands to form our CL aptasensor. Upon the introduction of adenosine, the aptamer on the surface of magnetic beads is triggered to make structure switching to the formation of the adenosine/aptamer complex. Consequently, G-rich aptamer strands are forced to dissociate from magnetic beads sensing interface, resulting in a decrease of CL signal. The decrement of peak signal is proportional to the amount of adenosine. The effects of the amounts of capture DNA, aptamer, magnetic beads are investigated and optimized. It was found that the CL intensity had a linear dependency on the concentration of adenosine in the range of 4 × 10⁻⁷ to 1 × 10⁻⁵ M. With a low detection limit of 8 × 10⁻⁸ M and simplicity in CL detection, this novel technique will offer a great promise for future target/aptamer analysis.     

Electrogenerated chemiluminescence detection of single entities

Electrogenerated chemiluminescence, also known as electrochemiluminescence (ECL), is an electrochemically induced production of light by excited luminophores generated during redox reactions. It can be used to sense the charge transfer and related processes at electrodes via a simple visual readout; hence, ECL is an outstanding tool in analytical sensing. The traditional ECL approach measures averaged electrochemical quantities of a large ensemble of individual entities, including molecules, microstructures and ions. However, as a real system is usually heterogeneous, the study of single entities holds great potential in elucidating new truths of nature which are averaged out in ensemble assays or hidden in complex systems. We would like to review the development of ECL intensity and imaging based single entity detection and place emphasis on the assays of small entities including single molecules, micro/nanoparticles and cells. The current challenges for and perspectives on ECL detection of single entities are also discussed.

We summarize the history and recent development that has been made in the ECL detection of single entities.     

Microfluidic paper-based chemiluminescence biosensor for simultaneous determination of glucose and uric acid

In this study, a novel microfluidic paper-based chemiluminescence analytical device (μPCAD) with a simultaneous, rapid, sensitive and quantitative response for glucose and uric acid was designed. This novel lab-on-paper biosensor is based on oxidase enzyme reactions (glucose oxidase and urate oxidase, respectively) and the chemiluminescence reaction between a rhodanine derivative and generated hydrogen peroxide in an acid medium. The possible chemiluminescence assay principle of this μPCAD is explained. We found that the simultaneous determination of glucose and uric acid could be achieved by differing the distances that the glucose and uric acid samples traveled. This lab-on-paper biosensor could provide reproducible results upon storage at 4 °C for at least 10 weeks. The application test of our μPCAD was then successfully performed with the simultaneous determination of glucose and uric acid in artificial urine. This study shows the successful integration of the μPCAD and the chemiluminescence method will be an easy-to-use, inexpensive, and portable alternative for point-of-care monitoring.     

Quantum-dot/aptamer-based ultrasensitive multi-analyte electrochemical biosensor

The coupling of aptamers with the coding and amplification features of inorganic nanocrystals is shown for the first time to offer a highly sensitive and selective simultaneous bioelectronic detection of several protein targets. This is accomplished in a single-step displacement assay in connection to a self-assembled monolayer of several thiolated aptamers conjugated to proteins carrying different inorganic nanocrystals. Electrochemical stripping detection of the nondisplaced nanocrystal tracers results in a remarkably low (attomole) detection limit, that is, significantly lower than those of existing aptamer biosensors. The new device offers great promise for measuring a large panel of disease markers present at ultralow levels during early stages of the disease progress.     

Electrogenerated chemiluminescence of single conjugated polymer nanoparticles

We demonstrate a novel and powerful method to study electrogenerated chemiluminescence (ECL) of single nanoparticles (NPs) (r = 25 +/- 15 nm) of a conjugated polymer, F8BT, on an ITO electrode in the presence of a co-reactant, such as tri-n-propylamine (TPrAH) in acetonitrile solution. The results reveal that the maximum formation rate of ECL of individual NPs is achieved after a long "build-up" time (10-40 s after pulse application). The high number of detected ECL photons from individual NPs (1500 photons during 100 s) highlights the potential of this technique as a very sensitive analytical method. Additionally, TPrAH acts as a very efficient protecting agent against irreversible electrochemical processes occurring in F8BT, as found in photoluminescence studies. This protection mechanism probably involves the neutralization of holes at the particle surface via electron transfer by both TPrAH and TPrA radical (TPrA*).     

Electrogenerated chemiluminescence in an electrodeposited redox hydrogel

We report the electrodeposition, under physiological conditions, of an electrochemiluminescent (ECL) Ru^2+/3+ complex-containing redox hydrogel. The ECL-hydrogels were formed by potential cycling of a solution of [poly(4-vinylpyridine)Ru(2,2′-bipyridine)²Cl^?]^+/2+, its un-coordinated backbone pyridines partially quaternized with bromoethylamine for solubility in water and for swelling to a hydrogel after crosslinking. The polymer was electrosorbed on plasma-oxidized graphite in the anodic half of the cycle and irreversibly crosslinked, to form a swelling but insoluble film, in the cathodic half cycle. The ECL resulted of the chemical reaction of electro-oxidatively produced tri-n-propylamine-radical with the hydrogel’s Ru²⁺ centers. The emission spectra of the photo-excited films and their ECL spectra were identical. The ECL-emission increased one thousand-fold, linearly with the tri-n-propylamine (TPrA) concentration, between 100 nM and 0.1 mM.     

核酸适配体生物传感器在三聚氰胺检测中的应用进展

三聚氰胺常被非法添加到食品中,以提高食品中蛋白质的含量。但是,三聚氰胺一旦进入体内,会对人们的健康造成伤害。因此,对三聚氰胺的检测十分必要。为了弥补传统仪器检测法和免疫检测法的不足,基于核酸适配体开发了一系列新的生物传感器,用于三聚氰胺的检测。按照与三聚氰胺的不同识别机制,把这些新的生物传感器分成了四类,分别为基于多聚胸腺嘧啶DNA链和三聚氰胺识别的生物传感器、基于无嘌呤位点的三链DNA结构和三聚氰胺识别的生物传感器、基于核酸适配体和三聚氰胺识别的生物传感器、基于三聚氰胺和汞离子/铜离子等配位识别的生物传感器。本文按照上述四类方法逐个展开,对核酸适配体生物传感器在三聚氰胺检测中的应用进行了综述,并对它们的优缺点进行阐述。     

An RNA aptamer-based electrochemical biosensor for detection of theophylline in serum

An electrochemical RNA aptamer-based biosensor for rapid and label-free detection of the bronchodilator theophylline was developed. The 5'-disulfide-functionalized end of the RNA aptamer sequence was immobilized on a gold electrode, and the 3'-amino-functionalized end was conjugated with a ferrocene (Fc) redox probe. Upon binding of theophylline the aptamer switches conformation from an open unfolded state to a closed hairpin-type conformation, resulting in the increased electron-transfer efficiency between Fc and the electrode. The electrochemical response, which was measured by differential pulse voltammetry, reaches saturation within a few minutes after addition of theophylline, and the dynamic range for detecting theophylline is 0.2-10 muM. The electrode displays an inhibited response when applied directly in serum samples treated with RNase inhibitors; however a full response to the theophylline serum concentration was obtained by transferring the electrode to blank serum-free buffer solutions. It was demonstrated that theophylline is detected with high selectivity in the presence of caffeine and theobromine.     

Application of a novel co-enzyme reactor in chemiluminescence flow-through biosensor for determination of lactose

A novel enzyme reactor with co-immobilization of β-galactosidase and glucose oxidase in calcium alginate fiber (CAF) and amine modified nanosized mesoporous silica (AMNMS) was prepared which incorporate the adsorption and catalysis of AMNMS with the cage effect of the polymer to increase catalytic activity and stability of immobilized enzyme. The enzyme reactor was applied to prepare a chemiluminescence (CL) flow-through biosensor for determination of lactose combined with a novel luminol-diperiodatonickelate (DPN) CL system we reported. It shows that the CL flow-through biosensor possesses long lifetime, high stability, high catalytic activity and sensitivity. The relative CL intensity was linear with the lactose concentration in the range of 8 × 10⁻⁸-4 × 10⁻⁶ g mL⁻¹ with the detection limit of 2.7 × 10⁻⁸ g mL⁻¹ (3σ). It has been successfully applied to the determination of lactose in milk.     

Electrogenerated chemiluminescence of fluorescein in aqueous alkaline solutions

Fluorescein is shown to emit light when electrolyzed either anodically or cathodically using potential pulses, in aqueous alkaline solutions at a platinum electrode.