Comparison of performances of bioanodes modified with graphene oxide and graphene–platinum hybrid nanoparticles

The performances of graphene oxide (GO) and graphene–platinum hybrid nanoparticles (Gr-Pt hybrid NPs) were compared for biofuel cell (BFC) systems. This is the first study that constitutes these nanomaterials in BFC systems. For this purpose, fabricated bioanodes were combined with laccase modified biocathode in a single cell membraneless BFC. Power and current densities of these systems were calculated as 2.40 μW cm^− 2 and 211.90 μA cm^− 2 for GO based BFC and 4.88 μW cm^− 2 and 246.82 μA cm^− 2, for Gr-Pt hybrid NPs based BFC. As a result, a pioneer study which demonstrates the effective performances of combination of graphene with Pt was conducted.     

Enhancement of the performances of a single concentric glucose/O2 biofuel cell by combination of bilirubin oxidase/Nafion cathode and Au–Pt anode

This work deals with a novel preparation method of bilirubin oxidase/2,2′-azinobis-3-ethylbenzothiazoline-6-sulfonic acid electrode. The enzyme and its mediator were adsorbed on carbon Vulcan XC-72R before their immobilization into a Nafion^® matrix. Promising results were obtained when this biocathode was associated with Au₇₀Pt₃₀ nanoparticles as anode in a single concentric glucose/O₂ biofuel cell (BFC). The latter BFC delivered at 37 °C a power density of 90 μW cm^?2 for a cell voltage of 0.4 V in phosphate buffer (pH 7.4) containing 0.01 M glucose. Moreover, the electrical performances were increased with the concentration of glucose by generating up to 190 μW cm^?2 for a cell voltage of 0.52 V when the concentration of the renewable fuel reached 0.7 M.     

Membrane-less and mediator-free enzymatic biofuel cell using carbon nanotube/porous silicon electrodes

Membrane-less and mediator-free direct electron transfer enzymatic biofuel cells (BFCs) with bioelectrodes comprised of single wall carbon nanotubes (SWNTs) deposited by two methods on porous silicon (pSi) substrates, are reported. In one method the SWNTs were grown by chemical vapor deposition (CVD) and then functionalized with carboxylic groups, and in the second method, pre-synthesized carboxylated SWNTs (c-SWNTs) were electrophoretically deposited on gold-coated pSi. Anodic glucose oxidase (GOx) and cathodic laccase (Lac) were immobilized on the pSi/SWNT substrates to form BFCs in pH 7 phosphate buffer solution. A peak power density of 1.38 μW/cm² (with a lifetime of 24 h) down to 0.3 μW/cm² was obtained for a BFC comprised of c-SWNT/enzyme electrodes in 4 mM glucose solution as fuel, corresponding to normal blood sugar concentration, and air as oxidant. BFCs of this relatively simple architecture have the potential for further optimization of power output and lifetime.     

A Miniature glucose/O2 biofuel cell with single-walled carbon nanotubes-modified carbon fiber microelectrodes as the substrate

This study demonstrates a new kind of miniature glucose/O₂ biofuel cells (BFCs) based on carbon fiber microelectrodes (CFMEs) modified with single-walled carbon nanotubes (SWNTs). SWNTs are used as a support both for stably confining the electrocatalyst (i.e., methylene green, MG) for the oxidation of NADH and the anodic biocatalyst (i.e., NAD⁺-dependent glucose dehydrogenase, GDH) for the oxidation of glucose and for efficiently facilitating direct electrochemistry of the cathodic biocatalyst (i.e., laccase) for the O₂ reduction. The prepared micro-sized GDH-based bioanode and laccase-based biocathode exhibit good bioelectrocatalytic activity toward the oxidation of glucose and the reduction of oxygen, respectively. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 45 mM glucose under ambient air, the power density of the assembled miniature compartment-less glucose/O₂ BFC reaches 58 μW cm⁻² at 0.40 V. The stability of the miniature glucose/O₂ BFC is also evaluated.     

An enzymatic glucose/O2 biofuel cell: Preparation,characterization and performance in serum

This study demonstrates a new kind of single-walled carbon nanotubes (SWNT)-based compartment-less glucose/O₂ biofuel cell (BFC) with glucose dehydrogenase (GDH) and bilirubin oxidase (BOD) as the anodic and cathodic biocatalysts, respectively, and with poly(brilliant creysl blue) (BCB) adsorbed onto SWNT nanocomposite as the electrocatalyst for the oxidation of NADH. The prepared GDH-polyBCB-SWNT bioanode exhibits an excellent electrocatalytic activity toward the oxidation of glucose biofuel; in 0.10 M phosphate buffer containing 20 mM NAD⁺ and 100 mM glucose, the oxidation of glucose commences at −0.25 V and the current reaches its maximum of 310 μA/cm² at −0.05 V vs. Ag/AgCl. At the BOD-SWNT biocathode, a high potential output is achieved for the reduction of O₂ due to the direct electron transfer property of BOD at the SWNTs. In 0.10 M phosphate buffer, the electrocatalytic reduction of O₂ is observed at a high potential of 0.53 V vs. Ag/AgCl with an electrocatalytic current plateau of ca. 28 μA/cm² at 0.45 V under ambient air and ca. 102 μA/cm² under O₂-saturated atmosphere. In 0.10 M phosphate buffer containing 10 mM NAD⁺ and 40 mM glucose under O₂-saturated atmosphere, the power density of the assembled SWNT-based glucose/O₂ BFC reaches 53.9 μW/cm² at 0.50 V. The performance and the stability of the glucose/O₂ BFC are also evaluated in serum. This study could offer a new route to the development of new kinds of enzymatic BFCs with a high performance and provide useful information on future studies on the enzymatic BFCs as in vivo power sources.     

A glucose/O2 biofuel cell base on nanographene platelet-modified electrodes

This study demonstrated a novel nanographene platelets (NGPs)-based glucose/O₂ biofuel cell (BFC) with the glucose oxidase (GOD) as the anodic biocatalysts and the laccase as the cathodic biocatalysts. The GOD/NGPs-modified electrode exhibited good catalytic activity towards glucose oxidation and the laccase/NGPs-modified electrode exhibited good catalytic activity towards O₂ electroreduction. The maximum power density was ca. 57.8 μW cm^? 2 for the assembled glucose/O₂ NGPs-based BFC. These results indicated that the NGPs were very useful for the future development of novel carbon-based nanomaterials BFC device.     

Oxygen transport through laccase biocathodes for a membrane-less glucose/O2 biofuel cell

The present study reports the development of operational membrane-less glucose/O₂ biofuel cell based on oxygen contactor. Glucose oxidation was performed by glucose oxidase (GOx) co-immobilized with the mediator 8-hydroxyquinoline-5-sulfonic acid hydrate (HQS) at the anode, whereas oxygen was reduced by laccase co-immobilized with 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS²⁻) at the cathode. Both enzymes and mediators were immobilized within electropolymerized polypyrrole polymers.Nevertheless, this system is limited by the secondary reaction of O₂ electro-reduction at the anode that reduces the electron flow through the anode and thus the output voltage. In order to avoid the loss of current at the anode in glucose/O₂ biofuel cell, we developed a strategy to supply dissolved oxygen separate from the electrolyte. Porous carbon tubes were used as electrodes and modified on the external surface by the couple enzyme/mediator. The inside of the cathode tube was continuously supplied with saturated dioxygen solution diffusing from the inner to the external surface of the porous tube. The assembled biofuel cell was studied under nitrogen at 37 °C in phosphate buffer at pH 5.0 and 7.0. The maximum power density reached 27 μW cm⁻² at a cell voltage of 0.25 V at pH 5.0 with 10 mM glucose. The power density was twice as high as compared to the same system with oxygen bubbling directly in the cell.     

High performance cathode-supported SOFC with perovskite anode operating in weakly humidified hydrogen and methane

A high performance cathode-supported solid oxide fuel cell (SOFC), suitable for operating in weakly humidified hydrogen and methane, has been developed. The SOFC is essentially made up by a YSZ/LSM composite supporting cathode, a thin YSZ film electrolyte, and a GDC-impregnated La_0.75Sr_0.25Cr_0.5Mn_0.5O₃ (LSCM) anode. A gas tight thin YSZ film (∼27 μm) was formed during the co-sintering of cathode/electrolyte bi-layer at 1200 °C. The cathode-supported SOFC developed in this study showed encouraging performance with maximum power density of 0.182, 0.419, 0.628 and 0.818 W cm⁻² in air/3% H₂O–97% H₂ (and 0.06, 0.158, 0.221 and 0.352 W cm⁻² in air/3% H₂O–97% CH₄) at 750, 800, 850 and 900 °C, respectively. Such performance is close to that of the cathode-supported cell (0.42 W cm⁻² vs. 0.455 W cm⁻² in humidified H₂ at 800 °C) developed by Yamahara et al. [Solid State Ionics 176 (2005) 451–456] with a Co-infiltrated supporting LSM-YSZ cathode, a (Sc₂O₃)_0.1(Y₂O₃)_0.01(ZrO₂)_0.89 (SYSZ) electrolyte of 15 μm in thickness and a SYSZ/Ni anode, indicating that the performance of the GDC-impregnated LSCM anode is comparable to that made of Ni cermet while stable in weakly humidified methane fuel.     

Development of micro-tubular SOFCs with an improved performance via nano-Ag impregnation for intermediate temperature operation

Micro-tubular solid-oxide fuel cell consisting of a 10-μm thick (ZrO₂)_0.89(Sc₂O₃)_0.1(CeO₂)_0.01 (ScSZ) electrolyte on a support NiO/(ScSZ) anode (1.8 mm diameter, 200 μm wall thickness) with a Ce_0.8Gd_0.2O_1.9 (GDC) buffer-layer and a La_0.6Sr_0.4Co_0.2Fe_0.8O_3−δ (LSCF)/GDC functional cathode has been developed for intermediate temperature operation. The functional cathode was in situ formed by impregnating the well-dispersed nano-Ag particles into the porous LSCF/GDC layer using a citrate method. The cells yielded maximum power densities of 1.06 W cm⁻² (1.43 A cm⁻², 0.74 V), 0.98 W cm⁻² (1.78 A cm⁻², 0.55 V) and 0.49 W cm⁻² (1.44 A cm⁻², 0.34 V), at 650, 600 and 550 °C, respectively.     

Improved SOFC performance with continuously graded anode functional layer

Continuously graded anode functional layers (CG-AFLs) were fabricated on the Ni–YSZ anode substrates by electrophoretic co-deposition (EPD) technique. The microstructure and composition of the CG-AFLs were investigated. The result showed that uniform and graded structure in AFL was obtained. The single cells were constructed on the basis of CG-AFLs, with a maximum output power density greater than 1.10 W cm^?2 obtained at 800 °C for the cell with 9.8 μm-thick CG-AFL. Electrochemical impedance spectroscopy (EIS) indicated that the excellent cell performance was contributed to the enlargement of triple phase boundary (TPB) by adding the CG-AFL.     

Ammonia treatment of carbon cloth anodes to enhance power generation of microbial fuel cells

Changes in microbial fuel cell (MFC) architecture, materials, and solution chemistry can be used to increase power generation by microbial fuel cells (MFCs). It is shown here that using a phosphate buffer to increase solution conductivity, and ammonia gas treatment of a carbon cloth anode substantially increased the surface charge of the electrode (from 0.38 to 3.99 meq m⁻²), and improved MFC performance. Power increased to 1640 mW m⁻² (96 W m⁻³) using a phosphate buffer, and further to 1970 mW m⁻² (115 W m⁻³) using an ammonia-treated electrode. The combined effects of these two treatments boosted power production by 48% compared to previous results using this air-cathode MFC. In addition, the start up time of an MFC was reduced by 50%.     

Sulfur tolerant redox stable layered perovskite SrLaFeO4 − δ as anode for solid oxide fuel cells

Redox stable K₂NiF₄ type layered perovskite SrLaFeO_4 − δ(SLFO_4 − δ) has been prepared and evaluated as anode for solid oxide fuel cell (SOFC). The SLFO_4 − δ shows linear thermal expansion behavior with TEC of 14.3 × 10^− 6 K^− 1. It also demonstrates excellent catalytic activity for various fuels. A scandia stabilized zirconia (ScSZ, 180 μm) electrolyte supported SOFC with the anode achieves maximum power densities (P_max) of 0.93, 0.76, 0.63, and 0.46 Wcm^− 2 at 900–750 °C, respectively, in wet H₂. P_maxs of cells supported by 250 μm ScSZ reach 0.57, 0.60 and 0.50 Wcm^− 2 in H₂, H₂ + 50 ppm H₂S and propane, respectively, at 800 °C. Moreover, the cells show stable power output during ~ 100 h operation at 800 °C under 0.7 V in various fuels. The P_max at 800 °C in wet H₂ even increases by ~ 11% in the subsequent two thermal cyclings, indicating that SLFO_4 − δ is a promising anode candidate for SOFC with good electro-catalytic activity, high stability and resistance to sulfur and coking.     

Proton-conducting solid oxide fuel cell (SOFC) with Y-doped BaZrO3 electrolyte

Y-doped BaZrO₃ (BZY) electrolyte films are successfully fabricated by utilizing the driving force from the anode substrate, aiming to circumvent the refractory nature of BZY materials. The BZY electrolyte film on the high shrinkage anode becomes dense after sintering even though no sintering aid is added, while the BZY electrolyte remains porous on the conventional anode substrate after the same treatment. The resulting BZY electrolyte shows a high conductivity of 4.5 × 10^− 3 S cm^− 1 at 600 °C, which is 2 to 20 times higher than that for most of BZY electrolyte films in previous reports. In addition, the fuel cell with this BZY electrolyte generates a high power output of 267 mW cm^− 2 at 600 °C. These results suggest the strategy presented in this study provides a promising way to prepare BZY electrolyte films for fuel cell applications.     

Ferrocene-modified Fe3O4@SiO2 magnetic nanoparticles as building blocks for construction of reagentless enzyme-based biosensors

A novel amperometric glucose biosensor was developed by entrapping glucose oxidase (GOD) in chitosan (CS) composite doped with ferrocene monocarboxylic acid-modified magnetic core-shell Fe₃O₄@SiO₂ nanoparticles (FMC-AFSNPs). It is shown that the obtained magnetic bio-nanoparticles attached to the surface of a carbon paste electrode (CPE) with the employment of a permanent magnet showed excellent electrochemical characteristics and at the same time acted as mediator to transfer electrons between the enzyme and the electrode. Under optimal conditions, this biosensor was able to detect glucose in the linear range from 1.0 × 10⁻⁵ to 4.0 × 10⁻³ M with a detection limit of 3.2 μM (S/N = 3). This immobilization approach effectively improved the stability of the electron transfer mediator and is promising for construction of biosensor and bioelectronic devices.     

An easy compartment-less biofuel cell construction based on the physical co-inclusion of enzyme and mediator redox within pressed graphite discs

We report on the easy and fast immobilization of glucose oxidase (GOD) and laccase by mechanical compression with graphite particles to form disc electrodes. The electrical wiring of GOD and laccase was efficiently carried out by their co-inclusion with ferrocene (Fc) and 2,2′-azinobis (3-ethylbenzothiazoline-6-sulfonate) diammonium salt (ABTS) respectively. A glucose/air compartment-less biofuel cell was constructed based on the association of GOD-ferrocene-graphite disc and laccase-ABTS – graphite disc electrodes as bioanode and biocathode respectively. Such biofuel cell yielded a power density of 23 μW cm^?2 at 0.33 V as well as an open-circuit voltage and a short-circuit current of 0.63 V and 166 μA, respectively.     

A microfluidic glucose biofuel cell to generate micropower from enzymes at ambient temperature

A Y-shaped microfluidic channel is applied for the first time to the construction of a glucose/O₂ biofuel cell, based on both laminar flow and biological enzyme strategies. During operation, the fuel and oxidant streams flow parallel at gold electrode surfaces without convective mixing. At the anode, the glucose oxidation is performed by the enzyme glucose oxidase whereas at the cathode, the oxygen is reduced by the enzyme laccase, in the presence of specific redox mediators. Such cell design protects the anode from an interfering parasite reaction of O₂ at the anode and offers the advantage of using different streams of oxidant and fuel for optimal performance of the enzymes. Electrochemical characterizations of the device show the influence of the flow rate on the output potential and current density. The maximum power density delivered by the assembled biofuel cell reached 110 μW cm^?2 at 0.3 V with 10 mM glucose at 23 °C. The microfluidic approach reported here demonstrates the feasibility of advanced microfabrication techniques to build an efficient microfluidic glucose/O₂ biofuel cell device.     

Asymmetric electrochemical capacitor microdevice designed with vanadium nitride and nickel oxide thin film electrodes

Vanadium nitride thin film has been coupled with electrodeposited nickel oxide in order to design an electrochemical capacitor microdevice. VN has been used as negative electrode while NiO was used as the positive one in 1 M KOH electrolyte. VN exhibits a pseudo-capacitive behavior while NiO shows a faradaic behavior. This asymmetric microdevice has been operated between 0.5 and up to 1.8 V in aqueous based electrolyte (1 M KOH). Long term cycling ability (10,000 charge/discharge cycles) has been demonstrated with interesting energy (1.0 μW h cm^− 2) and power (40 mW cm^− 2) densities.     

Noncovalent assembly of ferrocene on modified gold surfaces mediated by uracil–adenine base pairs

Redox-active ferrocene was assembled on gold surfaces through the hydrogen bonding interactions between adenine-substituted ferrocene and a uracil-terminated organothiol monolayer. The surface coverage of ferrocene Γ could be varied from ca. 4 × 10^? 11 to 2.0 × 10^? 10 mol cm^? 2 by diluting the thiol-modified uracil derivative with inert 1-octanethiol. A decrease in the apparent electron transfer rate constant for ferrocene, k_app, from ca. 50 to 10 s^? 1 was observed upon increasing Γ.     

Improved performance of anode with iron/sulfur-modified graphite in microbial fuel cell

The paper reports the operation of a new-design microbial fuel cell using compost leachate as a substrate, oxygen/electrodeposited MnO_x cathode and a new-anode concept with graphite modified by an iron/sulfur solid chemical catalyst which almost eliminates the starting delay time and gives very high current and power densities, I ~ 25 A m^− 3 at P_max ~ 12 W m^− 3 or I ~ 3.8 A m^− 2 at P_max ~ 1.8 W m^− 2.     

Switchable electrode functionalized with an azobenzene-containing copolymer thin film using the Langmuir–Schaefer technique for a “smart” uric acid/air fuel cell

A new photoswitchable electrode triggered by a brief light signal was fabricated by depositing an azobenzene-containing copolymer on an indium tin oxide substrate decorated with gold nanoparticles. The polymer formed a compact, complete thin film on the electrode surface using the Langmuir–Schaefer technique and offered reversible and stable switching performance. The conductivity and hydrophilicity of the electrode changed under UV/visible light due to the photoisomerization of the azobenzene moieties in the polymer film, influencing electron transfer and mass transport at the electrode. The electrochemical characterization demonstrated that the electrode exhibited reversibly switchable electrochemical behavior. In its active state, the as-prepared electrode possessed efficient electrocatalytic capability towards uric acid oxidation with a maximum anodic current density of 0.97 mA·cm^− 2. The uric acid/air fuel cell assembled from the photo-triggered anode and a Pt/C-modified cathode operated with an open circuit voltage of 0.12 V and a maximum power density of 41.33 μW·cm^− 2. The cell exhibited reversible switching performance (four cycles) and high stability: after one month the power output was 94.2% of the original maximum value.