Combined column–mobile phase mixture statistical design optimization of high-performance liquid chromatographic analysis of multicomponent systems

A statistical approach for the simultaneous optimization of the mobile and stationary phases used in reversed-phase liquid chromatography is presented. Mixture designs using aqueous mixtures of acetonitrile (ACN), methanol (MeOH) and tetrahydrofuran (THF) organic modifiers were performed simultaneously with column type optimization, according to a split-plot design, to achieve the best separation of compounds in two sample sets: one containing 10 neutral compounds with similar retention factors and another containing 11 pesticides. Combined models were obtained by multiplying a linear model for column type, C8 or C18, by quadratic or special cubic mixture models. Instead of using an objective response function, combined models were built for elementary chromatographic criteria (retention factors, resolution and relative retention) of each solute or pair of solutes and, after their validation, the global separation was accomplished by means of Derringer's desirability functions. For neutral compounds a 37:12:8:43 (v/v/v/v) percentage mixture of ACN:MeOH:THF:H₂O with the C18 column and for pesticides a 15:15:70 (v/v/v) ACN:THF:H₂O mixture with the C8 column provide excellent resolution of all peaks.     

高效液相色谱梯度洗脱中弱溶剂的在线净化

利用一个在线净化预柱减少了高压梯度洗脱中由于试剂纯度不够造成的基线噪音。预柱的位置在溶剂泵Ａ和流动相混合器之间,由一个六通阀来控制。在线净化结果良好,有效地除去了空白梯度色谱图中的杂质峰,提高了梯度洗脱的分离重现性。该方法对开展梯度洗脱有实用价值。     

用铜（Ⅱ）—L—精氨酸配体交换薄层色谱拆分氨基酸对映体

报道了一种新的配体交换薄层色谱拆分氨基酸对映体的方法。以醋酸铜－Ｌ－精氨酸的络合物为配体交换剂，用浸渍的方法吸附在硅胶薄层板上，制成配体交换薄层，用ＰＲＩＳＭＡ优化法选择出展开剂的最佳组成为：甲醇／乙腈／四氢呋喃／水＝８０：８．２：５．８：６，在此色谱条件下，十对氨基酸对映体得到良好的分离，Ｄ－和Ｌ－氨基酸的相对比移值在１．０９－２．４０之间。文中对配体交换薄层的制备方法，样品的分子结构及色谱行为     

Separation of organophosphorus pesticides by using nano-liquid chromatography

In the present research, the separation of a series of organophosphorus pesticides (fensulfothion, fenamiphos, profenofos, fonofos, isofenphos, dialifos, sulprofos and prothiofos), by using nano-liquid chromatography (nano-LC) with UV detection is described. Three 100 μm ID capillary columns, packed with different silica-based stationary phases (CN, C₁₈, and phenyl), were investigated. Among these, the phenyl column offered the best results in terms of chromatographic performance, and was selected for pesticide analyses. Parameters, such as sample dilution solvent, injection volume, mobile phase composition and flow rate, were optimized in order to define the ideal experimental conditions. With the aim of improving sensitivity, on-column focusing of large injection volumes was applied: a sensitivity increase of circa 100-fold was attained, with limits of detection (LODs) and quantification (LOQs) within the 4.4–37.5 and 14.5–125.0 ng/mL ranges, respectively. The method was validated, with satisfactory results, through the measurement of the following parameters: limits of detection and quantification, precision, linearity and recovery. Finally, five different baby foods, previously fortified with a solution of the eight aforementioned pesticides, and then subjected to liquid–liquid extraction and solid-phase extraction clean-up, were analyzed.     

Pharmaceutical analysis by supercritical fluid chromatography: Optimization of the mobile phase composition on a 2-ethylpyridine column

The separation of neutral, acidic, and basic pharmaceuticals with diverse physicochemical properties by packed column supercritical fluid chromatography (pSFC) on a 2-ethylpyridine column (25 cmx4.6 mm id, 3 mum particles) is presented. The optimization strategy involved separations at 100% methanol (MeOH) and at 50% MeOH/50% ACN while keeping the peak symmetry additives formic acid (FA) and isopropylamine (IPA) at constant levels of 0.25% v/v. By plotting the adjusted retention times as a function of the MeOH/ACN ratio, an optimal modifier ratio composition of 65% MeOH/35% ACN was found. The total set of 26 neutral, acidic, and basic pharmaceuticals was analyzed and the optimal composition experimentally verified. This mobile phase composition is currently used in pharmaceutical method development and open-access generic screening environments.     

Development of a liquid chromatography/tandem mass spectrometry method for the quantification of fumonisin B1, B2 and B3 in cornflakes

A liquid chromatography/tandem mass spectrometry (LC/MS/MS) method for the determination of fumonisin B1 (FB1), B2 (FB2) and B3 (FB3) in cornflakes is described. During method development, special attention was paid to the selection of a suitable internal standard (IS) in order to offer a good alternative for deuterated FB1. In this respect, the C12-sphinganine analogue (2S,3R)-2-aminododecane-1,3-diol was chosen because of its structural similarity to the fumonisin backbone and its chromatographic elution between the target analytes. For the extraction of the fumonisins from the cornflakes matrix, MeOH/H2O (adjusted to pH 4 with 0.1 M HCl; 70:30, v/v), ACN/MeOH/H(2)O (25:25:50, v/v/v) and acidified ACN/MeOH/H2O (25:25:50, v/v/v; pH 4) were evaluated. Preference was given to acidified MeOH/H2O (70:30, v/v) with mean recoveries (n=12) for FB1, FB2 and FB3 of, respectively, 84+/-10, 78+/-7 and 85+/-9%. Cleanup was performed using immunoaffinity columns (FumoniTest, VICAM). The chromatography was performed under isocratic conditions at a flow of 0.3 mL min-1 with a mobile phase consisting of ACN/H2O (60:40, v/v) containing 0.3% formic acid. The mass spectrometer was operated in the positive electrospray ionization (ESI+) mode using multiple reaction monitoring (MRM). An intralaboratory validation was conducted with fortified samples determining limits of detection (LOD), limits of quantification (LOQ), precision, trueness, specificity and measurement uncertainty. The LOD concentrations for FB1, FB2 and FB3 were 20, 7.5 and 12.5 microg/kg. The LOQs were 40 microg/kg for FB1, 15 microg/kg for FB2 and 25 microg/kg for FB3. The coefficients of variation (CVs) under repeatability conditions varied from 11 to 13% for FB1, from 9 to 14% for FB2 and from 7 to 10% for FB3. Under within-laboratory reproducibility conditions, the CVs ranged from 12 to 17% for FB1, from 9 to 16% for FB2 and from 7 to 13% for FB3. The percent bias for FB1 varied from -12 to -10%, while for FB2 and FB3 bias ranged, respectively, from -4 to -2% and from -12 to -5%. The expanded measurement uncertainties for FB1, FB2 and FB3 were, respectively, 19, 18 and 22%.     

Optimization of the separation of flavonoids using solvent-modified micellar electrokinetic chromatography

In this work the separation of eighteen flavonoids was attempted using reduced-flow micellar elektrokinetic chromatography (RF-MEKC) electrolytes modified by selected solvents with differing properties: methanol (MeOH), acetonitrile (ACN) and tetrahydrofuran (THF). Structural aspects such as unsaturation of the C ring, number and position of OH groups, methylation and glycosylation as well as solvent effects and their impact on the electrophoretic behavior of flavonoids were addressed. By evaluating the electropherograms obtained from mixture-designed electrolytes and searching for changes in the critical pairs, a favorable separation condition was achieved using 20 mmol/L phosphate buffer at pH 2.5 containing 50 mmol/L sodium dodecyl sulfate (SDS), 15% ACN and 5% THF (one critical pair) in less than 12 min with 1.5% coefficient of variation (CV) for retention factor and 3% CV for peak area (n = 5). The applicability of the proposed separation condition was demonstrated by the inspection of flavonoids in herbal extracts of Neem.     

Enantiomeric separation of furan derivatives and fused polycycles by cyclodextrin-modified micellar capillary electrophoresis

The enantiomeric separations of highly hydrophobic furan derivatives and polycycles were performed and optimized using CD-modified micellar CE. The most effective chiral selector for the enantiomeric separation of these analytes was hydroxypropyl-gamma-CD. The effects of CD and SDS concentration and organic modifier were examined in order to optimize the separation conditions. The ratio of CD to surfactant concentration affected the enantiomeric separation significantly, with increases in the derivatized CD concentration generally enhancing resolution. Addition of an organic solvent modifier to the run buffer served to increase the analytes' solubility and enhance the separation efficiency. A highly acidic pH was necessary to effectively suppress the EOF when operating in the reverse polarity mode.     

Use of different stationary phases for separation of isoniazid, its metabolites and vitamin B6 forms

The ability of different stationary phases developed for the analysis of polar compounds (ZIC-HILIC, ZIC-pHILIC and Zorbax SB-Aq) to separate isoniazid, its metabolites (acetylisonazid, pyridoxal isonicotinoyl hydrazone, pyridoxal isonicotinoyl hydrazone 5-phosphate), pyridoxine, pyridoxal and pyridoxal 5-phosphate under MS compatible conditions was systematically investigated using HPLC-UV. The mobile phase strength, pH and buffer concentration were modified to assess their impact on the retention of these compounds. The best available separation of the compounds was achieved using 1 mM ammonium formate (pH≈6) and ACN (20:80, v/v) on ZIC-HILIC and employing 5 mM ammonium formate (pH 3.0) and ACN (40:60, v/v) on ZIC-pHILIC. A gradient profile using 0.5 mM ammonium formate (pH≈6) and MeOH (0-12 min: 10% MeOH, 12-15 min: 10-50% MeOH, 15-35 min: 50% MeOH, 35.0-35.2 min: 50-10% MeOH, 35.2-45.0 min: 10% MeOH) provided the best separation of the compounds on Zorbax SB-Aq. Subsequent LC-MS analysis demonstrated that ZIC-HILIC is useful for the analysis of pyridoxine, pyridoxal and pyridoxal isonicotinoyl hydrazone. However, the chromatographic conditions developed for the analysis of the compounds on Zorbax SB-Aq are capable of achieving the best separation of all compounds in this study with the higher sensitivity for most of the analytes.     

Separation and determination of flavonoids using microemulsion EKC with electrochemical detection

A selective and sensitive method of microemulsion EKC (MEEKC) with electrochemical detection (ED) was developed for separation and determination of 14 flavonoids. In order to obtain the better stability for the studied flavonoids, oil (ethyl acetate) with low interfacial surface tension was employed as organic solvent. A running buffer composed of 0.9% (w/v, 30 mM) SDS, 0.9% (w/v, 21 mM) sodium cholate (SC), 0.9% (w/v, 121 mM) butan-1-ol, 0.6% (w/v, 68 mM) ethyl acetate, and 98.2% v/v 10 mM Na(2)B(4)O(7)-20 mM H(3)BO(3) buffer (pH 7.5) was applied for the separation of flavonoids. Under the optimum conditions, the relationship between peak currents and analyte concentrations was linear over about 1.3 and 1.7 orders of magnitude with detection limits (defined as S/N = 3) ranging from 0.02 to 0.5 microg/mL for all analytes. This method was applied for the determination of flavonoids in real samples with simple extraction procedures, and the assay results were satisfactory.     

Selectivity comparison of acetonitrile-methanol-water ternary mobile phases on an octadecylsiloxane-bonded silica stationary phase

The solvation parameter model was used in this study to investigate various intermolecular interactions that influence retention on the standard C18 stationary phase for the solvent system acetonitrile:methanol (ACN:MeOH, 1:1). In comparison to the organic mobile phase modifiers acetonitrile, acetone, methanol, 2-propanol, and tetrahydrofuran, the solvent strength for the ACN:MeOH (1:1) solvent system was evaluated. To facilitate the interpretation of various intermolecular interactions that contribute to retention on a standard C18 stationary phase for the solvent system ACN:MeOH (1:1), system maps were constructed and compared with those of acetone, tetrahydrofuran, acetonitrile, 2-propanol, and methanol. The solvation parameter models were constructed for the ternary solvent system ACN:MeOH (1:1)-water, and in the models constructed, the coefficient of determination values were from 0.998 to 0.999, the Fisher statistic values for the models were from 1687 to 4015, and the standard error of the estimate values ranged from 0.022 to 0.029. The solvent system ACN:MeOH (1:1) has retention properties more similar to methanol than acetonitrile, indicating methanol's influence is more dominant.     

ESI-MS studies of mixed-ligand Fe(II) complexes containing 1,10-phenanthroline and 1,10-phenanthroline-5,6-dione as ligands

In order to monitor the progression of the synthesis and the separation of novel mixed-ligand iron complexes containing 1,10-phenanthroline, 1,10-phenanthroline-5,6-dione, and NCS- as ligands all products were mass analyzed by electrospray ionization ion trap MS/MS. The spectra of methanol (MeOH), acetonitrile (ACN), water, and ethanol (EtOH) solutions were collected and the results were compared. It was detected under applied electrospray ionization mass spectrometry (ESI-MS) conditions that MeOH, water, and EtOH formed solvent clusters around the free or complexed 1,10-phenanthroline-5,6-dione. Owing to the solvent-ligand hydrogen-bond formation, the solvent-ligand clusters were formed in the polar protic solvents. The number of protic solvent molecules per complex ion in cluster depended on the number of 1,10-phenanthroline-5,6-dione ligands in the complex ion. Unlike MeOH, EtOH, or water, ACN was not involved in the formation of the solvent clusters with the iron complexes containing 1,10-phenanthroline-5,6-dione as ligand. We also showed that the NCS- group under certain solvent conditions served as a bidentate ligand.     

Azithromycin as a new chiral selector in capillary electrophoresis

In capillary electrophoresis (CE), separation of enantiomers of a chiral compound can be achieved through the chiral interactions and/or complex formation between the chiral selector and the enantiomeric analytes on leaving their diastereomeric forms with different stability constants and hence different mobilities. A great number of chiral selectors have been employed in CE and among them macrocyclic antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. The use of azithromycin (AZM) as a chiral selector has not been reported previously. This work reports the use of AZM as a chiral selector for the enantiomeric separations of five chiral drugs and one amino acid (tryptophan) in CE. The enantioseparation is carried out using polar organic mixtures of acetonitrile (ACN), methanol (MeOH), acetic acid and triethylamine as run buffer. The influences of the chiral selector concentration, ACN/MeOH ratio, applied voltage and capillary temperature on enantioseparation are investigated. The results show that AZM is a viable chiral selector in CE for the enantioseparation of the type of chiral drugs investigated.     

Analysis of perfluorinated chemicals in sludge: Method development and initial results

A fast, rigorous method was developed to maximize the extraction efficacy for ten perfluorocarboxylic acids and perfluorooctanesulfonate from waste-water-treatment sludge and to quantitate using liquid chromatography, tandem-mass spectrometry (LC/MS/MS). First, organic solvents were tested for extraction efficiency, including acetonitrile (ACN), methanol (MeOH), isopropanol (IPA), tetrahydrofuran (THF), and 50/50 ACN/MeOH (v/v). Among the extractants tested, 50/50 ACN/MeOH yielded the best results for our combined criteria of extraction efficacy and solvent-handling convenience. Second, chemical pretreatment prior to solvent extraction was tested with sodium hydroxide (NaOH), potassium hydroxide (KOH), hydrochloric acid (HCl), and potassium persulfate (K₂S₂O₈). Pretreatment with NaOH and HCl effectively recovered additional PFCs from the sludge, but KOH and K₂S₂O₈ digestion were less effective than no pretreatment. Third, cleanup methods were investigated with solid-phase extraction using HLB (hydrophilic–lipophilic balanced) and WAX (weak-anion exchange) stationary phases, and with ion-pairing. The HLB stationary phase yielded a slight edge over the other two cleanup strategies in terms of recoverable PFCs and chromatographic separation. Finally, the appropriateness of isotopically labeled PFCs for quantitating unlabeled PFCs using isotopic dilution in complex sludge extracts was evaluated by comparison to results obtained with the standard-addition method. A National Institute of Standards and Technology (NIST) domestic sludge (CRM 2781) was analyzed using our finalized method and compared with previously reported results.     

A comparative study of micellar and microemulsion EKC for the analysis of benzoylurea insecticides and their analogs

An investigation of the basic factors which govern the microemulsion EKC (MEEKC) and MEKC for the separation of four benzoylurea (BU) insecticides and their four analogs was carried out. In MEEKC, the separation of eight BU compounds was optimized by changing the microemulsion composition, such as concentration of SDS, octane, n-butanol, and isopropanol percentages, as well as capillary temperature. Separation optimization was also carried out for MEKC, showing that ACN and a high level of another additive gamma-CD were needed to achieve effective separation of these analytes. Although separation with baseline resolution was achieved by either MEEKC or MEKC methods, the separation selectivity resulting from the proposed MEEKC method was completely different from that of MEKC. In addition, analytical time in MEEKC was longer than that in MEKC, but in view of theoretical plate numbers, detection limits, and reproducibility, both methods were effective for the analysis of BU insecticides and their analogs.     

Current measurement of nonaqueous solvents: Applicatons to capillry electrophoresis and electrochromatography

The solvents acetonitrile, methanol, N, N-dimethylformamide, dimethyl sulfoxide, formamide, and deionized water were investigated for their ability to support current flow without added electrolyte. Using open tubular capillary electrophoresis, currents were measured to be in the nanoampere (10^?9 A) range for all solvents but formamide (10^?6 A). Comparisons with flow data showed no clear relationship between current and electroosmotic flow. Packed capillary columns (3-μm ODS) were used for separations using both pure solvent and hydrophobic dyes showed mild retention in pure ACN. A 16 polynuclear aromatic hydrocarbon (PAH) standard soluton was separated in 80/20 ACN/H₂O with reduced plate heights (h) between 2.8 and 3.1 for retained species. A separation of nine androstenediones was achieved using a 70/30 MeOH/H₂O mobile phase.     

Optimization of flavanones extraction by modulating differential solvent densities and centrifuge temperatures

Understanding the factors influencing flavonone extraction is critical for the knowledge in sample preparation. The present study was focused on the extraction parameters such as solvent, heat, centrifugal speed, centrifuge temperature, sample to solvent ratio, extraction cycles, sonication time, microwave time and their interactions on sample preparation. Flavanones were analyzed in a high performance liquid chromatography (HPLC) and later identified by liquid chromatography and mass spectrometry (LC-MS). The five flavanones were eluted by a binary mobile phase with 0.03% phosphoric acid and acetonitrile in 20 min and detected at 280 nm, and later identified by mass spectral analysis. Dimethylsulfoxide (DMSO) and dimethyl formamide (DMF) had optimum extraction levels of narirutin, naringin, neohesperidin, didymin and poncirin compared to methanol (MeOH), ethanol (EtOH) and acetonitrile (ACN). Centrifuge temperature had a significant effect on flavanone distribution in the extracts. The DMSO and DMF extracts had homogeneous distribution of flavanones compared to MeOH, EtOH and ACN after centrifugation. Furthermore, ACN showed clear phase separation due to differential densities in the extracts after centrifugation. The number of extraction cycles significantly increased the flavanone levels during extraction. Modulating the sample to solvent ratio increased naringin quantity in the extracts. Current research provides critical information on the role of centrifuge temperature, extraction solvent and their interactions on flavanone distribution in extracts.     

Statistical mixture design optimization of extraction media and mobile phase compositions for the characterization of green tea

The influence of different solvents on the extraction medium and the RP-HPLC mobile phase composition were investigated by statistical mixture designs to optimize solvent proportions to prepare the fingerprint of a medicinal herbal extract. For modeling, the number of peaks was used as a measure of fingerprint information. The optimum compositions of solvent to extract chemical substances from green tea and for mobile phase chromatographic analysis were ethyl acetate/ ethanol/dichloromethane (20:5:75 v/v/v) and MeOH/ACN/water (7.5:57.5:35 v/v/v), respectively. This system results in 26 peaks in the chromatographic fingerprint. These results show that an incorrect choice of modifiers for mobile phase composition and solvent extraction hampers the detection of a maximum number of peaks and produces a poor chromatographic fingerprint.     

High-performance liquid chromatographic separation of the enantiomers of organophosphorus pesticides on polysaccharide chiral stationary phases.

High-performance liquid chromatographic separation of the individual enantiomers of 12 organophosphorus pesticides (OPs) was obtained on polysaccharide enantioselective HPLC columns using alkane-alcohol mobile phase. The OP pesticides were crotoxyphos, dialifor, fonofos, fenamiphos, fensulfothion, isofenphos, malathion, methamidophos, profenofos, crufomate, prothiophos and trichloronate. The enantiomers of fenamiphos, fensulfothion, profenofos and crufomate were separated on CHIRALPAK AD; the enantiomers of fenamiphos were also separated on CHIRALPAK AS; the enantiomers of methamidophos, crufomate and trichloronate were separated on CHIRALCEL OD; the enantiomers of crotoxyphos, dialifor, fonofos, malathion, prothiophos and trichloronate were separated on CHIRALCEL OJ; and the enantiomers of isofenphos were separated on CHIRALCEL OG. Baseline or partial separation of the enantiomers of six of these OP pesticides was obtained on CHIRALCEL OJ. In continued method development, the separation of the enantiomers of the 12 OPs was investigated more extensively on CHIRALCEL OJ to determine whether the mobile phase composition, flow-rate and column temperature could be optimized to yield at least partial separation of the enantiomers. Chromatographic conditions were found that gave either baseline or near baseline separations of the enantiomers of the 12 OPs on the CHIRALCEL OJ column.     

Effects of organic modifiers on solute retention and electrokinetic migrations in micellar electrokinetic capillary chromatography.

Influences of seven organic modifiers, including urea, methanol (MeOH), dioxane (DIO), tetrahydrofuran (THF), acetonitrile (ACN), 1-propanol (1-PrOH) and 2-propanol (2-PrOH), on the solute retention and the electrokinetic migrations in micellar electrokinetic capillary chromatography (MEKC) are investigated with sodium dodecyl sulfate (SDS) micelle as pseudostationary phase. It is observed that in the limited concentration ranges used in the MEKC systems the effect of organic modifier concentration on the retention can be described by the equation logk1=logk1w-SC for most binary aqueous-organic buffer, but deviations from this retention equation are observed at ACN and particularly THF as organic modifiers. With parameter S as a measure of the elutropic strength, the elutropic strength of the organic modifiers is found to follow a general order urea 相似文献