Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.     

Extended Hückel MO calculations of the conformation of several amino acids

The conformation of the amino acid residues, glycine, alanine, proline, and phenylalanine have been predicted from molecular orbital calculations of appropriate model compounds. Using the current main chain rotation convention (, ) the principle conformations were found to be glycine (0, 0), alanine (240, 240), proline (120, 330) and phenylalanine (30, 330). Several secondary conformations were also found for glycine. A comparison of the predicted conformations is in good agreement with experimental data on comparable residues or model compounds.Supported by National Institutes of Health Grants No. FR 5409-07 and GM 16312-01.Recipient of a Public Health Service Research Career Development Award AM 1159-01.     

Surface tension as a function of temperature for some molten metals

Results are given for Sn, In, and Ge from the melting points up to 1700 C, for Pb up to 1400 C, for Tl up to 1100 C, for Bi up to 1300 C, and for Cd up to 600 C. In every case the surface tension is a linear function of temperature. Estimates are made of the critical temperatures of Cd and Ge. It is shown that deductions on the structure of the melts can be drawn from surface-tension data.     

Isokinetic relationships (IKRs) in organometallic and coordination chemistry: Reactions of Ru5C(CO)14{P(OPh)3} and other complexes

The linear compensation plot of H versus S for associative substitution reactions of Ru5C(CO)14 {P(OPh3)} with seven P-donor nucleophiles suggests that an isokinetic temperature, Tiso, of 253±10K exists. A detailed statistical analysis by the Linert-Exner method shows that the data are consistent with there being a genuine isokinetic temperature at 245K at which reactions with six out of the seven nucleophiles proceed at the same rate. This can be shown more easily, graphically more vividly, and with quantitatively the same or better results, by a simplified version of an earlier method due to Krug, Greiger et al. in which H values are found to depend linearly on corresponding values of G calculated at a suitably chosen temperature. This isokinetic behaviour is closely related to that shown by the linear free energy analysis of the rates in terms of the electronic and steric properties of the nucleophiles. The temperature dependence of the sensitivity of the rates to these electronic and steric properties suggests that the major factors involved are entropic rather than enthalpic, reactions with larger nucleophiles actually being favoured by enthalpic factors. Steric profiles obtained at different temperatures all pass through a common point with an isokinetic cone angle of 153°. A few examples of other reactions of organometallic or coordination compounds that show linear compensation plots of H versus S are also analysed by the Linert- Exner and Krug-Greiger methods. Some do show unambiguous isokinetic behaviour but others do not, even though the compensation plots appear to be linear.     

Oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82− and by IO4− in binary aqueous solvent mixtures at pressures up to 1.25 kbar

Second order rate constants and activation parameters H, S, and V have been measured for the oxidation of [Co(en)2(SOCH2CO2)]+ by S2O82– and by IO4– in highly aqueous H2O – t-BuOH mixtures. The changes in solvation on going from the initial to the transition state are discussed on the basis of the transfer functions Gto, Hto and Sto. Whereas Gt changes smoothly as the proportion of t-BuOH increases, the plots of Ht and TSt exhibit mirror behaviour and pass through extrema located around x2(t- BuOH)=0.038. Information on the role of solvation is complemented by the determination of activation volumes. These are discussed in terms of intrinsic and solvational contributions. It is proposed that changes in hydrophobic hydration are of principal importance in determining the response of H, S, and V to changes in solvent composition in H2O – t-BuOH mixtures.     

Measurement of specific heat and energetic characterization of materials up to high temperatures

A new DSC system has been developed which not only allows quantitative results in the temperature of –160C to 700C, but also allows the quantitative determination of a variety of material properties up to 1500C. For example, the specific heat of materials can be measured to at least 1400C, while enthalpies, etc. can be measured to 1500C.

---

Zusammenfassung Ein neuartiges DSC Messystem (Netzsch DSC 404) wurde entwickelt, das sich durch hohe Reproduzierbarkeit der Basislinie, grosse Empfindlichkeit und breiten Temperaturanwendungsbereich (–160C bis 700C resp. bis 1500C) auszeichnet. Die Messanordnung ermöglicht die Verwendung von unterschiedlichen GasatmosphÄren als auch Messungen im Vakuum. Es werden Beispiele der Bestimmung von SchmelzvorgÄngen, der Glasumwandlungstemperatur, der KristallinitÄt und der spezifischen WÄrme, sowohl für Polymere als auch für anorganische Materialien dargestellt und diskutiert.

     

Dynamic mechanical properties of irradiated polyvinyl chloride

Summary Effects of gamma radiation on the dynamic mechanical properties of polyvinyl chloride (PVC) have been studied at audio frequencies from 80 K to 450 K for doses up to 1400 megarads. Two damping peaks were observed between 80 K and 400 K. The onset of main relaxation near 350 K shifted to lower temperatures at low doses, and then shifted to higher temperatures at a dose of 1400 megarads. Only slight changes are discernible in the damping peak near 250 K upon irradiation, but definite variations are noted in the modulus curves. Upon irradiation to 270 megarads an additional damping peak appeared near 150 K accompanied by an increase in modulus at lower temperatures. The height of this peak increased with increasing radiation dose.Crosslinking was confirmed from rubber elastic behavior, swelling, and solvent extraction studies. Some tentative explanations for the changes occurring in the dynamic mechanical properties of irradiated PVC are given in terms of crosslinking, loss of crystallinity, and dehydrochlorination followed by the formation of conjugated series of double bonds.

---

Zusammenfassung Es wurde die Wirkung von-Strahlung auf die dynamisch-mechanischen Eigenschaften von Polyvinylchlorid (PVC) bei Hörfrequenzen von 80 K bis 450 K für Dosen bis zu 1400 Megarad untersucht. Zwei Dämpfungspiks zeigen sich zwischen 80 und 400 K. Das Einsetzen der Hauptrelaxation nahe 350 K verlagert sich zu tieferen Temperaturen bei kleineren Dosen, um dann zu höheren Temperaturen bei einer Dosis von 1400 Megarad hinaufzugehen. Nur leichte änderungen sind im Dämpfungspik nahe 250 K durch die Strahlung zu beobachten; aber in der Modulkurve werden definierte Variationen erkennbar. Nach Bestrahlung mit 270 Megarad erscheint ein zusätzlicher Dämpfungspik nahe 150 K, begleitet durch ein Anwachsen des Moduls zu tieferen Temperaturen. Die Höhe dieses Piks wächst mit wachsender Strahlungsdosis.Die Vernetzung wurde aus dem gummielastischen Verhalten, der Quellung und aus Lösungsmittel-Extraktionen bestimmt. Die im dynamisch-mechanischen Verhalten durch die Strahlung des PVC auftretenden änderungen werden auf Grund der Vernetzung, der Abnahme an Kristallinität, der Dehydrochlorierung — gefolgt durch die Bildung von Serien konjugierter Doppelbildungen — erklärt.

---

---

This work was supported in part by the National Science Foundation and the National Aeronautics and Space Administration.     

Thermal study of synthesis of cryptohalite

The present work represents a thermal study of synthesis of cryptohalite (Ammonium silicon hexafluoride) by sintering of quartz with ammonium fluoride using a derivatograph. The reaction products were identified microscopically and by using a Siemens Crystalloflex diffractometer. The DTA curves indicate that the intensive formation of cryptohalite takes place at 125–155C by an endothermic reaction. Cryptohalite is unstable and dissociates at 320–335C as represented by the sharp and large endothermic peaks at these temperatures.The resulted cryptohalite is colorless in thin sections and crystallizes in cubic system, in the form of octahedral crystals with perfect (111) cleavage. The dimorph bararite is not detected in all runs.

---

Zusammenfassung Mittels eines Derivatographen wurde die Synthese von Kryptohalit (Ammoniumsiliziumhexafluorid) durch Sintern von Quarz mit Ammoniumfluorid thermisch untersucht. Die Reaktionsprodukte wurden mikroskopisch und mit Hilfe eines Siemens-Crystalloflex Diffraktometers identifiziert. Die DTA-Kurven zeigen, da\ die intensive Bildung von Kryptohalit in einer endothermen Reaktion bei 125–155C abläuft. Wie durch die scharfen und intensiven endothermen Peaks bei 320–335C gezeigt wird, ist Kryptohalit bei dieser Temperatur instabil und dissoziiert.Das erhaltene Kryptohalit ist in dünnen Schnitten farblos und kristallisiert im kubischen System in der Form von oktaedrischen Kristallen mit perfekter (111) Spaltbarkeit. Das dimorphe Bararit konnte in keinem der Versuche beobachtet werden.

     

Analytische Dichtegradienten-Zentrifugation bei Temperaturen zwischen +4?C und +40?C

Zusammenfassung Es wird gezeigt, da\ die bei der analytischen Dichtegradienten-Zentrifugation benötigten Parameter, die von Hearst u. Mitarb. tabelliert wurden, auch für andere Temperaturen als 25C gültig sind. Das ist von gro\er Wichtigkeit, da hochempfindliche Enzyme nur bei Temperaturen um + 4C lÄnger als 24 h nativ bleiben. Man ist deshalb auf eine Zentrifugation bei dieser Temperatur angewiesen. Weil man oft nur sehr wenig Substanz isolieren kann, bleibt nur die Dichtegradienten-Zentrifugation als Methode der Wahl. Ein Vergleich der gemessenen Molekulargewichte bei 6C und 25C zeigt keine Abweichungen, die über die Me\genauigkeit hinausgehen.

---

Analytical density gradient centrifugation at temperatures between +4C and +40 C

It is shown that all the parameters needed for analytical density gradient centrifugation tabulated by Hearst et al. for 25C are valid for other temperatures, too. This will be important in the investigation of highly sensitive enzymes which are only stable at temperatures near +4C over a period of 24 h. Comparison of molecular weights determined at 6C und 25C shows no difference greater than 2%, which will be within the experimental error.

---

---

Das Bundesministerium für Bildung und Wissenschaft hat diese Arbeiten gro\zügig unterstützt.     

The kinetics and mechanism of aquation and base hydrolysis of the cis-[Co(cyclen)Cl2]+ cation (cyclen=1,4,7,10-tetraazacyclododecane)

The aquation of cis-[Co(cyclen)Cl2]+ (cyclen=1,4,7,10-tetraazacyclododecane) has been studied over a range of temperatures with 0.1 mol dm–3 HNO3 as solvent. At 25°C, kaq=4.5×10–3 s–1 with H=78 kJ mol–1 and S298=–21 J K–1 mol–1. Base hydrolysis of cis-[Co(cyclen)Cl2]+ is extremely rapid with kOH=2.1×107 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3. This is the largest rate constant so far reported for the base hydrolysis of a cis-dichloro-complex of a saturated macrocycle. The activation parameters, H=53 kJ mol–1 and S298=73 J K–1 mol–1 are consistent with a mechanism in which deprotonation of the substrate is rate-determining. This conclusion is confirmed by the observation of general base catalysis by formate ion. The Brønsted value for the reaction is ca. 0.72 and SN1(CB) and E2 mechanisms are considered to account for the kinetic results. Base hydrolysis of cis-[Co(cyclen)(OH)Cl]+ has also been studied in the pH range 6.5 to 8.7. The value of kOH=3.8×102 dm3 mol–1 s–1 at 25°C and I=0.1 mol dm–3 with H=110 kJ mol–1 and S298=171 J K–1 mol–1 are consistent with an SN1(CB) mechanism.     

Studies on the characteristics of the isomers of hexachlorocyclohexane (HCCH) by thermogravimetry

A new method of determination of HCCH isomers by thermogravimetry is described. The thermal changes of the isomers, the decomposition characteristics and the parameters for identification are discussed.

---

Zusammenfassung Eine neue Methode der Bestimmung von HCCH-Isomeren durch Thermogravimetrie wird beschrieben. Die thermischen Änderungen der Isomere, die Zersetzungscharakteristika und die Identifizierungsparameter werden erörtert.

---

Résumé On décrit une nouvelle méthode de détermination des isomères HCCH par thermogravimétrie. On discute les modifications thermiques des isomères, les caractéristiques de décomposition et les paramètres d'identification.

---

. , .

---

---

We are grateful to Dr. B. L. Amla, Director of this Institute, for his encoragement, and to Shri Hanumantha Rao Judav for his assistance.     

Influence of substituents on hydrogenation of nitro groups in aromatic hydrocarbons catalyzed by rhenium thiocomplexes

Homogeneous hydrogenation studies of (NO₂)_1–2–C₆H_3–4–L nitro compounds (where L=–H,–NH₂,–COOH,–CHO,–OH,–CH₃ and –CH=CH–COOH) catalyzed by Re₂S₆TThio₃Cl₂ in dimethylformamide solutions at and T=343 K, have revealed that the reaction is enhanced by electron-acceptor substitutents and hindered by electron-donor ones.

---

(NO₂)_1–2–C₆H_3–4–L, L=–H,–NH₂,–COOH,–CHO,–OH,–CH₃,–CH=CH–COOH, Re₂S₆Thio₃Cl₂ 343 . , .

     

Kinetics and mechanism of the interaction of DL-methionine with cis-diaquaethylenediamine platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of DL-methionine with [Pt(en)(H2O)2]2+ have been studied spectrophotometrically as a function of [Pt(en)(H2O)22+], [DL-methionine], PH and temperature. The reaction proceeds via a rapid outer sphere association followed by two slow consecutive steps having first order dependence on the aqua ion and methionine concentrations. Activation parameters have been evaluated using the Eyring equation. The low H1 (15.6 kJ mol–1) and large negative value of S1 (–230 J K–1 mol–1) as well as H2 (19.5 kJ mol–1) and S2 (–226 J K–1 mol–1) indicate an associative mode of activation for both the aqua ligand substitution processes in the two consecutive steps.     

Kinematic Viscosities of Binary Liquid Mixtures of 2-Butanone with 1,2-Propanediol

Kinematic viscosities of the binary 2-butanone (1) + 1,2-propanediol (2) solvent system have been measured for mixtures covering the whole miscibility range expressed by 0 x _i 1, at 19 temperatures in the range –10 t/°C 80. The measured values have been used to test empirical equations that express the kinematic viscosities as functions of the composition and temperature. Excess kinematic viscosities (^E) have also been calculated. Sign and magnitude of these quantities are discussed in terms of type and nature of specific intermolecular interactions. Furthermore, derived quantities such as thermodynamic parameters of viscous flow (G, H and S), are analyzed on the basis of Eyring's model. All the investigated excess mixing properties indicate the probable existence of stable two-component adducts in this binary solvent system.     

Molecular orbital calculations of rotational strengths: A study of skewed diketones

A skewed glyoxal molecule is considered as a model for the study of the optical activity of -diketones. The rotational strengths are calculated for various angles of twist, between trans (=0) and cis ( = 180). The wavefunctions are computed both by the extended Hückel method and by the SCF-CNDO method, considering all 22 valence electrons. The effect of configuration interaction is studied. All two-center terms are included in the calculation of the electric and magnetic transition moments. The results predict the rotational strength of the lowest transition to be negative for 0 < < 90 when the molecule is twisted in a right-handed way and to be positive for 90 < < 180. In general, the lowest transition is followed by a transition with opposite rotational strength, in analogy to the predictions of a simple exciton model.

---

Zusammenfassung Ein aus der ebenen Lage gedrehtes Glyoxalmolekül wird als Modell zum Studium der optischen AktivitÄt von -Diketonen betrachtet. Die RotationsstÄrken werden für verschiedene Drehwinkel ermittelt, zwischen trans ( = 0) und cis ( =180). Die Berechnung der Wellenfunktionen erfolgt sowohl nach der erweiterten Hückelmethode als auch nach dem SCF-CNDO-Verfahren, unter Berücksichtigung aller 22 Valenzelektronen. Der Einflu\ der Konfigurationswechselwirkung wird studiert. Die Berechnung der elektrischen und magnetischen übergangsmomente schlie\t alle Zweizentren-BeitrÄge ein. Die Resultate zeigen, da\ die RotationsstÄrke des langwelligsten übergangs im Falle eines rechtsgedrehten Moleküls negativ ist für 0 < < 90 und positiv für 90 < < 180. Im allgemeinen wird der langwelligste übergang von einem übergang mit entgegengesetzter RotationsstÄrke gefolgt, in Analogie zu den Voraussagen eines einfachen Exziton-Modells.

---

Résumé Une molécule de glyoxale non-plane est considérée comme modèle pour l'étude de l'activité optique de -dicétones. Les forces rotatoires sont calculées pour différents angles de torsion, entre la position trans (=0) et cis (=180). Les fonctions d'onde sont calculées par les méthodes extended Hückel, ainsi que SCF-CNDO, en considérant les 22 electrons de valence. L'effet de l'interaction de configurations est étudié. Tous les termes bicentriques sont inclus dans le calcul des moments de transition électriques et magnétiques. Les résultats montrent que la force rotatoire de la transition de plus basse fréquence est négative pour 0 < < 90 dans une molécule tournée en sens droit et positive pour 90 < < 180. En général, la transition de plus basse fréquence est suivie d'une transition dont la force rotatoire est opposée, en analogie aux prédictions d'un simple modèle exciton.

     

Gas phase hydrogenation of m-xylene on palladium catalysts

Gas phase hydrogenation of m-xylene on palladium supported catalysts was studied and compared with the hydrogenation of o-xylene. The modification in the stereoselectivity of palladium due to an increase in the acidity of the support is explained in terms of an increased residence time of the reactive species on the active surface, leading to a product composition closer to that predicted by thermodynamics.

---

- -. , , .

     

Molecular structure of aniline in the gaseous phase: A concerted study by electron diffraction and ab initio molecular orbital calculations

The molecular structure of free aniline has been investigated by gas-phase electron diffraction and ab initio MO calculations at the HF and MP2 levels of theory, using the 6-31G^*(6D) basis set. Least-squares refinement of a model withC _s symmetry, with constraints from MP2 calculations, has led to an accurate determination of the C-C-C angle at theipso position of the benzene ring, =119.0±0.2 (where the uncertainty represents total error). This parameter provides information on the extent of the interaction between the nitrogen lone pair and the system of the benzene ring, and could not be determined accurately by microwave spectroscopy. The angles at theortho, meta, andpara positions of the ring are 120.3±0.1, 120.7±0.1, and 119.0±0.3, respectively. Important bond distances are r _g(C-C)=1.398±0.003 å andr _g(C-N) =1.407±0.003 å. The effective dihedral angle between the H-N-H plane and the ring plane, averaged over the large-amplitude inversion motion of the amino group, is ¦¦=44±4. The equilibrium dihedral angle is calculated to be 41.8 at the HF level and 43.6 at the MP2 level, in agreement with far-infrared spectroscopic information. The MO calculations predict that the differencer(C_ortho-C_meta) -r(C_ipso-C_ortho) is 0.008–0.009 å. They also indicate that the nitrogen atom is displaced from the ring plane, on the side opposite to the amino hydrogens. The displacement is 0.049 å at the HF level and 0.072 å at the MP2 level. The two calculations, however, yield very different patterns for the minute deviations from planarity of the ring carbons.     

Experimental setup to study catalysts by combined pulse microcatalytic and ESR spectroscopic methods

A setup consisting of an ESR spectrometer and a pulse microcatalytic installation is suggested for simultaneous kinetic and spectral measurements directly in catalytic processes.

---

- , , .

     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.     

DTA identification of polycaprolactone

Polycaprolactone (PCL) is a new material used in orthopedics. It is characterized by an endothermic melting peak at about 61C, an endothermic decomposition peak at about 380C and an exothermic peak at about 453C. These three observed phenomena and the corresponding thermodynamic data made it easily possible to identify PCL among the other polymers previously examined with Differential Thermal Analysis (DTA).

---

Zusammenfassung Polycaprolacton ist ein neuartiger Kunststoff, der in der OrthopÄdie als Knochenersatz Verwendung findet. Die Charakterisierung und Identifizierung kann durch thermoanalytische Messungen (DTA) auf Grund von endothermen VorgÄngen bei 61 und 380C und eines exothermen Vorgangs bei 453C erfolgen.

---

---

The authors thank A. Crestin for technical contribution.