Influence of graphene oxide incorporation and chemical cross‐linking on structure and mechanical properties of layer‐by‐layer assembled poly(Vinyl alcohol)‐Laponite free‐standing films

Functional fillers in multilayered films provide opportunity in tailoring the mechanical properties through chemical cross‐linking. In this study, Laponite‐graphene oxide co‐dispersion was used to incorporate graphene oxide (GO) easily into polyvinyl alcohol (PVA)/Laponite layer‐by‐layer (LBL) films. The LBL films were found to be uniform and the layer thickness increased linearly with number of depositions. The process was extended to a large number of depositions to investigate the macroscopic mechanical properties of the free‐standing films. The LBL films showed remarkable improvements in mechanical properties as compared to neat PVA film. The GO‐incorporated LBL films displayed higher enhancements in the tensile strength, ductility, and toughness as compared to that of PVA/Laponite LBL films, upon chemical cross‐linking. This suggests the advantageous effects of GO incorporation. Interestingly, cross‐linking of LBL films for longer time period (>1 h) and higher temperature (～80 °C) was not found to be much beneficial. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 2377–2387     

Segmental motions of poly(ethylene glycol) chains adsorbed on Laponite platelets in clay-based hydrogels: a NMR investigation

The segmental dynamics of poly(ethylene glycol) (PEG) chains adsorbed on the clay platelets within nanocomposite PEG/Laponite hydrogels was investigated over the tens of microseconds time scale, using combined solution and solid-state NMR approaches. In a first step, the time evolution of the molecular mobility displayed by the PEG chains following the addition to a Laponite aqueous dispersion was monitored during the aggregation of the clay disks and the hydrogel formation, by means of (1)H solution-state NMR. Part of the PEG repeat units were found to get strongly constrained during the gelation process. Comparisons between this time evolution of the PEG local dynamics in the PEG/Laponite/water systems and the increase of the macroscopic storage shear modulus, mainly governed by the assembling of the Laponite disks, indicate that the slowing down of the segmental motions arises from adsorbed PEG repeat units or chain portions strongly constrained between aggregated clay layers. In a second step, after completion of the gelation process, the molecular motions of the adsorbed PEG chains were probed by (1)H solid-state NMR spectroscopy. (1)H double-quantum experiments indicate that the adsorbed PEG repeat units, though reported to be frozen over a few tens of nanoseconds, still display significant reorientational motions over the tens of microseconds time scale. Using a comparison with a model system of amorphized PEG chains, the characteristic frequency of these segmental motions was found to range between 78.0 kHz and 100.7 MHz at 300 K. Interestingly, at this temperature, the level of reorientational motions detected for these adsorbed PEG chain portions was found to be as restricted as the one of bulk amorphous PEG chains, cooled at a slightly lower temperature (about 290 K).     

Laponite assisted dispersion of carbon nanotubes in water

The ability of Laponite to stabilize aqueous suspensions of multiwalled carbon nanotubes (MWCNTs) was investigated with the help of analytical centrifugation, microscopic image analysis, and measurements of electrical conductivity of hybrid Laponite+MWCNT suspensions. The impact of nanotube concentration C(n) (0.0025-0.5 wt%) and Laponite/MWCNTs ratio X (varied within 0-1 wt/wt) on the properties of Laponite+MWCNT hybrid suspensions was discussed. It was observed that sonication of MWCNTs at critical minimal concentration of Laponite X(c)≈0.25±0.05 resulted in efficient dispersion and formation of stabilized suspensions of individual nanotubes. The stabilization of nanotubes in the presence of Laponite was explained by adsorption of Laponite particles and formation of a hydrophilic charged shell on the surface of nanotubes. Increase of MWCNT concentration above the critical value resulted in percolation and formation of spatially extended electrically conductive networks of particles.     

新型非线性光学杂化材料结构与性能的研究

由硅烷染料ASD与钛酸四正丁酯在酸性条件下共水解、缩合得到杂化材料,利用透射电镜(TEM)和X射线能量色散谱仪(EDS)进行分析,结果表明,杂化溶胶粒子是由硅和钛的化合物组成的球形纳米粒子.由一维刚性取向气体模型计算杂化材料膜再极化后的二阶非线性光学系数χ⁽²⁾为1.43×10^-7esu.差示扫描量热法(DSC)测得杂化材料的玻璃化温度可达469K;用紫外-可见光谱对杂化膜在极化前后的取向及取向稳定性进行了研究.用原子力显微镜(AFM)和X射线衍射(XRD)研究了材料在极化过程中的结晶行为和微观结构对生色团取向稳定性的影响,初次在这种极化后的膜中观察到了介观结构.     

Preparation and characterization of covalently bonded PVA/Laponite/HAPI nanocomposite multilayer freestanding films by layer‐by‐layer assembly

The layer‐by‐layer (LBL) assembly technique is an attractive method to make functional multilayer thin films and has been applied to fabricate a wide range of materials. LBL materials could improve optical transmittance and mechanical properties if the film components were covalently bonded. Covalently bonded nanocomposite multilayer films were prepared by employing hydrophilic aliphatic polyisocyanate (HAPI) as the reactive component, to react with Laponite and polyvinyl alcohol (PVA). FT‐IR spectra suggested that HAPI reacted with Laponite and PVA at ambient temperature rapidly. Ellipsometry measurement showed that the film thickness was in linear growth. The influences of HAPI on the optical, mechanical and thermal properties of the films were investigated by UV‐Vis spectroscopy, tensile stress measurement, DSC and TGA. The obtained results showed that the optical transmittance and mechanical strength were enhanced when the film components were covalently bonded by HAPI. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 545–551     

Rheological Behavior and Wear Abrasion Resistance of Polyethylene Oxide/Laponite Nanocomposites

Polymer/layered silicate nanocomposite thin films were developed as clear, transparent coatings. Laponite‐S, which is a synthetic layered clay, was dispersed in a polyethylene oxide matrix and solution cast onto glass slides for further testing. Rheological properties, wear abrasion resistance, and scratch resistance were tested for each sample to examine the nanoparticle dispersion effects on the materials' properties. In this study, we identify and characterize the materials to be used, establish the appropriate conditions for the preparation of polymer/Laponite nanocomposite dispersions, illustrate methods for the development of PEO/Laponite‐S films, and characterize the films. Results on the rheological behavior of PEO‐silicate nanocomposites as a function of Laponite solids loading and PEO concentration, as well as some preliminary wear abrasion properties of the films are presented in this study.     

Nanoindentation testing of SiO<Subscript>2</Subscript>-PMMA hybrid films on acrylic substrates with variable coupling agent content

In this work we report the influence of the molar composition of the coupling agent, as well as the curing conditions on the mechanical properties of SiO₂-PMMA (polymethyl methacrylate) hybrid films deposited on organic acrylic substrates. The SiO₂-PMMA hybrid films were deposited by the sol–gel method from hybrid precursor solutions with fixed molar ratio of 1:0.25 for TEOS/MMA (Tetraethyl-orthosilicate/Methylmethacrylate) and TEOS/TMSPM (3-trimethoxysilyl propyl methacrylate) molar ratios ranging from 1:0.05 to 1:0.2. The organic compound TMSPM was used as coupling agent to enhance the bond between the organic and inorganic molecules. The wear resistance, hardness and elastic modulus of the hybrid films were determined by nanoindentation techniques and compared to the substrate mechanical behaviour. The chemical bonding in the hybrid films was analyzed by Fourier Transform Infrared spectroscopy and their transparency by optical transmission and reflection spectroscopy. The friction coefficient and sliding life of the hybrid films were also measured with a pin-on-disc tribometer. The surface morphology and roughness were determined from atomic force microscopy images. The hybrid films with lowest content of coupling agent showed the best mechanical performance in terms of hardness, friction coefficient and wear resistance keeping high optical transparency.     

高折射率有机/无机纳米杂化透明膜层材料的制备与性质研究

采用溶胶-凝胶法,将钛酸酯和硅烷偶联剂(KH-560)进行共水解,经涂膜、固化,制备了一系列含有无机二氧化钛纳米相的无机/有机杂化膜层材料,通过不同方法对杂化膜层的微结构、光学、机械和热性质进行了表征.结果表明,所得到的有机/无机纳米复合膜层,在可见光范围内的透过率均在90%以上,同时具有较好的耐热性和较高的折射率(nd=1.47~1.73),并且膜层与基材的附着性好,铅笔硬度达到4~5H.     

Evaluation of Photocatalytic Activity of Transparent Anatase Nanocrystals-Dispersed Silica Films Prepared by the Sol-Gel Process with Hot Water Treatment

Anatase nanocrystals were precipitated mainly at the surface of the silica-titania gel films with hot water treatment, whereas the addition of poly(ethylene glycol) (PEG) in the films led to the dispersion of anatase nanocrystals in the whole of the films after the treatment. Both films with and without PEG showed high photocatalytic activities for acetaldehyde, NO _x and stearic acid in the gas-solid system, and for methylene blue and potassium iodide in the liquid-solid system. The addition of PEG improved the photocatalytic activities of the resultant films due to the smaller anatase crystallites and the porous film structure. The residual silica under-layer of the superficially anatase-precipitated films is expected to act as a protective one for an organic polymer substrate against the photocatalytic degradation.     

Preparation of polymer nanocomposites with enhanced mechanical properties using hybrid of graphene and partially wrapped multi-wall carbon nanotube as nanofiller

Triblock copolymer of poly(p-dioxanone) and polyethylene glycol end-capped with pyrene moieties ((Py-PPDO)₂-b-PEG) was synthesized and used as modifier for multi-wall carbon nanotubes (MWCNTs). Nano-aggregates ((Py-PPDO)₂-b-PEG@MWCNTs) with shish-kebab like partially wrapped morphology and very good stability were obtained by incorporating the copolymer with MWCNTs. The bare MWCNT sections of (Py-PPDO)₂-b-PEG@MWCNTs were able to induce π-π interactions with graphene (GE) and resulted in a novel GE/(Py-PPDO)₂-b-PEG@MWCNTs hybrid. The dispersity of GE in solution or polymer matrix was therefore greatly improved. The PCL nanocomposite films using GE/(Py-PPDO)₂-bPEG@MWCNTs as hybrid nanofiller exhibited obviously improved mechanical properties especially at very low hybrid nanofiller content. The influence of the nanofiller content and feed ratio of GE/MWCNTs on the mechanical properties of composites films was evaluated. When the feed ratio of GE to MWCNTs is 2:8 and the total loading of nanofiller is only 0.01 wt%, the tensile strength of the composite film increased by 163% and the elongation at break increased by 17% compared to those of neat PCL. These results can be attributed to fine dispersion of the nanofillers in PCL matrix and the hybrid interactions between GE and MWCNTs. Therefore, this work provides a novel method for preparing polymer nanocomposites with high mechanical performance and low nanofiller loading.     

Laponite/聚氨酯纳米复合材料制备与性能研究

通过溶剂交换法将无机Laponite从水相转移到N,N-二甲基乙酰胺(DMAC)中,在超声波作用下,Laponite与热塑性聚氨酯(TPU)溶液进行共混复合,Laponite插层到PU分子链间而制备Laponite/聚氨酯纳米复合材料.利用TEM,AFM,TGA,DSC,DMA和静态拉伸对其结构、组成、形貌和性能进行表征,研究结果表明,Laponite优先插层到聚氨酯的硬段中,片层和硬段通过氢键相互作用和尺寸匹配性,进而形成一种插层网络结构.由于这种网络结构的存在,使Laponite/聚氨酯复合材料的强度、硬度及韧性得到同步提高.     

Double inversion of emulsions induced by salt concentration

The effects of salt on emulsions containing sorbitan oleate (Span 80) and Laponite particles were investigated. Surprisingly, a novel double phase inversion was induced by simply changing the salt concentration. At fixed concentration of Laponite particles in the aqueous phase and surfactant in paraffin oil, emulsions are oil in water (o/w) when the concentration of NaCl is lower than 5 mM. Emulsions of water in oil (w/o) are obtained when the NaCl concentration is between 5 and 20 mM. Then the emulsions invert to o/w when the salt concentration is higher than 50 mM. In this process, different emulsifiers dominate the composition of the interfacial layer, and the emulsion type is correspondingly controlled. When the salt concentration is low in the aqueous dispersion of Laponite, the particles are discrete and can move to the interface freely. Therefore, the emulsions are stabilized by particles and surfactant, and the type is o/w as particles are in domination. At intermediate salt concentrations, the aqueous dispersions of Laponite are gel-like, the viscosity is high, and the transition of the particles from the aqueous phase to the interface is inhibited. The emulsions are stabilized mainly by lipophilic surfactant, and w/o emulsions are obtained. For high salt concentration, flocculation occurs and the viscosity of the dispersion is reduced; thus, the adsorption of particles is promoted and the type of emulsions inverts to o/w. Laser-induced fluorescent confocal micrographs and cryo transmission electron microscopy clearly confirm the adsorption of Laponite particles on the surface of o/w emulsion droplets, whereas the accumulation of particles at the w/o emulsion droplet surfaces was not observed. This mechanism is also supported by the results of rheology and interfacial tension measurements.     

Unusual inorganic phase formation in ultraviolet‐curable organic–inorganic hybrid films

Inorganic–organic hybrid materials were prepared with a cycloaliphatic epoxide adduct of linseed oil with tetraethylorthosilicate (TEOS) oligomers via a cationic UV‐curing process. The TEOS oligomers were prepared in the presence of water and ethanol with hydrochloric acid as a catalyst. The TEOS oligomers were characterized with ¹H and ²⁹Si NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. Hybrid films were cured, and the dynamic mechanical and thermal properties of the hybrid films were evaluated as a function of the TEOS oligomer content. The morphology of the hybrid films was examined with atomic force microscopy, transmission electron microscopy, and small‐angle light scattering. The microscopy and dynamic mechanical data indicated that the hybrid films were heterogeneous materials with various inorganic particle sizes dispersed within the organic matrix. In addition, ²⁹Si solid‐state NMR spectroscopy was used to investigate the coupling between the silicate region and organic regions. A schematic model is proposed to address structural features of hybrid materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1607–1623, 2005     

溶胶-凝胶法制备二氧化钛纳米粒子及在光固化体系中的稳定分散

选用3种不同的稳定剂,乙酰丙酮(acac),异丙氧基三(焦磷酸二辛酯)钛(TTPO)和可聚合有机磷酸酯(MAP),采用钛酸四正丁酯(TBT)通过溶胶-凝胶法合成了一系列二氧化钛溶胶,并与树脂/单体相混合,制备成有机-无机杂化光固化涂料.利用FT-IR监测了TBT水解缩合形成溶胶的过程及杂化体系的光聚合过程.杂化固化膜SEM结果显示,在合成溶胶过程中添加不同的稳定剂对杂化固化膜中无机粒子粒径尺寸等形态有显著影响,其中使用TTPO作为稳定剂得到的无机粒子分散最均匀,粒径最小,约20 nm.物理性能测试表明光固化杂化膜在硬度和柔韧性方面都有明显的改善.     

Composites of hydrophilic polymers and organic nanocrystals enable enhanced robustness

We describe a new family of composite materials, polymer/organic nanocrystal (ONC) hybrids. These were prepared from soluble ONCs based on perylene diimides (PDI) and water‐soluble polymers (sodium alginate and polyvinyl alcohol). Polymer/ONC films were characterized by optical spectroscopy, electron microscopy, and tensile strength studies. The films show enhanced chemical and mechanical stability due to synergy between the constituents. The hybrid films are stable in both water and organic solvents, unlike the individual components. The ONCs we employed possess nonlinear optical activity (second harmonic generation, SHG); they showed improved photostability (stable SHG under laser light) in the hybrids. Tensile strength enhancement (as high as twofold in the film having just 2.4% ONCs by weight) was observed as revealed by mechanical measurements. Hybrids with aligned ONCs were also prepared using simple extrusion via syringe needle followed by gelation. Employing ONCs in polymeric hybrid materials enables facile fabrication in aqueous media, synergy, chemical, mechanical, and photostability as well as useful photofunction (SHG), introducing a versatile class of composite materials.     

Study on luminescence characteristic of the ZnO/polymer hybrid films

The cyclohexane solution of PS (polystyrene) and the ethyl acetate solution of PMMA (polymethyl methacrylate) were used as flowing liquid; the ZnO/polymer hybrid colloids were successively produced by focused pulsed laser ablation of ZnO target in interface of solid and flowing liquid. As solvent in the hybrid colloids has volatized, the ZnO/polymer hybrid films were obtained. The hybrid colloids were characterized by high-resolution transmission electron microscopy (HRTEM) and select-area electron diffraction (SEAD). The results show a good dispersion of the ZnO nanoparticles in the polymer matrix. The hybrid films were characterized by fluorescence spectrum, Fourier transform infrared spectroscopy (FTIR) spectroscopy, thermogravimetry with FTIR (TG/FTIR), and X-ray photoelectron spectrum. The results show the ZnO/polymer hybrid films can radiate strong blue light under ultraviolet. Meanwhile, the ZnO/polymer hybrid films have higher chemical stability than ZnO nanoparticles because nano-ZnO nanoparticles were enwrapped by polymers. In addition, the ZnO hybrid films have higher thermal stability then the related pure polymers because of strong interaction among ZnO nanoparticles and polymers.     

Synthesis,characterization, and proton‐conducting properties of organic–inorganic hybrid membranes based on polysiloxane zwitterionomer

The synthesis and characterization of a series of zwitterionic hybrid membranes based on a zwitterionic siloxane precursor (ZS) are described. Flexible, transparent, optically homogeneous films were prepared. With the further incorporation of poly(ethylene glycol) (PEG), the hybrid films became more flexible but translucent. The structure of the inorganic sides was probed with solid‐state ²⁹Si NMR spectroscopy, and the organic sides and the chemical process involved were characterized with solid‐state ¹³C cross‐polarization/magic‐angle spinning NMR. A higher content of ZS led to higher proton conductivity of the hybrid electrolytes. Moreover, the proton conductivity was enhanced by the addition of the plasticizing component of PEG to the hybrid matrix; this was ascribed to the increased water uptake and free volume of the hybrid matrix and the dissociation of sulfonic acid groups. The proton conductivity of these hybrid membranes could be increased up to 3.5 × 10^?2 S/cm by the temperature and relative humidity being increased to 85 °C and 95%, respectively. The proton‐conduction behavior of these hybrid membranes is also briefly discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3444–3453, 2006     

Mechanically controlled, morphologically determined sol–gel derived UV curable hybrid nanocomposites: SAXS and DMTA studies

This work reports preparation of organic–inorganic hybrid materials by sol–gel method. To this end, UV cured urethane acrylate and different functional monomers were used as organic network together with tetraethyl orthosilicate (TEOS) as inorganic network former and 3-methacryloxy propyltrimethoxy silane (MEMO) as network modifier. The effect of sol–gel precursor’s ratio on morphological properties of hybrid network was studied by small angle X-ray scattering (SAXS). Dynamic mechanical thermal analysis (DMTA) was performed to investigate the mechanical behavior of hybrid films. Whilst hybrids with low content of TEOS and high amounts of MEMO represented a “structural defect”, it was found that by increasing TEOS/MEMO ratio, the silica domain size decreased, showing a mass fractal behavior. This was attributed to a more compact structure of silica and a stronger hybrid network. The changes observed in compactness of hybrid films directly affected the glass transition temperature. By increasing the inorganic phase, more restriction in segmental motion of the polymeric phase occurred. Upon increasing TEOS/MEMO ratio a broader tan δ peak deduced from DMTA graphs was observed, indicating greater phase separation and higher heterogeneity.     

The influence of UV light on collagen/poly(ethylene glycol) blends

The photodegradation behaviour of the collagen and poly(ethylene glycol) PEG blends has been studied by Fourier transform infrared spectroscopy (FTIR), UV-Vis spectroscopy and viscometry. Surface properties before and after UV irradiation were observed using optical microscope.Collagen and PEG were immiscible and the films obtained from the mixture were fragile with poor mechanical properties. The photochemical stability of the collagen and PEG blend was different from that of the single components. In general collagen/PEG blends are less stable under UV irradiation than pure collagen. The influence of PEG on the photochemical stability of collagen depends on its concentration in the blend. Microscope photographs showed that the surface characteristics of collagen and collagen/PEG blends in film form are not drastically altered after UV irradiation.     

Cellulose Nanocrystal-Assisted Dispersion of Luminescent Single-Walled Carbon Nanotubes for Layer-by-Layer Assembled Hybrid Thin Films

Highly stable single-walled carbon nanotube (SWNT) dispersions are obtained after ultrasonication in cellulose nanocrystal (CN) aqueous colloidal suspensions. Mild dispersion conditions were applied to preserve the SWNT length in order to facilitate the identification of hybrid objects. This led to a moderate dispersion of 24% of the SWNTs. Under these conditions, atomic force microscopy (AFM) and transmission electron microscopy (TEM) experiments succeeded in demonstrating the formation of hybrid particles in which CNs are aligned along the nanotube axis by a self-assembly process. These SWNT/CN dispersions are used to create multilayered thin films with the layer-by-layer method using polyallylamine hydrochloride as a polyelectrolyte. Homogeneous films from one to eight bilayers are obtained with an average bilayer thickness of 17 nm. The presence of SWNTs in each bilayer is attested to by characteristic Raman signals. It should be noted that these films exhibit a near-infrared luminescence signal due to isolated and well-separated nanotubes. Furthermore, scanning electron microscopy (SEM) suggests that the SWNT network is percolating through the film.