Evaluation of 1st and 2nd generation of poly(amidoamine) dendrimer functionalized carbon nanotubes for the efficient removal of neptunium

Journal of Radioanalytical and Nuclear Chemistry - Herein, sorption of pentavalent neptunium from aqueous acidic solution was carried out onto 1st and 2nd generation of poly(amidoamine) dendrimer...     

Grafting of hyperbranched poly(amidoamine) onto carbon black surfaces using dendrimer synthesis methodology

To modify carbon black surface, the surface grafting of hyperbranched poly(amidoamine) onto the surface by using dendrimer synthesis methodology was investigated. Carbon black having amino groups (initiator sites) was prepared by the reduction of surface nitro groups introduced by nitration of aromatic rings. It was found that hyperbranched poly(amidoamine) was propagated from carbon black surface by repeating two processes: (1) Michael addition of methyl acrylate (MA) to surface amino groups and (2) amidation of the resulting esters with ethylenediamine: the percentage of poly(amidoamine) grafting reached to 96.2% after 10th‐generation. The grafting of hyperbranched poly(amidoamine) onto polystyrene‐bead as a model compound of carbon black was also achieved by the above procedures. However, the theoretical propagation of poly(amidoamine) dendrimer was not achieved, because of steric hindrance of grafted polymer. Hyperbranched poly(amidoamine)‐grafted carbon black gave a stable dispersion in a good solvent for poly(amidoamine). Copyright © 2001 John Wiley & Sons, Ltd.     

Functionalization of multi-walled carbon nanotubes by epoxide ring-opening polymerization

In this study, covalent functionalization of carbon nanotubes (CNTs) was accomplished by surface-initiated epoxide ring-opening polymerization. FT-IR spectra showed that polyether and epoxide group covalently attached to the sidewalls of CNTs. TGA results indicated that the polyether was successfully grown from the CNT surface, with the final products having a polymer weight percentage of ca. 14-74 wt%. The O/C ratio of CNTs increased significantly from 5.1% to 29.8% after surface functionalization of CNTs. SEM and TEM images of functionalized CNTs exhibited that the tubes were enwrapped by polymer chains with thickness of several nanometers, forming core-shell structures with CNTs at the center.     

A novel biosensor for sterigmatocystin constructed by multi-walled carbon nanotubes (MWNT) modified with aflatoxin-detoxifizyme (ADTZ)

Sterigmatocystin, ST, is carcinogenic mycotoxin with toxicity second to aflatoxins, contaminated in foods- and feeds-stuff widely. A three-electrode system was employed to examine the response character of the covalently united ADTZ-MWNTs electrode to ST, and the results indicated that an oxidation peak of ST was observed at about +400 mv, the linear detection range of ST was from 4.16 x 10(-5) mg/ml (0.13 microM) to 1.33 x 10(-3) mg/ml (4.29 microM) with the detection limit at 0.13 microM. Compared to the corresponding results obtained from the MWNTs modified electrode that ADTZ was directly sediment (adsorbed) on it, the sensitivity of ours had been improved by two orders of magnitude, which could provide some important data to further research.     

Analysis of poly(amidoamine) dendrimer structure by UV-vis spectroscopy

We report a UV-vis spectroscopic study of four different types of poly(amidoamine) dendrimers. The results indicate that the degree of protonation of the interior tertiary amines of these dendrimers correlates directly to an absorption band with λ(max) in the range of 280-285 nm. Specifically, at low pH, the tertiary amines are protonated and the 280-285 nm band is absent. However, at elevated pH, when these groups are deprotonated, this band appears. Similar results were obtained for a simple model compound. The dependence of the 280-285 nm band on the chemical state of the tertiary amines of the dendrimers was confirmed by complexing them with Pd(2+) and Pt(2+). In this case the band disappears, and it only reappears when the metal ions are decomplexed following reduction with BH(4)(-). Finally, filtration experiments showed that the absorption band between 280-285 nm arises exclusively from intact, or nearly intact, dendrimers rather than low-molecular-weight fragments.     

An electrochemiluminescent biosensor for glucose based on the electrochemiluminescence of luminol on the nafion/glucose oxidase/poly(nickel(II)tetrasulfophthalocyanine)/multi-walled carbon nanotubes modified electrode

A poly(nickel(II) tetrasulfophthalocyanine)/multi-walled carbon nanotubes composite modified electrode (polyNiTSPc/MWNTs) was fabricated by electropolymerization of NiTSPc on MWNTs-modified glassy carbon electrode (GCE). The modified electrode was found to be able to greatly improve the emission of luminol electrochemiluminescence (ECL) in a solution containing hydrogen peroxide. Glucose oxidase (GOD) was immobilized on the surface of polyNiTSPc/MWNTs modified GC electrode by Nafion to establish an ECL glucose sensor. Under the optimum conditions, the linear response range of glucose was 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol L⁻¹ (defined as the concentration that could be detected at the signal-to-noise ratio of 3). The ECL sensor showed an outstanding well reproducibility and long-term stability. The established method has been applied to determine the glucose concentrations in real serum samples with satisfactory results.     

Structural analysis of poly(amidoamine) dendrimer immobilized in crosslinked poly(ethylene glycol)

Polymeric membranes comprised of poly(amidoamine) (PAMAM) dendrimer immobilized in a poly(ethylene glycol) (PEG) network exhibit an excellent CO₂ separation selectivity over H₂. The CO₂ permeability increases with PAMAM dendrimer concentration in the polymeric membrane and becomes 500 times greater than H₂ permeability when the dendrimer content was 50 wt % at ambient conditions (5 kPa of CO₂ partial pressure). However, the detailed morphology of the membrane has not been discussed. The immiscibility of PAMAM dendrimer and PEG matrix results in phase separation, which takes place in a couple of microns scale. Especially, laser scanning confocal microscope captures a 3D morphology of the polymeric blend. The obtained 3D reconstructions demonstrate a bicontinuous structure of PAMAM dendrimer‐rich and PEG‐rich phases, which indicates the presence of PAMAM dendrimer channel penetrating the polymeric membrane, and CO₂ will preferentially pass through the dendrimer channel. In addition, Fourier transform of the 3D reconstructions indicates the presence of a periodic structure. An average size of the dendrimer domain calculated is 2–4 μm in proportion to PAMAM dendrimer concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Functionalization of multi-walled carbon nanotubes with coumarin derivatives and their biological evaluation

We report the synthesis and the characterization of different multi-walled carbon nanotubes (MWCNTs) linked to natural molecules, 5,7-coumarins and/or oleic acid, obtained from purified pristine MWCNTs by a cascade of chemical functionalization. The activities of these modified MWCNTs were investigated in vitro on human umbilical vein endothelial cells (HUVECs) by evaluating their ability to influence cell viability and to induce cell apoptosis. Our data showed that pristine MWCNTs are markedly cytotoxic; conversely, the carboxylated carbon nanotubes, much more readily dispersed in aqueous solutions and CNT-Link, the key intermediate designed by us for the drug anchorage, are biocompatible at the tested concentrations (1 and 10 μg ml(-1)).     

Electrochemical determination of nitrite based on poly(amidoamine) dendrimer-modified carbon nanotubes for nitrite oxidation

This study describes a simple and reliable method for the electrochemical determination of nitrite based on poly(amidoamine)-modified carbon nanotubes. Amine-terminated poly(amidoamine) (generation 4.0, G4-NH₄) were covalently attached onto multi-walled carbon nanotube (MWNT)-modified glass carbon (GC) electrodes (written as G4-NH₄/MWNT-modified GC) and which were used for the electrochemical determination of nitrite. The studies show that the G4-NH₄/MWNT-modified electrodes demonstrated significantly enhanced electrochemical activity towards nitrite oxidation. Chronoamperometry studies reveal that the amperometric response is rapid, stable, and offers a linear dependence over a wide range of nitrite concentrations from 5 μM to 1.5 mM. The proposed method can be used for the continuous monitoring of nitrite in real samples. The electrochemical properties of the G4-NH₄/MWNT nanocomposites are reasonably envisaged to be promising for providing a nanostructured platform in the development of electrochemical sensors or biosensors.     

Microcontact printed poly(amidoamine) dendrimer monolayers on silicon oxide surface

Patterning of silicon substrates with poly(amidoamine) generation 5 (PAMAM-G5) dendrimers using soft lithographic microcontact printing (μCP) is presented. μCP is shown to yield monolayers of dendrimers patterned with high level of definition over μm² to mm² areas. The patterns are stable over a period of weeks, which is attributed to the suppressed diffusion of partially charged G5 PAMAM on oxidized silicon. However, the dendrimers studied were shown to be relatively weakly bound to the substrate when subjected to lateral stresses. In aqueous conditions most of the dendrimers desorbed from the substrate.     

Polyaniline and poly(flavin adenine dinucleotide) doped multi-walled carbon nanotubes for p-acetamidophenol sensor

A conductive biocomposite film (MWCNTs-PANIFAD) which contains multi-walled carbon nanotubes (MWCNTs) along with the incorporation of poly(aniline) and poly(flavin adenine dinucleotide) co-polymer (PANIFAD) has been synthesized on gold and screen printed carbon electrodes by potentiostatic methods. The presence of MWCNTs in the MWCNTs-PANIFAD biocomposite film enhances the surface coverage concentration (Γ) of PANIFAD and increases the electron transfer rate constant (k_s) to 89%. Electrochemical quartz crystal microbalance studies reveal the enhancements in the functional properties of MWCNTs and PANIFAD present in MWCNTs-PANIFAD biocomposite film. Surface morphology of the biocomposite film has been studied using scanning electron microscopy and atomic force microscopy. The surface morphology results reveal that PANIFAD incorporated on MWCNTs. The MWCNTs-PANIFAD biocomposite film exhibits promising enhanced electrocatalytic activity towards the oxidation of p-acetamidophenol. The cyclic voltammetry has been used for the measurement of electroanalytical properties of p-acetamidophenol by means of PANIFAD, MWCNTs and MWCNTs-PANIFAD biocomposite film modified gold electrodes. The sensitivity value of MWCNTs-PANIFAD film (88.5 mA mM⁻¹ cm⁻²) is higher than the values which are obtained for PANIFAD (28.7 mA mM⁻¹ cm⁻²) and MWCNTs films (60.7 mA mM⁻¹ cm⁻²). Finally, the flow injection analysis (FIA) has been used for the amperometric detection of p-acetamidophenol at MWCNTs-PANIFAD film modified screen printed carbon electrode. The sensitivity value of MWCNTs-PANIFAD film (3.3 mA mM⁻¹ cm⁻²) in FIA is also higher than the value obtained for MWCNTs film (1.1 mA mM⁻¹ cm⁻²).     

Spectroelectrochemical and electrochromic behavior of poly(methylene blue) and poly(thionine)-modified multi-walled carbon nanotubes

Journal of Solid State Electrochemistry - The increasing efforts devoted to fabricating electrochromic (EC) devices have motivated a lot of studies to develop new EC materials. Herein, we introduce...     

Biocomposites of covalently linked glucose oxidase on carbon nanotubes for glucose biosensor

The formation of covalently linked composites of multi–walled carbon nanotubes (MWCNT) and glucose oxidase (GOD) with high-function density for use as a biosensing interface is described. The reaction intermediates and the final product were characterized by using FT–IR spectroscopy, and the MWCNT-coated GOD nanocomposites were examined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Interestingly, it was found that the GOD–MWCNT composites are highly water soluble. Electrochemical characterization of the GOD–MWCNT composites that were modified on a glassy carbon electrode shows that the covalently linked GOD retains its bioactivity and can specifically catalyze the oxidation of glucose. The oxidation current shows a linear dependence on the glucose concentration in the solution in the range of 0.5–40 mM with a detection limit of 30 μM and a detection sensitivity of 11.3 μA/mMcm². The present method may provide a way to synthesize MWCNT related composites with other biomolecules and for the construction of enzymatic reaction-based biofuel cells and biosensors. Supported by grants from the National Natural Science Foundation of China (NSFC, No. 20125515; 90206037; 20375016) and the Natural Science Foundation of Jiangsu Province (Grant No. BK 2004210)     

Functionalization of multi-walled carbon nanotubes and their application for selective isolation of acidic proteins

A micro-column packed with PDDA-wrapped MWNTs in sequential injection system facilitates selective sorption of acidic protein species. Proteins adsorbed onto the PDDA-MWNT composites are afterwards collected by elution with a citrate buffer as stripping reagent. With a sample loading volume of 2.0 mL and an eluent volume of 200 microL, a retention efficiency of 100% and a recovery of 90% are achieved for BSA in the range 6-120 microg, resulting in an enrichment factor of 14. A sampling frequency of 15 h(-1) is achieved, along with a precision of 4.5% at 25 microg x mL(-1) BSA. The practical applicability of this system is demonstrated by processing human whole blood for successive isolation of acidic proteins.     

Visual observation of avidin-biotin affinity by fluorescent G4.5 poly(amidoamine) dendrimer

An air-treated G4.5 poly(amidoamine) (PAMAM) dendrimer displayed the enhanced fluorescence enough to be utilized as a fluorescence marker to visualize avidin-biotin affinity: On a fluorescence microscopic image, the avidin labeled by a fluorescent G4.5 PAMAM dendrimer was observed to be selectively bound on the biotin pattern that was prepared by amide-bonding of biotin on a carboxylic acid-terminated self-assembled monolayer and in turn by UV-irradiation with a photomask on the monolayer.     

Functionalization of single-walled carbon nanotubes with (R-)oxycarbonyl nitrenes

Sidewall functionalization of single-walled carbon nanotubes (SWCNTs) via the addition of (R-)oxycarbonyl nitrenes allows for the covalent binding of a variety of different groups such as alkyl chains, aromatic groups, dendrimers, crown ethers, and oligoethylene glycol units. Such additions lead to a considerable increase in the solubility in organic solvents such as 1,1,2,2-tetrachloroethane (TCE), dimethyl sulfoxide (DMSO), and 1,2-dichlorobenzene (ODCB). The highest solubilities of 1.2 mg/mL were found for SWCNT adducts with nitrenes containing crown ether of oligoethylene glycol moieties in DMSO and TCE, respectively. The presence of chelating donor groups within the addends allowed for the complexation of Cu(2+) and Cd(2+). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) revealed that the functionalized tubes form thin bundles with typical diameters of 10 nm. The presence of thin bundles in solution is supported by (1)H NMR spectroscopy. The elemental composition of the functionalized SWCNT was determined by X-ray photoelectron spectroscopy (XPS). The use of Raman and electron absorption spectroscopy (UV/Vis-nIR) showed that the electronic properties of the SWCNTs are mostly retained after functionalization, indicating a low degree of addition within this series of SWCNT derivatives.     

Study on interaction between poly(amidoamine) dendrimer and CdSe nanocrystal in chloroform

The binding of different categories of molecules to quantum dot has been studied for many years through different spectroscopic techniques to elucidate details of binding mechanism. In this work we present the results of the study of the interactions between CdSe and poly(amidoamine) dendrimer monitored by photoluminescence spectroscopy of CdSe in chloroform. Dendrimers with different terminal groups and different generations were used to bind with CdSe nanocrystal of different size. Significant differences in the values of binding constant Kb(n) and K(SV) were found in these experiments. The binding constant for poly(amidoamine) dendrimer of generation 4.0 is higher as compared to generation 3.5. The interaction of CdSe with poly(amidoamine) dendrimer shows an increase of binding constants with increasing dendrimer generation from 2.0 to 4.0, as well as with decreasing CdSe diameter. From HRTEM and FTIR analysis, we suggest that dendrimer/CdSe interactions are primarily hydrogen-bonding.     

SiO2–poly(amidoamine) dendrimer inorganic/organic hybrids

SiO₂–poly(amidoamine) (PAMAM) dendrimer hybrids were synthesized via (1) a Michael addition reaction between the dendrimer and 3‐(trimethoxysilyl) propyl acrylate, (2) the dissolution of the formed compound in methanol, and (3) the mixing of the latter solution with a methanol solution of partly hydrolyzed tetraethylorthosilicate (TEOS) and its casting on a glass substrate. ¹H NMR indicated that in the first step, 77% of the secondary amines were converted into tertiary amines when the fourth‐generation dendrimer was employed and 46% were converted when the second‐generation dendrimer was used. The final SiO₂–PAMAM dendrimer hybrids were obtained via the hydrolysis and condensation of the compound obtained via the Michael addition and the methanol solution of partly hydrolyzed TEOS. The compartmentalized structure of the hybrids due to the compartments of the dendrimers could be controlled by changing the dendrimer and the amount of TEOS. Scanning electron microscopy and transmission electron microscopy micrographs provided information about the structure of the hybrids. Like the PAMAM dendrimer, the SiO₂–PAMAM dendrimer hybrids exhibited a high metal ion complexing capacity because of the presence of the compartments of the dendrimer; they can be, however, much more easily handled, and, as demonstrated by thermogravimetric experiments, have much higher thermal resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1443–1449, 2000