Self-assembly in linker-modified microemulsions

Linker molecules are added to microemulsion systems to enhance the interaction between the surfactant and oil (lipophilic linkers) or water (hydrophilic linkers) phases. Previous results suggest that when lipophilic and hydrophilic linkers are combined they behave as a self-assembled surfactant at the oil/water interface. In this work we investigate this self-assembly phenomenon as a function of surfactant, linker and electrolyte concentration. We find that middle phase microemulsion appears at a specific concentration higher than the critical micelle concentration (CMC), which we denote as the critical middle phase microemulsion concentration (CmicroC). When the lipophilic linker dodecanol is added in equimolar ratio to the hydrophilic linker sodium mono- and dimethyl naphthalene sulfonate (SMDNS), the middle phase microemulsion did not appear until the surfactant sodium dihexyl sulfosuccinate (SDHS) concentration was larger than the CmicroC of the SDHS-alone system. Dodecanol is shown to segregate near the surfactant tails following a Langmuir-type adsorption process. This segregation is not affected by the electrolyte concentration but is significantly reduced when the surfactant (SDHS) concentration approaches the CmicroC. The data suggest that the self-assembly between hydrophilic and lipophilic linkers to form middle phase microemulsions is only possible if a minimum amount of surfactant is present.     

Modeling solubilization of oil mixtures in anionic microemulsions II. Mixtures of polar and non-polar oils

Polar/amphiphilic oils, called lipophilic linkers, are sometimes added to oil-water-ionic surfactant microemulsions in order to increase the solubilization of hydrophobic oils. The solubilization increase has been well documented for a number of systems. However, mathematical models to calculate the solubilization increase have been proposed only for optimum microemulsions (i.e., middle phase microemulsions solubilizing equal volumes of oil and water). In this paper we propose a model, which predicts solubilization enhancement for non-optimum microemulsion systems as well. The model is an extension of the net-average curvature model of microemulsion. The net-average curvature model is combined with a surface activity model to account for the increased palisade layer solubilization due to the presence of the polar/amphiphilic oil component. New non-linear mixing rules are also incorporated to account for the optimum salinity and the characteristic length variation of the anionic surfactant microemulsion as a function of the lipophilic linker concentration. The model predicts the effect of the lipophilic linker and the electrolyte concentration on the oil solubilization in accordance with the experimental results.     

Engineering cosmetics using the Net-Average-Curvature (NAC) model

The hydrophilic–lipophilic balance (HLB) and the packing parameter have been guiding formulators for the last 70 years. However, these indicators look at the surfactant only without considering formulation conditions such as temperature, salinity, and oil hydrophobicity. The hydrophilic–lipophilic difference (HLD) consists of two empirical correlations that consider the entire set of formulation conditions, serving as a unified theory of hydrophobicity that connects to HLB, packing parameter, and phase inversion temperature (PIT). Target HLD values for cosmetic formulations are discussed. The HLD alone, however, does not provide formulation properties such as solubilization capacity, phase diagrams, or interfacial tension. To this end, the net-average curvature (NAC) model interprets the HLD as a dimensionless interfacial curvature, using this approach to predict formulation properties and phase diagrams. The use of the HLD-NAC model in the design of a skin cleansing formula is illustrated via a predicted ‘fish’ phase diagram required to identify preferred compositions.     

多元体系油水界面上常见表面活性剂行为的分子动力学模拟

采用分子动力学模拟研究了以十二烷基苯磺酸钠(SDBS)为代表的阴离子型表面活性剂,以十二烷基三甲基溴化铵(DTAB)为代表的阳离子型表面活性剂,以壬基酚聚氧乙烯醚(NPE)为代表的非离子型表面活性剂,以十二烷基二甲基甜菜碱(Betaine)为代表的两性表面活性剂及空白实验.模拟了表面活性剂在油水界面上的行为,考察了表面活性剂分子与石油分子之间的径向分布函数(RDF)、石油分子在竖直方向的均方位移(MSD)、油水界面张力(IFT)、石油层与岩石层之间的相互作用能、石油层的相对浓度在竖直方向的分布及石油分子质心位置随模拟时间的变化关系等,讨论了不同表面活性剂的洗油性能.结果表明:(1)SDBS,NPE和Betaine分子初始状态下呈近似的规律排列,非极性端部分插入油相中,极性端延伸进入水相中;随后表面活性剂的极性端表现出聚集趋势,逐渐形成一个外部亲油内部亲水的一个胶束状粒子,粒子随模拟的进行逐渐融入到油层当中;DTAB从开始的近似规则排列逐渐变为无规排列,但是始终保持亲油端插入到油相中,亲水端位于油水界面上.(2)表面活性剂分子与石油分子之间的相互作用强弱顺序为Betaine≈DTABSDBSNPE.(3)由质心高度和动力过程中的图像截图分析,表面活性剂洗油效果的顺序为BetaineSDBSNPEDTABNone.模拟结果与实际的驱油结果一致,从分子层面上解释了不同表面活性剂洗油的规律.     

Solubilization and phase equilibria of water-in-oil microemulsions : II. Effects of alcohols, oils, and salinity on single-chain surfactant systems

The solubilization and phase equilibria of w/o microemulsions have been shown to be dependent on two phenomenological parameters, namely the spontaneous curvature and elasticity of the interfacial film, when interfacial tension is very low. The spontaneous curvature of an interface is basically determined by the geometric packing of surfactant and cosurfactant molecules at the interface, whereas the interfacial elasticity is related to the energy required to bend the interface. The droplet size and solubilization of microemulsions is mainly determined by the radius of spontaneous curvature, and is further influenced by interfacial elasticity and interdroplet interactions. A w/o microemulsion with a highly curved and relatively rigid interfacial film can exist in equilibrium with excess water at the solubilization limit due to the interfacial bending stress. Increasing the natural radius and fluidity of the interface can increase the droplet size and hence the solubilization in the microemulsion. On the other hand, a w/o microemulsion with a highly fluid interfacial film can exist in equilibrium with an excess oil phase containing a low density of microemulsion droplets due to attractive interdroplet interaction. Increasing the interfacial rigidity and decreasing the natural radius in this case can increase water solubilization in the microemulsion by retarding the phase separation process. Thus, a maximum water solubilization in a w/o microemulsion can be obtained by minimizing both the interfacial bending stress of rigid interfaces and the attractive interdroplet interaction of fluid interfaces at an optimal interfacial curvature and elasticity. The study of phase equilibria of microemulsions can serve as a simple method to evaluate the property of the interface and provide phenomenological guidance for the formulation of microemulsions with maximum solubilization capacity.     

表面活性剂亲水-亲油能力对动态界面张力的影响

当两个不互溶的液相接触时,如果其中一相或两相含有表面活性物质,就可能产生动态界面张力。两相间的界面张力随时间连续变化,直到平衡为止。在到达平衡的过程中,经常通过一个最低值。酸性油／碱水体系也会出现类似现象。Englind和Berg把动态界面张力解释为表面活性物质在界面上累积的结果,并观察到1,5－戊二醇由白油向水中传质时存在明显的吸附－脱附位垒。Rubin和Radke首次给出了解释酸性原油与碱水溶液接触时产生动态界面张力的物理模型,他们提出在油水上存在一个表面活性物质的脱附位垒,原油中的酸性物质与氢氧化钠在界面上的反应是迅速完成的,而这些物质的脱附,则比较缓慢,从而合理地解释了这一特征。近年来,由于超低界面张力在强化采油中的重要性,国外研究者对酸性油／碱／表面活性剂体系的动态界面张力特征进行了比较系统的研究,但其机理有待进一步探讨,本文通过对正构烷烃／石油磺酸盐体系动态界面张力的研究,考察了吸附－脱附位垒产生的原因、影响因素及其对动态界面张力曲线的影响,对酸性油／表面活性剂体系动态界面张力的机理进行了更深入的探索。     

Molecular dynamics simulation of four typical surfactants at oil/water interface

In the present study, we have performed molecular dynamics simulations to describe the microscopic behaviors of the anionic, nonionic, zwitterion, and gemini surfactants at oil/water interface. The abilities of reducing the interfacial tension and forming the stable interfacial film of the four surfactants have been investigated through evaluating interfacial thickness, interface formation energy and radial distribution function. The results show that the four kinds of surfactants can form in stable oil/water interface of monolayer, and the gemini surfactant can form the more stable monolayer. The results of the above three parameters demonstrate that the gemini surfactant has the best simulation effect in the four surfactants. From the calculated interfacial tension values, the gemini surfactant possess the more powerful ability of reducing the interfacial tension than others, so it is more suitable to be used as the surfactant for flooding. In addition, the effects of different electric field intensities on surfactants were calculated, through the radial distribution function of the hydrophilic group in the surfactant and the oxygen atom in the water. We have found that the adding of the periodic electric field can significantly affect the diffusion behavior of the molecules, and nonionic surfactant has stronger demulsification capability than others.     

Effect of Pentanol Partitioning on Solubilization of Tetrachloroethylene and Gasoline by Sodium Dodecyl Sulfate Micelles

The effect of interfacial pentanol concentrations on solubilization of tetrachloroethylene (PCE) and gasoline by sodium dodecyl sulfate (SDS) micelles was compared to that for dodecane solubilization, which had been measured in a previous study. The solubilization of PCE and gasoline reached their maximum values at a 1 : 3 SDS-to-pentanol molar ratio in the interface. As pentanol concentrations increased beyond that necessary for interfacial saturation, solubilization of PCE and gasoline decreased. This behavior was similar to that observed when dodecane was the oil phase. Electrical conductivity of aqueous SDS/pentanol solutions followed a trend similar to that for oil solubilization, reaching a maximum value at a 1 : 3 molar ratio of SDS to pentanol in the interface. The results of this and previous studies suggest that pentanol partitioning in SDS micelles can be described by a simple two-region model: Region I is the interface between the water-continuous phase and oil and Region II is the micelle inner core. When the mole fraction of pentanol in the interface is less than 0.75, pentanol partitions strongly into Region I, where it acts as a cosurfactant along with SDS and enhances oil solubilization. Above 0.75 mole fraction in the interface, pentanol partitions strongly into Region II, where it acts as a polar oil and competes with other oils for solubilization. Copyright 2001 Academic Press.     

Some aspects of stability of multiple emulsions in personal cleansing systems

The two dominant factors that were found to affect the stability of multiple emulsions in high HLB surfactant systems are the osmotic pressure imbalance between the internal aqueous phase and the external aqueous phase, and the adsorption/desorption characteristics of the emulsifier/surfactant film at the oil/water interface. Synergistic interaction between the low HLB emulsifier and the high HLB surfactant that produces very low interfacial tension of the order of 10(-2) mN/m at the oil/water interface was found to occur in some of the systems investigated. Long term stability was observed in multiple emulsion containing these systems. However, no synergy was observed in systems in which either the oil or the emulsifier, or both, contained unsaturated chains. In fact, desorption of the adsorbed surfactant film was observed in systems containing unsaturated chains. The observed desorption from the interface of the emulsifier in these systems was attributed mainly to the inability of the unsaturated chains to form a close packed, condensed interfacial film. Presence of closely packed, condensed interfacial film is necessary to prevent solubilization of the adsorbed low HLB emulsifier by the high HLB surfactant. Multiple emulsions prepared using systems containing unsaturated hydrocarbons were highly unstable.     

An experimental and computational study of donor–linker–acceptor block copolymers for organic photovoltaics

Block copolymers with donor and acceptor conjugated polymer blocks provide an approach to dictating the donor–accepter interfacial structure and understanding its relationship to charge separation and photovoltaic performance. We report the preparation of a series of donor‐linker‐acceptor block copolymers with poly(3‐hexylthiophene) (P3HT) donor blocks, poly((9,9‐dioctylfluorene)‐2,7‐diyl‐alt‐[4,7‐bis(thiophen‐5‐yl)‐2,1,3‐benzothiadiazole]‐2′,2″‐diyl) (PFTBT) acceptor blocks, and varying lengths of oligo‐ethylene glycol (OEG) chains as the linkers. Morphological analysis shows that the linkers increase polymer crystallinity while a combination of optical and photovoltaic measurements shows that the insertion of a flexible spacer reduces fluorescence quenching and photovoltaic efficiencies of solution processed photovoltaic devices. Density functional theory (DFT) simulations indicate that the linking groups reduce both charge separation and recombination rates, and block copolymers with flexible linkers will likely rotate to assume a nonplanar orientation, resulting in a significant loss of overlap at the donor–linker–acceptor interface. This work provides a systematic study of the role of linker length on the photovoltaic performance of donor–linker–acceptor block copolymers and indicates that linkers should be designed to control both the electronic properties and relative orientations of conjugated polymers at the interface. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 1135–1143     

Mechanism of oil-in-water emulsification using a water-soluble amphiphilic polymer and lipophilic surfactant

A new O/W (oil-in-water) emulsification system was developed using the amphiphilic polymer HHM-HEC (hydrophobically-hydrophilically modified hydroxyethylcellulose) and a lipophilic surfactant. HHM-HEC was used as a thickener and polymeric surfactant, and the addition of small quantities of various types of nonionic lipophilic surfactant (hydrophilic-lipophilic balance <5) decreased the droplet size of several types of oil due to a lowering of the tension at the water/oil interface. The oil droplets were held by the strong network structure of the aqueous HHM-HEC solution, preserving the O/W phase without inversion. These stable O/W emulsions were prepared without the addition of hydrophilic surfactants and thus show improved water repellency.     

Kinetics of solubilization of n-decane and benzene by micellar solutions of sodium dodecyl sulfate

We observed the diminishing of single microscopic oil drops to study the kinetics of solubilization of n-decane and benzene by micellar solutions of sodium dodecyl sulfate (SDS). Each drop is located in a horizontal glass capillary of inner diameter 0.06 cm filled with a thermostated surfactant solution; the small vertical dimension of the cell prevents the appearance of uncontrollable thermal convections. The experiments show that the radius of an n-decane drop decreases linearly with time, whereas for benzene this dependence is nonlinear. To interpret the data, a kinetic model of solubilization is developed. It accounts for the diffusion and capturing of dissolved oil molecules by the surfactant micelles, as well as for the finite rate of oil dissolution at the oil-water interface. By processing the data, we determined the rate constant of solubilization for a given oil and surfactant. It turns out that the elementary act of catching a dissolved oil molecule by a surfactant micelle occurs under a barrier (rather than diffusion) control. The effective rate of solubilization is greater for the oil, which exhibits a higher equilibrium solubility in pure water (benzene), despite the lower value of the solubilization rate constant for this oil.     

Effect of Crude Oil Fractions on Interfacial Tensions of Novel Sulfobetaine Solutions

The dynamic interfacial tensions (IFTs) of two novel zwitterionic surfactants with different hydrophobic groups, alkyl sulfobetaine (ASB), and xylyl substituted alkyl sulfobetaine (XSB), against kerosene, crude oil, and model oils containing crude oil fractions, such as resins, asphaltenes, saturates, aromatics, and acidic fractions, have been investigated by a spinning drop interfacial tensiometer. The experimental results show that XSB solutions show higher interfacial activity than ASB against kerosene because of the larger size of the hydrophobic part of the XSB molecule. The petroleum acids have high interfacial activity and can adsorb onto the interface. For ASB solutions, the synergism mixed adsorption of betaine and acid molecules lowers IFT values. On the one hand, the partly displacement of XSB molecules by petroleum acid at the interface results in the increase of IFTs. Therefore, resins, aromatics, and acidic fractions show strong effects on IFTs of betaine solutions. On the other hand, asphaltenes and saturates have little effect on interfacial properties. Moreover, the hydrophilic part of the betaine molecule at the interface may vary its orientation from vertical to flat with aging time. Therefore, the dynamic IFT curves of ASB solutions against model oils show “V” shape for resins, aromatics, and acidic fractions.     

Studies of synergism/antagonism for lowering dynamic interfacial tensions in surfactant/alkali/acidic oil systems. 1. Synergism/Antagonism in surfactant/model oil systems

Experimental studies are conducted in order to elucidate the mechanisms responsible for synergism/antagonism for lowering dynamic interfacial tension in model oil/surfactant/brine systems. A well-defined model oil is selected for controlled design of experiments, thus enhancing verification of known and unknown mechanisms. The systems examined contain model oils and two petroleum sulfonate solutions. The influence of additives in oil phase, such as carboxylic acids with different chain length, n-octadecanol, and oil soluble surfactant SP-60, on the equivalent alkane carbon number (EACN) values has been examined. The interfacial tensions of different model oils with different EACN values against surfactant solutions with different n(min) values have also been obtained. We find that antagonism has been observed when EACN/n(min) value is far from unity by adding organic components, while synergism has been observed when EACN/n(min) value is close to unity. The results present here suggest that organic additives in oil phase controlled interfacial tension by changing the partition of surfactants in oil phase, aqueous phase, and interface.     

The Wettability Alteration and the Effect of Initial Rock Wettability on Oil Recovery in Surfactant-based Enhanced Oil Recovery Processes

Wettablity alteration of rock surface is an important mechanism for surfactant-based enhanced oil recovery (EOR) processes. Two salt and temperature-tolerant surfactant formulations were developed based on the conditions of high temperature (97–120°C) and high salinity (20 × 10⁴ mg/L) reservoirs where a surfactant-based EOR process is attempted. Both the two sufactant formulations can achieve ultralow interfacial tension level (≤10^?3 mN/m) with crude oil after aging for 125 days at reservoir conditions. Wettability alteration of core slices induced by the two surfactant formulations was evalutated by measuring contact angles. Core flooding experiments were carried out to study the influence of initial rock wettabilities on oil recovery in the crude oil/surfactant/formation water/rock system. The results indicated that the two formulations could turn oil-wet core slices into water-wet at 90–120°C and 20 × 10⁴ mg/L salinity, while the water-wet core slices retained their hydrophilic nature. The core flooding experiments showed that the water-wet cores could yield higher oil recovery compared with the oil-wet cores in water flooding, surfactant, and subsequent water flooding process. The two surfactant formulations could successfully yield additional oil recovery in both oil-wet and water-wet cores.     

Influence of the fat characteristics on the physicochemical behavior of oil-in-water emulsions based on milk proteins-glycerol esters mixtures

Oil-in-water emulsions based on 10% milk protein preparation, 0.3% mono-di-glycerides (MDG) and 8% vegetable oil were prepared for models typifying ice cream formulations. Two MDG (saturated and partially unsaturated) and four fats (oleic oil, hydrogenated and refined coconut oils, refined palm oil) were chosen to investigate the interactions occurring between the oil phase, the MDG and the milk proteins. Influence of temperature (4 °C) and ageing (24 h at 4 °C) was also tested. The emulsions were characterized for protein desorption, particle size distribution and rheological properties. The dynamic surface activity of the milk proteins and the MDG at the oil-water interface was also determined. At 20 °C, emulsions were mostly stabilized by proteins although the protein load at the globule surface strongly depended on the emulsifier and the oil phase natures. A displacement of the proteins adsorbed at the oil droplet interface by the lipid surfactant was a consequence of the temperature decrease and/or ageing step, suggesting a disruption of the interfacial protein interactions. This disruption was more or less marked depending on the physicochemical characteristics of the surfactant and the oil used (amount of crystallized matter, fatty acid chain length and unsaturation degree). In parallel, the variation of the apparent viscosity of the various emulsions upon temperature was well correlated with the solid fat content. On the whole, the results obtained suggested that not only the surfactant molecules, i.e. emulsifiers and proteins, but also the fat used in the emulsion formulation participated in the development of the interface characteristics and rheological properties.     

FORMATION OF MICROEMULSION AND LIQUID CRYSTAL IN BIOCOMPATIBLE SUCROSE ALKANOATE SYSTEMS

Sucrose monoalkanoates (SE) form microemulsions by mixing with lipophilic cosurfactants such as the middle-chain alcohols, or sucrose polyalkanoates. In the case that sucrose monododecanoate is combined with hexanol, a middle-phase microemulsion is produced and coexists with excess water and oil phases at optimum mixing fraction of SE and hexanol. The bicontinuous structure of the microemulsion was confirmed by means of self-diffusion coefficient on NMR measurement.

A larger solubilization capability of oil is attained to a mixed mono- and poly-dodecanoate system than that of the middle-chain alcohol. It is probably due to the location of most of surfactant molecules at the micro-interface inside the microemulsion. In this system, instead of forming a three-phase region, a lamellar liquid crystal intrudes into multi-phase region since the surfactant layer is rather rigid as which was supported by the results of SAXS and ESR measurements. Further addition of a short-chain alcohol such as propanol to the mixed system leads to the flexible interface, as a consequence three-phase microemulsion with large solubilization is formed.     

Interaction between polymer and anionic/nonionic surfactants and its mechanism of enhanced oil recovery

Various experimental methods were used to investigate interaction between polymer and anionic/nonionic surfactants and mechanisms of enhanced oil recovery by anionic/nonionic surfactants in the present paper. The complex surfactant molecules are adsorbed in the mixed micelles or aggregates formed by the hydrophobic association of hydrophobic groups of polymers, making the surfactant molecules at oil-water interface reduce and the value of interfacial tension between oil and water increase. A dense spatial network structure is formed by the interaction between the mixed aggregates and hydrophobic groups of the polymer molecular chains, making the hydrodynamic volume of the aggregates and the viscosity of the polymer solution increase. Because of the formation of the mixed adsorption layer at oil and water interface by synergistic effect, ultra-low interfacial tension (～2.0?×?10^?3 mN/m) can be achieved between the novel surfactant system and the oil samples in this paper. Because of hydrophobic interaction, wettability alteration of oil-wet surface was induced by the adsorption of the surfactant system on the solid surface. Moreover, the studied surfactant system had a certain degree of spontaneous emulsification ability (D50?=?25.04?µm) and was well emulsified with crude oil after the mechanical oscillation (D50?=?4.27?µm).     

Phase behavior and self-organized structures of diglycerol monolaurate in different nonpolar organic solvents

Nonaqueous phase behavior and reverse micellar structures of diglycerol monolaurate (DGL) in different nonpolar organic solvents, such as n-decane, n-tetradecane, and n-hexadecane, have been studied over a wide range of compositions and temperatures. The equilibrium phases are identified by means of visual observation and small-angle X-ray scattering (SAXS). A solid phase present at lower temperature swells small amount of oils and transforms into a lamellar liquid crystalline structure at higher temperature. The melting temperature of the solid phase is virtually constant at all mixing ratios of the surfactant and oil. With the further increase of temperature, the liquid crystal transforms into an isotropic single-liquid phase near the surfactant axis, whereas there is a coexistence region of two isotropic phases near the solvent axis. The area of the two-liquid (II) phase region depends largely on the hydrocarbon chain length of the oils, the longer chain leading to the wider II area. Accordingly, the DGL surfactant is most miscible with decane, exhibiting a reduced miscibility with increasing solvent hydrocarbon chain length. Increasing temperature enhances the dissolution tendency of the surfactant in oil, where the two-liquid phase transforms into an isotropic single phase. SAXS analysis based on the GIFT technique is used to characterize the structure of the reverse micellar aggregates in the isotropic single-phase liquids. We have demonstrated that instead of changing polarity or a functional group of the solvent molecules, if we optimize the hydrophilic nature of the surfactant head group, the alkyl chain length of the solvent oils can serve as a tunable parameter of the micellar geometry. The hydrophilic surfactant DGL interestingly forms cylindrical micelles in nonpolar oils, decane, and tetradecane in the dilute region above the II phase region. The micellar size shows temperature dependence behavior, and the micellar length goes on increasing with decreasing temperature; eventually we found a signature of the onset of critical fluctuations in the deduced pair-distance distribution function near the phase separation line. The signature of the attractive interaction between the cylindrical reverse aggregates when a phase separation line is approached is likely to be a precursor of critical phenomenon. Doping with a trace of water results in a similar but more pronounced structural enhancement. The transfer free energy of diglycerol moiety from a hydrophilic environment to different hydrocarbon oils may account for these phenomena.     

表面活性剂亲水-亲油能力对动态界面张力的影响

当两个不互溶的液相接触时 ,如果其中一相或两相含有表面活性物质 ,就可能产生动态界面张力 .两相间的界面张力随时间连续变化 ,直到平衡为止 .在到达平衡的过程中 ,经常通过一个最低值 .酸 性油 /碱水体系也会出现类似现象 .England和 Berg[1]把动态界面张力解释为表面活性物质在界面上累积的结果 ,并观察到 1,5-戊二醇由白油向水 中传质时存在明显的吸附-脱附位垒 .Rubin和 Radke[2]首次给出了解释酸性原油与碱水溶液接触时产生动态界面张力的物理模型 ,他们提出在油水界面上存在一个表面活性物质的脱附位垒 ,原油中的酸性物质与氢氧化…