Quantum chemistry studies of unbranched fluoropolymers

The results of quantum chemistry calculations of energy and topology parameters, vibration and NMR spectra of model fluorocarbon and unbranched hydrocarbon molecules are presented in this work. The formation of radicals and branches in fluorocarbon molecules and mechanisms of hydrogen substitution by fluorine at fluorination of hydrocarbon paraffins and polymers are discussed based on obtained results.     

The direct fluorination of hydrocarbon polymers

A new technique for direct fluorination has been used to prepare several new fluorocarbon polymers. The direct fluorination of poly-p-xylylene, polyisobutylene, Novolac and a highly crosslinked phenolic resin has produced fluorocarbon polymers which bear a strong structural resemblance to their hydrocarbon polymer precursors, though some crosslinking may occur. The thermal properties of these polymers have been investigated by DSC and TGA techniques.     

Synthesis of associating poly(acrylic acid) in supercritical carbon dioxide and its solution properties

Hydrophobically associating polymers have been synthesized in supercritical carbon dioxide by copolymerization of acrylic acid with different amounts of acrylate with hydrocarbon or fluorocarbon groups. It was found that conversion of hydrocarbon comonomers was above 95% whereas that for fluorocarbon comonomers was only about 50%. In addition, large amounts of hydrophobic groups could be easily introduced to poly(acrylic acid) by reaction in supercritical carbon dioxide. The solution properties were investigated by rheology. The results indicated that intermolecular association of the copolymer was strong and viscosity was maximum under acidic conditions. In aqueous solutions fluorocarbon hydrophobes associated much more strongly than the hydrocarbon variety, but the viscosifying effect of PAAC-18 series copolymers in 2% (w/w) solution was more pronounced than that of the PAAF series, results which did not agree with the conclusions of Ravey and Stébé. It was also found that the thixotropy behavior of copolymer solution at pH 3.2 was more complex than that at pH 5.0, at which pseudoplasticity only was observed for solutions of all copolymers. Contact angles of copolymer solutions on a glass sheet were measured. The data indicated that contact angles of hydrocarbon-modified polymers were smaller than those of fluorocarbon analogues. As time passed the contact angle became smaller and smaller. Fluorocarbon analogues were better than hydrocarbon analogues, and longer hydrophobic chains were better than shorter chains, at maintaining the hydrophobic character of the surface.     

A fluorine-containing hydrophobically associating polymer. I. Synthesis and solution properties of copolymers of acrylamide and fluorine-containing acrylates or methacrylates

Fluorine-containing hydrophobically associating polymers have been synthesized by copolymerization of acrylamide with a small amount of an acrylate or methacrylate having a fluorocarbon containing ester group. It was found that hydrophobic associations occurring between these fluorocarbon chains was stronger than the interactions of the corresponding hydrocarbon comonomers and depend on the length of the fluorocarbon chain. The rheological properties of the copolymer solutions were studied. The solutions were found to be highly pseudoplastic but the viscosity loss was completely reversible upon removal of shear. Evidence for hydrophobic association of the fluorocarbon groups was obtained by the dependence of the Brookfield viscosity on temperature, the addition of NaCl, and the addition of organic solvents, urea, and surfactants.     

Temperature dependence of radiation effects on polymers

Temperature dependence of radiation effect on various polymers including hydrocarbon and fluorocarbon polymers was investigated. Gas evolution and mechanical properties were measured in a wide range of temperatures. G-values of chain scission and crosslinking were estimated. It has been made clear from those experimental results that radiation effect be profoundly affected by temperature. Particularly, significant changes of radiation effect in the melting region were found out.     

Investigation in monolayers of double-chain fluorocarbon amphiphiles Effect of headgroups on molecular packing and interaction between hydrocarbon and fluorocarbon monolayers

The surface pressure-area diagrams of double-chain fluorocarbon amphiphiles with different headgroup compositions show that the amphiphiles arrange almost perpendicularly to the water subphase and the structure of headgroups exerts significant influence on the amphiphile packing. Strong hydrogen bonding and weak electrostatic interaction favor the formation of stable monolayers. Perfluorooctanoic acid (FOA) cannot form monolayer at water/air interface and can only form liquid monolayer in subphase of calcium nitrate solution. Complete phase separation of palmitic acid and a fluorocarbon amphiphile with shorter hydrocarbon spacer group, 1, could be demonstrated in monolayers by using the phase rule of Crisp. The creation of phase-separated monolayers is possible when the monolayer is composed of a mixture of palmitic acid and a fluorocarbon amphiphile with longer hydrocarbon spacer group, 2. It can be suggested that the miscibility of hydrocarbon amphiphiles with fluorocarbon amphiphiles is determined by the hydrocarbon fraction of fluorocarbon amphiphiles.     

Wettability of polymeric solids by ternary mixtures composed of hydrocarbon and fluorocarbon nonionic surfactants

Contact angle (θ) measurements on poly(tetrafluoroethylene) (PTFE) and polymethyl methacrylate (PMMA) surface were carried out for the systems containing ternary mixtures of surfactants composed of: p-(1,1,3,3-tetramethylbutyl)phenoxypoly(ethylene glycols), Triton X-100 (TX100), Triton X-165 (TX165) and Triton X-114 (TX114), and fluorocarbon surfactants, Zonyl FSN100 (FSN100) and Zonyl FSO100 (FSO100). The aqueous solutions of ternary surfactant mixtures were prepared by adding TX114, FSN100 or FSO100 to binary mixtures of TX100+TX165, where the synergistic effect in the reduction of the surface tension of water (γ(LV)) was determined. From the obtained contact angle values, the relationships between cosθ, the adhesion tension and surface tension of solutions, cosθ and the reciprocal of the surface tension were determined. On the basis of these relationships, the correlation between the critical surface tension of PTFE and PMMA wetting and the surface tension of these polymers as well as the work of adhesion of aqueous solutions of ternary surfactant mixtures to PTFE and PMMA surface were discussed. The critical surface tension of PTFE and PMMA wetting, γ(C), determined from the contact angle measurements of aqueous solutions of surfactants including FSN100 or FSO100 was also discussed in the light of the surface tension changes of PTFE and PMMA under the influence of film formation by fluorocarbon surfactants on the surface of these polymers. The γ(C) values of the studied polymeric solids were found to be different for the mixtures composed of hydrocarbon surfactants in comparison with those of hydrocarbon and fluorocarbon surfactants. In the solutions containing fluorocarbon surfactants, the γ(C) values were different taking into account the contact angle in the range of FSN100 and FSO100 concentration corresponding to their unsaturated monolayer at water-air interface or to that saturated.     

Electron spin resonance spectra of polymers during fluorination

ESR spectra characteristic of peroxy radicals appeared rapidly in all of eleven hydrogen-containing polymers examined when treated with dilute fluorine. These radicals presumably result from the reaction of hydrocarbon and fluorocarbon radicals, existing at undetectably low steady-state concentrations, with the oxygen impurity content of commercial fluorine. In poly(vinylidene fluoride) films of thickness 11 and 58 μm the radical contents were nearly proportional to surface area rather than volume, in agreement with earlier reports of a shallow depth of penetration. Some polymers exhibited also or exclusively a broad spectral component, varying in character with the polymer; examples are polystyrene, polyethylene, poly (vinyl chloride), poly(vinylidene chloride), polyoctafluoropentadiene, polyhexafluoropropene, and a fluorinated graphite. The broad spectral component did not react with ordinary radical scavengers such as propylene and oxygen, and is probably not due to a fluorocarbon radical but to unknown transition metal fluorides.     

Interactions in water of alkyl and perfluoroalkyl surfactants with fluorocarbon- and hydrocarbon-modified poly(N-isopropylacrylamides)

Fluorescence spectroscopy and isothermal titration calorimetry (ITC) have been used to study the interactions in water at 25 degrees C of two anionic surfactants--sodium dodecyl sulfate (SDS) and sodium perfluorononanoate (SPFN)--with various pyrene-labeled hydrophobically modified poly(N-isopropylacrylamides) (HM-PNIPAM) grafted at random with small amounts of fluorocarbon chains (1H,1H-perfluorooctyl, CH2C7F15); (PNIPAM-F), or (n-octadecyl, C18H37) (PNIPAM-HPy) or both (PNIPAM-F/HPy). In aqueous solution, the copolymers form micellar structures consisting of a loose corona of hydrated poly(N-isopropylacrylamide) chains and a hydrophobic core rich in hydrocarbon or fluorocarbon groups. From fluorescence studies based on changes in the ratio of pyrene excimer to monomer emission intensity, it has been established (1) that mixed SDS/C18H37 clusters form along the polymer chain upon addition of SDS to either PNIPAM-HPy or PNIPAM-F/HPy and (2) that SPFN does not interact with the hydrocarbon-rich microdomains of the polymeric micelles. The conclusions were corroborated by ITC experiments, which yield the overall enthalpy change associated with polymer/surfactant interactions. They provided strong evidence (1) that SDS molecules adsorb along the PNIPAM main chain but do not mix with the fluorocarbon-rich microdomains of PNIPAM-F or PNIPAM-F/HPy and (2) that SPFN associates with the perfluorocarbon substituents of PNIPAM-F and PNIPAM-F/HPy but has a poor affinity for the polymer chain.     

Cylindrical micelles of alpha-fluorocarbon-omega-hydrocarbon end-capped poly(N-acylethylene imine)s

Micelles of ABC block copolymers with varying degrees of polymerization of the B block (n) and constant lengths of the A and C blocks were investigated by small-angle X-ray scattering (SAXS), analytical ultracentrifugation (AUC), surface tension measurements, and isothermal titration calorimetry. The copolymers consisting of hydrophilic poly(N-acylethylene imine)s, end-capped with a hydrophobic fluorocarbon and a hydrocarbon block, are polymeric surfactants (gamma = 35 mN/m). They form cylindrical micelles with radii of 3.0 nm (n = 35), 3.8 nm (n = 57), and 4.0 nm (n = 72). Their lengths are about 20 nm. The micelles can be doped with 1,4-diiodoperfluorobutane for the polymers with n = 57 and 72 but not for n = 35. We assume that the doped micelles form distinct fluorocarbon domains, which are able to incorporate selectively the fluorocarbon dopant. The work presented here is a contribution to the development of multicompartment micelles.     

A quantum chemical NMR study of branched and unbranched fluoropolymers

The work demonstrates the results of quantum chemical calculations of ¹⁹F and ¹³C NMR spectra of model fluorocarbon C _n F_2n+2 molecules with various configurations and hydrocarbon chain molecules. The possibilities to determine the chain length, formation of branches, identification of fluorine substitution for hydrogen during the fluorination of hydrocarbon paraffins and polymers are discussed.     

Fluorocarbon Surfactant Polymers: Effect of Perfluorocarbon Branch Density on Surface Active Properties

We describe a series of fluorocarbon surfactant polymers designed for modifying fluorocarbon surfaces such as poly(tetrafluoroethylene). Novel fluorocarbon surfactant polymers poly(N-vinyldextranaldonamide-co-N-vinylperfluoroundecanamide), in which hydrophilic dextran oligosaccharides and hydrophobic perfluoroundecanoyl groups were incorporated sequentially onto a poly(vinylamine) backbone, were synthesized and characterized by FT-IR, NMR, and XPS spectroscopy. By adjusting the feed ratio of dextran to fluorocarbon branches, surfactant polymers with different hydrophilic/hydrophobic balances were prepared. The surface activity of the surfactants at the air/water interface was demonstrated by significant reductions in water surface tension. Surfactant adsorption and adhesion at the solid PTFE/aqueous interface were examined under well-defined dynamic flow conditions, using a rotating disk system. The surface activity at the air/water interface and adhesion stability on PTFE under an applied shear stress both increase with increasing density of fluorocarbon branches on the polymer backbone. The results show that stable surfactant adhesion on PTFE can be achieved by adjusting the hydrophilic dextran to hydrophobic fluorocarbon branch ratio.     

Characteristics of mixed bilayers of surfactants formed on alumina

The interaction between hydrocarbon and fluorocarbon surfactants on-alumina has been studied through the dispersion behavior of-alumina. When a low concentration of anionic hydrocarbon or fluorocarbon surfactant as a first additive is added to positively charged alumina, the alumina flocculates. The flocculated alumina redisperses upon addition of different surfactant from the first one by the manner that the hydrophobic parts of hydrocarbon and fluorocarbon surfactants are in contact with hydrophobic parts of the first surfactants and the hydrophilic polar groups direct out to liquid phase, resulting in the formation of mixed bilayers on the alumina. From the measurements of mean particle size, zeta potential of the alumina, and adsorbed amount of surfactants, the mixed bilayers consisting of anionic fluorocarbon-noniomc hydrocarbon surfactants and of anionic fluorocarbon-noioic hydrocarbon ones are found to be formed more preferentially than anionic hydrocarbon-anioic fluorocarbon surfactants. The property of the mixed bilayer on the alumina is also discussed using the fluorescence spectra of pyrene.     

Mixed micellar phases of nonmiscible surfactants: mesoporous silica with bimodal pore size distribution via the nanocasting process

Highly organized mesoporous silica monoliths were reproducibly prepared by nanocasting mixtures of fluorinated nonionic surfactants and micelles of two hydrocarbon block copolymers. It is the special feature of this fluorocarbon/hydrocarbon template mixture that they form not mixed micelles but individual micelles instead. By careful analysis of the pore architectures by gas sorption measurements and transmission electron microscopy in dependence on the relative template concentration, two different situations could be identified: (a) mesoscopically demixed samples and (b) mixed micellar phases where the two different micelles are packed in some type of organized alloy phase. Besides identification of such mixed phases for the first time for fluorocarbon/hydrocarbon mixtures, the resulting porous systems with controlled bimodal pore size distribution might be interesting from a materials perspective.     

Fluorocarbon polymerizable surfactants: viscometric behavior, micellar polymerization and interactions with associating polymers

 The micellar aggregation of two fluorocarbon surfactants bearing a polymerizable acrylamido group and differing only in the degree of amido substitution (CONH or CONC₂H₅) has been investigated by viscometry. The two surfactants exhibit distinct solution properties with a micellar growth occurring at a much lower concentration for the N-monosubstituted sample which shows in addition a shear thickening and rheopectic behavior. The ability of the latter surfactant to form hydrogen bonding is responsible for this difference in behavior. Micellar copolymerization of acrylamide with these surfactants or with a hydrocarbon analogue gives copolymers with a polysoap-like behavior. The copolymers in aqueous solution show a pronounced intramolecular hydrophobic aggregation expressed by relatively low-viscosity values when compared with those of other hydrophobically modified water-soluble polymers reported in the literature. Surfactant–polymer mixed systems do not show a strong incompatibility between fluorocarbon and hydrocarbon moieties. Received: 24 March 1998 Accepted: 30 June 1998     

Separation of fluorinated amino acids and oligopeptides from their non-fluorinated counterparts using high-performance liquid chromatography

Chromatographic conditions for the separation of fluorinated amino acids and oligopeptides from their non-fluorinated counterparts were explored. The separation of six pairs of analytes, including both aromatic and aliphatic fluorocarbons, was investigated at various temperatures using both hydrocarbon and fluorocarbon columns and eluents. Our results show that when hydrocarbon eluents are used, fluorocarbon column provides better separation of fluorinated amino acids or oligopeptides from their non-fluorinated counterparts; when fluorocarbon eluents are used, hydrocarbon column provides better separation of fluorinated amino acids or oligopeptides from their non-fluorinated counterparts. These chromatographic behaviors reflect the fluorophilicity possessed by fluorinated amino acids and oligopeptides.     

FUNCTIONAL POLYMERS 65. SYNTHESIS AND BRIEF CHARACTERIZATION OF SURFACE ACTIVE 2(2-HYDROXYPHENYL)2H-BENZO-TRIAZOLE ULTRAVIOLET STABILIZERS

A number of 2(2-hydroxyphenyl)2H-benzotriazoles substituted in the 5-position with reactive hydroxyl and carboxyl groups have been synthesized. They include compounds with a tert butyl substitution in the 3-position or without substitution. The latter compounds were subjected to a reaction with N-hydroxy-methyl-(meth)acrylamide to form acrylic polymerizable 3(meth)acrylamidomethyl-2(2-hydroxyphenyl)2H-benzotriaz-oles. Hydroxyl reactive compounds were allowed to react with long chain acids, compounds with carboxyl groups with long chain hydrocarbon, fluorocarbon or silicon oligomer alcohols. The polymerizable 2(2-hydroxyphenyl)2H-benzotriazoles were then copolymerized with methyl methacrylate. Films made from such polymers showed by contact angle measurements, substantial migration of the fluorocarbon or silicon component to the surface of the film.     

Nanomosaic: formation of nanodomains confined in a two-dimensional molecular plane

Atomic force microscopy observations of a (hydrocarbon guanidinium/fluorocarbon carboxylic acid) mixed monolayer revealed that a nanoscopic phase-separated structure was formed by a combination of attractive interaction between the oppositely charged head groups and repulsive phase separation of the hydrocarbon and fluorocarbon chains.     

Major influence of the hydrophobic chain length in the formation of poly(3,4-propylenedioxypyrrole) (PProDOP) nanofibers with special wetting properties

Several species in nature have special wetting properties such as Lotus leaves or rose petals. Both the surface morphology and surface energy play a fundamental role. In particular, nanofibers were found to be exceptional surface structures due to a possible control in both water hydrophobicity and water adhesion as a function of their length, diameter, their orientation to the substrate or the spacing between them. Here, in the aim to prepare nanofibers with high liquid-repellent properties using conducting polymers, we have synthesized 3,4-propylenedioxypyrrole (ProDOP) derivatives with hydrocarbon and fluorocarbon chains in the 3-position, keeping the NH group free (important condition to lead to nanofibers thanks to hydrogen bonds). Different hydrocarbon and fluorocarbon chain lengths are studied. We obtain, for example, nanofibers of different size with octyl, decyl and C₄F₉ chains (intermediate hydrophobicity) with different liquid-repellent properties and liquid adhesion properties. More precisely, PProDOP-H₈ is close to superhydrophobic properties (low water adhesion) while PProDOP-H₁₀ is parahydrophobic (high water adhesion). This works could find many potential applications in the nanotechnology field as water harvesting surfaces, liquid separation membrane, and in anti-bioadhesion. Due to the presence of free NH groups, these materials could also be used as pH-sensitive materials while the nitrogen could also be easily functionalized.     

Characterization and phase transition study for vesicles of fluorocarbon amphiphiles with 1,3-disubstituted glycerol structure

This paper presents the preparations and characterization of vesicles of four new fluoro-carbon amphiphiles with 1,3-disubstituted glycerol structure in common and different headgroups(OH, 1; CO_2H, 2; quaternary ammonium salt, 3; and pyridinium salt, 4). These vesicles havehigher transition temperature due to the stronger hydrophobic interaction between fluorocarbonchains. Addition of fluorocarbon additives with carboxylic acid or quaternary ammonium salt headgroup respectively shows different influences on phase behavior of vesicles of 2. These results arediscussed based on the interaction within headgroup, hydrophobicity and specific mutahydrophobicinteraction between fluoro- and hydrocarbon chains.