MgCl_2负载(dbm)_2Ti(OPh)_2催化乙烯聚合

烯烃聚合的新型非茂催化剂由于合成相对简便并具有一些新特点,近年来开始受到人们的关注[1,2].ＩＶＢ族金属的β二酮络合物与烷基铝或烷氧基铝形成的催化体系对烯烃聚合也显现出一定的聚合活性.在一定压力下,β二酮锆/ＭＡＯ均相催化乙烯聚合时具有较高聚合活性[3].β二酮钛催化剂对于丙烯无规聚合和苯乙烯间规聚合均有较好结果[4～6].本文将报道用ＭｇＣｌ2负载的二苯氧基二(二苯甲酰甲烷)钛络合物((ｄｂｍ)2Ｔｉ(ＯＰｈ)2),以甲基铝氧烷(ＭＡＯ)为助催化剂,常压催化乙烯聚合的结果.1　原料ＭｇＣｌ2为抚顺301厂产品.ＭＡＯ(1.4ｍｏｌ/Ｌ甲…     

MgCl2/AlEtn(OEt)3-n负载单茂钛催化剂催化乙烯聚合研究

以MgCl2/AlEtn(OEt)3-n为载体,分别负载五甲基茂基三氯化钛(Cp*TiCl3)和五甲基茂基三苄氧基钛(Cp*Ti(OBz)3),得到两种负载催化剂,在较廉价的AlEt2Cl为助催化剂常压下可以高效地催化乙烯聚合.报道了载体的制备、聚合条件(不同的烷基铝助催化剂、聚合温度、铝钛摩尔比)对催化剂的聚合行为以及聚合物结构的影响.研究结果表明,两种负载催化体系对乙烯聚合具有较高的催化活性,可达105g PE/(molTi·h)数量级,所得聚乙烯的黏均分子量在105以上.经过13C-NMR和DSC分析,两种负载催化剂得到的均为线型聚乙烯.与均相催化剂相比,负载后的单茂钛催化体系的聚合反应动力学表现高效而平稳.这表明载体的微孔结构使活性中心得到了有效的分散,有效地提高了催化剂的活性,同时载体的受限空间有效抑制了聚乙烯增长链的β-H消除反应.     

单茚钛与β-二酮钛催化苯乙烯间规聚合反应的性能

1986年Ishihara等[1]首次报道间规聚苯乙烯以来,人们对苯乙烯间规聚合的各种单茂钛类(包括单茚钛)催化剂进行了大量研究[2～5].这些单茂钛类催化剂聚合活性高,但合成复杂,催化剂总收率低.近年来,合成方法更为简便、聚合活性较高的新型非茂钛的研究开始引起人们的关注[6～8].至此苯乙烯间规聚合的催化剂大致分为两类,即单茂钛催化剂和非茂钛催化剂.这两大类催化剂的催化性能各有特点.对它们催化性能进行对比的研究报道尚不多见.我们自行设计并合成了单茚钛和β-二酮钛催化剂,对它们的催化性能进行了比较.     

Y（AcAc）3／n—BuMgCl络合催化ε—己内酯本体聚合

应用稀土乙酰基丙酮盐［Ｙ（ＡｃＡｃ）３］与格氏试剂（ｎ－ＢｕＭｇＣｌ）络合催化ε－己内酯聚合。研究了单体与催化剂摩尔化、助催化剂用量、温度、时间及第三组份等条件对聚合反应的影响。结果表明，该催化体系具有较好的反应活性。增加助催化剂用量或选择合适的第三组份如二甲基亚砜能有效地提高单体转化率与聚合物分子量。分子量分布为２．１。Ｘ－衍射分析表明聚己内酯为结晶性聚合物。     

非MAO的茂钛均相催化体系催化苯乙烯间规聚合——[Cp~*TiMe_3]/[Ph_3C]~+[B(C_6F_5)_4]~-催化体系

非ＭＡＯ的茂钛均相催化体系催化苯乙烯间规聚合———［ＣｐＴｉＭｅ３］／［Ｐｈ３Ｃ］＋［Ｂ（Ｃ６Ｆ５）４］－催化体系许光学林尚安（中山大学高分子研究所广州５１０２７５）关键词茂钛络合物，茂金属催化剂，苯乙烯，间规聚苯乙烯间规聚苯乙烯（ｓＰＳ）由于具...     

三个新茂钛催化剂的合成及苯乙烯间规聚合

合成了三个新茂钛催化剂:茂基三呋喃甲氧基钛,茂基三(四氢呋喃甲氧基)钛,茂基三苄氧基钛,其结构均经元素分析、^1HNMR、^1^3CNMR、IR及MS确证。它们与甲基铝氧烷(MAO)组成的催化体系对苯乙烯间规均聚合有良好的催化活性。     

单茂钛化合物/MAO/AlR_3均相催化体系合成sPS与aPP研究

先考察部分水解三甲基铝（ＴＭＡ）制备固体改性甲基铝氧烷（ｍ ＭＡＯ）时，反应物Ｈ２Ｏ和ＴＭＡ的摩尔比对固体产物ｍ ＭＡＯ中ＴＭＡ含量的影响；然后考察不同的钛化合物特别是茂钛化合物（ＬｎＴｉＸｎ′，ｎ＝１，２，ｎ′＝２，３）和ｍ ＭＡＯ组成的均相催化体系分别进行苯乙烯间规聚合和丙烯无规聚合的效果作比较．在此基础上分析以茂基三正丙氧基钛［ＣｐＴｉ（ＯＰｒｎ）３］为主催化剂，不同ＴＭＡ含量的ｍ ＭＡＯ为助催化剂，及外加各种烷基铝（ＡｌＲ３）所组成的催化体系中钛的氧化数，同时对苯乙烯间规聚合和丙烯无规聚合进行比较研究，从中发现活性中心钛的氧化数以Ｔｉ（Ⅲ）为主时有利于苯乙烯间规聚合，不利于丙烯无规聚合；而氧化数以Ｔｉ（Ⅳ）为主时则对丙烯无规聚合有利．苯乙烯间规聚合时，外加烷基铝可节省ＭＡＯ用量．     

红外光谱法研究苯乙烯原子转移自由基聚合反应动力学

利用红外光谱法测定反应转化率研究原子转移自由基聚合反应动力学。在环己酮溶液中,以卤代烃为引发剂,过渡金属卤化物与配位剂２,２‘－联吡啶为催化体系,进行了苯乙烯聚合。分别就反应温度,反应物浓度和引发体系对苯乙烯聚合速率的影响进行了动力学测定,证实了原子转移自由基聚合具有活性聚合的特征,同时计算并讨论了苯乙烯原子转移自由基聚合反应的动力学数据。     

高分子负载Mn（Ⅲ）卟啉／PhIO体系催化烯烃环氧化反应研究

研究了负载化金属卟啉催化烯烃环氧化反应的催化活性，探索了催化反应体系中轴向配体、溶剂、锰卟啉在高分子上的担载量及反应温度等对催化反应的影响．结果表明，金属卟啉负载化后，增大了催化剂的稳定性．本文还考察了负载化催化剂对苯乙烯催化环氧化反应的动力学行为，根据Ｍｉｃｈａｅｌｉｓ－Ｍｅｎｔｅｎ方程，求得了相关的动力学参数     

茂钛化合物／改性MAO催化剂制备聚丙烯—b—间规聚苯乙烯嵌 …

以五甲基环戊二烯基三苄氧基钛化合物「Ｃｐ＊Ｔｉ（ＯＢｚ）３」为主催化剂，改性甲基铝氧烷作助催化剂，采用单体顺序投入法，合成了聚丙烯－ｂ－间规聚苯乙烯嵌段共聚物。外加三异丁基铝可以使活性中心的氧化态由Ｔｉ（Ⅳ）还原为Ｔｉ（Ⅲ），从而提高苯乙烯共聚单体的转化率。实验表明此催化体系对共聚物的合成具有较高活性，适宜的茂钛化合物浓度可阻止活性中心被丙烯预聚物包埋。抽除残余丙烯气也可促进苯乙烯的共聚合。对聚合     

Effect of styrene oligomers on syndiospecific polymerization of styrene

Styrene oligomers, preferentially consisting of styrene dimers and trimers, are formed by a free radical mechanism at the thermal polymerization of stabilizer-free styrene during storage and at higher polymerization temperatures. The identity of several dimer and trimer fractions formed in such a free radical polymerization, their influence on a coordinative polymerization reaction, the syndiospecific polymerization of styrene, as well as their effect on the properties of the resulting polymers has been investigated.Styrene dimers and styrene trimers reduce the polymerization activity of the transition metal catalyst significantly, especially at low amounts of oligomers added to the styrene. This behavior is discussed with respect to a proposed mechanism involving complexation of the active transition metal species with the specific oligomer instead of the styrene monomer, resulting in increased steric hindrance towards insertion of a styrene molecule to the active site.Both oligomers reduce the molecular weight of the syndiotactic polystyrene, by acting as chain-transfer agents. The constancy of the polydispersity over the whole concentration range of added dimer or trimer indicates that the uniformity of the active sites of the coordinative polymerization is not significantly influenced by the presence of the oligomers.The thermal properties of the polymers demonstrate that the oligomers do not affect the high syndiospecificity of the active catalytic sites, whereas the increase in crystallization temperature with increasing amounts of styrene dimer or trimer is comparable to effects observed by the addition of crystallization nucleators to semicrystalline polymers.     

β环糊精对苯乙烯无皂乳液聚合的影响

以苯乙烯为单体,过硫酸钾为引发剂,研究了β环糊精对无皂乳液聚合反应的影响.结果表明,环糊精的引入可以大大加快反应速度,提高单体转化率,并且反应速度随环糊精加入量的增加而增大;同时,环糊精的引入能够减小制得的聚合物微球的粒度分布,使聚合物微球的粒径大小更加均匀,而对粒径的影响不是很大.动力学分析的结果表明,环糊精可以提高单体的反应活性.当环糊精/单体比例增大到0.2时,单体反应活性是空白体系的3.3倍.     

Poly(styrene)-supported co-salen complexes as efficient recyclable catalysts for the hydrolytic kinetic resolution of epichlorohydrin

Here we describe an unprecedented synthetic approach to poly(styrene)-supported chiral salen ligands by the free radical polymerization of an unsymmetrical styryl-substituted salen monomer (H2salen = bis(salicylidene)ethylenediamine). The new method allows for the attachment of salen moieties to the polymer main chain in a flexible, pendant fashion, avoiding grafting reactions that often introduce ill-defined species on the polymers. Moreover, the loading of the salen is controlled by the copolymerization of the styryl-substituted salen monomer with styrene in different ratios. The polymeric salen ligands are metallated with cobalt(II) acetate to afford the corresponding supported Co-salen complexes, which are used in the hydrolytic kinetic resolution of racemic epichlorohydrin, exhibiting high reactivity and enantioselectivity. Remarkably, the copolymer-supported Co-salen complexes showed a better catalytic performance (>99 % ee, 54 % conversion, one hour) in comparison to the homopolymeric analogues and the small molecule Co-salen complex. The soluble poly(styrene)-supported catalysts were recovered by precipitation after the catalytic reactions and were recycled three times to afford almost identical enantiomeric excesses as the first run, with slightly reduced reaction rates.     

Atrazine transforming polymer prepared by molecular imprinting with post-imprinting process

Molecularly imprinted polymers bearing atrazine transforming activity were prepared by using newly designed templates that are atrazine analogues attached with an allyl or a styryl group via a disulfide bond at the 6-position, methacrylic acid as a functional monomer and styrene/divinylbenzene as crosslinkers. After polymerization, the disulfide bond was reduced to remove the atrazine moiety from the polymer matrix, followed by oxidation of the remaining thiol group to generate sulfonic acid (post-imprinting treatment), so that both a methacrylic acid residue and a sulfonic acid residue existed in an atrazine-imprinted cavity. The polymers indicated the selective binding of triazine herbicides and catalytic activity for methanolysis at the 6-position of atrazine, yielding a low toxic atraton.     

反相浓乳液方法制备聚苯乙烯/二乙烯基苯结构型泡孔聚合物

通过反相浓乳液聚合方法制备了系列聚苯乙烯/二乙烯基苯(PS/DVB)泡孔聚合物.水作为分散相,其分散相体积分数可达90%;苯乙烯单体作为连续相,聚合后构成PS/DVB泡孔聚合物的结构骨架.用扫描电镜系统研究了乳化剂的浓度、分散相体积分数、添加不同沸点的溶剂等对泡孔聚合物断面形态的影响,并考察了泡孔聚合物对水和柴油的吸附情况.结果表明,不同工艺条件下可以制备出不同孔径的泡孔聚合物,加入不同沸点溶剂使得泡孔壁也形成了多孔结构.     

含稀土钛系催化剂的苯乙烯高活性定向聚合研究

本文用新研制的含稀土钕化合物的钛系催化剂(SN-1催化剂)于苯乙烯在苯溶液中进行定向聚合,能同时使产率、等规度、催化效率与聚合速率四项指标得到提高并远超过文献值。研究了各种聚合条件,即催化剂浓度、苯乙烯单体浓度、助催化剂三乙基铝浓度和聚合温度各因素对于催化效率、聚苯乙烯产率、等规度和分子量的影响规律并作讨论。     

(n-BuCp)_2TiCl_2/Sn/I_s引发合成梳形羟基功能化无规聚苯乙烯及聚合物结构与性能的研究

采用茂金属化合物(n-BuCp)2TiCl2,还原剂(Sn),引发剂苯基缩水甘油基醚甲醛共聚物(Is)组成的催化体系引发苯乙烯活性自由基聚合,合成梳形羟基功能化无规聚苯乙烯.考察了聚合温度、聚合时间及引发剂与单体的比例对苯乙烯聚合的影响.当聚合温度在65～95℃范围内,随着聚合温度的升高,聚合物的分子量及单体转化率增加;在一定温度下,聚合物的分子量与单体转化率之间存在线性增长关系,且聚合物的分子量分布较窄(Mw/Mn=1.6～1.9).采用GPC,WAXD,13C(1H)-NMR对聚合物(沸丁酮可溶级分)的结构与性能进行了表征.GPC结果证明(n-BuCp)2TiCl2/Sn/Is引发苯乙烯聚合为活性聚合;13C-NMR和WAXD结果说明聚苯乙烯链段为无规结构;1H-NMR结果表明聚合物分子链中含有羟基,并根据其结果计算出聚合物分子的臂数为4,与引发剂Is的环氧基团数相等.这些结果证明了其聚合机理是经环氧基团开环后形成的自由基引发苯乙烯自由基聚合.     

活性正离子聚合与原子转移自由基聚合转换合成聚β-蒎烯接枝共聚物

通过活性正离子聚合与原子转移自由基聚合(ATRP)转换合成了β-蒎烯与甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、苯乙烯(St)的新型接枝共聚物.首先以α-氯代乙苯/TiCl4/Ti(OiPr)4/nBu4NCl体系引发β-蒎烯活性正离子聚合,合成预定分子量大小和窄分子量分布的聚β-蒎烯,然后经N-溴代琥珀酰亚胺(NBS)定量溴化,得到溴化聚β-蒎烯大分子引发剂(Br/β-蒎烯链节摩尔比为0.5).然后将该大分子引发剂与溴化亚铜(CuBr)/2,2′-联吡啶(bpy)复合,引发MMA、BA、St进行ATRP接枝聚合.接枝反应显示一级动力学特征,且产物的分子量及分子量分布可控,表明上述ATRP接枝聚合反应具有可控聚合特征.接枝产物的结构经1H-NMR分析得到进一步证实.     

Tertiary amine-functionalized polymers by atom transfer radical polymerization

The quantitative synthesis of tertiary amine-functionalized polymers by atom transfer radical polymerization is reported. Tertiary amine-functionalized polystyrene was prepared with the adduct of 1-(bromoethyl)benzene with 1-(4-dimethyl-aminophenyl)-1-phenylethylene as an initiator in the atom transfer radical polymerization of styrene in the presence of a copper (I) bromide/2,2′-bipyridyl catalyst system. The polymerization proceeded via a controlled free-radical polymerization process to afford quantitative yields of the corresponding tertiary amine-functionalized polystyrene with predictable number-average molecular weights (1600–4400), narrow molecular weight distributions (1.09–1.31), and an initiator efficiency of 0.95. The polymerization process was monitored by gas chromatographic analysis. The tertiary amine-functionalized polymers were characterized by thin-layer chromatography, size exclusion chromatography, potentiometry, and spectroscopy. All experimental evidence was consistent with quantitative functionalization via the 1,1-diphenylethylene derivative. Polymerization kinetic measurements showed that the polymerization reaction followed first-order-rate kinetics with respect to monomer consumption and that the number-average molecular weight increased linearly with monomer conversion. © 2001 John Wiley & Sons, Inc. J Polym Sci A Part A: Polym Chem 39: 2058–2067, 2001