Isomeric forms of heavier main group hydrides: experimental and theoretical studies of the [Sn(Ar)H]2 (Ar = terphenyl) system

A series of symmetric divalent Sn(II) hydrides of the general form [(4-X-Ar')Sn(mu-H)]2 (4-X-Ar' = C6H2-4-X-2,6-(C6H3-2,6-iPr2)2; X = H, MeO, tBu, and SiMe3; 2, 6, 10, and 14), along with the more hindered asymmetric tin hydride (3,5-iPr2-Ar*)SnSn(H)2(3,5-iPr2-Ar*) (16) (3,5-iPr2-Ar* = 3,5-iPr2-C6H-2,6-(C6H2-2,4,6-iPr3)2), have been isolated and characterized. They were prepared either by direct reduction of the corresponding aryltin(II) chloride precursors, ArSnCl, with LiBH4 or iBu2AlH (DIBAL), or via a transmetallation reaction between an aryltin(II) amide, ArSnNMe2, and BH3.THF. Compounds 2, 6, 10, and 14 were obtained as orange solids and have centrosymmetric dimeric structures in the solid state with long Sn...Sn separations of 3.05 to 3.13 A. The more hindered tin(II) hydride 16 crystallized as a deep-blue solid with an unusual, formally mixed-valent structure wherein a long Sn-Sn bond is present [Sn-Sn = 2.9157(10) A] and two hydrogen atoms are bound to one of the tin atoms. The Sn-H hydrogen atoms in 16 could not be located by X-ray crystallography, but complementary M?ssbauer studies established the presence of divalent and tetravalent tin centers in 16. Spectroscopic studies (IR, UV-vis, and NMR) show that, in solution, compounds 2, 6, 10, and 14 are predominantly dimeric with Sn-H-Sn bridges. In contrast, the more hindered hydrides 16 and previously reported (Ar*SnH)2 (17) (Ar* = C6H3-2,6-(C6H2-2,4,6-iPr3)2) adopt primarily the unsymmetric structure ArSnSn(H)2Ar in solution. Detailed theoretical calculations have been performed which include calculated UV-vis and IR spectra of various possible isomers of the reported hydrides and relevant model species. These showed that increased steric hindrance favors the asymmetric form ArSnSn(H)2Ar relative to the centrosymmetric isomer [ArSn(mu-H)]2 as a result of the widening of the interligand angles at tin, which lowers steric repulsion between the terphenyl ligands.     

Synthesis, structures, and kinetics of mixed-donor amido-amino-siloxo ligands from symmetrical diamidosilyl ether ligands via a retro-brook rearrangement

Deprotonation of the new (R = propyl, 3,5-Me(2)Ph) and previously prepared (R = 2,4,6-Me(3)Ph, 2,6-(i)Pr(2)Ph, 3,5-(CF(3))(2)Ph) symmetrical diamidosilyl ether ligand precursors {[RNHSiMe(2)](2)O} with 2 equiv of nBuLi in THF resulted in a new class of mixed-donor amido-amino-siloxo ligands of the form {RNLiSiMe(2)N(R)SiMe(2)OLi} (R= propyl (1c), 3,5-Me(2)Ph (2c), 2,4,6-Me(3)Ph (3c), 2,6-(i)Pr(2)Ph (4c), 3,5-(CF(3))(2)Ph (5c)) in one-step and high yield via a retro-Brook-type rearrangement mechanism. Ligands 1c, 3c, and 4c have been structurally characterized in the presence and absence of THF/ether donor solvents and exhibited a range of aggregated structures with ring-laddering, ring-stacking, and cubane motifs; higher-nuclearity clusters for base-free systems were observed for 1c and 4c. 1H, (7)Li, and selected (13)C{(1)H} NMR spectra in THF-d(8) and toluene-d(8) are described; the (7)Li data are indicative of intramolecular fluxional behavior as a function of temperature but do not shed light on the nuclearity of the salts in solution. Reaction kinetics were investigated by variable-temperature 1H NMR spectroscopy and showed that the rate of rearrangement reactions increases with decreasing steric hindrance and with increasing electron-donating ability of the R substituents, with tau(1/2) values ranging from 5.7 x 10(1) to 1.5 x 10(8) s for 2c and 5c, respectively.     

An arene-stabilized cobalt(I) aryl: reactions with CO and NO

The half-sandwich cobalt(I) complex (eta (6)-C 7H 8)CoAr*-3,5- ( i )Pr 2 (Ar*-3,5- ( i )Pr 2 = -C 6H-2,6-(C 6H 2-2,4,6- ( i )Pr 3) 2-3,5- ( i )Pr 2) was synthesized by reduction of [3,5- ( i )Pr 2Ar*Co(mu-Cl)] 2 in toluene. It reacts with CO or NO to afford the unusual complexes [3,5- ( i )Pr 2Ar*C(O)Co(CO)] or [3,5- ( i )Pr 2Ar*N(NO)OCo(NO) 2].     

Univalent transition metal complexes of arenes stabilized by a bulky terphenyl ligand: differences in the stability of Cr(I), Mn(I) or Fe(I) complexes

Two univalent transition metal complexes, (micro-eta6:eta6-C7H8){MnAr*-3,5-Pri2}2 () and (eta6-C6H6)FeAr*-3,5-Pri2 () (Ar*-3,5-Pri2=C6H-2,6-(C6H(2)-2,4,6-Pri3)(2)-3,5-Pri2), that have eta6 arene coordination were synthesized by reduction of the corresponding metal halides. The complexes are thermally stable in contrast to the corresponding Cri complexes of benzene or toluene which decompose at room temperature.     

Borane-mediated silylation of a metal-oxo ligand

The addition of 1 equiv of HSiPh(3) to UO(2)((Ar)acnac)(2) ((Ar)acnac = ArNC(Ph)CHC(Ph)O; Ar = 3,5-(t)Bu(2)C(6)H(3)), in the presence of 1 equiv of B(C(6)F(5))(3), results in the formation of U(OSiPh(3))(OB{C(6)F(5)}(3))((Ar)acnac)(2) (1), via silylation of an oxo ligand and reduction of the uranium center. The addition of 1 equiv of Cp(2)Co to 1 results in a reduction to uranium(IV) and the formation of [Cp(2)Co][U(OSiPh(3))(OB{C(6)F(5)}(3))((Ar)acnac)(2)] (2) in 78% yield. Complexes 1 and 2 have been characterized by X-ray crystallography, while the solution-phase redox properties of 1 have been measured with cyclic voltammetry.     

The niobaziridine-hydride functional group: synthesis and divergent reactivity

A multistep synthetic strategy enables the isolation of the niobaziridine-hydride complex Nb(H)(eta2-tBu(H)C=NAr)(N[Np]Ar)2 (1, Np = neopentyl, Ar = 3,5-C6H3Me2), which functions as a reactive synthon for its tautomer, the three-coordinate, trisamide species Nb(N[Np]Ar)3 (2). Treatment of 1 with various small molecules has demonstrated its capacity to effect two-electron reduction chemistry. Most noteworthy is the reaction between 1 and elemental phosphorus (P4), providing in high yield the bridging diphosphide complex (mu2:eta2,eta2-P2)[Nb(N[Np]Ar)3]2. However, unsaturated organic functionality including nitriles and aldehydes can insert into the Nb-H bond of 1, leaving the niobaziridine ring intact, thus demonstrating that dual pathways of reactivity are available to the niobaziridine-hydride functional group.     

Syntheses, structures, and reactivities of mono- and dinuclear iridium thiolato complexes containing nitrosyl ligands

Reactions of the iridium(III) nitrosyl complex [Ir(NO)Cl2(PPh3)2] (1) with hydrosulfide and arenethiolate anions afforded the square-pyramidal iridium(III) complex [Ir(NO)(SH)2(PPh3)2] (2) with a bent nitrosyl ligand and a series of the square-planar iridium(I) complexes [Ir(NO)(SAr)2(PPh3)] (3a, Ar = C6H2Me3-2,4,6 (Mes); 3b, Ar = C6H3Me2-2,6 (Xy); 3c, Ar = C6H2Pri3-2,4,6) containing a linear nitrosyl ligand, respectively. Complex 1 also reacted with alkanethiolate anions or alkanethiols to give the thiolato-bridged diiridium complexes [Ir(NO)(mu-SPri)(SPri)(PPh3)]2 (4) and [Ir(NO)(mu-SBut)(PPh3)]2 (5). Complex 4 contains two square-pyramidal iridium(III) centers with a bent nitrosyl ligand, whereas 5 contains two tetrahedral iridium(0) centers with a linear nitrosyl ligand and has an Ir-Ir bond. Upon treatment with benzoyl chloride, 3a and 3b were converted into the (diaryl disulfide)- and thiolato-bridged dichlorodiiridium(III) complexes [[IrCl(mu-SC6HnMe4-nCH2)(PPh3)]2(mu-ArSSAr)] (6a, Ar = Mes, n = 2; 6b, Ar = Xy, n = 3) accompanied by a loss of the nitrosyl ligands and cleavage of a C-H bond in an ortho methyl group of the thiolato ligands. Similar treatment of 4 gave the dichlorodiiridium complex [Ir(NO)(PPh3)(mu-SPri)3IrCl2(PPh3)] (7), which has an octahedral dichloroiridium(III) center and a distorted trigonal-bipyramidal Ir(I) atom with a linear nitrosyl ligand. The detailed structures of 3a, 4, 5, 6a, and 7 have been determined by X-ray crystallography.     

Bi- or trinuclear 2-iodobenzoate complexes of Znii: crystal structures and luminescence

Reactions of zinc nitrate with 2-iodobenzoic acid (2-IBA) and different pyridines result in binuclear Znⁱⁱ carboxylate complexes [Zn₂(2-IBA)₄L₂], where L = Py, 3-MePy and 3,5-Me₂Py, while in the case of 2,4,6-Me₃Py, trinuclear (2,4,6-Me₃PyH)₂[Zn₃(2-IBA)₆(OH)₂] is formed.     

Kinetics of chemical oxidative dispersion polymerization of 3,5‐xylidine in aqueous medium using a PH stat method

Kinetics of chemical oxidative dispersion polymerization of 3,5‐xylidine (Xy) in aqueous medium with ammonium persulfate (APS) as an oxidant was studied by monitoring the amount of proton released from Xy monomer, which was obtained from the amount of potassium hydroxide (KOH) solution added to keep constant pH values using a pH stat. The initial polymerization rate (R) [mol/L/min] of Xy was expressed as follows: R = 1.65 (1 − α) [Xy] [APS], where α is the degree of ionization of Xy, and [Xy] and [APS] are concentrations of Xy and APS, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4238–4246, 2000     

Ligand rotation in [Ar(R)N]3M-N2-M'[N(R)Ar]3(M, M' = MoIII, NbIII; R = iPr and tBu) dimers

Earlier calculations on the model N2-bridged dimer (micro-N2)-{Mo[NH2]3}2 revealed that ligand rotation away from a trigonal arrangement around the metal centres was energetically favourable resulting in a reversal of the singlet and triplet energies such that the singlet state was stabilized 13 kJ mol(-1) below the D(3d) triplet structure. These calculations, however, ignored the steric bulk of the amide ligands N(R)Ar (R =iPr and tBu, Ar = 3,5-C6H3Me2) which may prevent or limit the extent of ligand rotation. In order to investigate the consequences of steric crowding, density functional calculations using QM/MM techniques have been performed on the Mo(III)Mo(III) and Mo(III)Nb(III) intermediate dimer complexes (mu-N(2))-{Mo[N(R)Ar]3}2 and [Ar(R)N]3Mo-(mu-N2)-Nb[N(R)Ar]3 formed when three-coordinate Mo[N(R)Ar]3 and Nb[N(R)Ar]3 react with dinitrogen. The calculations indicate that ligand rotation away from a trigonal arrangement is energetically favourable for all of the ligands investigated and that the distortion is largely electronic in origin. However, the steric constraints of the bulky amide groups do play a role in determining the final orientation of the ligands, in particular, whether the ligands are rotated at one or both metal centres of the dimer. Analogous to the model system, QM/MM calculations predict a singlet ground state for the (mu-N2)-{Mo[N(R)Ar]3}2 dimers, a result which is seemingly at odds with the experimental triplet ground state found for the related (mu-N2)-{Mo[N(tBu)Ph]3}2 system. However, QM/MM calculations on the (mu-N2)-{Mo[N(tBu)Ph]3}2 dimer reveal that the singlet-triplet gap is nearly 20 kJ mol(-1) smaller and therefore this complex is expected to exhibit very different magnetic behaviour to the (mu-N2)-{Mo[N(R)Ar]3}2 system.     

Syntheses, reactions, and ethylene polymerization of titanium complexes with [N,N,S] ligands

Tridentate dianionic arylsulfide free ligands [ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (3a); Ar = 2,4,6-trimethylphenyl (3b); Ar = 2,6-diisopropylphenyl (3c)) have been prepared by reduction of the corresponding imine compounds [ArN[double bond, length as m-dash]CHC(6)H(4)NHC(6)H(4)-2-SPh] (Ar = Ph (2a); Ar = 2,4,6-trimethylphenyl (2b); Ar = 2,6-diisopropylphenyl (2c)) with LiAlH(4) in high yields. Reactions of TiCl(4) with the tridentate dianionic arylsulfide free ligands (3a-3c) afford five-coordinate and four-coordinate titanium complexes [κS, κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = Ph (4a); Ar = 2,4,6-trimethylphenyl (4b)] and [κ(2)N-(ArNHCH(2)C(6)H(4)NHC(6)H(4)-2-SPh)TiCl(2)] (Ar = 2,6-diisopropylphenyl (4c)], respectively. The molecular structures of compounds 2b, 2c, 3b and 3c·HCl have been characterized by single crystal X-ray diffraction analyses. Complexes 2a-4c are characterized by IR,(1)H-NMR spectra, and elemental analysis. EXAFS spectroscopy performed on complexes 4b and 4c reveals the expected different coordination geometry due to steric hindrance effect. When activated by excess methylaluminoxane (MAO), 4a-4c can be used as catalysts for ethylene polymerization and exhibit moderate to good activities.     

Selective homo- and heterodehydrocouplings of phosphines catalyzed by rhodium phosphido complexes

Reactions of the rhodium complex (dippe)Rh(eta3-CH2Ph) (1, dippe = iPr2PCH2CH2PiPr2) with ArPH2 (Ar = Ph, Mes) proceed via P-H oxidative additions to the phosphido complexes (dippe)Rh(mu-PHAr)2Rh(dippe) (3a, Ar = Ph; 3b, Ar = Mes). The corresponding reaction of Ph2PH occurs similarly, via the intermediate (dippe)Rh(PPh2)PHPh2 (4), to (dippe)Rh(mu-PPh2)2Rh(dippe) (3c). Complexes 3a-c and 4 are catalysts for the catalytic dehydrodimerizations of the corresponding phosphines to diphosphanes. Complex 1 is a more active dehydrocoupling catalyst, and substituent effects suggest that the active catalyst is mononuclear. Efficient dehydrocouplings of 2-EtC6H4PH2, 2-iPrC6H4PH2, and 2,4,6-iPr3C6H2PH2 were also observed. Complex 1 also catalyzes the heterocoupling of Ph2PH with PhSH (to Ph2P-SPh), and stoichiometric reactions in this system allowed isolation of (dippe)Rh(mu-SPh)2Rh(dippe) (6) and (dippe)Rh(SPh)PHR2 (7a, R2PH = MesPH2; 7b, R2PH = Ph2PH).     

Substituent effects in formally quintuple-bonded ArCrCrAr compounds (Ar = terphenyl) and related species

The effects of different terphenyl ligand substituents on the quintuple Cr-Cr bonding in arylchromium(I) dimers stabilized by bulky terphenyl ligands (Ar) were investigated. A series of complexes, ArCrCrAr (1-4; Ar = C6H2-2,6-(C6H3-2,6-iPr2)2-4-X, where X = H, SiMe3, OMe, and F), was synthesized and structurally characterized. Their X-ray crystal structures display similar trans-bent C(ipso)CrCrC(ipso) cores with short Cr-Cr distances that range from 1.8077(7) to 1.8351(4) A. There also weaker Cr-C interactions [2.294(1)-2.322(2) A] involving an C(ipso) of one of the flanking aryl rings. The data show that the changes induced in the Cr-Cr bond length by the different substituents X in the para positions of the central aryl ring of the terphenyl ligand are probably a result of packing rather than electronic effects. This is in agreement with density functional theory (DFT) calculations, which predict that the model compounds (4-XC6H4)CrCr(C6H4-4-X) (X = H, SiMe3, OMe, and F) have similar geometries in the gas phase. Magnetic measurements in the temperature range of 2-300 K revealed temperature-independent paramagnetism in 1-4. UV-visible and NMR spectroscopic data indicated that the metal-metal-bonded solid-state structures of 1-4 are retained in solution. Reduction of (4-F3CAr')CrCl (4-F3CAr' = C6H2-2,6-(C6H3-2,6-iPr2)2-4-CF3) with KC8 gave non-Cr-Cr-bonded fluorine-bridged dimer {(4-F3CAr')Cr(mu-F)(THF)}2 (5) as a result of activation of the CF3 moiety. The monomeric, two-coordinate complexes [(3,5-iPr2Ar*)Cr(L)] (6, L = THF; 7, L = PMe3; 3,5-iPr2Ar* = C6H1-2,6-(C6H-2,4,6-iPr3)2-3,5-iPr2) were obtained with use of the larger 3,5-Pri2-Ar* ligand, which prevents Cr-Cr bond formation. Their structures contain almost linearly coordinated CrI atoms, with high-spin 3d5 configurations. The addition of toluene to a mixture of (3,5-iPr2Ar*)CrCl and KC8 gave the unusual dinuclear benzyl complex [(3,5-iPr2Ar*)Cr(eta3:eta6-CH2Ph)Cr(Ar*-1-H-3,5-iPr2)] (8), in which a C-H bond from a toluene methyl group was activated. The electronic structures of 5-8 have been analyzed with the aid of DFT calculations.     

Designing multifunctional expanded pyridiniums: properties of branched and fused head-to-tail bipyridiniums

The multifaceted potentialities of expanded pyridiniums (EPs), based on one pyridinium core bearing a 4-pyridyl or 4-pyridylium as the N-pyridinio group, are established at both experimental and theoretical levels. Two classes of head-to-tail (htt) EPs were designed, and their first representative elements were synthesized and fully characterized. The branched (B) family is made up of 2,6-diphenyl-4-aryl-1,4'-bipyridin-1-ium (or 1,1'-diium) species, denoted 1B and 2B for monocationic EPs (with aryl = phenyl and biphenyl, respectively) and 1B(Me) and 2B(Me) for related quaternarized dicationic species. The series of fused (F) analogues comprises 9-aryl-benzo[c]benzo[1,2]quinolizino[3,4,5,6-ija][1,6]naphthyridin-15-ium species, denoted 1F and 2F, and their 2,15-diium derivatives referred to as 1F(Me) and 2F(Me). Electrochemistry (in MeCN vs SCE) reveals that branched EPs undergo a single reversible bielectronic reduction at ca. -0.92 V for 1B/2B and -0.59 V for 1B(Me)/2B(Me), whereas pericondensed species show two reversible monoelectronic reductions at ca. -0.83 and -1.59 V for 1F/2F and ca. -0.42 and -1.07 V for 1F(Me)/2F(Me). Regarding electronic absorption features, all htt-EP chromophores show absorptivity in the range of ca. 1-4 × 10(4) M(-1) cm(-1), with red-edge absorptions extending toward 450 and 500 nm (in MeCN) for 2B(Me) and 2F(Me), respectively. These lowest-energy pi-pi* transitions are ascribed to intramolecular charge transfer between the electron-releasing biphenyl group and the htt-bipyridinium electron-withdrawing subsystems. EPs display room-temperature photoemission quantum yields ranging from 10% to 50%, with the exception of 1B, and branched luminophores are characterized by larger Stokes shifts (8000-10?000 cm(-1)) than fused ones. Lastly, a method to predict the efficiency of photobiscyclization of branched EPs into fused ones, based on the analysis of computed difference maps in total electron density for singlet excited states, is proposed.     

Electron-Deficient Borinic Acid Polymers: Synthesis,Supramolecular Assembly,and Examination as Catalysts in Amide Bond Formation

The Lewis acidic character of borinic-acid-functionalized polymers suggests broad potential applications in supramolecular materials, chemo- and biosensors, as well as supported catalysts. Two highly electron-deficient borinic acid copolymers ( 3 a and 3 b ) with variable steric hindrance at the boron center were prepared by reaction of aryldibromoboranes ArBBr₂ ( 2 , Ar=2,4-Cl₂Ph, 3,5-Cl₂Ph) with a 10 % stannylated polystyrene random copolymer, followed by conversion to the desired PS-B(Ar)OH functionalities. The supramolecular assembly of these polymers through Lewis acid–Lewis base interactions and reversible covalent B−O−B bond formation was investigated. Exposure of a polymer solution of 3 a to pyridine triggered spontaneous gelation, whereas 3 b only gelled upon addition of molecular sieves to favor formation of boroxane crosslinks. The crosslinking process was readily reversed by addition of small amounts of water or wet solvent. The dynamic processes were studied in detail by variable-temperature (VT) NMR by using molecular model compounds. The polymers and their corresponding model compounds were also examined as catalysts in the amide bond formation reaction between phenylacetic acid and benzylamine. The 3,5-dichlorophenyl borinic acid derivatives proved to be the more effective catalysts. Mechanistic studies suggested that the borane Lewis acid-catalyzed coupling involves initial acid-induced protodeboronation to release the dichlorophenyl boronic acid as the active catalyst.     

Molecular structure of 2,4,6-tris(di-tert-butyl-4-hydroxybenzyl)resorcinol in the crystal and in solution, according to IR data

2,4,6-Tris(3,5-di-tert-butyl-4-hydroxybenzyl)resorcinol in the crystal and in solution has a similar steric structure, favorable for its performance as peroxyl radical scavenger.     

Electronic response of a (P,N)-based ligand on metal coordination

The reaction of [(THF)Li(Ph(2)PC(H)Py)] with ZnCl(2) in the presence of ZnO yields the zinc complex [Zn(3)(Ph(2)PC(H)Py)(4)O] (1). Deprotonation of the phosphane Ph(2)P(CH(2)Py) with [Fe(N(SiMe(3))(2))2] gives the iron complexes [(Ph(2)P(CH(2)Py))Fe(Ph(2)PC(H)Py)2] (2) and [Fe(Ph(2)PC(H)Py)(N(SiMe(3))(2))]2 (3), depending on the ratio of phosphane. The solid state structures of the metal complexes illustrate the coordination flexibility of the [Ph(2)C(H)Py](-)-anion. Depending on the electronic requirements of the coordinated metal the anion acts as a (P,N)-chelating amide or C-coordinating carbanion with the P- and N-heteroatoms as donor bases.     

手性SalenZn配合物的合成及对咪唑类、吡啶类客体的分子识别研究

合成并表征了手性Salen配体1及其Zn配合物2。详细讨论了配体及配合物的电 子光谱和圆二色光谱性质。用紫外—可见光谱滴定法测定了主体2与4种咪唑、5种 吡啶客体轴向配位反应的平衡常数，研究了主体分子2的分子识别行为。实验结果 表明：各种客体的缔合常数，咪吡类按K(Im)＞K(2—MeIm)＞K(SMIm)＞K(EMIm)顺 序递减;吡啶类按K(Py)＞K(3-Py)＞K(3，5-Py)＞K(2，4—Py)＞K(2，4，6—Py)顺 序递减。测定了识别过程的△rGm^-,△rHm^-,△rSm^-，发现该反应是放热、熵减 小的过程。采用分子力学的方法考察了主客体的最低能量构象，并对该构象进行量 子化学计算，从理论上对实验事实给予较好的解释。     

Synthesis of molybdenum complexes that contain "hybrid" triamidoamine ligands, [(hexaisopropylterphenyl-NCH2CH2)2NCH2CH2N-aryl]3-, and studies relevant to catalytic reduction of dinitrogen

In the Buchwald-Hartwig reaction between HIPTBr (HIPT = 3,5-(2,4,6-i-Pr3C6H2)2C6H3 = hexaisopropylterphenyl) and (H2NCH2CH2)3N, it is possible to obtain a 65% isolated yield of (HIPTNHCH2CH2)2NCH2CH2NH2. A second coupling then can be carried out to yield a variety of "hybrid" ligands, (HIPTNHCH2CH2)2NCH2CH2NHAr, where Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, 3,5-(MeO)2C6H3, 3,5-Me2NC5H3, 3,5-Ph2NC5H3, 2,4,6-i-Pr3C6H2, or 2,4,6-Me3C6H2. The hybrid ligands may be attached to Mo to yield [hybrid]MoCl species. From the monochloride species, a variety of other species such as [hybrid]MoN, {[hybrid]MoN2}Na, and {[hybrid]Mo(NH3)}+ can be prepared. [Hybrid]MoN2 species were prepared through oxidation of {[hybrid]MoN2}Na species with ZnCl2, but they could not be isolated. [Hybrid]Mo=N-NH species could be observed as a consequence of the protonation of {[hybrid]MoN2}- species, but they too could not be isolated as a consequence of a facile decomposition to yield dihydrogen and [hybrid]MoN2 species. Attempts to reduce dinitrogen catalytically led to little or no ammonia being formed from dinitrogen. The fact that no ammonia was formed from dinitrogen in the case of Ar = 3,5-Me2C6H3, 3,5-(CF3)2C6H3, or 3,5-(MeO)2C6H3 could be attributed to a rapid decomposition of intermediate [hybrid]Mo=N-NH species in the catalytic reaction, a decomposition that was shown in separate studies to be accelerated dramatically by 2,6-lutidine, the conjugate base of the acid employed in the attempted catalytic reduction. X-ray structures of [(HIPTNHCH2CH2)2NCH2CH2N{3,5-(CF3)2C6H3}]MoCl and [(HIPTNHCH2CH2)2NCH2CH2N(3,5-Me2C6H3)]MoN2}Na(THF)2 are reported.     

Birch reduction of hexaphenyl- and pentaphenylbenzene and an X-ray crystallography and NMR spectroscopy study of cis- and epi-1,2,3,4,5,6-hexaphenylcyclohexane and of 2,3,5,6-tetraphenyl-1,1'-bicyclohexylidene: Cannizzaro's conundrum revisited

The Birch reduction of hexaphenylbenzene yields two isomers of 1,2,3,4,5,6-hexaphenylcyclohexane. The X-ray crystal structure of the all-cis isomer, 1, reveals that the severe steric crowding among the three axial phenyls is alleviated by a marked splaying out of those three aryl substituents relative to the positioning in a conventional chair structure. A second product, 2, was identified crystallographically and by NMR spectroscopy as the 1,3-diaxial-2,4,5,6-tetraequatorial (epi) isomer of hexaphenylcyclohexane, in which only five of the six additional hydrogen atoms are positioned on the same face of the C(6)Ph(6) precursor. A variable-temperature NMR study of the all-cis isomer 1 yielded a chair-to-chair inversion barrier of approximately 19 kcal mol(-1), which is somewhat higher than the previously reported values for all-cis-1,2,3,4,5,6-C(6)H(6)R(6) in which R=Me or CO(2)Me. The possible relevance to Cannizzaro's 1854 report of a product with the formula (C(7)H(6))(n) is discussed. By contrast, Birch reduction of pentaphenylbenzene led to the formation of 2,3,5,6-tetraphenyl-1,1'-bicyclohexylidene.