Synthesis and Antimycobacterial Evaluation of N-(4-(Benzyloxy)benzyl)-4-aminoquinolines

Tuberculosis remains a global health problem that affects millions of people around the world. Despite recent efforts in drug development, new alternatives are required. Herein, a series of 27 N-(4-(benzyloxy)benzyl)-4-aminoquinolines were synthesized and evaluated for their ability to inhibit the M. tuberculosis H37Rv strain. Two of these compounds exhibited minimal inhibitory concentrations (MICs) similar to the first-line drug isoniazid. In addition, these hit compounds were selective for the bacillus with no significant change in viability of Vero and HepG2 cells. Finally, chemical stability, permeability and metabolic stability were also evaluated. The obtained data show that the molecular hits can be optimized aiming at the development of drug candidates for tuberculosis treatment.     

车前草中黄酮类成分结构和性质的理论研究

采用密度泛函理论中ωB97XD/6-311+G(2d,p)方法对车前草中的黄酮类化合物进行量化计算研究, 探讨了该类化合物的构效关系. 首先研究了13种车前草中提取的黄酮类化合物(1~13)和已成药的二氢杨梅素(14)的几何结构、 谱学性质及电子结构, 再运用概念密度泛函理论进行反应指数分析, 最后利用药代动力学平台开展了成药性评价. 根据几何结构的分析结果初步推测14种黄酮类化合物的抗氧化能力强弱顺序为10>12≈ 7>13>6>4>14≈9≈8>11>5>3≈2>1. 核磁共振拟合结果表明, 利用该方法得到的核磁位移理论值与实验值吻合度较高(R²>0.95). 分子表面静电势图显示, 14种黄酮类化合物的静电势的极小值点都位于羰基氧附近, 极大值点都位于羟基氢附近, 且B环上对位羟基的极大值>C环和A环羟基极大值. 全局反应性描述符结果显示, 化合物1, 2, 4, 11和12的化学势较低, 电负性、 亲电指数和硬度较高, 说明这5种化合物的稳定性和反应性较好. 通过局部反应性描述符进一步预测了14种黄酮类化合物的亲核/亲电反应位点. 药代动力学结果显示, 化合物1, 3, 4, 6, 12和13的成药性和药代动力学活性较好. 研究结果表明, 化合物4和12最有成药潜力, 可进行更深入的实验研究.     

Oxidation of Antitubercular Drug Isoniazid by a Lipopathic Oxidant,Cetyltrimethylammonium Dichromate: A Mechanistic Study

The oxidation of an antitubercular drug isoniazid by a lipopathic oxidant cetyltrimethylammonium dichromate (CTADC) in a nonpolar medium generates isonicotinic acid both in the presence and the absence of acetic acid. The conventional UV–vis spectrophotometric method is used to study the reaction kinetics. The occurrence of the Michaelis–Menten–type kinetics with respect to isoniazid confirms the binding of oxidant and substrate to form a complex before the rate‐determining step. The existence of the inverse solvent kinetic isotope effect, k(H₂O)/ k(D₂O) = 0.7, in an acid‐catalyzed reaction proposes a multistep reaction mechanism. A decrease in the rate constant with an increase in [CTADC] reveals the formation of reverse micellar–type aggregates of CTADC in nonpolar solvents. In the presence of different ionic and nonionic surfactants, CTADC forms mixed aggregates and controls the reaction due to the charge on the interface and also due to partition of oxidant and substrate in two different domains. High negative entropy of activation (ΔS^? = –145 and –159 J K^?1 mol^?1 in the absence and presence of acetic acid) proposes a more ordered and highly solvated transition state than the reactants. Furthermore, the solvent polarity‐reactivity relationship reveals (i) the presence of less polar and less ionic transition state compared to the reactants during the oxidation, (ii) differential contribution from nonpolar and dipolar aprotic solvents toward the reaction process, and (iii) the existence of polarity/hydrophobic switch at log P = 0.73. A suitable mechanism has been proposed on the basis of experimental results. These results may provide insight into the mechanism of isoniazid oxidation in hydrophobic environment and may assist in understanding the drug resistance in different location.     

Synthesis,antioxidant, antibacterial,and DFT study on a coumarin based salen-type Schiff base and its copper complex

Synthesis of new efficient compounds is becoming urgent due to the resistance of organisms to drugs. Salen derivatives have interesting therapeutic and industrial applications. A coumarin based derivative of salen, 7-hydroxy-8-((E)-((2-((E)-((7-hydroxy-5-methyl-2-oxo-3,8a-dihydro-2Hchromen-8-yl)methylene)amino)-4-methylphenyl)imino)methyl)-5-methyl-2H-chromen-2-one (L), and its copper complex, CuL, have been synthesized and characterized. Antibacterial and antioxidant activity of these compounds have been evaluated and electronic, optical and molecular properties have been calculated using density functional theory (DFT) with B3LYP. The results were correlated with the biological activity and reactivity of the compounds. Experimental and theoretical calculations indicate that the studied copper complex has the potential to function as a drug.     

Synthesis theoretical and experimental spectroscopic characterization of isoniazid-benzoic acid drug complexes: Insilico and invitro biological evaluations

New organic charge-transfer molecules were synthesised by salt formation from isoniazid and benzoic acid/aspirin compounds acting as acceptor and donor molecules. The synthesised charge transfer complexes were characterized and structurally confirmed by various instrumental techniques such as UV–visible, FT-IR, powder XRD, and NMR spectroscopic methods. Initially, compounds are studied molecular docking analysis with different kinds of proteins, such as 1HNY.pdb, 1PGG.pdb and 4-COX.pdb. Docking results have been compared with molecular electrostatic potential mapping and Mulliken charge distribution methods. Results show that both complexes IAC and IBC have almost the same binding constant value with 1HNY.pdb. Besides, IBC has a more binding constant than the IAC with inflammatory proteins (1PGG.pdb and 4-COX.pdb). The reactivity of the complexes is explained by the chemical potential and electrophilic index derived by the frontier molecular orbitals using the DFT method. These results show a more electrophilic index of IBC than the IAC indicating, more electron affinity nature of IBC. This is also reflected in the in-vitro biological studies, which shows IAC having better activity in anti-diabetic studies whereas IBC has better activity in anti-inflammatory studies. For the sake of complex ability, all biological and molecular docking experimental results are compared with standard drug molecules.     

Brominated Nanodiamond as a Platform for Isoniazid Immobilization

Colloid Journal - The article is devoted to studying the synthesis of brominated nanodiamond and its reactivity with respect to N-nucleophiles (an antituberculous drug, isoniazid, and...     

A density functional study of the reactivity and stability of mixed copper complexes. Is hardness the reason?

Mixed-ligand Cu2+ ternary complexes, formed by an aromatic diimine and a second ligand with O donor atoms, show a higher than expected stability. To understand the factors affecting the stability of these systems, we performed a density functional study of [Cu(H2O)5]2+, [Cu(N-N)(H2O)3]2+, and [Cu(N-N)(O-O)H2O] (N-N is 1,10-phenanthroline, 5-nitro-1,10-phenanthroline, or 3,4,7,8-tetramethyl-1,10-phenanthroline; and O-O is oxalate). In the present study, full geometry optimization (B3LYP/3-21G**) has been performed without symmetry constraints and a comparison with some available experimental results has been made. Bond distances, equilibrium geometries, harmonic frequencies, and net atomic charges from Mulliken populations are presented. Since the principle of hard and soft acids and bases has been widely used to explain the stability of these complexes, we also calculated and analyzed the global hardness and the local softness. The results of the global hardness do not support the commonly held idea that harder acids will preferably bind to harder ligands, while softer acids will bind to softer ligands. Interestingly, local softness and electron affinity correlate well with the formation constants of these compounds and provide an explanation of the reactivity behavior. The present results may help to rationalize the stability and reactivity of these systems.     

Theoretical study of the corrosion inhibition of some bipyrazolic derivatives: a conceptual DFT investigation

Corrosion inhibition of copper through six bipyrazolic compounds has been elucidated by means of density functional theory (DFT)-derived reactivity indexes. The DFT calculated parameters and experimental corrosion inhibition efficiency (IE%) indicate that their inhibition effect is closely related to the frontier orbital energies, polarizability, electronic chemical potential and global nucleophilicity. The quantum chemistry calculations were performed at the B3LYP/6-31G (d) level. The theoretical results, predicted using DFT-based reactivity indexes, are in good agreement with experimental outcomes.     

1H and 13C NMR characterization of pyridinium-type isoniazid-NAD adducts as possible inhibitors of InhA reductase of Mycobacterium tuberculosis

Oxidative activation of the antituberculous drug isoniazid (INH) in the presence of the NADH cofactor gives a pool of INH-NAD adducts proposed to be involved in the mechanism of action of this drug through inhibition of the reductase InhA. Among these adducts and besides dihydropyridine derivatives, two pyridinium-type isoniazid-NAD adducts were shown to be formed in solution and have been fully characterized by 1H/13C NMR and MS. One of them results from the oxidation of dihydropyridine-type INH-NAD adducts. The spectral data strongly support its existence under two epimeric structures. These epimers arise from a cyclization process between the carboxamide group and the ketone function with the creation of a new chiral center at C-7. The second pyridinium-type adduct was formed in acidic solution by dehydration of the cyclized dihydropyridine-type INH-NAD adducts and also exists as a cyclized structure. Both of these pyridinium-type compounds were inactive as inhibitors of InhA activity and can be considered as deactivated species.     

Segmented polyurethane-based microparticles: Synthesis, properties, and isoniazid encapsulation and kinetics of release

New polyurethane microcapsules incorporated with an antituberculous drug, isoniazid, have been synthesized through the interfacial polycondensation of tolylene 2,4-diisocyanate with different poly(ethylene glycols) in a water-toluene emulsion. As the poly(ethylene glycol) chain is elongated, the conversion of diisocyanate decreases with time; the content of urea groups in polyurethanes increases; and the morphology of capsule walls changes, with the walls becoming looser. At high poly(ethylene glycol) concentrations, the efficiency of isoniazid encapsulation decreases owing to displacement of the drug into the organic phase. An increase in the poly(ethylene glycol) concentration above 50 vol % leads to densification of polymer capsule walls because of enhancement of the diffusive accessibility of the monomer. As a result, the release of isoniazid decelerates almost twofold.     

Hybrid compounds of <Emphasis Type="Italic">ent</Emphasis>-beyerane diterpenoid isosteviol with pyridinecarboxylic acid hydrazides. Synthesis,structure, and antitubercular activity

Hybrid compounds derived from natural diterpenoid isosteviol and antitubercular drug isoniazid (isonicotinic acid hydrazide) and its isomers (nicotinic and 2-picolinic acid hydrazides) were synthesized, and their structure in crystal and in solution was studied. The newly synthesized compounds were found to inhibit Micobacterium tuberculosis (H₃₇R_V strain) in vitro, the minimal inhibitory concentration being 10–20 μg/ml.     

Synthesis,coordination behavior,and investigations of pharmacological effects of some transition metal complexes with isoniazid Schiff bases

Two isoniazid Schiff bases, N-isonicotinamido-2-furanketimine (INH-F¹) and N-isonicotinamido-5-methyl-2-furanketimine (INH-F²), possessing potential N and O coordination sites have been prepared by the reaction of isoniazid with 2-acetylfuran and 2-acetyl-5-methylfuran, respectively. Complexes of Pd(II) and Pt(II) have been prepared and characterized by elemental analyses, melting point determinations and electronic, infrared, ¹H NMR, ¹³C NMR spectral studies, and X-ray powder diffraction studies. In all the complexes, the monobasic bidentate nature of the ligand is evident. Antibacterial and antifungal studies of these compounds against various pathogenic bacterial and fungal strains have been carried out. Both the ligands and their metal chelates were active against all the microbial strains investigated. However, the chelates were found to be more active than the ligands. The antimycobacterial activity of the ligands and their metal complexes has been evaluated against Mycobacterium smegmatis, which showed clear enhancement in this activity upon metal complexation with Schiff bases.     

Structural characterization, solution studies, and DFT calculations on a series of binuclear gold(III) oxo complexes: relationships to biological properties

A series of structurally related oxo-bridged binuclear gold(III) compounds, [Au2(mu-O)2(N;N)2](PF6)2, where N;N is 2,2'-bipyridine or a substituted 2,2'-bipyridine, have recently been shown to exhibit appreciable stability under physiological-like conditions and to manifest important antiproliferative effects toward selected human tumor cell lines (J. Med. Chem. 2006, 49, 5524). The crystal structures of four members of this series, namely, [Au2(mu-O)2(bipy)2](PF6)2, cis-[Au2(mu-O)2(6-Mebipy)2](PF6)2, trans-[Au2(mu-O)2(6-oXylbipy)2](PF6)2, and [Au2(mu-O)2(6,6'-Me2bipy)2](PF6)2, have been solved here and the respective structural parameters comparatively analyzed. Remarkably, all of the compounds contain a common structural motif consisting of a Au2O2 "diamond core" linked to two bipyridine ligands in a roughly planar arrangement. Interestingly, introduction of different kinds of alkyl or aryl substituents on the 6 (and 6') position(s) of the bipyridine ligand leads to small structural changes that nonetheless greatly affect the reactivity of the metal centers. The chemical behavior of these compounds in solution has been studied in detail, focusing in particular on the electrochemical properties. Some initial correlations among the structural parameters, the chemical behavior in solution, and the known cytotoxic effects of these compounds are proposed. Notably, we have found that the 6,6'-dimethyl-2,2'-bipyridine derivative, which showed the largest structural deviations with respect to the model compound [Au2(mu-O)2(bipy)2](PF6)2, also had the highest oxidizing power, the least thermal stability, and the greatest cytotoxic activity. The positive correlation that exists between the oxidizing power and the antiproliferative effects seems to be of particular interest. Moreover, the electronic structures of these compounds were extensively analyzed using DFT methods, and the effects of the various substituents on reactivity were predicted; overall, very good agreement between theoretical expectations and experimental data was achieved. In turn, theoretical predictions offer interesting hints for the design of new, more active binuclear gold(III) compounds.     

Correlation between isoniazid resistance and superoxide reactivity in mycobacterium tuberculosis KatG

Isoniazid is an antituberculosis prodrug that requires activation by the catalase-peroxidase (KatG) of Mycobacterium tuberculosis. The activated species, presumed to be an isonicotinoyl radical, couples to NADH forming an isoniazid-NADH adduct that ultimately confers antitubercular activity. We have compared the catalytic properties of three KatGs associated with isoniazid resistance (resistance mutation KatGs, (RM)KatGs: R104L, H108Q, S315T) to wild-type enzyme and two additional lab mutations (wild-type phenotype KatGs, (WTP)KatGs: WT KatG, Y229F, R418L). Neither catalase nor peroxidase activities, nor the presence/absence of the Met-Tyr-Trp cross-link (as probed by LC/MS on tryptic digests of the protein), exhibited any correlation with isoniazid resistance. The yields of isoniazid-NADH adduct formed were determined to be 1-5, 4-12, and 20-70-fold greater for the (WTP)KatGs than the (RM)KatGs for the compound I, II, and III pathways, respectively, strongly suggesting a role for oxyferrous KatG (supported by superoxide consumption measurements) that correlates with drug resistance. Stopped-flow UV-visible spectroscopic studies revealed that all KatGs were capable of forming both compound II and III intermediates. Rates of compound II decay were accelerated 4-12-fold in the presence of isoniazid (vs absence) for the (WTP)KatGs but were unaffected by the drug for the (RM)KatGs. A mechanism for isoniazid resistance which accounts for the observed reactivity for each of the compound I, II, and III intermediates is proposed and suggests that the compound III pathway may be the primary factor in determining overall isoniazid resistance by specific KatG mutants, with secondary contributions arising from the compound I and II pathways.     

Simultaneous determination of first-line anti-tuberculosis drugs and their major metabolic ratios by liquid chromatography/tandem mass spectrometry

Monitoring of anti-tuberculosis drug concentrations and dose adjustment can be helpful in cases that show poor response to treatment. Here, we describe a method that can rapidly and simultaneously measure the blood concentrations of four anti-tuberculosis drugs (isoniazid, rifampicin, pyrazinamide, and ethambutol) and two major metabolic ratios (acetylisoniazid/isoniazid and 25-desacetylrifampicin/rifampicin) using high-performance liquid chromatography/tandem mass spectrometry (HPLC/MS/MS). A C18 reversed-phase column and gradients of methanol in 0.3% formic acid and water were used for HPLC separation. The drug concentrations were determined by multiple reaction monitoring in positive ion mode and the assay performance was evaluated. We determined peak concentration ranges for each drug and acetylisoniazid/isoniazid and 25-desacetylrifampicin/rifampicin ratios by analyzing 2-h post-dose samples in patients treated with standard dosing as a first-line treatment. The preparation of 20 samples including two steps of deproteinization with 50% and 100% methanol was performed within 20 min and chromatographic separation was achieved within 4 min/sample. Interassay calibration variability data obtained over concentrations of 0-8 microg/mL for isoniazid and ethambutol and 0-80 microg/mL for rifampicin and pyrazinamide showed a linear and reproducible curve. Within-run and between-run imprecision (CVs) were 1.9-5.5% and 3.5-10.5% and the lower limits of detection and quantification were 0.01-0.5 microg/mL and 0.05-1.0 microg/mL, respectively. The isoniazid concentration was found to be inversely correlated to the acetylisoniazid/isoniazid ratio (R=-0.739, P<0.001). The devised method allows for the simple, rapid, sensitive and reproducible quantification of isoniazid, rifampicin, pyrazinamide, ethambutol and their two metabolic ratios and should be helpful for therapeutic drug monitoring in tuberculosis patients.     

Reactivity indices as a measure of rate constants for protonation of radical anions and dianions

The DFT-based reactivity indices were used to describe protonation reactions of radical anions (RA) and dianions (DA) of aromatic compounds. A correlation between the experimental rate constants for protonation and the global reactivity indices was found. The indices were expressed through the electron affinities and ionization energies computed at the B3LYP level of theory. The protonation reactions of RA and DA of aromatic compounds are correctly described by the reactivity indices calculated as the inverse of the difference between the formal formation potential of RA (or DA) and the formal reduction potential of the proton donor.     

Structures,stabilities, and electronic properties of fullerene C36 with endohedral atomic Sc,Y, and La: A dispersion‐corrected DFT study

The M@C₃₆ compounds form a family of small endohedral metallofullerenes. Recently, these have been detected as the smallest endohedral compounds formed with Sc, Y, and La. For the first time, these compounds are studied theoretically. Calculations obtained at the dispersion‐corrected DFT level PBE‐D3(BJ)/def2‐TZVP agree admirably with experimental results. The zero‐point energy corrected binding energies can explain the lower abundance of La@C₃₆ in comparison with Sc@C₃₆ and Y@C₃₆. Their small HOMO‐LUMO gaps denote high reactivity. The bond between Y and Sc with the cage is mostly covalent. In contrast, La is located at the fullerene's center with an ionic interaction; all metals transferred charge to the cage. Furthermore, La@C₃₆ was found in doublet state and the others preferred the quartet state. To conclude, according to the analysis of aromaticity performed by the NICS(0)_iso index, the insertion of none of these metals increase the aromaticity.     

Macrocyclic Cr3+, Mn2+ and Fe3+ complexes of a mimic SOD moiety: Design,structural aspects,DFT, XRD,optical properties and biological activity

A novel SOD-like macrocycle “H₂DPD” and its trivalent chromium, iron and divalent manganese complexes have been isolated and characterized using the conventional tools. The macrocycle was prepared by 2:2 condensation of P-phenylenediamine with 5,5-dimethyl1,3-cyclohexanedione. IR and electronic spectral data suggested that H₂DPD coordinates to the metal ion as N₄ tetradentate donor with two Cl⁻ occupying the remaining two sites of the distorted octahedron. XRD spectrum of Cr³⁺ complex indicated that the complex crystallizes in a face-centered monoclinic structure with lattice parameters: a = 10.9380 Å; b = 12.4870 Å; c = 12.4600 Å, α = γ = 90° and β = 111.430 with space group P 1 21/c 1 (14). The energy gap (E_HOMO-E_LUMO), molecular electrostatic potential map (EPM) of title compounds, bond length, bond angle, as well as global and local reactivity were estimated using DFT method. The E_g values obtained from electronic spectra of Cr³⁺, Mn²⁺ and Fe³⁺ complexes were found to be 1.284, 1.220 and 1.138 eV, respectively which are in accordance with those evaluated by DFT revealing semiconductor nature. Also, the thermal degradation of all title compounds was carried out and the kinetic parameters were evaluated using Coats-Redfern and Horowitz-Metzger equations. Moreover, the compounds have screened for antibacterial as well as superoxide mimic activities. Cr³⁺ complex exhibited the most significant potent activity against all bacterial strains. With respect to SOD-like activity, the macrocycle showed the most remarkable SOD-like activity comparable to the standard drug, ascorbic acid.