Determination of lead and cadmium in ceramicware leach solutions by graphite furnace atomic absorption spectroscopy: method development and interlaboratory trial.

This method was developed to improve sensitivity and eliminate time consuming, evaporative pre-concentration in AOAC Method 973.82 and American Society for Testing and Materials method C738 for testing foodware. The method was developed using leach solutions obtained by leaching 9 differently decorated ceramic vessels with 4% acetic acid for 24 h at room temperature. Lead and cadmium concentrations in leach solutions were 0.005-17,600 and 0.0004-0.500 microg/mL, respectively. Concentrations were determined using peak area, phosphate chemical modifier (8.3 microg PO4(-3)), and a standard curve for quantitation. Optimized pre-atomization and atomization temperatures were 1,300 and 1,800 degrees C, respectively, for Pb and 1,100 and 1,700 degrees C, respectively, for Cd. Characteristic masses (mo) were 10 and 0.4 pg for Pb and Cd, respectively. Precision of repeated analyses of calibration solutions was < or =3% relative standard deviation. Precision of duplicate leach solution analyses on different days was 0-9% relative difference. Recovery from fortified leach solutions was 96-106%. Results obtained by this method agreed 92-110% with those of confirmatory analyses. Results of certified reference material solutions agreed 94-100% with certificate values. Pb and Cd limits of quantitation (LOQ) were 0.005 and 0.0005 microg/mL, respectively. Results from 3 trial laboratories for 4 leach solutions containing Pb and Cd concentrations of 0.017-1.47 and <0.0005-0.0864 microg/mL, respectively, agreed 89-102% with results of the author. Two attributes of this method were noteworthy: (1) Background absorbance due to organic matter was entirely absent from atomization profiles, making the use of short pre-atomization hold times (2 s) possible. (2) Instrument precision was excellent and only one determination per solution was needed. Acceptance criteria for quality control measurements and a practical procedure for estimating the method LOQ during routine regulatory analyses are described.     

Electroanalytical determination of cadmium and lead in deciduous teeth after microwave oven digestion

A method using differential pulse anodic stripping voltammetry after microwave oven digestion was developed for the simultaneous determination of Cd(II) and Pb(II) in the deciduous teeth of children. Each tooth was weighed; deposited in a 120 mL capped Teflon vessel with 5 mL 65% nitric acid, Suprapur analytical grade; and digested in a 2-step microwave oven for 15 min. The detection limits for Cd(II) and Pb(II) in the final solution were 0.078 and 0.323 microg/L, and the quantitation limits 0.394 and 1.613 microg/L, respectively, with a linearity range of 2 microg/L for Cd(II) and 23.3 microg/L for Pb(II). The sensitivity was 2.51 nA/microg-L and 1.37 nA/microg-L, for Cd(II) and Pb(II). The main advantages of this technique are a complete and satisfactory dissolution of the tooth material with the proposed microwave oven digestion procedure, without sample pretreatments, such as drying, ashing, or powdering. The voltammetric procedure proved to be well designed because of significant goodness of fit to a linear model, and the accuracy of the method was established as compared with standard reference material. The methodology has enabled us to study Cd(II) and Pb(II) in 371 deciduous teeth from school children in Cartagena, Spain.     

Biomonitoring method for the simultaneous determination of cadmium and lead in whole blood by electrothermal atomic absorption spectrometry for assessment of environmental exposure

The aim of this work is to propose a biomonitoring method for the simultaneous determination of Cd and Pb in whole blood by simultaneous electrothermal atomic absorption spectrometry for assessment of environmental levels. A volume of 200 microL of whole blood was diluted in 500 microL of 0.2% (wv(-1)) Triton) X-100+2.0% (vv(-1)) HNO3. Trichloroacetic acid was added for protein precipitation and the supernatant analyzed. A mixture of 250 microg W+200 microg Rh as permanent and 2.0% (wv(-1)) NH4H2PO4 as co-injected modifiers were used. Characteristic masses and limits of detections (n=20, 3s) for Cd and Pb were 1.26 and 33 pg and 0.026 microg L(-1) and 0.65 microg L(-1), respectively. Repeatability ranged from 1.8 to 6.8% for Cd and 1.2 to 1.7% for Pb. The trueness of method was checked by the analysis of three Reference Materials: Lyphocheck Whole Blood Metals Control level 1 and Seronorm Trace Elements in Whole Blood levels 1 and 2. The found concentrations presented no statistical differences at the 95% confidence level. Blood samples from 40 volunteers without occupational exposure were analyzed and the concentrations ranged from 0.13 to 0.71 microg L(-1) (0.32+/-0.19 microg L(-1)) for Cd and 9.3 to 56.7 microg L(-1) (25.1+/-10.8 microgL(-1)) for Pb.     

Determination of cadmium and lead in high purity uranium compounds by flame atomic absorption spectrometry with on-line micro-column preconcentration by CL-7301 resin

An on-line solid phase micro-column extraction and determination system for trace Cd and Pb in nuclear fuel grade uranium compounds was established. The preconcentration of trace elements Cd and Pb from uranium compounds was achieved by adsorbing Cd and Pb on CL-7301 resin in hydroiodic acid media, while the uranyl ion passed through. The method coupled with flame atomic absorption spectrometry (FAAS) was applied to analysis trace Cd and Pb in real samples. The preconcentration factors obtained by this method were 320 and 180 each for Cd and Pb, respectively. Under the optimized conditions, the detection limits corresponding to three times the standard deviation of the blank were found to be 0.13 ng·mL⁻¹ and 0.37 ng·mL⁻¹ for Cd and Pb, respectively. The relative standard deviation (RSD) and the recoveries of standard addition (spiked with 1–5 ng of Cd and Pb) were of <5% (n = 10) and 96.2%–102.3%, respectively. Precision was also evaluated and found to be ≤4.3% (N = 11). The proposed method was successfully used for the determination of trace Cd and Pb in commercially available uranium compounds (e.g., uranyl acetate and triuranium octoxide).     

火焰原子吸收光谱法测定高锑烟尘中的银、铅、镉

建立了火焰原子吸收光谱法测定高锑烟尘中的银、铅、镉的分析方法。试样经王水、高氯酸溶解后,利用四价锑的溴化物沸点较低的性质,将锑挥发除去,以消除基体锑对测定的干扰,在盐酸-高氯酸-硫脲介质中实现了银、铅、镉的连续测定。方法检出限:Ag为0.003 7μg/mL,Pb为0.019 8μg/mL,Cd为0.001 6μg/mL。相对标准偏差(RSD,n=11):Ag为0.92%~1.04%,Pb为1.29%~2.21%,Cd为1.99%~2.22%。加标回收率:Ag为99.30%~101.8%,Pb为98.60%~102.5%,Cd为98.40%~104.0%。方法准确、可靠、简便、快速,完全适用于高锑烟尘中银、铅、镉的测定。     

ADSORPTION BEHAVIOR OF Pb(Ⅱ) ON POTASSIUM HEXATITANATE WHISKER BY FAAS

Based on the advantage of high surface area and strong adsorption ability of potassium hexatitanate whisker, a method to determine trace Pb(Ⅱ) content by combining solid phase extraction with Flame atomic absorption spectrometry (FAAS) was established.The adsorptive behavior of potassium hexatitanate whisker to Pb(Ⅱ), primary influencing factors of adsorption and elation and effect of coexistence ions were investigated systemically.The optimal analytical conditions were discussed and examined.It was found that the adsorption rate of potassium hexatitanate whisker to Pb(Ⅱ) was 100% at pH 4.0.Pb(Ⅱ) could be elated from potassium tetratitanate whisker with HCI (2mol/L) under boiling water for 30min.The detection limit was 5.75ng/mL, and relative standard deviation was 1.66% (n=9, CPb=2.0μg/mL).     

Interference-free determination of trace levels of gold and palladium in geological and metallurgical samples by flame atomic absorption spectrometry coupled with a flow injection on-line microcolumn preconcentration and separation system

A simple and highly selective method was developed for the routine determination of trace or ultratrace amounts of gold and palladium in geological and metallurgical samples. The method uses flow injection on-line preconcentration and separation with determination by flame atomic absorption spectrometry. Au and Pd in the sample are adsorbed on a 2-mercaptopyrimidine chemically modified silica gel (MPMSG) packed microcolumn in a 0.50M HCl medium and then eluted with 0.5 or 1.0% thiourea solution. The eluates are introduced into the flame atomic absorption spectrometer directly. With the use of a 0.85 mL microcolumn (about 0.14 g MPMSG packed), the present system tolerated concentrations of common base metal ions up to 25.0 mg/mL and concentrations of anions up to 100.0 mg/mL when Au(III) at 0.100 microg/mL and Pd(II) at 0.200 microg/mL were preconcentrated for 60 s with a sample flow rate of 5.0 mL/min. The limits of detection were 3.1 ng/mL for Au(III) and 6.1 ng/mL for Pd(II) with relative standard deviations of < or = 2.5%. The analytical results obtained by the proposed method for geological and metallurgical samples were in good agreement with the certified values.     

On-line preconcentration and determination of cadmium in honey using knotted reactor coupled to flow injection-flame atomic absorption spectrometry

An on-line cadmium preconcentration and determination system implemented with flame atomic absorption spectrometry (FAAS) associated with flow injection was studied. Cadmium was retained as Cd-2-(5-bromo-2-pyridylazo)-5-diethylaminophenol Cd-(5-Br-PADAP) complex, pH 9.3. The Cd complex was removed from the knotted reactor (KR) with ethanol. A total enhancement factor of 140 was obtained with respect to FAAS (40 for KR and 3.5 due to the use of ethanol) with preconcentration time of 120 s. The detection limit value for preconcentration of 1 g sample was 0.5 ng/g. The repeatability for 10 replicate determinations at 5.0 ng/g Cd level was 3.5% relative standard deviation, calculated from peak heights obtained. The calibration graph using the preconcentration system for Cd was linear with a correlation coefficient of 0.9990 at levels near the detection limits to at least 2000 ng/g. The method was successfully applied to determination of total Cd in honey samples.     

Speciation of zinc in low molecular weight proteins of breast milk and infant formulas by size exclusion chromatography/flame atomic absorption spectroscopy.

Size exclusion chromatography (SEC) and flame atomic absorption spectroscopy (FAAS) were used for the separation of metal-containing species in milk whey. After milk ultracentrifugation, the sample was injected into a TSK-Gel G2000 glass column and eluted with 0.2M NH4NO3-NH3, pH 6.7. Low molecular weight proteins were fractionated, and the fractions were characterized by molecular weight. Zinc distributions were obtained by FAAS using a high performance nebulizer. The method was very sensitive (limit of detection = 2.6 x 10(-3) microg/mL; limit of quantitation = 8.9 x 10(-3) microg/mL) and precise (RSDs < or =10%). This method was applied to the determination of Zn in binding compounds in breast milk whey and in commercial cow's milk-based formulas. Distribution patterns were different. The presence of Zn in most fractions in breast milk was most significant, whereas in infant formulas Zn was detected only in fractions of molecular weight <5 kDa and in the highest molecular weight peak.     

Multiresidue determination of organochlorine pesticides and polychlorinated biphenyls in milk by gas chromatography with electron-capture detection after extraction by matrix solid-phase dispersion

A multiresidue analytical method based on matrix solid-phase dispersion was developed to analyze liquid milk for 22 organochlorine pesticides (OCPs) and 6 polychlorinated biphenyls (PCBs). Initial extraction is performed by loading 3 mL milk onto a 2.0 g octadecyl (C18)-bonded silica cartridge with n-hexane as the eluant. Neutral alumina column chromatography with sodium sulfate as the drying agent is used for further cleanup. The eluate is concentrated to 0.5 mL, and target analytes are determined by capillary gas chromatography with electron-capture detection. The optimized method was validated by determining accuracy (recovery percentages), precision (repeatability and reproducibility), and sensitivity (detection and quantitation limits) from analyses of milk samples fortified at 10 and 1 microg/L levels. Average recoveries were between 74 and 106% for all residues except beta-HCH, beta-endosulfan, and endosulfan sulfate. Both repeatability and reproducibility relative standard deviation values were < 22% for all residues. Detection limits ranged from 0.02 to 0.12 microg/L and quantitation limits were between 0.02 and 0.62 microg/L. The proposed analytical method may be used as a fast and simple procedure in routine determinations of OCPs and PCBs in milk.     

Analysis of submicroliter samples using micro thermospray flame furnace atomic absorption spectrometry

A recently described thermospray flame furnace atomic absorption spectrometric (TS-FF-AAS) system has been modified in order to extend the applicability of the method for the determination of elemental traces in very small sample volumes (microliter or submicroliter). As an easily available, effective thermospray vaporizer, a fused silica capillary was used and the liquid sample was transported by 1 MPa (10 bar) gas pressure delivered by a standard gas cylinder. A 0.3 microL sample volume can be analyzed with a higher power of detection than using 3 orders of magnitude larger sample volumes with conventional flame atomic absorption spectrometry. The relative standard deviations (N=12) for 0.3 microL volumes and 5 microg/mL Pb samples amount to 3.1% and 3.8% in signal height and signal area, respectively. The detection limit was found to be 69 ng/mL. Initial experiments with other elements (Cd, Hg, Tl, Zn) led to similar results.     

Generic nonextractive spectrophotometric method for determination of 4-quinolone antibiotics by formation of ion-pair complexes with beta-naphthol

This paper describes the development of a generic spontaneous nonextractive spectrophotometric method for determination of 13 pharmaceutically important 4-quinolone antibiotics. The method was based on the formation of yellow-colored water-soluble ion-pair complexes between 2% (w/v) beta-naphthol reagent and each of the studied drugs in sulfuric acid medium at room temperature. The formed ion-pair chromogens have maximum absorption peaks in the range of 365-391 nm. The concentrations of the reagents and the experimental conditions affecting the reaction were optimized. Under the optimum conditions, linear relationships with good linear coefficients (0.9987-0.9995) were found between the absorbance and concentration of the investigated drugs in the range of 10-350 microg/mL. The assay limits of detection and quantitation were 1-9.9 and 3.4-32.9 microg/mL, respectively. The precision of the method was satisfactory; the values of relative standard deviations did not exceed 2%. The proposed method was successfully applied to the analysis of the investigated drugs in pure and pharmaceutical dosage forms with good accuracy and precision; the percentages of label claim ranged from 97.8-102.8 +/- 0.35-1.60%. The results obtained by the proposed spectrophotometric method were comparable with those obtained by the official or reported methods. The proposed method is superior to all the previously reported ion-pair formation-based methods in terms of simplicity because it did not involve extraction procedures for the ion-pair complex. Therefore, this method might be recommended for routine use in quality control laboratories for analysis of the investigated 4-quinolone antibiotics in their pure forms, as well as in pharmaceutical dosage forms.     

On-line Preconcentration and Determination of Trace Metals in Water Samples by Flow Injection Combined with Flame Atomic Absorption Spectrometry via Calix[4]arene Carboxylic Acid Packed Micro-column

An adsorbent calix[4]arene carboxylic acid was employed as the adsorption material for on-line flow injection( FI) micro-column preconcentration coupled with flame atomic absorption spectrometry(FAAS) determination of trace heavy metals(Cu, Pb, Co, Ni and Cd). Parameters such as the pH, loading time and flow rate of sample, and the concentration, volume and flow rate of eluent were optimized. The enrichment factors are 50.0, 56.5, 11.6, 12.1 and 19.1 for Cu, Pb, Co, Ni, and Cd, respectively, and a sample throughput of 20 h^-1 was obtained. The limits of detection for Cu, Pb, Co, Ni, and Cd were in a range of 1.56―3.91 μg/L, and the relative standard deviations(RSDs) were less than 2.76%(n=7). Furthermore, the proposed method was successfully applied to the determination of Cu, Pb, Co, Ni, and Cd in certified reference materials and various water samples.     

FAAS法测定豫南板栗中的微量元素

采用火焰原子吸收光谱法（FAAS）对河南信阳地区产的板栗中的Cu、Fe、Zn、Ca、Mg、Mn、Cd和Pb进行了测定。结果表明,其Ca、Mg、Fe、Zn、Mn等元素的含量都比较丰富,未检出Cd和Pb。数据显示相对标准偏差为0．30％-3．92％,回收率为96．8％～102．5％,该法快速、简单,结果可靠,为进一步探讨豫南板栗的药用价值提供了理论依据。     

Ultrasensitive Voltammetric Detection of Trace Lead(II) and Cadmium(II) Using MWCNTs‐Nafion/Bismuth Composite Electrodes

Multiwall carbon nanotubes were dispersed in Nafion (MWCNTs‐NA) solution and used in combination with bismuth (MWCNTs‐NA/Bi) for fabricating composite sensors to determine trace Pb(II) and Cd(II) by differential pulse anodic stripping voltammetry (DPASV). The electrochemical properties of the MWCNTs‐NA/Bi composites film modified glassy carbon electrode (GCE) were evaluated. The synergistic effect of MWCNTs and bismuth composite film was obtained for Pb(II) and Cd(II) detection with improved sensitivity and reproducibility. Linear calibration curves ranged from 0.05 to 100 μg/L for Pb(II) and 0.08 to 100 μg/L for Cd(II). The determination limits (S/N=3) were 25 ng/L for Pb and 40 ng/L for Cd, which compared favorably with previously reported methods in the area of electrochemical Pb(II) and Cd(II) detection. The MWCNTs‐NA/Bi composite film electrodes were successfully applied to determine Pb(II) and Cd(II) in real sample, and the results of the present method agreed well with those of atomic absorption spectroscopy.     

Preparation of poly(propyleneimine) dendrimer immobilized silica gel and its application as novel microcolumn packing for the on-line FI preconcentration and separation of platinum

A G4.0 poly(propyleneimine) dendrimer immobilized silica gel (PPID-SG) was prepared with a divergent approach from gamma-aminopropyl silica gel (APSG) by repeating the reactions: 1) cyanoethylation of -NH2 and 2) reduction of -CN. Then it was successfully applied as the microcolumn packing for the on-line flow-injection (FI) preconcentration and separation and flame atomic absorption spectrometry (FAAS) determination of Pt. A limit of detection (LOD) of 0.014 microg/mL was obtained when 0.5 microg/mL Pt in chloride acid of PH = 3 was preconcentrated with a sample flow rate of 4.6 mL/min for 60s and the relative standard deviation (RSD) was 2.65%. Coexisting metal ions with concentration of 5.0 mg/mL and anion ions of 20.0 mg/ml have no interference in the determination of Pt. The proposed method was successfully applied to the determination of Pt in nickel alloy and anode slime samples.     

Determination of some trace metals in waters by flame atomic absorption spectrometry after preconcentration on Amberlite XAD-16 resin with sodium tetraborate

A method was described for the determination of the elements Cr, Mn, Fe, Co, Ni, Cu, Cd, Pb, and Bi in waters by flame atomic absorption spectrometry (FAAS) after separation and preconcentration on Amberlite XAD-16 resin with sodium tetraborate using a chromatographic column. Parameters influencing the analytical performance, including pH and the volume of sample, amount of analyte and interfering effect of co-existing ions, were studied in detail. The recovery values were quantitative (> or = 95%), and the relative standard deviation (RSD) and detection limit (DL) varied in the range of 1.1-2.4% (n=10) and 0.002-0.177 microg m(-1) (3s, n=20), respectively. After being optimized, the proposed method was applied to the drinking water, waste water and artificial sea water samples. Recovery values of the elements investigated, were quantitative for tap water and synthetic sea water, except for Mn, Co and Ni (including also Cd for synthetic sea water). Recovery values of Cd, Pb, Cu and Co were found to be 95, 102, < or = 87, and < or = 83%, respectively, for the waste water samples.     

Determination of lead and cadmium in tap water and apple leaves after preconcentration on a new acetylacetone bonded polyurethane foam sorbent

The present work describes a rapid, cost-effective analytical procedure for the determination of lead and cadmium in environmental samples by off-line preconcentration with polyurethane foam (PUF) functionalised with acetylacetone by covalent coupling through the–N=N–group. The optimum pH ranges for quantitative uptake were 5–7, 6–7 for lead and cadmium, respectively. The kinetics of metal uptake by the new foam was found to be fast, reaching equilibrium in a few minutes. Metal ions were sorbed in the minicolumn, eluted with acid solutions and determined by flame atomic absorption spectrometer (FAAS). Under the optimum conditions, the preconcentration factors obtained were 288 for Cd and 224 for Pb. The limits of detection of the proposed procedure were 0.09 and 0.07 µg L^?1 for Pb and Cd, respectively. The relative standard deviation (RSD) was less than 10%. The accuracy of the method was estimated by using environmental samples that were spiked with Cd and Pb ions. The capacity of the acetylacetone bonded PUF (AA-BPUF) sorbent at optimum conditions has been found to be 4.5, 6.9 µmol g^?1 of sorbent for Pb and Cd, respectively.     

Preconcentration and determination of lead, cadmium and nickel from water samples using a polyethylene glycol dye immobilized on poly(hydroxyethylmethacrylate) microspheres.

A simple and sensitive preconcentration analysis-atomic absorption spectrometric procedure is described for the determination of lead, cadmium and nickel. The method is based upon on-line preconcentration of metal ions on a minicolumn of Cibacron Blue F3-GA immobilized on poly(hydroxyethylmethacrylate), poly(HEMA). The enrichment factors obtained were 42 for lead, 52 for cadmium and 63 for nickel (sample volume 10 mL and sample flow rate 5 mL/min). The relative standard deviations (n = 10), in 10 mL sample solutions containing 100 microg/L Pb(2+), 10 microg/L Cd(2+) and 100 microg/L Ni(2+) were 8.9, 3.7 and 3.5%, respectively. The limits of detection (blank + 3s) (n = 10), were found to be 12.01 microg/L for Pb(2+), 1.34 microg/L for Cd(2+) and 28.73 microg/L for Ni(2+). The accuracy of the system was checked with certified and tap water samples spiked with known amounts of metal ions. No significant difference was found between the achieved results and the certified values.     

On-line pervaporation-capillary electrophoresis for the determination of volatile acidity and free sulfur dioxide in wines

Pervaporation has been coupled on-line to capillary electrophoresis (CE) by a simple interface consisting of a modified CE vial. The approach allows volatile analytes to be removed and injected into the capillary meanwhile the sample matrix remains in the pervaporator. By this approach volatile acidity and free sulfur dioxide have been simultaneously determined in wines. The detection limits (LODs) are 1.25 and 5.00 microg/mL, the quantification limits 4.12 and 16.50 microg/mL, and the linear dynamic ranges between LOD and 50 microg/mL and between 0.1 and 0.9 g/L for free sulfur dioxide and volatile acidity, respectively. The repeatability and within laboratory reproducibility, expressed as relative standard deviation (RSD), are 1.61% and 3.00% for free sulfur, and 3.35% and 4.58% for volatile acidity, respectively. The optimal pervaporation time and the time necessary for the individual separation-detection of the target analytes are 6 and 5 min, respectively. The analysis frequency is 7 h(-1) and the sample amount necessary is less than 7 mL. The proposed method and official methods for the analytes were applied to 32 wine samples. A two-tailed t-test was used to compare the methods, which yielded similar results. The errors, expressed as RSD for the two parameters, ranged between 1.3 and 4.1%.