Iron carbonyl complexes of 2,3,5,6-tetrakis(methylene)-7-oxabicyclo[2.2.1]heptane. Crystal and molecular structure of (C10H10O)Fe(CO)3 and (C9H10CO)Fe2(CO)6

The reaction of 2,3,5,6-tetrakis(methylene)-7-oxabicyclo[2.2.1]heptane (I) with iron carbonyls in various solvents yields the (η⁴-1,3-diene)Fe(CO)₃ isomers (II: exo; III: endo) and the bimetallic isomers bis[(η⁴-1,3-diene)Fe(CO)₃] (IV: bis(exo); V: endo,exo). In weakly coordinating solvents, a parallel rearrangement of I occurs through CO bond cleavage of the allylic ether by Fe₂(CO)₉ yielding an unsaturated ketone (VI) bonded to two Fe(CO)₃ groups through a trimethylenemethane and a 1,3-diene system, respectively. The geometries of III and VI have been ascertained by X-ray crystal structure determinations.     

Regioselective addition of protic acids to tricarbonyliron complexes of 2,3,5,6-tetrakis(methylene)-7-oxabicyclo[2.2.1]heptane. Crystal structure of (C10H10O)Fe2(CO)6

The main product of the thermal reaction between the title oxatetraene (I) and Fe₂(CO)₉ in ether/pentane is the bimetallic complex (C₁₀H₁₀O)Fe₂(CO)₆-diexo (II), which has C_2υ symmetry both in the solid state (X-ray analysis) and in solution. Whereas the protonation of the free ligand leads usually to polymerisation, the addition of a protic acid such as CF₃CO₂H to II proceeds cleanly at 0°C giving first a (η 3-allyl)Fe(CO)₃O₂CCF₃ complex (III). The intermediate III adds a second equivalent of acid in a slower step (k₂/k₁ = 0.1, CF₃CO₂D/CHCl₃, 0°C) giving the trans-bis(η³-allyl) isomer IV with high regioselectivity. The addition of CF₃CO₂D yields the corresponding deuteriomethylallyliron tricarbonyl trifluoroacetates III′ and IV′. No further deuterium incorporation is observed at 0°C, thus confirming the kinetic control of the regioselective double addition of protic acid to II.     

Bis(dimethylphosphino)methane (dmpm) complexes of iron,molybdenum and chromium: X-ray crystal structures of FeCr(CO)6(μ-dmpm)2 and Fe2(CO)4(μ-CO)(μ-dmpm)2

The photolysis of Fe(η¹-dmpm)(dmpm)₂ [dmpm = bis(dimethylphosphino) methane) with Cr(CO)₆ and Fe(CO)₅ under UV irradiation produces FeCr(CO)₆(μ-dmpm)₂, Fe₂(CO)₆(μ-CO)(μ-dmpm) and Fe₂(CO)₄(μ-CO)(μ-dmpm)₂ respectively. The interaction of Mo(CO)₃(MeCN)₃ and (C₇H₈)Cr(CO)₃ with dmpm produces Mo₂(CO)₆(μ-dmpm)₃ and cis-Cr(CO)₂(dmpm)₂ respectively. The X-ray crystal structure of FeCr(CO)₆(μ-dmpm)₂ shows the molecule to contain a trigonal bipyramidal Fe(CO)₃P₂ unit plus a square pyramidal Cr(CO)₃P₂ unit held closely together by the methylene bridges of the dmpm ligands with steric compression between the CO groups causing distortions from ideal geometry in each case. The Cr … Fe distance is 3.111(6) Å and there seems to be little structural evidence of any form of interaction between the 16e Cr(O) centre and the Fe-containing unit. The structure of Fe₂(CO)₄(μ-CO)(μ-dmpm)₂ contains a symmetrical μ₂-carbonyl and a single bond between the two symmetry related (m) iron atoms. The Fe … Fe distance is 2.719(4) Å.     

Allyldifluorophosphite-metal chemistry: Ru complexes of F2POC3H5 and the crystal structure of (Ph3P)2(F2POC3H5)Ru(CO)(Cl)H

With several chloro ruthenium phosphine complexes, allyldifluorophosphite, F₂POC₃H₅, displaces triphenylphosphine to form new compounds in which it acts as a phosphorus donor ligand. The new complexes [PPh₃]₂[F₂POC₃H₅]Ru[CO][Cl][H], I, and [(PPh₃)₂(F₂POC₃H₅)₂RuCl₂]_nII, hav characterized by chemical, spectroscopic, and, in the case of I, crystallographic means. This behaviour of F₂POC₃H₅ contrasts to its reactions with several platinum and palladium chloro complexes where it undergoes Arbuzov-type rearrangements.     

Photoinduced synthesis of the new organoseleno manganese cluster [Mn(CO)3SeC6H5]4

The synthesis of the compounds [Mn(CO)₃XC₆H₅]₄ (X = Se, S) by UV irradiation of a mixture of Mn₂(CO)₁₀ with Se₂(C₆H₅)₂ or S₂(C₆H₅)₂ is described.     

Conformational analysis in diastereoisomer equilibria of square-pyramidal [C5H5(CO)2Mo pyridine-2-imine]PF6 complexes

Synthesis and characterization of sonic new square-pyramidal pyridine-2-imine complexes [C₅,H₅,(CO)₂,MoNC₅,H₄,CX=NCH(R₁)(R₂)]PF₆ with X = CH₃, C₆H₅ and chiral amine, 1-phenyl-isobutylamine and amino acid methyl ester H₂NCH(COOCH₃)(R) with (R) = (CH₂C₆H₅) and (C₂H₅) have been reported. In combination with Mo chirality (R) and (S), mixtures of two diastereoisomeric pairs of enantiomers with racemic amine and amino acids were obtained which were separated by fractional cystallization. The diastereoisomers differ in the chemical shift of most of their ¹H NMR signals and interconvert on heating in acetone-d₆ at 80°C for 80 hr and 40°C for 200 hr. On the basis of three conformational determining effects (i) C-H or C-alkyl of the asymmetric centre eclipses the ligand plane, (ii) MC₅H₅/C₆H₅ attraction and (iii) MC₅H₅/alkyl repulsion in order of decreasing significance, the chemical shifts of the C₅H₅ signals, their differences as well as the diastereoisomer ratio at equilibrium for all the complexes has been rationalised.     

Organo-imido alkoxides of tungsten(VI). The crystal and molecular structures of [W(NPh)(μ-OMe)(OMe)3]2 and [W(NPh)(OCMe3)3Cl(NH2CMe3)]

Reaction of phenylimido tungsten tetrachloride with MeOH and t-butylamine gave the dimeric complexes [W(NPh)(μ-OMe)(OMe)₃]₂ and [W(NPh)(μ-OMe)(OMe)₂Cl]₂. With ethanol [W(NPh)(μ-OEt)(OEt)₂Cl]₂ was formed whereas isopropyl and neopentyl alcohols gave the monomeric complexes [W(NPh)(OR)₄(NH₂CMe₃)](R = CHMe₂, CH₂CMe₃); t-butanol gave [W(NPh)(OCMe₃)3Cl(NH₂CMe₃)] which could not be converted to [W(NPh) (OCMe₃)₄]. Further reaction of [W(NPh)(μ-OMe)(OMe)₃]₂ with o-HOC₆H₄CH = NC₆H₃Me₂(salim-H) gave the salicylaldimine complex [W(NPh)(OMC)₃(salim)]. The products were characterised by analytical data, IR, ¹H NMR, ¹³C NMR and mass spectroscopy. The crystal and molecular structures of the title complexes have been determined from single crystal X-ray diffractometer data. Crystals of [W(NPh)(μ-OMe)(OMe)₃]₂are triclinic with a = 8.473(7), b = 10.776(5), c = 7.683(Å, α = 102.26(3), β = 102.68(4), γ = 71.13(6)°, space group P$\text{1}$ Crystals of 3) [W(NPh)(OCMe₃)₃Cl(NH₂CMe₃) are monoclinic with a = 9.341(2), b = 29.608(7), c = 10.257(2) Å, β = 106.28(2)°, space group, P2₁/c. Both structures were solved by Patterson and Fourier methods and refined to R = 0.075 for the 1022 observed data of [W(NPh) (μ-OMe)(OMe)₃]₂ and to R = 0.074. For the 2033 observed data of [W(NPh)(OCMe₃)₃Cl(NH₂CMe₃). The former molecule is shown to be a dimer, the two halves of the molecule being related by a centre of symmetry. Both W atoms adopt a distorted octahedral coordination geometry and they are linked by two methoxy bridges. Trans to one of the bridging donors is the phenyl imido group with a WN bond length of 1.61(4) Å; the remaining coordination sites are filled with methoxy groups. The structure of W(NPh)(OCMe₃)₃ Cl(NH₂CMe₃) is monomeric with the phenylimido group trans to the NH₂CMe₃ ligand in a distorted octahedral coordination geometry. Remaining sites are filled with the chloride and 3 OCMe₃ ligands. The WN (imido) bond length is 1.71(2) Å, whilst WN(amine) is 2.40(2) Å     

Further studies on organonickel compounds: the synthesis of some new alkyl-, acyl- and cyclopentadienyl-derivatives and the crystal structure of trans-[Ni(CH2SiMe3)2(PMe3)2]

The complex [NiCl₂(PMe₃)₂] reacts with one equivalent of mg(CH₂CMe₃)Cl to yield the monoalkyl derivative trans-[Ni(CH₂CMe₃)Cl(PMe₃)₂], which can be carbonylated at room temperature and pressure to afford the acyl [Ni(COCH₂CMe₃)Cl(PMe₃)₂]. Other related alkyl and acyl complexes of composition [Ni(R)(NCS)(PMe₃)₂] (R = CH₂CMe₃, COCH₂CMe₃) and [Ni(R)(η-C₅H₅)L] (L = PMe₃, R = CH₂CMe₃, COCH₂CMe₃; L = PPh₃, R = CH₂CMe₂Ph) have been similarly prepared. Dialkyl derivatives [NiR₂(dmpe)] (R = CH₂SiMe₃, CH₂CMe₂Ph; dmpe = 1,2-bis(dimethylphosphine)ethane, Me₂PCH₂ CH₂PMe₂) have been obtained by phosphine replacement of the labile pyridine and NNN′N′-tetramethylethylenediamine ligands in the corresponding [Ni(CH₂SiMe₃)₂(py)₂] and [Ni(CH₂CMe₂Ph)₂(tmen)] complexes. A single-crystal X-ray determination carried out on the previously reported trimethylphosphine derivative [Ni(CH₂SiMe₃)₂(PMe₃)₂] shows the complex belongs to the orthorhombic space group Pbcn, with a = 14.345(4), b = 12.656(3), c = 12.815(3) Å, Z = 4 and R 0.077 for 535 independent observed reflections. The phosphine ligands occupy mutually trans positions P-Ni-P 146.9(3)° in a distorted square-planar arrangement.     

Synthese et etude des complexes [C5H4(CH2)3C5H4]Ti(C5H5)2 presentant un pont entre deux ligands cyclopentadienyles

The complex (di-η⁵-C₅H₄CH₂CH₂CH₂C₅H₄)Ti(η¹-C₅H₅)₂ (I) can be obtained unambiguously starting from the corresponding bridged titanocene dichloride. Attempts to synthesize the isomeric compounds (η⁵-C₅H₅)₂ Ti(di-η¹-C₅H₄-CH₂CH₂CH₂C₅H₄) (I′) by the action of a convenient bridged dianion on (C₅H₅)₂ TiCl₂ afford several compounds, one of them is the complex I. The possibility of interconversion of these complexes by a fluctional process is discussed.     

The molecular structure of benzoylmethylidynetricobalt nonacarbonyl,C6H5C(O)CCo3(CO)9

The molecular structure of benzoylmethylidynetricobalt nonacarbonyl, C₆H₅C(O)CCo₃(CO)₉, has been determined by single crystal X-ray crystallography. The sample crystallized from heptane forms as monoclinic prisms of spae group P2₁/c, with a = 8.836(2), b = 14.097(10), c = 16.514(3), β = 103.37(6) and z = 2. The final R value was 0.053. The structure is regular and normal but does not aid in explaining the interesting properties of this cluster.     

Vibrational and luminescence spectra of a new binuclear uranyl complex [(C2H5)4N]2[UO2F(NO3)2]2

The preparation, vibrational and luminescence spectra of the title compound are described. The complex has bidentate nitrate groups and bridging fluoride ions. The spectra are assigned in detail and interpreted as showing couplings between the uranyl antisymmetric stretching modes and between the nitrate modes within the dimer, the coupling energy being 17 cm^? in the former case. There is no clear evidence for electronic coupling involving the uranyl groups.     

Die kristall- und molekülstruktur von Fe3Te2(CO)9

The crystal and molecular structure of Fe₃Te₂(CO)₉ has been determined by X-ray diffraction analysis. The compound crystallizes in the triclinic space group P$\text{1}$ with a 952.5(4), b 1314.3(8), c 694.7(2) pm, α 95.27(4), β 112.78(3), γ 81.44(4)° and Z = 2 (R = 0.036, using 2079 reflections).     

On the character of molecular weight distribution of polyethylene produced in the presence of the homogeneous catalytic system (C5H5)2TiCl2Al(C2H5)2Cl

Experimental results obtained when studying the kinetics of ethylene polymerization in toluene, as well as data on fractionating polyethylene, are analysed and compared with the results of theoretical consideration of molecular weight distribution on the basis of the proposed kinetic scheme.The constants of the reactions of propagation, initiation, transfer and termination of polymer chains are evaluated and compared with literature data.     

Syntheses of some mixed AuOs and PtOs clusters and the X-ray structure of [Os4H2(CO)12(AuPPh3)2]

Some reactions of [Os₄H₃(CO)₁₂AuPR₃] (R = Et, Ph) resulting in the formation of [Os₄H₂(CO)₁₂(AuPR₃)₂] are presented. A single-crystal X-ray structure of [Os₄H₂(CO)₁₂(AuPPh₃)₂] is reported and reveals a novel Ph₃PAuAuPPh₃ unit asymmetrically bridging one edge of an Os₄ tetrahedron, the first example of a mixed gold-metal carbonyl cluster with an AuAu bond.     

The synthesis and decarbonylation of (η5-C5H5)Mo(Co)2(COCH3)E(C6H5)3, where E is arsenic or antimony

The synthesis of the title compounds by reaction of (η⁵-C₅H₅)Mo(CO)₃CH₃ with excess As(C₆H₅)₃ or Sb(C₆H₅)₃ in CH₃CN is described. Thermal decarbonylation results in the preferential ejection of As(C₆H₅)₃ or Sb(C₆H₅)₃ from the new acetyl complexes, which accounts for the failure of previous attempts to synthesise the acetyl complexes. Photolytic decarbonylations lead to new-alkyl complexes (η⁵-C₅H₅)Mo(CO)₂(CH₃)E(C₆H₅)₃. IR and NMR data for the new complexes are tabulated.     

Cationic di-iron complexes {[η-C5Fe(CO)2]2[μ-(CnH2n1)]}+

The reactions of the complexes [CpFe(CO)₂]₂[μ-(CH₂)_n with Ph₃CPF₆ yield cationic di-iron complexes of the type {[CpFe(C     

Synthesis of heterometallic cluster compounds from Fe3(μ3-Te)2(CO)9 and comparisons with analogous sulfide clusters

Fe₃Te₂(CO)₉ is shown to be a useful precursor to a variety of heterometallic carbonyl clusters in reactions which appear to proceed via the intermediacy of Fe₂(Te₂)(CO)₆. Fe₃Te₂(CO)₉ decomposed in polar solvents to give Fe₂(Te₂)(CO)₆ which could be dimerized to Fe₄Te₄(CO)₁₂. Fe₃Te₂(CO)₉ reacted with C₅H₅Co(CO)₂ and Pt(C₂H₄)(PPh₃)₂ to give good yields of (C₅H₅CO)Fe₂Te₂(CO)₇ and Fe₂PtTe₂(CO)₆(PPh₃)₂, respectively. (C₅H₅Co)Fe₂Te₂(CO)₇ underwent reversible decarbonylation to give a mixture of two isomers of (C₅H₅Co)Fe₂Te₂(CO)₆ as established by ¹²⁵Te NMR spectroscopy. Upon reaction with Co₂(CO)₈, Fe₃Te₂(CO)₉ gave Co₂FeTe(CO)₉ or Co₄Te₂(CO)₁₁ depending on the reaction conditions. Co₄Te₂(CO)₁₁, like Fe₃Te₂(CO)₁₀ and (C₅H₅Co)Fe₂Te₂(CO)₇, can be reversibly decarbonylated. The assembly of Co₂FeTe(CO)₉ may be mechanistically related to the conversion of Fe₂(S₂)(CO)₆ to FeCo₂S(CO)₉ which was found to proceed via Co₂Fe₂S₂(CO)₁₁. Alternatively, Co₂Fe₂S₂(CO)₁₁ reacted photochemically with [C₅H₅Mo(CO)₃]₂ to give the known, chiral cluster (C₅H₅Mo)CoFeS(CO)₈. While Fe₂(Te₂)(CO)₆ thermally dimerized to Fe₄Te₄(CO)₁₂, Fe₂(S₂)(CO)₆ gave the analogous dimer only upon photolysis. In contrast to the stability of (C₅H₅CO)Fe₂Te₂(CO)₇, the reaction of C₅H₅Co(CO)₂ with Fe₂(S₂)(CO)₆ gave only (C₅H₅CO)Fe₂S₂(CO)₆ which is proposed to be structurally related to Fe₃S₂(CO)₉ and not (C₅H₅Co)₃S₂ or Fe₂PtS₂(CO)₆(PPh₃)₂.     

Three-coordinate RhX[P(C6H11)3]2, their reactions with N2 and O2, and the trans-influence in RhX[P(C6H11)3]2L (X = anionic,L = neutral ligand)

Three-coordinate RhX(PCy₃)₂ complexes (X = F, Cl, Br, I; Cy = cyclohexyl) have been prepared from rhodium(I) cyclooctene compounds. RhCl(PCy₃)₂ is in equilibrium with its dimer. The complexes RhX(PCy₃)₂ (X = Cl, Br, I) form the adducts RhX(PCy₃)₂(N₂) with dinitrogen, the times for N₂-fixation being 4 days, 3 hours and 15 minutes respectively. The three-coordinate complexes form four-coordinate dioxygen adducts RhX(PCy₃)₂(O₂) which have unusually high ν(OO) at about 990 cm^?1. This high frequency is attributed to the four-coordination, which is exceptional for dioxygen complexes. From RhF(PCy₃)₂ carbonyl, ethene, and diphenylacetylene complexes RhX(PCy₃)₂L (X = F, Cl, Br, I, N₃, NCO, NCS; L = CO, C₂H₄, C₂Ph₂) (X = CN, NO₃, acetate; L = CO) have been prepared. The trans-influence of the anionic ligands on the infrared frequencies of the neutral ligands is discussed in terms of the different π-bonding properties of the X- and L-ligands.     

Massenspektrometrische-, dta- und tg-untersuchungen an eisencarbonylchalkogeniden Fe2(CO)6X2 (X  S,Se) und Fe3(CO)9X′2 (X′  S,Se, Te)

Mass spectra of Fe₃(CO)₉X₂ (X  S, Se, Te) and Fe₂(CO)₆X′₂ (X′  S, Se) are recorded and their fragmentation pattern given. The thermal decarbonylation has been studied using DTA/TG methods in the temperature range 25–600°C. The results are compared with those obtained from mass-spectroscopic studies. X-ray and magnetic measurements have been carried out on the residues obtained in the decarbonylation process.     

Direct synthesis and NMR spectra of [(C6H5)2PCH2]2CuB5H8: Comments on the solution structure of 2,3-μ-metallopentaboranes

The species [(C₆H₅)₂PCH₂]₂CuB₅H₈ has been prepared directly from [(C₆H₅)₂PCH₂]₂CuI and K[B₅H₈]. NMR spectra unequivocally indicate that the species has a static structure in solution and an argument is presented that all 2,3-,μ-metallopentaboranes have similarly static solution structures.