Synergistic behavior of sodiumdodecylsulfate and 1,2-diheptanoyl-sn- glycero-3-phosphocholine in an aqueous medium: interfacial and bulk behavior

The synergistic behavior of sodiumdodecylsulfate (SDS) and 1,2-diheptanoyl-sn-glycero-3-phosphocholine (DHPC) binary mixtures has been studied with interfacial and pyrene fluorescence(I ₁/ I ₃) intensity measurements. From the interfacial data, the interfacial parameters; the maximum surface excess (Γ_max), or the minimum area per molecule (A _min), and the surface pressure at the critical micellar concentration (π_cmc) have been evaluated. The cmc value has been used for evaluating the free energies of micellization (ΔG ^o _m). The mixed micelle formation was evaluated with the help of the Clint equation. The SDS plus DHPC mixed micelles showed negative departure from ideality indicating synergistic interactions between the unlike components. The quantitative analysis of mixed micelle, mixed monolayer and the composition of the mixed micelle was carried out with the help of regular solution approximation. The interaction parameters, β and β^σ, in the mixed micelle as well as in the mixed monolayer, respectively showed negative values indicating synergistic behavior of SDS and DHPC molecules.     

Interfacial and aggregation properties of some anionic/cationic surfactant binary systems II. Mixed micelle formation and surface tension reduction effectiveness

Mixed micelle formation and surface tension reduction effectiveness (γ_cmc) were investigated for the following systems: triethanolammonium dodecylpoly(oxyethylene)sulfate (TADPS, containing about two ethylene oxide units)/dodecyltrimethylammonium bromide, TADPS/hexadecyltrimethylammonium bromide and TADPS/hexadecylpyridinium chloride. For all these anionic/cationic systems, the mixed critical micelle concentration (cmc) values reflect a strong synergism in mixed micelle formation, with β^M values ranging from −13.8 to −18.3. The mixed micelle composition is mixing-ratio dependent and, for equimolar mixtures, the mixed micelle is richer in the surfactant with the lower cmc. Precipitation is inhibited to a certain extent, thanks to the presence of ethylene oxide groups in the anionic species. The conditions for synergism in γ_cmc, differently expressed in the literature, can be derived from the surface tension equations established in our previous article. They can be conveniently described by a few characteristic constants: Γ _i ^∞ (saturated Gibbs excess), K _i (constant in the Szyszkowski equation), the cmc of the individual surfactants and the interaction parameters, β^S and β^M, of their mixtures. Excellent agreement between theoretically predicted and experimental results is obtained. With the increase in surfactant chain length, the β^M values decrease faster than the β^S ones and this can result in the loss of synergism in γ_cmc. Received: 11 June 2000 Accepted: 4 September 2000     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Interactions of monomeric and dimeric cationic surfactants with anionic polyelectrolytes: a fluorescence study

The interactions of conventional cationic, i.e. dodecyl-(DTAB), tetradecyl-(TTAB), and hexadecyltrimethylammonium bromides (HTAB), and dimeric cationic surfactants, i.e. dimethylene bis decyl-(10-2-10), and dodecyldimethylammonium bromides (12-2-12) with anionic polyelectrolytes, were studied by fluorescence measurements. The variation of I₁/I₃ ratio of the fluorescence of pyrene in aqueous solutions of polyelectrolytes was measured as a function of surfactant concentration. A three-step aggregation process involving the critical aggregation concentration (cac) and critical micelle concentration (cmc) was observed in each case. The cationic surfactants with lower hydrophobicity demonstrated higher degree of binding and vice versa.     

Aggregation Number of Ionic Surfactants and its Application for Alkyltrimethyl Ammonium Bromides and Sodium Tetradecyl Sulfate by Potentiometric Technique

A potentiometric technique based on surfactant ion selective electrode has been used for various cationic and anionic surfactants. The data obtained contain m ₁ (surfactant monomer concentration); m ₂ (free counterion concentration) and α (degree of dissociation of micelle) were used for determination of aggregation number at and above cmc (critical micelle concentration). Data fitting show a relationship between aggregation number with such parameters. The correlation equation obtained shows that size of ionic micelle vary sharply after cmc. Also, the equation obtained shows size of micelle growth with increase in counterion concentration.     

Interaction between cetyltrimethylammonium bromide and β-cyclodextrin: surface tension and interfacial dilational viscoelasticity studies

The interaction between cetyltrimethylammonium bromide (CTAB) and β-cyclodextrin (β-CD) was studied via surface tension and dilational viscoelasticity methods. The effect of sodium bromide and sodium chloride on the interaction between CTAB and β-CD were studied as well. The surface tension isotherms provided a series of parameters, including apparent critical micelle concentration (cmc*), surface tension at the cmc* (γ_cmc), stoichiometry of the complex (R), and the efficiency of adsorption (pC ₂₀ ). The addition of NaBr and NaCl decreases the cmc* of CTAB/β-CD solution. CTAB molecules enter the cavities of β-CD molecules thus formed both 1:1 and 1:2 inclusion complexes. From the change of γ_cmc, it can be seen that the CTAB/β-CD complexes (1:1) act as short-chain alcohol, which decrease γ_cmc, but the depression of cmc* is too small to be detected. R first decreases then increases as a function of NaBr and NaCl. Compared to NaCl, NaBr increases R more efficiently. The presence of NaBr and NaCl increases pC ₂₀ of CTAB/β-CD solution. The results obtained from the dilational viscoelasticity measurements at low dilational frequencies (0.005–0.1 Hz) reveal that the dilational modulus passes through a maxium value with increasing concentration of β-CD at a given concentration of CTAB. The addition of both NaBr and NaCl decreases the dilational modulus of a given concentration CTAB/β-CD solution. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

The interface air/water of n-dodecanephosphonic acid solutions

 The air/water interface of the system n-dodecanephosphonic acid (H₂DP)–water was studied by surface tension, ion-selective electrodes and evaporation in an electrobalance. The combination of surface tension and ion-selective electrodes measurements enables to study the adsorption of soluble surfactants above the cmc using the Gibbs’ equation. H₂DP formed a nonideal monolayer at the air/water interface with A _molec=0.995 nm² below the cmc. Above the cmc there was a reduction in adsorption giving A _molec=6.32 nm², which remained almost constant in the explored concentration range. This adsorption reduction may be due to a change composition on micellization, or to a thermodynamic advantage of micellization on adsorption. The reduction in the evaporation rate of water was mainly due to the reduction of the water activity, caused by the presence of solutes in bulk. This is because the strong changes in the surface coverage did not have significant influence on the evaporation rate. Received: 6 January 1997 Accepted: 15 August 1997     

Bifunctional Ion‐Selective Electrode Based on C60‐Cryptand 22 for Silver and Iodine Ions

Fullerence C60‐cryptand 22 was prepared and successfully applied as the electric carrier in the PVC electrode membrane of a bifunctional ion‐selective electrode for cations, e.g., Ag⁺ ions as well as anions, e.g., I^? ions. The bifunctional ion‐selective electrode based on C60‐cryptand 22 can be applied as a Silver (Ag⁺) ion selective electrode with an internal electrode solution of 10^?3 M AgNO₃ in water (pH = 6.3), or as an Iodide (I^?) ion selective electrode with an acidic internal electrode solution of 10^?4 M KI_(aq) (pH = 2) in which the cryptand 22 is protonated, and the C60‐cryptand 22 is changed to C60‐Cryptand22–H⁺ and becomes an anionic electro‐carrier to absorb the I^? ion. The Ag⁺ ion selective electrode based on C60‐cryptand 22 gave a linear response with a near‐Nernstian slope (59.5 mV decade^?1) within the concentration range 10^?1‐10^?3 M Ag⁺_(aq). The Ag⁺ ion electrode exhibited comparatively good selectivity for silver ions, over other transition‐metal ions, alkali and alkaline earth metal ions. The Ag⁺ ion selective electrode with good stability and reproducibility was successfully used for the titration of Ag⁺_(aq) with Cl^? ions. The Iodide (I^?) Ion selective electrode based on protonated C60–cryptand22‐H⁺ also showed a linear response with a nearly Nernstian slope (58.5 mV decade^?1) within 10^?1 ‐ 10^?3 M I^? _(aq) and exhibited good selectivity for I^? ions and had small selectivity coefficients (10^?2–10^?3) for most of other anions, e.g., F^? , OH^?, CH₃COO^?, SO₄^2?, CO₃^2?, CrO₄^2?, Cr₂O₇^2? and PO₄^3? ions.     

Synthesis, Characterization and Solution Properties of Hydrophobically Modified Polyelectrolyte Poly(AA-co-TMSPMA)

The hydrophobically modified polyelectrolyte was synthesized using precipitation polymerization of acrylic acid and 3-[tris(trimethylsilyloxy)silyl]propyl methacrylate (TMSPMA) in various molar ratios in supercritical carbon dioxide. FT-IR, ¹H NMR, capillary viscometry, rotational viscometer, transmission electron microscopy and fluorescence spectroscopy were used to characterize this copolymer. The viscosity of the copolymers showed a strong dependence on pH with a maximum at pH=5.5. Associating morphologies of the copolymer were observed by TEM. Associating morphologies of poly(AA-co-TMSPMA) solution changed from a global structure to a shell-core structure with increasing hydrophobic levels. A solution of sample PAT4 with a shell-core structure had the largest viscosity value. In addition, the critical micelle concentration of copolymer solution, cmc, was determined from the relative viscosity. The critical micelle concentration was further confirmed by fluorescence spectroscopy using 1-pyrenemethylamine hydrochloride, PyMeA⋅HCl, as a cationic fluorescent probe. The cmc was determined from the intensity ratios, the first to the third emission peaks I ₁/I ₃, and the excimer to monomer I _E/I _M ratio of the pyrene probe as a function of concentration.     

Synthesis and properties of triethylalkylammonium perfluorooctanesulfonates (APFOS)

Six ionic surfactants containing a perfluorooctanesulfonic anion and a positively charged ammonium in a molecule, R_FSO₃⁻N⁺Et₃C_nH_2n+1 (n=2, 4, 6, 8, 10 and 12), were prepared from perfluorooctanesulfonyl fluoride, triethylamine and linear alkanol. Solution properties of triethylalkylammonium perfluorooctanesulfonates (APFOS) have been measured in terms of surface tension. The values of critical micelle concentration (cmc) decrease with an increase of N-alkyl chain length, and the logarithm of the cmc decreases linearly with increasing N-alkyl chain length (n≥6), while the negative values of standard free energy for the adsorption become larger as the N-alkyl chain length increases.     

Investigation of electrochemical reactions in the solid state cell Cu/RbCu4Cl3I2/C

Using experimental potential values for a vitreous carbon electrode in contact with the RbCu₄Cl₃I₂ solid electrolyte, the concentration of Cu²⁺ ions in the electrolyte was determined. At 0.5 V, the concentration of Cu²⁺ was 1.25×10¹⁸ cm^–3. The estimated values of the Cu²⁺ ion concentration in RbCu₄Cl₃I₂ (0.8%) and the potential of the vitreous carbon electrode after electrochemical decomposition of RbCu₄Cl₃I₂ (0.606 V) correspond to experimental values of 2% and 0.58 V, respectively. This demonstrates the adequacy of the model describing the electrode potential of Cu²⁺ as a function of the concentration in RbCu₄Cl₃I₂. When the C/RbCu₄Cl₃I₂ interface was polarized, the diffusion coefficient of Cu²⁺ was 1.5×10^–8 cm² s^–1. Investigations of the interface between the copper electrode and RbCu₄Cl₃I₂ were carried out by galvanostatic and potentiostatic methods. A 1-μm layer of cuprous oxide, Cu₂O, was discovered on the interface of the copper electrode with RbCu₄Cl₃I₂. This layer blocks the course of the electrochemical reaction Cu⁰–e^–⇌Cu⁺ with participation of copper metal. The copper electrode behaves as an inert redox electrode at low overvoltages. In this case, at the Cu₂O/RbCu₄Cl₃I₂ interface an electrochemical reaction with Cu²⁺ ion participation, Cu⁺–e^–⇌Cu²⁺, takes place. The results suggest that the reaction rate is limited by slowing the Cu²⁺ diffusion in RbCu₄Cl₃I₂. The initial Cu²⁺ ion concentration in the electrolyte near this interface is about 1.4×10¹⁷ cm^–3. The exchange current density is about (4±2)×10^–6 A cm^–2. At potentials ϕ>8–10 mV, an electrical breakdown of the Cu₂O layer takes place, allowing copper metal to ionize to Cu⁺. We suggest that at 10 mV<ϕ<100 mV the rate of this reaction is limited by the formation and growth of copper nuclei and at ϕ>120 mV the reaction rate is limited by charge transfer. Electronic Publication     

Interfacial and aggregation properties of aqueous sodium <Emphasis Type="Italic">N</Emphasis>-dodecanoylsarcosinate solutions at different pH

The pH dependence of an anionic surfactant, sodium N-dodecanoylsarcosinate (SLAS), has been studied by measuring interfacial tension, fluorescence, dynamic light scattering, etc., in aqueous solutions with phosphate and borate buffers. The interfacial tension (γ) of SLAS decreases remarkably with a pH decrease and is constant at pH > 7.3. The observed values for the critical micelle concentration (cmc) and the surfactant concentration at which its γ value is reduced by 20 mN/m from that of pure water (C ₂₀) decrease with a pH decrease, while those also become constant at pH > 6.5 and >7.3, respectively. On the other hand, the interfacial excess of SLAS increases at pH < 7.3. These interfacial behaviors have been further investigated by the addition of Tl⁺ which replaces Na⁺ of SLAS. The observed γ values of LAS⁻ with the different counter cations are in the order of H⁺ < Tl⁺ < Na⁺. In order to reveal aggregation properties of SLAS, the aggregation number (N _agg), the micropolarity, the hydrodynamic radius (R _h) of micelle, and the fluorescence anisotropy of Rhodamine B (r) have been evaluated at various pHs. The N _agg value shows a decreasing tendency with a pH increase. The I ₁/I ₃ ratio and the R _h values do not strongly depend on pH. The r value decreases until pH 7 and remains constant at pH > 7.0. These interfacial and micelle properties have been discussed in detail considering the electrostatic interaction and the molecular structures of the hydrophilic headgroup.     

HEXADECYLTRIMETHYLAMMONIUM BROMIDE + TETRADECYLTRIMETHYL-AMMONIUM BROMIDE MIXED MICELLES IN AQUEOUS GLYCOL OLIGOMERS

The conductances of hexadecyltrimethylammonium bromide (HTAB) + tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of HTAB (α_HTAB) were measured in pure water as well as in the presence of various aqueous ethylene glycol oligomers containing 5, 10 and 20 wt% of each additive in their respective binary mixtures at 30°C. From the conductivity data, the critical micellar concentration (cmc), degree of counter ion association (χ) and the standard free energy of transfer of the surfactant hydrocarbon chain from the medium to the micelle (ΔG^O _HP ) for HTAB and TTAB were computed. From the conductivity data of mixed surfactants systems, apart from cmc and χ, the regular solution theory parameters were also computed in order to explore the non-ideality in the mixed micelle formation in the presence of additives. The micellar parameters of both kind of surfactants and their mixtures show a significant dependence on the amount as well as on the number of repeating units of glycol oligomers. However, the non-ideality of mixed micelle formation remains unaffected in the presence of additives. These results have been explained on the basis of the medium effects of aqueous additive and it has been concluded that there are no significant interactions of glycol oligomers with the micelles of single and mixed surfactants.     

Nonionic Micelles

Current theories and recent results on the thermodynamics of micelle formation and the structure of micelles of nonionic surfactants in water are reviewed. The experimental results are in favor of the mass-action model of micelle formation. This model predicts the existence of micelles below the critical micelle concentration (cmc) and a gradual transition at the cmc. The cmc, as determined conventionally, depends on both the association number, N, and the equilibrium constant, ⁿK_c of closed association on a mole basis. Empirical' relationships between N and ⁿK_c have been found for n-octyl-β-D-glucoside (OG) and two nonylphenol(ethylene glycol)_x ethers (NP) at various temperatures as well as for four different ethylene glvcol acrylamides (EMA) CH₂?C(CH₃)-CO-NR-(CH₂)₁₀-CO-(OCH₂CH₂)₁₅-OCH₃The equilibrium constants of association can be determined by different molecular weight methods, even in the case of polymolecular unimers. Extrathermodynamic relationships exist between the enthalpies and entropies of association.     

Micellization study and adsorption properties of an ionic surfactant synthesized from hydrogenated cardanol in air–water and in air–brine interfaces

A sulfonate (2,4-sodium dissulfonate-5-n-pentadecylphenol) was synthesized from hydrogenated cardanol and the micellization study was carried out using temperature and electrolyte concentration as variables. The adsorption parameters were obtained using surface tension data by the Frumkin adsorption model and the Simplex Nelder–Mead method. Values of critical micelle concentration (cmc) and surface excess (Γ) were obtained in three different temperatures (303 K, 313 K, and 323 K) and two electrolyte concentrations (NaCl solution—0.1 M and 0.25 M). It was verified that cmc decreased with increasing electrolyte concentration and temperature. The Gibbs free energy showed that the micellization process was spontaneous for all studied systems and temperatures, and also that the presence of several CH₂ groups was significant for micelle formation.     

Variations in the Charge and Open-Circuit Potential of a Platinum Electrode during Adsorption of Iodine and Iodide Ions

The adsorption of iodine and iodide anions on a Pt/Pt electrode (0.5 M H₂SO₄ as a supporting solution) is compared using potentiodynamic and galvanostatic charging curves, transients of the current and open-circuit potential (OCP), and analytical measurements. Variations in the charge and OCP during the adsorption obey relationships derived for strong adsorption of neutral species and ions on a hydrogen electrode with the formation of irreversibly adsorbed atoms. The main product of the I₂ and I^– chemisorption in acid solutions is adsorbed iodine atoms. However, adsorption of iodine occurs in noticeable amounts and above a monolayer in the form of species that undergo electrodesorption during a cathodic polarization to potentials of the beginning of hydrogen adsorption. In the presence of a monolayer of adsorbed iodine atoms, potential of the zero total charge of a Pt/Pt electrode is in the oxygen adsorption region.     

Cationic Surfactant Ion-Selective PVC Membrane Electrode Containing Macrocyclic Diimine Crown Ether

ABSTRACT

DP⁺ ion-selective PVC membrane electrode based on 2,3,11,12-dibenzo-5,9-diaza-4,9(10)-cis-diimino-1,13-dioxacyclopentadecane as a novel macrocyclic diimine crown ether is proposed. o-Nitrophenyl octyl ether as plasticizer and potassium tetrakis(4-chlorophenyl)borate as lipophilic salt were used. The electrode exhibits a Nernstian response for 1.0 x 10^?2-1.0 x 10^?6 mol 1^?1 DPCl with a slope of 58 mVdecade^?1. The detection limit is 2.5 x 10^?7 mol 1^?1. The electrode response was stable over a wide pH range (3-11). The lifetime of the electrode was about 2 months. The electrode shows a high selectivity towards inorganic cations. Among the organic cations tested, only hexadecyltrimethylammonium ion interferes. The electrode was suitable for determining the critical micelle concentration and as an end-point detector in the potentiometric titration of the cationic surfactants.     

Effects of Cs and Na ions on the interfacial properties of dodecyl sulfate solutions

The competitive binding of counterions to anionic dodecyl sulfate ions in aqueous solutions of cesium dodecyl sulfate (CsDS) and sodium dodecyl sulfate (SDS) mixtures, which significantly influences the critical micelle concentration (cmc) and surface (or interfacial) tension of surfactant solutions, was investigated. The cmc and degree of counterion binding were obtained through electrical conductivity measurements. The curve of cmc versus the mole fraction of CsDS in the surfactant mixture was simulated by Rubingh's equations, which enabled us to estimate the interaction parameter in micelles (W _R) based on the regular solution approximation. The curve-fitting exhibited a slightly negative value (W _R=−0.1), indicating that the mixing (SDS+CsDS) enhances micelle formation owing to a greater interaction between surfactant molecules and counterions than in pure systems (SDS). On going from SDS, SDS:CsDS(75:25), SDS:CsDS(50:50), SDS:CsDS(25:75) to CsDS, interfacial tension at the hexadecane/surfactant-solution interface showed a negative deviation from the mixing rule (interaction parameter in adsorbed film W _A=−0.38), indicating the replacement of Na⁺ bound to anionic dodecyl sulfate by Cs⁺ ions owing to the stronger interaction between the Cs⁺ and the dodecyl sulfate ions. Droplet sizes of emulsion formed with hexadecane and aqueous dodecyl sulfate solutions were investigated using the light scattering spectrophotometer. The higher binding capacity of Cs⁺, having a smaller hydrated ionic size than Na⁺, also resulted in a negative deviation in emulsion droplet size in mixed systems. Received: 10 May 2000/Accepted: 11 August 2000     

Interfacial and micellar properties of some anionic/cationic binary surfactant systems. 1. Surface properties and prediction of surface tension

The surface tension equations of binary surfactant mixtures are established by combining the Szyszkowski equation for pure surfactant solutions and extended nonideal theory for mixed adsorption. They are then successfully applied to two relatively long-chain anionic/cationic binary surfactant systems: triethanolammonium dodecylpoly(oxyethylene)sulfate, as an anionic species (containing about 2 ethylene oxide units), mixed with dodecyltrimethylammonium bromide or hexadecyltrimethylammonium bromide. The composition of the mixed monolayer is mixing-ratio dependent and is slightly asymmetric: for overall equimolar mixtures, the larger mole fraction in the mixed monolayer is that of the more surface-active ion. The strong synergetic effects observed in the surface tension reduction efficiency are reflected by large negative β^s parameters, according to regular solution theory. They can be interpreted by the more negative adsorption free energy of each surfactant and the smaller area occupied by surfactant hydrocarbon chains in the mixed monolayer. Received: 20 April 1998 /Accepted in revised form: 27 August 1999     

Specific adsorption of iodide-ion at liquid (Ga-In)-electrode of eutectic composition from aqueous solutions with constant ionic strength

The adsorption behavior of iodide-ion at liquid (Ga-In)-electrode in aqueous electrolyte solutions at 305 K is studied by the electrochemical impedance spectroscopy, differential capacitance, and cyclic voltammetry. The equivalent circuit describing the experimental data in the presence and in the absence of the I⁻ ion is a series connection of a resistance and a capacitance that is frequency-independent over a ∼500 Hz to 100 kHz range. The experimental data were obtained by the mixed electrolyte method in electrolyte solutions acidified with HClO₄ down to pH 3, with excess of surface-inactive ion ClO₄⁻ and constant ionic strength (0.1 M). The analysis resulted in the determination of the charge σ₁ of the I⁻ ion specifically adsorbed at the liquid (Ga-In)-electrode at the adsorbate maximal concentration: σ_I = 7.73 μC/cm² in the case of analysis at σ = const (at the zero charge potential) or σ_I = 7.50 μC/cm² in the case of analysis at E = const. These values are characteristic of rather strong specific adsorption. The values of σ_I of the studied anion were used in the calculations of different isotherms with the purpose of the adsorption parameters determination. The obtained results were compared with literature data determined on other metals in the presence of specifically adsorbable I⁻ ion.