Insights into the oxidation and decomposition of CO on Au/alpha-Fe2O3 and on alpha-Fe2O3 by coupled TG-FTIR

CO oxidation and decomposition behaviors over nanosized 3% Au/alpha-Fe2O3 catalyst and over the alpha-Fe2O3 support were studied in situ via thermogravimetry coupled to on-line FTIR spectroscopy (TG-FTIR), which was used to obtain temperature-programmed reduction (TPR) curves and evolved gas analysis. The catalyst was prepared by a sonication-assisted Au colloid based method and had a Au particle size in the range of 2-5 nm. Carburization studies of H 2-prereduced samples were also made in CO gas. According to gravimetry, for the 3% Au/alpha-Fe2O3 catalyst, there were three distinct stages of CO interaction with the Au catalyst but only two stages for the catalyst support. At low temperatures (相似文献   

Visible light-induced water oxidation on mesoscopic alpha-Fe2O3 films made by ultrasonic spray pyrolysis

Alpha-Fe(2)O(3) films having a mesoscopic leaflet type structure were produced for the first time by ultrasonic spray pyrolysis (USP) to explore their potential as oxygen-evolving photoanodes. The target of these studies is to use translucent hematite films deposited on conducting fluorine doped tin oxide (FTO) glass as top electrodes in a tandem cell that accomplishes the cleavage of water into hydrogen and oxygen by sunlight. The properties of layers made by USP were compared to those deposited by conventional spray pyrolysis (SP). Although both types of films show similar XRD and UV-visible and Raman spectra, they differ greatly in their morphology. The mesoscopic alpha-Fe(2)O(3) layers produced by USP consist mainly of 100 nm-sized platelets with a thickness of 5-10 nm. These nanosheets are oriented mainly perpendicularly to the FTO support, their flat surface exposing (001) facets. The mesoscopic leaflet structure has the advantage that it allows for efficient harvesting of visible light, while offering at the same time the very short distance required for the photogenerated holes to reach the electrolyte interface before recombining with conduction band electrons. This allows for water oxidation by the valence band holes even though their diffusion length is only a few nanometers. Distances are longer in the particles produced by SP favoring recombination of photoinduced charge carriers. Open-circuit photovoltage measurements indicate a lower surface state density for the nanoplatelets as compared to the round particles. These factors explain the much higher photoactivity of the USP compared to the SP deposited alpha-Fe(2)O(3) layers. Addition of hydrogen peroxide to the alkaline electrolyte further improves the photocurrent-voltage characteristics of films generated by USP indicating the hole transfer from the valence band of the semiconductor oxide to the adsorbed water to be the rate-limiting kinetic step in the oxygen generation reaction.     

Reversible UV-light-induced ultrahydrophobic-to-ultrahydrophilic transition in an alpha-Fe2O3 nanoflakes film

We describe a simple and robust approach to fabricating an alpha-Fe2O3 switchable surface. The hydrophobicity of alpha-Fe2O3 nanostructures was observed for the first time. A remarkable surface wettability transition can be easily achieved by ultraviolet (UV) illumination. The distinctive properties of surface defects are disclosed by X-ray photoelectron spectroscopy (XPS) analysis. The nanoscale adsorption and photocatalytic properties of Fe2+ defects account for the highly amphiphilic character of the surfaces. We believe that the experiment will further the molecular-scale understanding and manipulation of the wetting behavior on smart devices.     

Visible light photocatalytic reduction of water using SrSnO3 sensitized by CuFeO2

SrSnO_3–δ, prepared in sealed ampoules, crystallizes in the perovskite structure. The band gap is directly allowed at 3.93 eV. The conductivity was found to change markedly and occurs by polaron hopping with activation energy of 0.22 eV. The thermal variation of the thermopower indicates an electron mobility μ_{e 300K} = 3.15∙10^–6 cm²∙V^–1∙s^–1), thermally activated. The capacitance measurement shows a linear behavior from which a flat band potential of –0.20 V_SCE and an electronic density of 5.56∙10¹⁸ cm^–3 were determined. The conduction band edge (–4.32 eV/–0.42 V_SCE) lies below the H₂O/H₂ level. Accordingly, SrSnO_3–δ can be used for water photoreduction when combined with the delafossite CuFeO₂ as sensitizer. Translated from Teoreticheskaya i éksperimental’naya Khimiya, Vol. 45, No. 3, pp. 160-166, May-June, 2009.     

Facile route to alpha-FeOOH and alpha-Fe2O3 nanorods and magnetic property of alpha-Fe2O3 nanorods

alpha-FeOOH nanorods with diameters of 15-25 nm and lengths up to 170-300 nm were synthesized in high yield via a facile and template-free hydrothermal method at low temperature. After calcining the as-synthesized alpha-FeOOH at 250 degrees C for 2 h, we could obtain alpha-Fe2O3 nanorods. Interestingly, the as-obtained alpha-Fe2O3 nanorods exhibited weakly ferromagnetic characteristics at low temperature and superparamagnetic property at room temperature, which is different from the behavior of the corresponding bulk material.     

Visible light responsive Ni-doped micro/nanostructured Bi2O3 microspheres for photocatalytic denitrification of fuel oil

1. Download : Download high-res image (148KB)
2. Download : Download full-size image

     

Excited carrier dynamics of alpha-Cr2O3/alpha-Fe2O3 core-shell nanostructures

In this work alpha-Cr(2)O(3)/alpha-Fe(2)O(3) core-shell polycrystalline nanostructures were synthesized by using alpha-Cr(2)O(3) nanoparticles as seed crystals during aqueous nucleation. The formation of alpha-Fe(2)O(3) polycrystallites on alpha-Cr(2)O(3) surfaces was confirmed by X-ray diffraction, transmission electron microscopy, and energy-dispersive X-ray analysis. The excited-state relaxation dynamics of as-grown core-shell structures and "pure" alpha-Fe(2)O(3) particles of the same size were measured with femtosecond transient absorption spectroscopy. The results show the carrier lifetimes decay within a few picoseconds regardless of sample. This is likely due to fast recombination/trapping of carriers to defects and iron d-states.     

New benchmark for water photooxidation by nanostructured alpha-Fe2O3 films

Thin films of silicon-doped Fe2O3 were deposited by APCVD (atmospheric pressure chemical vapor deposition) from Fe(CO)5 and TEOS (tetraethoxysilane) on SnO2-coated glass at 415 degrees C. HRSEM reveals a highly developed dendritic nanostructure of 500 nm thickness having a feature size of only 10-20 nm at the surface. Real surface area determination by dye adsorption yields a roughness factor of 21. XRD shows the films to be pure hematite with strong preferential orientation of the [110] axis vertical to the substrate, induced by silicon doping. Under illumination in 1 M NaOH, water is oxidized at the Fe2O3 electrode with higher efficiency (IPCE = 42% at 370 nm and 2.2 mA/cm2 in AM 1.5 G sunlight of 1000 W/m2 at 1.23 VRHE) than at the best reported single crystalline Fe2O3 electrodes. This unprecedented efficiency is in part attributed to the dendritic nanostructure which minimizes the distance photogenerated holes have to diffuse to reach the Fe2O3/electrolyte interface while still allowing efficient light absorption. Part of the gain in efficiency is obtained by depositing a thin insulating SiO2 interfacial layer between the SnO2 substrate and the Fe2O3 film and a catalytic cobalt monolayer on the Fe2O3 surface. A mechanistic model for water photooxidation is presented, involving stepwise accumulation of four holes by two vicinal iron or cobalt surface sites.     

Quasicubic alpha-Fe2O3 nanoparticles with excellent catalytic performance

Uniform quasicubic alpha-Fe(2)O(3) nanoparticles enclosed by six identical {110} planes were synthesized by a simple solvothermal method. TEM investigations revealed that they were formed through oriented attachment of primary nanocrystals assisted by Ostwald ripening, and PVP surfactant played an important role in control over the final morphology of the products. These quasicubic nanoparticles could catalyze oxidation of almost 100% CO at a temperature of 230 degrees C, much lower than those of nanophases with flowerlike, hollow, or other forms of irregular external morphologies having various crystal planes exposed to the gas, indicating that the external morphology and especially the exposure crystal planes of alpha-Fe(2)O(3) nanocatalyst affect the catalytic activity more significantly than the traditionally accepted factors (such as high BET surface area, hollow structure, etc.) do for CO catalytic oxidation.     

Growth and magnetic properties of oriented alpha-Fe2O3 nanorods

alpha-Fe(2)O(3) nanorods have been deposited on Si substrates using the metal-organic chemical vapor deposition method. Structural analyses indicated that alpha-Fe(2)O(3) nanorods are preferentially oriented in the [104] direction on Si(100) substrates, and the nanorod possesses the single-crystalline structure. MFM image suggests that a spin domain is formed in the alpha-Fe(2)O(3) nanorod. Anisotropic magnetic property of the alpha-Fe(2)O(3) nanorods, i.e., the discrepancy of the saturation magnetization, is observed from SQUID measurements when the magnetic field are applied parallel and perpendicular to the substrate. A lower Morin temperature than that of the macroscopically crystalline hematite is observed when the magnetic field is applied parallel to the substrate.     

Electrochemically assisted visible light photocatalysis in a heterosupramolecular system consisting of alpha-Fe2O3 and surfactant molecular assembly

The synergy of an anodic-biased alpha-Fe2O3 film and a cationic surfactant molecular assembly leads to a high visible light induced activity for 2-naphthol oxidation and high stability. An abrupt increase in the photocatalytic activity at a surfactant concentration of ca. 0.2 mmol dm(-3) results from the adsolubilization of 2-naphthol into the hydrophobic nanospace of the surfactant bilayer formed on the alpha-Fe2O3 surface. Also, the surfactant bilayer provides sustainable photocurrent during the reaction.     

Facile fabrication of long alpha-Fe(2)O(3), alpha-Fe and gamma-Fe(2)O(3) hollow fibers using sol-gel combined co-electrospinning technology

Long alpha-Fe(2)O(3) hollow fibers have been prepared through a facile sol-gel combined co-electrospinning technique using ferric citrate as precursor, and alpha-Fe and gamma-Fe(2)O(3) hollow fibers have been obtained by reduction and reoxidation at different conditions. The outer diameter of the as-prepared hollow fibers is 0.5-5 microm with wall thickness of 200-800 nm. The obtained tubular fibers were characterized by thermal gravimetric (TG), FT-IR spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman techniques. In addition, magnetic properties of alpha-Fe and gamma-Fe(2)O(3) hollow fibers have also been investigated.     

Surfactant-assisted synthesis of alpha-Fe2O3 nanotubes and nanorods with shape-dependent magnetic properties

Alpha-Fe(2)O(3) nanorods and nanotubes have been synthesized and characterized by high-resolution transmission electron microscopy and X-ray diffraction. By means of different surfactant assistance, the high-quality one-dimensional products were obtained, respectively, with aqueous butanol solution as the solvent and carbamide as the base, giving rise to single-crystalline products at 150 degrees C. The formation mechanism has been presented. Significantly, the magnetic investigations show that the magnetic properties are strongly shape-dependent; i.e., the nanorods have a Morin transition at 166 K from canted antiferromagnetic state to antiferromagnetic state, while the nanotubes exhibit a three-dimensional magnetic ordering above 300 K that has been attributed to the presence of small particles in a few regions of the tubes.     

Interparticle interactions in agglomerates of alpha-Fe2O3 nanoparticles: influence of grinding

We have chemically prepared a sample of antiferromagnetic alpha-Fe2O3 nanoparticles by a gel-sol technique. M?ssbauer spectra of the as-prepared sample showed that superparamagnetic relaxation was suppressed due to strong magnetic interparticle interactions even at room temperature. However, subsequent grinding of the sample by hand in a mortar for some minutes resulted in fast superparamagnetic relaxation of some of the particles. The effect was even more dramatic if the alpha-Fe2O3 powder was ground for a longer time or together with nonmagnetic eta-Al2O3 nanoparticles. Similar effects were found after low-energy ball milling. Thus it is found that the agglomeration of the nanoparticles during preparation under wet conditions results in strong magnetic interparticle interaction, but a relatively gentle mechanical treatment is sufficient to break up the agglomerates, resulting in much weaker interactions. We show that these effects can also be seen when a soil sample containing magnetic nanoparticles is ground.     

Visible light driven photocatalytic hydrogen evolution over CdS incorporated mesoporous anatase TiO2 beads

Research on Chemical Intermediates - The synthesis of CdS incorporated mesoporous anatase TiO2 beads is reported in this work. The mesoporous structure, crystalline structure, morphology and...     

Antibacterial and photocatalytic properties of Cu2O/ZnO composite film synthesized by electrodeposition

Research on Chemical Intermediates - The high antibacterial and photocatalytic activities of Cu2O/ZnO composite films were synthesized through the electrodeposition method. The crystalline phase...     

Visible light photocatalytic activity of BiVO4 particles with different morphologies

Bismuth vanadate (BiVO₄) particles with different morphologies were synthesized by a one-step hydrothermal process and their optical and photocatalytic properties were investigated. Their crystal structure and microstructures were characterized using X-ray diffraction (XRD) and field emission scanning electron microscopy (FESEM). XRD patterns demonstrate that the as-prepared samples are monoclinic cell. FESEM shows that BiVO₄ crystals can be fabricated in different morphologies by simply manipulating the reaction parameters of hydrothermal process. The UV–visible diffuse reflectance spectra (UV–vis DRS) reveal that the band gaps of BiVO₄ photocatalysts are about 2.07–2.21 eV. The as-prepared BiVO₄ photocatalysts exhibit higher photocatalytic activities in the degradation of rhodamine B (Rh B) under visible light irradiation (λ > 420 nm) compared with traditional N-doped TiO₂ (N-TiO₂). Furthermore, wheat like BiVO₄ sample reveals the highest photocatalytic activity. Up to 100% Rh B is decolorized after visible light irradiation for 180 min. The reason for the difference in the photocatalytic activities for BiVO₄ samples obtained at different conditions were systematically studied based on their shape, size and the variation of local structure.     

Construction of a novel ZnCo2O4/Bi2O3 heterojunction photocatalyst with enhanced visible light photocatalytic activity

A novel ZnCo₂O₄/Bi₂O₃ heterojunction photocatalyst was prepared via balling method. The enhanced photocatalytic activity is mainly attributed to the broad photoabsorption and low recombination rate of photogenerated electron-hole pairs, which is driven by the photogenerated potential difference formed at the ZnCo₂O₄/Bi₂O₃ heterojunction interface.     

Visible light decomposition of ammonia to dinitrogen by a new visible light photocatalytic system composed of sensitizer (Ru(bpy)(3)2+), electron mediator (methylviologen) and electron acceptor (dioxygen)

Visible light decomposition of aqueous ammonia to dinitrogen was successfully achieved by using a new photocatalytic system based on a molecular photoelectron relay composed of a sensitizer (Ru(bpy)(3)2+), an electron mediator (methylviologen) and an electron acceptor (dioxygen), which can be used as a visible light-driven photocatalyst instead of UV-driven semiconductors.