Selective extraction of Fe3+ by a polymeric calix[4]arene

A polymeric compound containing more than one calixarene molecule was synthesized by reacting the oligomer ( 2 ) with 25,26,27-tribenzoyloxy-28-hydroxy calix[4]arene. After basic hydrolysis of 3a , the polymeric calixarene ( 3b ) was utilized for selective extraction of some metal cations from aqueous phase to organic phase. It was found that the compound ( 3b ) was selective toward Fe³⁺ from an aqueous solution containing Cu²⁺, Ni²⁺, Co²⁺ and Fe³⁺ cations. The mechanism of the extraction process was discussed. © 1994 John Wiley & Sons, Inc.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Lower rim substituted p-tert-butyl calix[4]arene; Part 14. Synthesis, structures and binding studies of calix[4]arene thioamides

A number of p-tert-butylcalix[4]arene thioamides were synthesized and characterized by ¹H-NMR and elemental analysis. Compounds 1–5 are O-substituted derivatives with –CH₂–C(=S)–N–X groups, where NX = morpholidyl, NEt₂, NHC₂H₄Ph, NHCH₂Ph and NHEt, respectively. The X-ray structures of the ligands 1, 3, 5 and of the complex 3·Pb(ClO₄)₂, (compound 6), are presented and their slightly distorted cone conformation is established. The influence of the nature of the thioamide functions (secondary or tertiary) on the extractability of some selected metal cations was investigated. Whereas all these calixarenes show the highest extraction level for Ag⁺, tertiary thioamides are more efficient extractants for Pb²⁺ than secondary thioamides.     

Synthesis of upper rim calix[4]arene carcerands

The synthesis of novel tetra-olefinic calix[4]arene carcerands is described using a synthetic strategy involving palladium catalysed Heck coupling followed by imine formation.     

Synthesis and binding properties of calix[4]arene telomers

Two calix[4]arene derivatives (5 and 8) and their telomers are synthesized to estimate selective extraction of alkali and transition metal cations from the aqueous to the organic phase (chloroform). Compound 5 shows selectivity toward Hg²⁺. Compound 8 and telomers 6 and 9 are not selective but are good extractants for all used transition metal ions. The observations suggest that ethylene glycol bridges are efficient for carrying transition metal cations in a two-phase solvent system. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4351–4355, 1999     

四乙氧羰基甲氧基杯[4]芳烃的合成与性质

配位作用;液膜传递;四乙氧羰基甲氧基杯[4]芳烃的合成与性质     

Asymmetric calix[4]-thiacalix[4]arene tubes: Synthesis and ionophore properties

Asymmetric p-tert-butylcalix[4]-p-R-thiacalix[4]arene tubes (R = tert-Bu, H, 1-adamantyl) were prepared for the first time by reaction of tosyloxyethoxy derivative of p-tert-butylcalix-[4]arene and the corresponding p-R-thiacalix[4]arenas in acetonitrile in the presence of K₂CO₃. Complex formation of compounds obtained with sodium, potassium, and rubidium iodides in CDCl₃-CD₃OD, 4:1, was studied by means of ¹H NMR. The ionophore properties of the molecule were governed by the character of substituents on the upper rim of the thiacalixarene fragment, and only the molecular tube containing a fragment of the p-(1-adamantyl)-thiacalix[4]arene quantitatively bound potassium ions (quickly) and rubidium ions (slowly).     

Synthesis and fluorescence enhancement of oligophenylene-substituted calix[4]arene assemblies

Tetra-oligophenylene substituted calix[4]arene assemblies containing up to three phenylene units have been synthesized by a convergent approach using Suzuki cross-coupling and their optical properties were investigated and compared with the corresponding monomer.     

Synthesis and crystal structure of p-acylated calix[4]arene ethers

C-acylation of calix[n]arenes is an important reaction which has been primarily utilized for their further functionalization to provide conformers with varying shapes, cavity dimensions and molecular receptor characteristics that can bind ionic and neutral species in a selective and specific manner. The length of the alkyl chain at the upper or the lower rim of calixarenes can be adjusted as required to give derivatives which can span the channels and membranes and majorly influence transport phenomenon. As a part of our program to obtain calixarene based derivatives that can span and scan artificial membranes, C-acylation of calix[4]arene has been examined to yield peracylated and partially acylated calixarene ethers. 5,11,17,23-Tetraacetyl-25,26,27,28-tetramethoxycalix[4]arene has been obtained in 80 % yield by treatment of tetramethoxycalix[4]arene with acetyl chloride in the presence of aluminum chloride using dichloromethane as the solvent. The structure was established by the conversion to corresponding phenyl hydrazones and oximes. The tetraacetyltetramethoxycalix[4]arene 2a crystallized in a monoclinic lattice, space group P2₁/C with a = 10.320(2) Å, b = 18.928(4) Å, c = 18.421(4) Å, β = 95.44(3)^o, Z = 4. The corresponding methyl substituted O7 directs inwards towards the cavities of calix[4]arene to give an inward flattened partial cone conformation. Molecular packing shows the presence of intermolecular C–H···O, H-bonding interactions between methyl and methylene hydrogens and oxygens of the acetyl groups.     

A [2]catenane containing an upper-rim functionalized calix[4]arene for anion recognition

A novel [2]catenane is synthesized in good yield from an upper-rim functionalized calix[4]arene macrobicycle and a nitro-substituted isophthalamide threading component in the presence of a chloride anion template via a ring-closing metathesis (RCM) reaction. After halide anion template removal the resulting catenane host exhibits a high degree of selectivity for chloride in competitive organic solvent mixtures.     

Heterodimerization studies of calix[4]arene derivatives in polar solvents

[reaction: see text] Several calix[4]arene derivatives propylated on the lower rim and substituted on the upper rim with amino or carboxyl groups have been synthesized. Examples include calixarenes substituted with alanino (C- and N-linked), amino, carboxy, carboxyphenyl, and amidino groups. The self-assembly of these derivatized calixarenes into heterodimers has been studied by NMR in DMSO-d(6) or CD(3)OD with 5% aqueous phosphate buffer.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Supramolecular interaction between water-soluble calix[4]arene and ATP--the catalysis of calix[4]arene for hydrolysis of ATP

The catalysis effect of water-soluble calix[4]arene C[4] (calix[4]arene-5,11,17,23-tetrasulfonate) on hydrolysis of ATP in aqueous solution was studied by HPLC. Using laser photolysis and pulse radiolysis, the supramolecular interaction between water-soluble calix[4]arene and ATP was investigated.     

Synthesis of two calix[4]arene diamide derivatives for extraction of chromium(VI)

The synthesis of four diamide derivatives of the p-tert-butylcalix[4]arenes from the reaction of 5,11,17,23-tetra-tert-butyl-25,27-diethoxycarbonylmethoxy-26,28-dihydroxycalix[4]arene 2 with various primary amines were reported. The ¹H and ¹³C NMR, data showed that the synthesized compounds exist in the cone conformation. The complexing properties of these compounds toward Cr₂O₇²⁻/HCr₂O₇⁻ anions are also studied. It has been observed that receptors 5 and 6 are better extractant than the compounds 3 and 4. The protonated alkyl ammonium form of 5 and 6 is an effective extractant for transferring HCr₂O₇⁻/Cr₂O₇²⁻ anions from an aqueous phase into a dichloromethane layer.     

Unsymmetrical calix[4]arene bisporphyrin Pacman

[structure: see text] The synthesis of a Pacman heterobisporphyrin associating an octaethyl porphyrinatozinc (ZnOEP) energy donor and a triaryl porphyrinatozinc (ZntPP) energy acceptor around a calix[4]arene spacer is described. Contrary to previous symmetrical architectures, correlations between the chromophores in the unsymmetrical calixarene bisporphyrin Pacman scaffold can now be observed in ROESY experiments. Independent of the excitation wavelength, only the luminescence of the ZntPP moiety was observed corresponding to quenching of the OEP moiety's emission.     

Selective extraction of toxic heavy metals and biological activity studies using pyrimidylthioamide functionalised calix[4]arene

The current study comprises synthesis of pyrimidylthioamide derivatized calix[4]arene (5), and its comparative liquid–liquid extraction properties with the compound 4 towards the selected transition metal ions (Cu²⁺, Co²⁺, Ni²⁺, Pb²⁺, Hg²⁺ and Cd²⁺) were investigated. Experimental results revealed that the compound 5 shows better efficiency and affinity for Pb²⁺ and Hg²⁺ ions as compared to compound 4. The antibacterial and antifungal effects of compound 5 were also investigated on various bacteria and fungi. It has been observed that compound 5 has some effects against Salmonella typhimurium NRRLB 4420, Bacillus cereus ATCC 11778, Staphylococcus aureus NRRL B767 and Bacillus subtilis NRS 744.     

Synthesis and amino acid extraction abilities of chiral calix[4]arene triamides containing amino alcohol units

Herein the synthesis and extraction abilities of new d-/l-phenylalaninol substituted p-tert-butylcalix[4]arene triamide derivatives (3 and 4) towards amino acids are reported. These compounds (3 and 4) have been easily synthesized via aminolysis of p-tert-butylcalix[4]arene trimethylester (2) with d-/l-phenylalaninol in methanol-toluen solvent system at one step. The extraction properties of the prepared chiral calix[4]arene triamide derivatives (3 and 4) towards some selected amino acid methylesters are studied by liquid–liquid extraction. Results show that these chiral calix[4]arene triamide derivatives (3 and 4) exhibited a good affinity towards all amino acid species without any remarkably discrimination.     

Synthesis and Conformational Properties of Bis（calix [4] arene）

The bis(calix [4] arene)3 was synthesized in moderate yield by the reaction of p-tert-butylcalix [4] arene (1) with 1,4-bis(chloromethyl) benzene (2). The conformation of all alkylated product 4 was investigated by the variable-temperature ^1H-NMR.     

Organic clays. Synthesis and structure of Na5[calix[4] arene sulfonate] · 12 H2O,K5[calix[4]arene sulfonate]·8 H2O,Rb5[calix[4]arene sulfonate]·5 H2O,and Cs5[calix[4] arene sulfonate] ·4 H2O

The title calixarenes all exist in the solid state as bilayers of anionic calixarenes in the cone configuration. These layers alternate with inorganic regions which contain the cations and the water molecules. The overall structures bear a close resemblance to those found for clay minerals. The sodium salt crystallizes in the triclinic space groupP witha = 10.998(6),b = 13.582(5),c = 14.472(5) Å, = 74.01(3), = 89.09(4), = 86.50(4)°, andZ = 2 forD _calc = 1.72 g cm^–3. Refinement based on 4727 observed reflections led to a conventionalR = 0.050. The potassium salt crystallizes in the triclinic space groupP witha = 11.815(9),b = 13.636(6),c = 14.040(9) Å, = 100.24(5), = 111.86(9), = 95,14(9)°, andZ = 2 forD _calc = 1.77 g cm^–3. Refinement based on 2977 observed reflections led toR = 0.15. The rubidium and cesium salts are isostructural and crystallize in the monoclinic space groupP2₁/n with parameters for Rb[Cs]a = 11.603(5) [11.704(3)],b = 28.607(8) [29.747(9)],c = 12.512(5) [12.604(4)] Å, = 91.70(4) [91.63(2)°], andZ = 4 forD _calc = 2.01 [2.24] g cm^–3. Refinement based on 1750 [4257] observed reflections led toR = 0.108 [0.075]. Disorder of the cations was observed for the rubidium and cesium salts. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82074 (95 pages).