Hydride ion transfer from ruthenium(II) complexes in water: kinetics and mechanism

Reactions of hydride complexes of ruthenium(II) with hydride acceptors have been examined for Ru(terpy)(bpy)H(+), Ru(terpy)(dmb)H(+), and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) in aqueous media at 25 °C (terpy = 2,2';6',2'-terpyridine, bpy = 2,2'-bipyridine, dmb = 4,4'-dimethyl-2,2'-bipyridine). The acceptors include CO(2), CO, CH(2)O, and H(3)O(+). CO reacts with Ru(terpy)(dmb)H(+) with a rate constant of 1.2 (0.2) × 10(1) M(-1) s(-1), but for Ru(η(6)-C(6)Me(6))(bpy)(H)(+), the reaction was very slow, k ≤ 0.1 M(-1) s(-1). Ru(terpy)(bpy)H(+) and Ru(η(6)-C(6)Me(6))(bpy)(H)(+) react with CH(2)O with rate constants of (6 ± 4) × 10(6) and 1.1 × 10(3) M(-1) s(-1), respectively. The reaction of Ru(η(6)-C(6)Me(6))(bpy)(H)(+) with acid exhibits straightforward, second-order kinetics, with the rate proportional to [Ru(η(6)-C(6)Me(6))(bpy)(H)(+)] and [H(3)O(+)] and k = 2.2 × 10(1) M(-1) s(-1) (μ = 0.1 M, Na(2)SO(4) medium). However, for the case of Ru(terpy)(bpy)H(+), the protonation step is very rapid, and only the formation of the product Ru(terpy)(bpy)(H(2)O)(2+) (presumably via a dihydrogen or dihydride complex) is observed with a k(obs) of ca. 4 s(-1). The hydricities of HCO(2)(-), HCO(-), and H(3)CO(-) in water are estimated as +1.48, -0.76, and +1.57 eV/molecule (+34, -17.5, +36 kcal/mol), respectively. Theoretical studies of the reactions with CO(2) reveal a "product-like" transition state with short C-H and long M-H distances. (Reactant) Ru-H stretched 0.68 ?; (product) C-H stretched only 0.04 ?. The role of water solvent was explored by including one, two, or three water molecules in the calculation.     

Scope, mechanism and diene inhibition of isomerization of allylic alcohols to saturated ketones catalyzed by ruthenium(II)-cyclopentadienyl complexes

The isomerization of 3-buten-2-ol to butanone catalyzed by Ru(II)Cp-complexes (Cp = η⁵-cyclopentadienyl) with phosphine and amine ligands is described. The reaction catalyzed by [RuCp(MeCN)₃](PF₆) and two equivalents of triphenylphospine is first order in substrate with a k_ini of 0.43 h⁻¹ and an initial TOF of 13,000 h⁻¹. The catalyst precursor complex [RuClCp(dppb)] (dppb = bis(diphenylphosphino)butane) has been characterized by X-ray diffraction. This compound features a seven-membered ring incorporating the ruthenium centre and the dppb ligand.Combination of two equivalents of primary, secondary or tertiary amines and [RuCp(MeCN)₃](PF₆) results in active catalyst precursors. Within each group, increasing the bulk of the ligand gives lower isomerization rates. The combined effects of optimal pK_a, nucleophilicity and steric bulk make RuCp-complexes with secondary amines the most active precursors. With di-n-butylamine, 745 turnovers can be reached after 1 h. ³¹P NMR spectra indicate that the resting state in the catalytic cycle is a complex in which 3-buten-2-ol is η²-coordinated through the alkene moiety. This implies that coordination of the oxygen moiety and concomitant β-hydrogen abstraction is the rate-limiting step. A counterintuitive result is that allylic alcohols bind stronger to RuCp complexes with phosphine ligands than dienes. Inhibition of the catalyst appears to be a result of interaction of the diene with a ruthenium-allyl alcohol complex, which is sufficiently strong to prevent coordination of the oxygen moiety of the allylic alcohol. This hinders orientation of the allylic alcohol substrate in a suitable way to undergo β-hydrogen abstraction, thereby blocking isomerization catalysis.     

Reduction of ketones with secondary alcohols,catalyzed by triphenylphosphine complexes of ruthenium and rhodium

Russian Chemical Bulletin -     

The formation of dinuclear trichloro-bridged and mononuclear ruthenium complexes from the reactions of dichlorotris(p-tolylphosphine)ruthenium(II) with diazabutadiene ligands

Transition Metal Chemistry - Ru(II) complexes with diazabutadiene (R-DAB) ligands have been prepared. The reaction of RuCl3·nH2O with P(p-tolyl)3 gave a [RuCl2{P(p-tolyl)3}] precursor, whose...     

Binuclear ruthenium(II) pyridazine complex catalyzed transfer hydrogenation of ketones

A convenient and general method of synthesis of binuclear ruthenium(II) pyridazine complex was reported. The synthesized complex was characterized by analytical and spectral methods. The structure of the complex was confirmed by X-ray diffraction technique and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversions in the presence of isopropanol/KOH at 82 °C. The effect of solvents, bases, and different catalyst/substrate ratio for the reaction was also investigated.     

Polymeric cofactors which accelerate homogeneous rhodium(I) and ruthenium(II) catalyzed hydrogenations of alkenes

Polymeric reagents prepared by exchanging silver(I) for H⁺ on a macroreticular polystyrene sulfonate ion exchange resin are shown to be capable of selectively absorbing triphenylphosphine from solutions of triphenylphosphine complexes of rhodium(I) and ruthenium(II). Absorption of triphenylphosphine during alkene hydrogenations catalyzed by RhCl(PPh₃)₃, RuCl₂(PPh₃)₃ and RuHCl(PPh₃)₃ led to increased hydrogenation rates in hydrogenation of 1-hexene and other alkenes. Addition of this silver(I) polystyrene sulfonate to alkene hydrogenations catalyzed by HRh(CO) (PPh₃)₃, RuH₂(PPh₃)₃ and RuH(OCOCH₃) (PPh₃)₃ also led to modest rate accelerations. Catalyst activations seen in these alkene hydrogenations were shown to be due in some cases to triphenylphosphine absorption. In other cases, HCl or HCl plus triphenylphosphine absorption was responsible for the formation of a more active catalyst solution.     

Oxidation of primary alcohols to aldehydes catalyzed by ruthenium compounds

The RuCl₃ and RuO₂·nH₂O catalyzed oxidation of alkanes, aromatic fatty acids, alcohols, citronellol, and hydroxycitronellol by NaOCl was studied in the diphase system CCl₄-aqueous NaOCl at pH 13–13.5. At 60–65°C, using 1–2 mole % of catalyst and a 1.5-fold molar excess of NaOCl, primary alkanols (hexanol-1, 2-ethylhexanol-1, decanol-1, hexadecanol-1) benzyl and 3-phenyl-propyl alcohols, and hydroxycitronellol are converted to the corresponding aldehydes with a selectivity of 70–90% and a yield of over 75%.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 1, pp. 115–121, January, 1991.     

Coordination,oligomerisation and transfer hydrogenation of acetylenes by some ruthenium and osmium carboxylates: Crystal and molecular structures of bis(trifluoroacetato)carbonyl-(methanol) bis(triphenylphosphine)ruthenium(II) and (1,4-diphenylbut-1-en-3-yn-2-yl)trifluoroacetato-(carbonyl) bis(triphenylphosphine)ruthenium(II)

The hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] (M = Ru or Os) react with disubstituted acetylenes PhCCPh and PhCCMe to afford vinylic products [M{C(Ph)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] and [M{C(Ph)CHMe}(O₂CCF₃)(CO) (PPh₃)₂]/[M{C(Me)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] respectively. Acidolysis of these products with trifluoroacetic acid in cold ethanol liberates cis-stilbene and cis-PhHCCHMe respectively thus establishing the cis-stereochemistry of the vinylic ligands. The complexes [M(O₂CCF₃)₂(CO)(PPh₃)₂] formed during the acidolysis step undergo facile alcoholysis followed by β-elimination of aldehyde to regenerate the parent hydrides [MH(O₂CCF₃)(CO)(PPh₃)₂] and thereby complete a catalytic cycle for the transfer hydrogenation of acetylenes. The molecular structure of the methanol-adduct intermediate, [Ru(O₂CCF₃)₂(MeOH)(CO)(PPh₃)₂] has been determined by X-ray methods and shows that the coordinated methanol is involved in H-bonding with the monodentate trifluoroacetate ligand [MEO-H---OC(O)CF₃; O...O = 2.54 Å]. The hydrides [MH(O₂CCF₃)(CO) (PPh₃)₂]react with 1,4-diphenylbutadiyne to afford the complexes [M{C(CCPh)CHPh} (O₂CCF₃)(CO)(PPh₃)₂]. The ruthenium product, which has also been obtained by treatment of [RuH(O₂CCF₃)(CO)(PPh₃)₂] with phenylacetylene, has been shown by X-ray diffraction methods to contain a 1,4-diphenylbut-1-en-3-yn-2-yl ligand. The osmium complexes [Os(O₂CCF₃)₂(CO)(PPh₃)₂], [OsH(O₂CCF₃)(CO)(PPh₃)₂] and [Os{C(CCPh)CHPh}(O₂CCF₃)(CO)(PPh₃)₂] all serve as catalysts for the oligomerisation of phenylacetylene. Acetylene reacts with [Ru(O₂CCF₃)₂(CO)(PPh₃)₂] in ethanol to afford the vinyl complex [Ru(CHCH₂)(O₂CCF₃)(CO)(PPh₃)₂].     

Mixed complexes of ruthenium(III) and ruthenium(II) with triphenylphosphine or triphenylarsine and other ligands

The reactions of [RuCl₃(AsPh₃)₃] with ligands containing nitrogen (ammonia, hydrazines, amine and thiocyanate) and oxygen (carboxylates) and the reactions of β-diketones (acetylacetone, dibenzoylmethane and benzoylacetone) with [RuCl₂(PPh₃)₂]_n and [RuCl₂(AsPh₃)₂]₂ have been studied. Apart from this, a new Ru(III) complex, [RuBr₃(AsPh₃)₃] has also been synthesized. The compounds obtained have been characterised by analyses, conductivity and magnetic measurements, molecular weight and spectral studies (IR and visible). An equilibrium between hexacoordinated and pentacoordinated species is suggested on the basis of electronic spectral studies.     

The decomposition kinetics of hydrogen peroxide catalyzed by diethylenetriaminepentaacetatoiron(III) complex

The rate of reaction of (Fe(DTPA)) with H₂O₂ was investigated at various temperatures. The observed rate law is given by the expression. The rate constants and the related thermodynamic parameters are calculated. Substitution controlled mechanisms are suggested to account for the formation of the violet peroxy intermediate. The results are compared with previously data for Fe EDTA complex.     

Asymmetric transfer hydrogenation of ketones catalyzed by ruthenium(II) complexes bearing a chiral phosphinoferrocenyloxazoline ligand

The catalytic activity in asymmetric transfer hydrogenation of ketones using octahedral and half-sandwich (η⁵-indenyl and η⁶-arene) ruthenium(II) complexes containing the chiral ligand (4S)-2-[(S_p)-2-(diphenylphosphino)ferrocenyl]-4-(isopropyl)oxazoline (FcPN) has been explored. Catalytic studies with complex fac-[RuCl₂{η²(P,N)-FcPN}(PMe₃)₂] (1) show excellent TOF values (9600 h⁻¹). Experiments in the presence of free FcPN, which lead to an increase in conversion rates and ee values when the catalyst is complex [Ru(η⁵-C₉H₇){κ²(P,N)-FcPN}(PPh₃)][PF₆] (4) have been carried out. The characterization of the new complexes mer-trans-[RuCl₂{P(OMe)₃}₂{κ²(P,N)-FcPN}] and of the water-soluble complexes fac- and mer-trans-[RuCl₂(PTA)₂{κ²(P,N)-FcPN}] is also reported.     

Quinones synthesis via hydrogen peroxide oxidation of dihydroxy arenes catalyzed by homogeneous and macroporous-polymer-supported ruthenium catalysts

Ruthenium(II)/dimethyl phenyloxazoline (Ru(II)/dm-Pheox) complex 2a and its macroporous-polymeric-catalyst 4 were found to be very rapid and efficient catalysts in the hydrogen peroxide oxidation of 1,2- and 1,4-dihydroxy arenes. Most of the quinone products were delivered in 99% yield. The polymeric-catalyst 4 could be reused at least five times.