Atomic and electronic structure of group-IV adsorbates on the GaAs(0 0 1)-(1 × 2) surface

Ab initio calculations, based on pseudopotentials and density functional theory, have been performed to investigate the atomic and electronic structure of the group-IV adsorbates (C, Si, Ge, Sn, and Pb) on the GaAs(0 0 1)-(1 × 2) surface considered in two different models: (i) non-segregated Ga-IV-capped structure and (ii) segregated structure in which the group-IV atoms occupying the second layer while the As atom floats to the surface. The non-segregated structure is energetically more favorable than the segregated structure for Sn and Pb, whereas it is the other way around for C, Si, and Ge.     

Perpendicular magnetization in Fe/Ni bilayers on GaAs(0 0 1)

Following the concept of spin-injection into a semiconductor-based device, a ferromagnetic element (like a GMR multilayer structure) can be used as a spin filter. A high spin-polarization of the electrons can be realized by the preparation of a monocrystalline multilayer structure consisting of ultrathin films of a high magnetic polarization. In the case of ultrathin films, the manipulation of the easy-axis of magnetization is possible, by changing the anisotropy terms contributing to the effective anisotropy of the structure. We report on the structural and magnetic properties of Ni/Fe and Fe/Ni bilayers epitaxially grown on GaAs(0 0 1). By a proper choice of Fe and Ni sequences (Fe/Ni/GaAs) and their thickness (up to 3 ML of Fe on the top of Ni), the rotation of magnetization from the in-plane to the out-of-plane direction was achieved.     

Studies on scattering of fast H and He atoms from Fe films grown on Cu(0 0 1)

The structure of ultrathin epitaxial Fe films grown on Cu(0 0 1) at room temperature is investigated by grazing scattering of fast H and He atoms. By making use of ion beam triangulation, direct information on the atomic structure of the film and substrate surfaces are obtained. We discuss a new variant of this method based on the detection of the number of emitted electrons. The data is analyzed via computer simulations using classical mechanics which provides a quantitative analysis with respect to projectile trajectories.     

Interaction of atomic H and CO with Cu(1 1 0) and bimetallic Ni/Cu(1 1 0)

Co-adsorption of hydrogen and CO on Cu(1 1 0) and on a bimetallic Ni/Cu(1 1 0) surface was studied by thermal desorption spectroscopy. Hydrogen was exposed in atomic form as generated in a hot tungsten tube. The Ni/Cu surface alloy was prepared by physical vapor deposition of nickel. It turned out that extended exposure of atomic hydrogen leads not only to adsorption at surface and sub-surface sites, but also to a roughening of the Cu(1 1 0) surface, which results in a decrease of the desorption temperature for surface hydrogen. Exposure of a CO saturated Cu(1 1 0) surface to atomic H leads to a removal of the more strongly bonded on-top CO (α₁ peak) only, whereas the more weakly adsorbed CO molecules in the pseudo threefold hollow sites (α₂ peak) are hardly influenced. No reaction between CO and H could be observed. The modification of the Cu(1 1 0) surface with Ni has a strong influence on CO adsorption, leading to three new, distinct desorption peaks, but has little influence on hydrogen desorption. Co-adsorption of H and CO on the Ni/Cu(1 1 0) bimetallic surface leads to desorption of CO and H₂ in the same temperature regime, but again no reaction between the two species is observed.     

Density-functional study of the CO chemisorption on bimetallic Pd–Sn(1 1 0) surfaces

We study the ordered PdSn c(2 × 2), (2 × 1), and PdSn₂ (3 × 1) overlayers deposited on Pd(1 1 0) by using first-principles density-functional calculations. It appears that the two PdSn structures are almost degenerate in the energy. Pd–Sn surfaces we consider do not display the marked buckling with Sn atoms displaced towards vacuum that is common for Pt–Sn surfaces. Low-coverage CO chemisorption at these overlayers and on analogous surface structures on Pd₃Sn is considered. It is shown that inclusion of an empirical correction to the CO adsorption energy changes the stable adsorption site from the long-bridge to the top one in most cases. The adsorption energy decreases with the number of Sn atoms in the vicinity of the adsorption site, and this property correlates well with the position of the centre of gravity of the local Pd d-electron band, and also with the variation of the local density of d-electron states at the Fermi level. The centre-of-gravity value is used to assess the core-level shifts for Pd atoms in various geometries. Most of the calculated data compare rather well with the recent measurements on Pd–Sn overlayers at Pd(1 1 0) as well as with other data on related bimetallic systems.     

Boron and indium incorporation in GaP(0 0 1) surfaces by vapour deposition: Density-functional supercell calculations of the surface stability

Using surface supercells and the density-functional method, surface formation energies are calculated for probable GaP(0 0 1) reconstructions without and with indium or/and boron substitutions. Obtained surface stability diagrams provide surface compositions and surface structures in dependence on the growth conditions: indium atoms are built into the c(4 × 4) patterns under strongly P-rich conditions and into the β2(2 × 4) reconstruction under less P-rich conditions. Under In-rich and non-P-rich conditions, initial structures of metallic InGa phases are formed in the (2 × 4) mixed-dimer reconstruction. In the c(4 × 4) and (2 × 4) mixed-dimer patterns the full range of In:Ga content is accessible by variation of the In:Ga ratio in the gas phase. Boron can be built into the c(4 × 4) patterns of the GaP(0 0 1) surface in form of isolated atoms or nearest-neighbours under strongly P-rich and moderately to strongly B-rich conditions. The boron incorporation is strongly enhanced at the surface in respect to theoretical predictions for the bulk, what explains the larger content found experimentally. Assuming P-rich conditions, which are suitable for the growth of the ternary alloys, the obtained surface stability diagram for the quaternary (BInGa)P shows that nearly the full range of In:Ga content is accessible. However, the boron content in the alloy is restricted as found analogously for (BGa)P and is independent of the indium content. The expected increase of the boron content in presence of indium cannot be confirmed. Contrary to the analogous GaAs systems, boron atoms do not substitute phosphor atoms (antisite position) in GaP, (InGa)P, (BGa)P, and (BInGa)P.     

FeO(1 1 1) formation by exposure of Fe(1 1 0) to atomic and molecular oxygen

The growth, structure, and morphology of ultrathin iron oxide layers formed on a Fe(1 1 0) single crystal surface are investigated by Auger electron spectroscopy, low energy electron diffraction, and grazing ion scattering. For Fe oxidation by atomic instead of molecular oxygen, the gas exposure can be reduced by almost two orders of magnitude because surface sticking and dissociation are not limiting the growth process. A well-ordered FeO(1 1 1) film with low defect density is only obtained with atomic oxygen. Compared to the bulk, the FeO lattice is laterally compressed by about 5-6% resulting in an in-plane oxygen (Fe) nearest-neighbor distance of 2.87 Å. Independent of the preparation method, long-range structural order is poor if the oxide film thickness is increased to 3-5 layers. This is attributed to the relatively large lattice mismatch between FeO(1 1 1) and Fe(1 1 0).     

Tetra-σ bonding adsorption of pyridine on Si(1 0 0)-2 × 1

We studied adsorption of pyridine on Si(1 0 0) at room temperature using high resolution photoemission spectroscopy (PES) and near edge X-ray adsorption fine structure (NEXAFS) in the partial electron yield (PEY) mode. The Si 2p, C 1s, N 1s spectra of pyridine on Si(1 0 0) showed that pyridine is chemisorbed on Si(1 0 0)-2 × 1 through the formation of the tetra-σ-bonded structure with the N atom and three C atoms. NEXAFS was conducted to characterize the adsorption geometry of pyridine on Si(1 0 0). The π* orbital of CC bond showed a good angle dependence in C K-edge NEXAFS spectra, and we were able to estimate the adsorption angle between chemisorbed pyridine of CC bond and the Si(1 0 0) surface using an analytical solution of NEXAFS intensity. We find the coexistence of two different tight bridges with the adsorption angles 42 ± 2° and 45 ± 2° with almost equal abundance.     

Observation of charge transfer states of F4-TCNQ on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface

We have investigated the valence electronic states of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄-TCNQ) on the 2-methylpropene chemisorbed Si(1 0 0)(2 × 1) surface using valence photoelectron spectroscopy. Since the electron affinity of condensed F₄-TCNQ is 5.24 eV and the energy from the valence band maximum of the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface to the vacuum level is 4.1 eV, spontaneous charge transfer would be expected in the present system. At sub-monolayer coverage of F₄-TCNQ, characteristic peaks are observed at 1.1 and 2.5 eV below Fermi energy. The former peak is assigned to a singly occupied affinity level, and the latter is ascribed to a relaxed highest occupied molecular orbital of adsorbed F₄-TCNQ. The work function change is increased up to +1.3 eV as a function of F₄-TCNQ coverage. These results support the occurrence of charge transfer into F₄-TCNQ on the 2-methylpropene saturated Si(1 0 0)(2 × 1) surface.     

The surface stress of the (1 1 0) and (1 0 0) surfaces of rutile and the effect of water adsorbents

The surface stress on clean TiO₂ (1 1 0) and (1 0 0) surfaces, and those with four types of adsorbent - (i) molecularly adsorbed water, (ii) dissociatively adsorbed water, (iii) dissociatively adsorbed water at an oxygen vacancy, and (iv) adsorbed hydrogen - was investigated in the framework of density functional theory using a slab model. The calculations were intended to rationalize the effect of the artificially introduced stress that occurs in experimentally photoinduced hydrophilicity. Tensile stress was observed for a clean (1 1 0) surface, and a mixture of tensile and compressive stress for a clean (1 0 0) surface. The adsorbate-induced surface stresses were analyzed in terms of the sixfold coordinated character of the surface titanium atoms, hydrogen bonds between the adsorbents and the bridging oxygen atoms, and the change in electron density in the vicinity of the surface.     

Structure and magnetism of bcc(1 1 0)-like Fe films grown on Cu(0 0 1) via ion beam triangulation and spin-polarized electron capture

The structure and magnetism of thin epitaxial Fe layers grown on Cu(0 0 1) is investigated by grazing scattering of fast H and He atoms. Information on the atomic structure of the film and substrate surfaces is obtained by making use of ion beam triangulation with protons. The magnetic behavior is studied via the polarization of light emitted after capture of spin-polarized electrons into excited atomic terms during scattering of He atoms. For the formation of bcc(1 1 0)-like Fe films at higher coverages, we detect differences in structural and magnetic properties for room and low temperature growth. We suggest that the crystalline structure depends on the film morphology and that Cu impurities affect the magnetic properties.     

Epitaxial growth of ultra-thin NiO films on Cu(1 1 1)

The very first stages of the growth of NiO on Cu(1 1 1) is examined on a microscopic scale. The paper focuses on the morphological and structural characterization of nanostructures formed in the 0-1 Å thickness range. Ultra-thin NiO films, obtained through evaporation of a Ni rod under an oxygen atmosphere were grown at 550 K. In the early stages of the growth the oxide film morphology shows 10-30 nm large, monolayer high, islands with a partial incorporation of metallic Ni in the first Cu(1 1 1) surface plane. The first layer is formed by an epitaxial atomic layer exhibiting a STM contrast similar to the one observed on adsorbed oxygen on Cu(1 1 0). A NiO cluster nucleation and coalescence mechanism is proposed in order to explain the formation of the second NiO layer. A α-Ni₂O₃ hexagonal phase, or a structural distortion of the NiO(1 1 1)()R30° structure could both explain the complex LEED patterns.     

Density functional calculations for Ni adsorption on Al(1 1 0)

The adsorption of 0.25, 0.5 and 1 monolayer (ML) of the transition metal Ni on the metal substrate Al(1 1 0) was studied using first-principles calculations at the level of density functional theory. The metal–metal system was analyzed with the generalized gradient approximation. Four stable atomic configurations were considered, and the optimized geometries and adsorption energies of different Ni adsorption sites on the Al(1 1 0) surface at selected levels of coverage were calculated and compared. The four-fold hollow site was determined to be the most stable adsorption site with adsorption energy of 5.101 eV at 0.25 ML, 3.874 eV at 0.5 ML and 3.665 eV at 1 ML. The adsorption energies of the four sites slightly decreased as the Ni coverage increased. Work function analysis showed that when Ni is adsorbed on the Al(1 1 0) surface, the work function decreased as the coverage increased due to depolarization. The Mulliken population and density of states were calculated to determine the charge distribution of the adsorption site, confirming that a chemisorption interaction exists between the adsorbed Ni atom and Al(1 1 0) surface atoms.     

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Si(1 1 1)-7×7 films

Effect of oxygen exposure on the magnetic properties of ultrathin Co/Si(1 1 1)-7×7 films have been studied. In ultrahigh vacuum environment, Auger electron spectroscopy (AES) analysis shows that no oxygen adsorption occurs on Si(1 1 1)-7×7 surface and Co-Si compound interfaces. As the thickness of Co films increases above 5 monolayers (ML), pure cobalt islands form on the surface and the amount of oxygen on the surface layers increases with increasing the oxygen exposure time. From the results of slight chemical shift and depth profiling measurements, the oxygen is weakly adsorbed on the topmost layer of 15 ML Co/Si(1 1 1) films. The adsorbed oxygen influences the electronic density of states of Co and leads to the changes of the magnetic properties. The appearance of the O/Co interface could modify the stress anisotropy, as a result, the coercivity of ultrathin Co/Si(1 1 1) films are enhanced. As an example for 15 ML Co/Si(1 1 1), the coercivity increases from 140 to 360 Oe with 5000 Langmuir of oxygen exposure.     

Surface and subsurface oxide formation on Ni(1 0 0) and Ni(1 1 1)

The oxidation of Ni(1 0 0) and Ni(1 1 1) at elevated temperatures and large oxygen exposures, typical of the methods used in the preparation of NiO(1 0 0) films for surface studies, has been investigated by medium energy ion scattering (MEIS) using 100 keV H⁺ incident ions. Oxide film growth proceeds significantly faster on Ni(1 1 1) than on Ni(1 0 0), but on both surfaces oxide penetration occurs to depths significantly greater than 100 Å with total exposures of 1200 and 6000 L respectively. The metal/oxide interface is extremely rough, with metallic Ni extending to the surface, even for much thicker oxide films on Ni(1 1 1). On Ni(1 1 1), NiO growth occurs with the (1 0 0) face parallel to the Ni(1 1 1) surface and the close-packed 〈1 1 0〉 directions parallel. On Ni(1 0 0) the MEIS blocking curves cannot be reconciled with a single orientation of NiO(1 0 0) (with the 〈1 1 0〉 directions parallel) on the surface, but is consistent with the substantial orientational disorder (including tilt) previously identified by spot-profile analysis LEED.     

Ultrathin nickel oxide films grown on Ag(0 0 1): a study by XPS, LEIS and LEED intensity analysis

The structure of a nickel oxide film 2 ML thick has been investigated by LEED intensity analysis. The NiO film was prepared by evaporating Ni in presence of O₂ at a pressure in the 10⁻⁶ mbar range. The growth of the oxide film was followed by XPS, LEIS and LEED. In the early stages of deposition, the film shows a (2 × 1) superstructure in LEED. After deposition of 2 ML of NiO, a sharp (1 × 1) LEED pattern is observed. The intensity versus electron energy curves of the LEED spots were measured for this NiO(1 × 1) film and analysed by means of the tensor LEED method. A good level of agreement of the experimental LEED intensities with those calculated for a pseudomorphic NiO(0 0 1) film was obtained. We found that oxygen atoms at the oxide-substrate interface are on-top silver atoms. The interlayer distance in the oxide does not differ significantly from that in bulk NiO(0 0 1), within the accuracy of the analysis. An outward displacement (0.05 ± 0.05 Å) of oxygen atoms with respect to nickel atoms was found at the oxide film surface. The interlayer distance at the silver-nickel oxide interface is 2.43 ± 0.05 Å.     

Theoretical study of oxygen adsorption at the Fe(1 1 0) and (1 0 0) surfaces

Electronic, magnetic and structural properties of atomic oxygen adsorbed in on-surface and subsurface sites at the two most densely packed iron surfaces are investigated using density functional theory combined with a thermodynamics formalism. Oxygen coverages varying from a quarter to two monolayers (MLs) are considered. At a 1/4 ML coverage, the most stable on-surface adsorption sites are the twofold long bridge sites on the (1 1 0), and the fourfold-hollow sites on the (1 0 0) surface. The presence of on-surface oxygen atoms enhances the magnetic moments of the atoms of the two topmost Fe layers. Detailed results on the surface magnetic properties, due to O incorporation, are presented as well. Subsurface adsorption is found unfavored. The most stable subsurface O, in tetrahedral positions at the (1 0 0) and octahedral ones at the (1 1 0) surface, are characterized by substantially lower binding than that in the on-surface sites. Subsurface oxygen increases the interplanar distance between the uppermost Fe layers. The preadsorbed oxygen overlayer enhances binding of subsurface O atoms, particularly for tetrahedral sites beneath the (1 1 0) surface.     

Formation of a √3 × √3 surface on Si/Ge(1 1 1) studied by STM and LEED

We have performed a detailed study of the formation and the atomic structure of a √3 × √3 surface on Si/Ge(1 1 1) using both scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). Both experimental methods confirm the presence of a √3 × √3 periodicity but unlike the Sn/Ge(1 1 1) and the Sn/Si(1 1 1) surfaces, the Si/Ge(1 1 1) surface is not well ordered. There is no long range order on the surface and the √3 × √3 reconstruction is made up of double rows of silicon atoms separated by disordered areas composed of germanium atoms.     

Adsorption of methanol and methoxy on NiAl(1 1 0) and Ni3Al(1 1 1): A DFT study

The adsorption of methanol and methoxy on NiAl(1 1 0) and Ni₃Al(1 1 1) has been investigated using density functional theory (DFT). Optimised adsorption geometries and core level shifts are presented. On both surfaces we find that methanol binds to the Al on-top site via its oxygen atom and with the C–O axis tilted away from the surface normal. Methoxy also shows a preference for Al-dominated sites. On NiAl(1 1 0), we predict that methoxy adsorbs with its oxygen atom in the Al–Al bridge site, while it is determined to be adsorbed with its oxygen atom in a 2Ni + Al hollow site on Ni₃Al(1 1 1), closer to Al than Ni. Surface and adsorbate induced binding energy shifts in the Al 2p states are calculated and found to be in good agreement with experimental high resolution photoelectron spectroscopy results.     

Initial growth of platinum on oxygen-covered Ni(1 1 0) surfaces

The initial growth of Pt on the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) surfaces has been studied by coaxial impact collision ion scattering spectroscopy (CAICISS), low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). Prior to Pt deposition, the atomic structure of the near-surface regions of the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) structures were studied using CAICISS, finding changes to the interlayer spacings due to the adsorption of oxygen. Deposition of Pt on the Ni(1 1 0)-(3 × 1)-O surface led to a random substitutional alloy in the near-surface region at Pt coverages both below and in excess of 1 ML. In contrast, when the surface was treated with 1800 L of atomic oxygen in order to form a NiO(1 1 0) surface, a thin Pt layer was formed upon room temperature Pt deposition. XPS and LEED data are presented throughout to support the CAICISS observations.