Surfactant templating effects on the encapsulation of iron oxide nanoparticles within silica microspheres

Hollow silica microspheres encapsulating ferromagnetic iron oxide nanoparticles were synthesized by a surfactant-aided aerosol process and subsequent treatment. The cationic surfactant cetyltrimethyl ammonium bromide (CTAB) played an essential role in directing the structure of the composite. Translation from mesoporous silica particles to hollow particles was a consequence of increased loading of ferric species in the precursor solution and the competitive partitioning of CTAB between silicate and ferric colloids. The hypothesis was that CTAB preferentially adsorbed onto more positively charged ferric colloids under acidic conditions. At a critical Fe/Si ratio, most of the CTAB was adsorbed onto ferric colloids and coagulated the colloids to form larger clusters. During the aerosol process, a silica shell was first formed due to the preferred silicate condensation on the gas-liquid interface of the aerosol droplet. Subsequent drying concentrated the ferric clusters inside the silica shell and resulted in a silica shell/ferric core particle. Thermal treatment of the core shell particle led to encapsulation of a single iron oxide nanoparticle inside each silica hollow microsphere.     

Nanographite impurities in carbon nanotubes: their influence on the oxidation of insulin, nitric oxide, and extracellular thiols

There has been growing interest in the use of modified-carbon-nanotube electrodes in applications such as the electrochemical detection of biologically significant compounds, owing to their apparent "electrocatalytic" properties and ability to enhance oxidative signals. In spite of their salient properties, little work has been done to further examine the reasons for these reported characteristics. In this report, we present clear evidence that the presence of nanographite impurities within carbon nanotubes (CNTs) is responsible for providing the previously reported enhanced electrochemical response. We have demonstrated this effect on homocysteine, N-acetyl-L-cysteine, nitric oxide, and insulin, which are important biological agents in the body. Moreover, we also showed that the influence of nanographite impurities on the electrochemistry of carbon nanotubes is prevalent among a variety of CNTs, such as single-walled CNTs, double-walled CNTs, and few-walled CNTs. Our findings will have a profound influence upon the biomedical applications of CNTs.     

The electro-oxidation of carbon monoxide and ethanol on supported Pt nanoparticles: the influence of the support and catalyst microstructure

The sluggish kinetics of ethanol oxidation on Pt-based electrodes is one of the major drawbacks to its use as a liquid fuel in direct ethanol fuel cells, and considerable efforts have been made to improve the reaction kinetics. Herein, we report an investigation on the effect of the Pt microstructure (well-dispersed versus agglomerated nanoparticles) and the catalyst support (carbon Vulcan, SnO₂, and RuO₂) on the rate of the electrochemical oxidation of ethanol and its major adsorbed intermediate, namely, carbon monoxide. By using several structural characterization techniques such as X-ray diffraction, X-ray absorption spectroscopy, and transmission electron microscopy, along with potentiodynamic and potentiostatic electrochemical experiments, we show that by altering both the Pt microstructure and the support, the rate of the electrochemical oxidation of ethanol can be improved up to a factor of 12 times compared to well-dispersed carbon-supported Pt nanoparticles. As a result of a combined effect, the interaction of Pt agglomerates with SnO₂ yielded the highest current densities among all materials studied. The differences in the activity are discussed in terms of structural and electronic properties as well as by mass transport effects, providing valuable insights to the development of more active materials.     

Iron oxide nanoparticles within the pore system of mesoporous SBA-15 in different acidity: the synthesis and characterization

Direct hydrothermal method is employed for incorporating iron into the pore structure of SBA-15. The resultant materials were analyzed by X-ray diffraction (XRD) patterns, N₂ sorption isotherm and X-ray photoelectron spectroscopy (XPS). The characterizations of XRD patterns and XPS revealed that iron nanoparticles were present as highly dispersed nanoclusters in the well-ordered mesoporous channels of SBA-15. The characterizations of t-plot reveal only microporous channels of SBA-15 are confirmed to be filled with iron nanoparticles, leaving the mesopores unaffected. The supported material still maintained its ordered mesoporous structure similar to SBA-15 and possessed high surface area, large pore volume and uniform pore size.     

Colloidal stability of magnetic iron oxide nanoparticles: influence of natural organic matter and synthetic polyelectrolytes

The colloidal behavior of natural organic matter (NOM) and synthetic poly(acrylic acid) (PAA)-coated ferrimagnetic (γFe(2)O(3)) nanoparticles (NPs) was investigated. Humic acid (HA), an important component of NOM, was extracted from a peat soil. Two different molecular weight PAAs were also used for coating. The colloidal stability of the coated magnetic NPs was evaluated as a resultant of the attractive magnetic dipolar and van der Waals forces and the repulsive electrostatic and steric-electrosteric interactions. The conformational alterations of the polyelectrolytes adsorbed on magnetic γFe(2)O(3) NPs and their role in colloidal stability were determined. Pure γFe(2)O(3) NPs were extremely unstable because of aggregation in aqueous solution, but a significant stability enhancement was observed after coating with polyelectrolytes. The steric stabilization factor induced by the polyelectrolyte coating strongly dictated the colloidal stability. The pH-induced conformational change of the adsorbed, weakly charged polyelectrolytes had a significant effect on the colloidal stability. Atomic force microscopy (AFM) revealed the stretched conformation of the HA molecular chains adsorbed on the γFe(2)O(3) NP surface at pH 9, which enhanced the colloidal stability through long-range electrosteric stabilization. The depletion of the polyelectrolyte during the dilution of the NP suspension decreased the colloidal stability under acidic solution conditions. The conformation of the polyelectrolytes adsorbed on the NP surface was altered as a function of the substrate surface charge as viewed from AFM imaging. The polyelectrolyte coating also led to a reduction in magnetic moments and decreased the coercivity of the coated γFe(2)O(3) NPs. Thus, the enhanced stabilization of the coated maghematite NPs may facilitate their delivery in the groundwater for the effective removal of contaminants.     

The influence of gaseous impurities on the gold welding of metal surfaces

The analysis of the properties of cold welded metallic junctions as monitored by contact resistance measurements is extended to include the effects of impurities. Brittle fracture of both iron and copper similar metal, cold welded junctions was observed. This is in marked contrast to the bulk properties of these materials. It is believed the fracture properties of these materials were influenced by impurities embrittling the junctions. If impurities caused this behavior, the surface energy would consequently be lowered by these impurities and evidence of this is noted.     

Metal oxide nanoparticles in electrochemical sensing and biosensing: a review

This review (with (318) refs) describes progress made in the design and synthesis of morphologically different metal oxide nanoparticles made from iron, manganese, titanium, copper, zinc, zirconium, cobalt, nickel, tungsten, silver, and vanadium. It also covers respective composites and their function and application in the field of electrochemical and photoelectrochemical sensing of chemical and biochemical species. The proper incorporation of chemical functionalities into these nanomaterials warrants effective detection of target molecules including DNA hybridization and sensing of DNA or the formation of antigen/antibody complexes. Significant data are summarized in tables. The review concludes with a discussion or current challenge and future perspectives.

Open image in new window

Graphical abstract ?

     

Synthesis of gold nanoparticles within a supramolecular gel-phase network

Gold nanoparticles with diameters of ca. 13 nm were synthesised by UV irradiation of a supramolecular organogel into which HAuCl4 and tetraoctylammonium bromide had been diffused-the gel network plays an essential role in nanoparticle stabilisation.     

Determination of rare earth impurities in high purity europium oxide by inductively coupled plasma-mass spectrometry and evaluation of concentration values for europium oxide standard material

Direct determinations of 13 rare earth elements (La, Ce, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Yb, Lu and Y) in high purity europium oxide by inductively coupled plasma mass spectrometry (ICP-MS) have been reported. The operating parameters of the instrument were optimized and the spectral interferences and the matrix effects were investigated. Using Ga or Rh as the internal standard can eliminate most of the matrix effects. The detection limits (3 sigma, n=10, integral time=1s) are 0.013-0.085 ng mL(-1) and the reproducibility (n=11) is 0.9-3%. The recoveries of spiking samples are 80-108%. Europium oxide standard material was made and its concentration values were evaluated by various techniques from 10 collaborating laboratories. By comparison of the results of ICP-MS with the results of other techniques, we have validated that ICP-MS is an accurate and reliable technique for analysis of ultratrace impurities in high purity rare earth matrix.     

Magnetic fluid hyperthermia: focus on superparamagnetic iron oxide nanoparticles

Due to their unique magnetic properties, excellent biocompatibility as well as multi-purpose biomedical potential (e.g., applications in cancer therapy and general drug delivery), superparamagnetic iron oxide nanoparticles (SPIONs) are attracting increasing attention in both pharmaceutical and industrial communities. The precise control of the physiochemical properties of these magnetic systems is crucial for hyperthermia applications, as the induced heat is highly dependent on these properties. In this review, the limitations and recent advances in the development of superparamagnetic iron oxide nanoparticles for hyperthermia are presented.     

Catalyzed radical polymerization of styrene vapor on nanoparticle surfaces and the incorporation of metal and metal oxide nanoparticles within polystyrene polymers

We present a novel approach to polymerize olefin vapors on the surfaces of metallic and semiconductor nanoparticles. In this approach, a free radical initiator such as AIBN is dissolved in a volatile solvent such as acetone. Selected nanoparticles (prepared separately using the laser vaporization-controlled condensation method) are used to form initiator-coated nanoparticles placed on a glass substrate. The olefin (styrene) vapor is polymerized by the thermally activated initiator on the nanoparticle surfaces. Our approach also provides structural and mechanistic information on the early stages of catalyzed gas-phase polymerization, which can be used to correlate the gas-phase structural properties with the bulk properties and the performance of the polymer nanocomposites. This correlation is the key step in controlling the properties of the polymer nanocomposites. Our results clearly demonstrate the success of this method in preparing polymer coated nanoparticles for a variety of interesting applications. The precise control of the chemical functionality, thickness, and morphology of the polymer film and the size, size distribution, and properties of the core nanoparticles (photoluminescence, magnetic) may lead to major technological breakthroughs in a variety of applications including drug delivery, ultrasensitive detectors, and chemical and biological sensors.     

Quantitative three-dimensional microstructure of a solid oxide fuel cell cathode

Solid oxide fuel cells (SOFCs) are being actively developed world wide for clean and efficient electrical generation from fuels such as natural gas, hydrogen, coal, and gasoline. The cathode in state of the art SOFCs is typically a porous composite of electronically-conducting La_1?xSr_xMnO₃ (LSM) and ionically-conducting Y₂O₃-stabilized ZrO₂ (YSZ) that facilitates the critical oxygen reduction reaction. Here we describe the three-dimensional characterization and quantification of key structural parameters from an LSM-YSZ cathode, using imaging and volume reconstruction based on focused ion beam – scanning electron microscopy. LSM-YSZ-pore three-phase boundaries (TPBs) were identified. Approximately 1/3 of the TPBs were found to be electrochemically inactive, as they were on isolated LSM particles, yielding an active TPB density of 4.9 μm^?2. Cathode electrochemical modeling, which included a measured YSZ tortuosity of 3.4, yielded an effective TPB resistance of ≈2.5 × 10⁵ Ω cm at 800 °C.     

Magnetic iron oxide nanoparticle enrichment of phosphopeptides on a radiate microstructure MALDI chip

Several methods can be used to improve the enrichment of phosphorylated proteins. In this paper, phosphopeptides were enriched using magnetic iron(II,III) oxide (magnetite, Fe(3)O(4)) nanoparticles (NPs) on a radiate microstructure silicon chip and then analyzed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) without further purification processes. We have developed a radiate microstructure chip on which samples can be concentrated for analysis by MALDI-TOFMS. The phosphoprotein digests and magnetic iron oxide NPs aqueous solution were deposited onto the central zone of the radiate microstructure silicon chip and enabled the on-chip enrichment of phosphopeptides. Microscopic analysis confirmed that the applied samples were confined to the central zone. Sample spots focused on the chip were much smaller than those on an unmodified plate with the same total volume. Different additives were used and optimized processes were performed to minimize non-phosphopeptides interference. These data collectively demonstrate that our on-chip phosphopeptide enrichment protocol is a rapid and easy-to-use method for phosphoproteome analysis.     

Crystallization of oxytetracycline from fermentation waste liquor: influence of biopolymer impurities

Organic impurities in the fermentation broth of antibiotic production impose great difficulties in the crystallization and recovery of antibiotics from the concentrated waste liquor. In the present laboratory study, the inhibitory effect of biopolymers on antibiotic crystallization was investigated using oxytetracycline (OTC) as the model antibiotic. Organic impurities separated from actual OTC fermentation waste liquor by ultrafiltration were dosed into a pure OTC solution at various concentrations. The results demonstrated that small organic molecules with an apparent molecular weight (AMW) of below 10,000 Da did not affect OTC crystallization significantly. However, large biopolymers, especially polysaccharides, in the fermentation waste caused severe retardation of crystal growth and considerable deterioration in the purity of the OTC crystallized. Atomic force microscopy (AFM) revealed that OTC nuclei formed in the solution attached to the surfaces of large organic molecules, probably polysaccharides, instead of being surrounded by proteins as previously thought. It is proposed that the attachment of OTC nuclei to biopolymers would prevent OTC from rapid crystallization, resulting in a high OTC residue in the aqueous phase. In addition, the adsorption of OTC clusters onto biopolymers would destabilize the colloidal system of organic macromolecules and promote particle flocculation. OTC crystallization would therefore take place with the precipitation of abundant organic impurities. Hence, the removal of polysaccharides and other biopolymers by ultrafiltration can be an effective means of improving the recovery of OTC and similar antibiotics by crystallization from the fermentation waste.     

Synthesis of iron oxide nanoparticles in a polyimide matrix

A monolayer of gamma-Fe(2)O(3) nanoparticles embedded in a polyimide (PI) matrix was fabricated by oxidizing an Fe metal film between two PI precursor layers. There was a critical Fe thickness ( approximately 7 nm) above which a continuous layer of gamma-Fe(2)O(3) film was formed in the PI film. Below the critical Fe thickness, the oxide film broke up into fine particles whose size was approximately 8 nm with narrow size distribution. It was further shown that these nanoparticles could have metallic cores, surrounded by an oxide layer. This method offers a unique way of covering a large surface area with fine magnetic oxide nanoparticles for potential application in high-density data-storage media.     

Enzymatic biosensors based on the use of metal oxide nanoparticles

Over the past decades, various techniques have been developed to obtain materials at a nanoscale level to design biosensors with high sensitivity, selectivity and efficiency. Metal oxide nanoparticles (MONPs) are of particular interests and have received much attention because of their unique physical, chemical and catalytic properties. This review summarizes the progress made in enzymatic biosensors based on the use of MONPs. Synthetic methods, strategies for immobilization, and the functions of MONPs in enzymatic biosensing systems are reviewed and discussed. The article is subdivided into sections on enzymatic biosensors based on (a) zinc oxide nanoparticles, (b) titanium oxide nanoparticles, (c) iron oxide nanoparticles, and (d) other metal oxide nanoparticles. While substantial advances have been made in MONPs-based enzymatic biosensors, their applications to real samples still lie ahead because issues such as reproducibility and sensor stability have to be solved. The article contains 256 references.

Evaluation of the influence of the base material loaded with hydrous zirconium oxide gel on the retention behavior of disubstituted benzoic acids

Summary Silica gel loaded with hydrous zirconium oxide (Zr-gel-S) has been prepared and the influence of the base material on the retention behavior ofo-phthalic acid on the hydrous zirconium oxide was evaluated. The retention behavior of the acid on the Zr-gel-S was compared with that on Zr-gel-5, the polymer-based Zr-gel. Comparable retention behavior,i.e. maximum retention in the vicinity of pH 6, which has been regarded as the equal adsorbic point, was observed for both types of Zr-gel, although there was a large difference in the retention times. The difference in retention on the two types of Zr-gel could be ascribed to nature of the base material. The results in this experiments showed, however, that the specific behavior at pH 6 was an essential characteristic of hydrous zirconium oxide and was not related to the influence of the base materials.