Wittig-olefination via an yttrium-coordinated betaine

We report the synthesis of an yttrium phosphonium methylide complex and its reaction with benzophenone to form an excedingly rare hydrocarbon soluble metal-coordinated betaine. While this reaction models the C-C σ-bond formation step of the Wittig reaction under salt-conditions, addition of Ph(3)P=O to the betaine complex results in formation of 1,1-diphenylethene.     

Organic-inorganic hybrids based on polyoxometalates. 6. Syntheses, structure, and reactivity of the bis(tert-butylsilyl)decatungstophosphate [(gamma-PW10O36)(t-BuSiOH)2]3-

Bis(tert-butylsilyl)decatungstophosphate (n-Bu4N)3[(gamma-PW10O36)(t-BuSiOH)2] (1) has been synthesized through phase-transfer conditions, by reaction of t-BuSiCl3 with Cs7[(gamma-PW10O36)].xH2O. This new hybrid anion has been characterized by elemental analysis, X-ray crystallography, multinuclear solution and solid-state NMR, and infrared spectroscopy. Crystals of 1 are monoclinic, space group C2/c, with lattice constants a = 44.762(10) A, b = 19.032(4) A, c = 22.079(8) A, beta = 98.9(2) degrees, and Z = 8. Anion 1 has nominal Cs symmetry and displays an "open structure" with two t-BuSiOH groups anchored to the (gamma-PW10O36) framework. The two t-BuSiOH units are nonequivalent as confirmed by 29Si CP-MAS NMR and by diffuse reflection infrared spectroscopy. The two OH groups are linked through one H-bond (dO-O = 2.63 A). According to 29Si and 183W NMR, 1 adopts a more symmetrical conformation (C2v) in solution. Anion 1 reacts cleanly in homogeneous conditions with Me2SiCl2 to yield (n-Bu4N)3[(gamma-PW10O36)(t-BuSiO)2(SiMe2)] (2). The structure of 2 has been inferred from multinuclear NMR and infrared spectroscopy. The hybrid "closed-structure" anion 2 consists of the (gamma-PW10O36) framework on which is grafted a heterosilylated network composed of a capping fragment, Si(CH3)2, linked to the t-BuSi groups through two siloxane bridges.     

Synthesis and Crystal Structure of [K(18-Crown-6)]3P11·2en

The undecaphosphide anion in ethylenediamine/18-crown-6 solution is isolated as [K(18-crown-6)]3P11·2en 1.The crystal structure has been determined by single-crystal X-ray diffraction.The crystal is of monoclinic,space group P21 with a = 13.4731(7),b = 16.1123(6),c =16.5117(9) (A),β = 112.133(2)°,V = 3320.3(3) (A)3,Dc= 1.371 g/cm3,C40H88K3N4O18P11,Mr=1371.11,F(000) = 1444,μ = 0.532 mm-1,Z = 2,R = 0.0544 and wR = 0.1326 for 11423 observed reflections (I ＞ 2σ(I)).The "naked" P11 3- ion is stabilized by two partly sequestered potassiums.The third partly sequestered potassium does not interact with the P atom (P(6)) but with two solvent molecules.     

Carboxylate phosphabetaines based on tertiary phosphines and unsaturated dicarboxylic acids

By reaction of triorganylphosphines with unsaturated dicarboxylic acids adducts of betaine structure were synthesized whose stability depended on the character of substituents at phosphorus and on the structure of acid. The betaine obtained from phosphines and maleic and fumaric acids redily underwent decarboxylation into the corresponding monoacyl phosphonium derivatives. The structure of the latter was established by means of X-ray crystallography. The adduct prepared from phosphines and itaconic acid was stabilized by intramolecular hydrogen bond between the acylate anionic center and the “second” carboxy group.     

Polyoxomolybdates functionalized with phosphonocarboxylates

The novel, functionalized heteropolymolybdate [(O(2)CCH(2)PO(3))(2)Mo(5)O(15)](6-) (1) has been synthesized and characterized by IR and (31)P NMR spectroscopy and elemental analysis. Single-crystal X-ray analysis was carried out on Rb(4)KNa[(O(2)CCH(2)PO(3))(2)Mo(5)O(15)].H(2)O, which crystallizes in the monoclinic system, space group P2(1)/n, with a = 10.146(2) A, b = 13.704(3) A, c = 20.577(4) A, beta = 94.88(3) degrees, and Z = 4. The title polyanion consists of a ring of five MoO(6) octahedra with four edge junctions and one corner junction. This nonplanar arrangement is stabilized by two phosphonocarboxylate groups that are bound via their phosphonate functionalities on opposite sides of the ring. As a result the two dangling arms with their terminal carboxylate groups protrude away from the molybdenum-oxo framework in diametrically opposed directions. The solid-state structure of 1 is preserved in solution on the basis of NMR. We also report on the synthesis and characterization of the isostructural derivative [(O(2)CC(2)H(4)PO(3))(2)Mo(5)O(15)](6-) (2).     

Novel rhenium chelate system derived from dimercaptosuccinic acid for the selective labeling of biomolecules

This work is part of an effort to develop chelating agents for stable binding and easy conjugation of Re-188 to biologically interesting structures. Starting from the well-known in vivo stability of [(188)ReO(DMSA)(2)](-), we want to exploit this coordination system for the design of (188)ReO(V) chelates, which are stable toward reoxidation to perrhenate and toward ligand exchange under all conditions of radiopharmaceutical development. Therefore, a new type of tetradentate ligand has been synthesized by bridging two molecules of N,N'-diisobutyl-2,3-dimercaptosuccinamide with N-(3-aminopropyl)propane-1,3-diamine. The resulting stereoisomeric tetrathiolato S(4) ligand of composition ((i)()Bu)(2)N(O)C-C(SH)-C(SH)-C(O)NH-(CH(2))(3)-NH-(CH(2))(3)-NHC(O)-C(SH)-C(SH)-C(O)N((i)Bu)(2) forms anionic five-coordinate oxorhenium(V) complexes by a ligand-exchange reaction of NBu(4)[ReOCl(4)] in methanol. In the absence of a base, the compounds were isolated as "betaine", [ReO(S(4))], with the protonated nitrogen of the bridge serving as an internal "counterion". Two representatives have been fully characterized in both the solid and solution states and found to adopt the expected square-pyramidal coordination geometry. The equatorial plane is formed by four thiolate sulfur atoms, whereas the oxygen occupies the apical position. The orientation of the metal oxo group is exo in relation to the carbamido groups in both isomers. Both complexes are stereoisomeric regarding the junction of the triamine chain.     

Building block approach to nanostructures: step-by-step assembly of large lanthanide-containing polytungstoarsenate aggregates

Three large cerium-containing polytungstoarsenate aggregates have been synthesized via a step-by-step assembly process. Reaction of Na(9)[AsW(9)O(33)] precursors, ceric sulfate and potassium citrate in an acidic aqueous solution at pH = 3 led to the isolation of a new dimeric sandwich-type compound K(9)Na(7)[{Ce(2)O(H(2)O)(5)}{WO(H(2)O)}{AsW(9)O(33)}(2)](2). approximately 48H(2)O. The presence of the citrate anion prevents precipitation of simple lanthanide salts with polyoxometalates. The reaction of compound with alpha-alanine at pH = 2 resulted in the formation of a new alanine-decorated cryptand compound K(2)Na(10)[Ce(4)As(4)W(44)O(151)(ala)(4)(OH)(2)(H(2)O)(10)]. approximately 40H(2)O. The reaction between compound and MnCl(2) at pH = 5 yielded the other inorganic cryptate Mn(0.5)K(5)Na(18)[Ce(4)As(4)W(41)O(149)]. approximately 50H(2)O. All compounds are characterized by elemental analyses, TG analyses, IR, UV-Vis absorption spectra, X-ray photoelectron spectroscopy (XPS), single crystal X-ray diffraction and electrochemical analyses. The crystal data for these compounds: , triclinic, P1[combining macron], a = 12.314(3) A, b = 17.953(4) A, c = 22.355(5) A, alpha = 90.18(3) degrees , beta = 101.97(3) degrees, gamma = 91.08(3) degrees , Z = 1; monoclinic, P2(1)/n, a = 23.4483(15) A, b = 21.8764(13) A, c = 23.6930(14) A, beta = 111.0560 degrees , Z = 2; , triclinic, P1[combining macron], a = 20.636(4) A, b = 23.000(4) A, c = 25.039(4) A, alpha = 81.991(3) degrees , beta = 73.333(3) degrees, gamma = 74.835(3) degrees, Z = 2. Electrochemical analyses of compounds suggest that tetravalent cerium ion can be stabilized by the polyanions with high negative charges.     

Di-tert-butyl phosphate complexes of cobalt(II) and zinc(II) as precursors for ceramic M(PO3)2 and M2P2O7 materials: synthesis, spectral characterization, structural studies, and role of auxiliary ligands

Reaction of the metal acetates M(OAc)2xH2O with di-tert-butyl phosphate (dtbp-H) (3) in a 4:6 molar ratio in methanol or tetrahydrofuran followed by slow evaporation of the solvent results in the formation of metal phosphate clusters [M4(mu 4-O)(dtbp)6] (M = Co (4, blue); Zn (5, colorless)) in nearly quantitative yields. The same reaction, when carried out in the presence of a donor auxiliary ligand such as imidazole (imz) and ethylenediamine (en), results in the formation of octahedral complexes [M(dtbp)2(imz)4] (M = Co (6); Ni (7); Zn (8)) and [Co(dtbp)2-(en)2] (9). The tetrameric clusters 4 and 5 could also be converted into mononuclear 6 and 8; respectively, by treating them with a large excess of imidazole. The use of slightly bulkier auxiliary ligand 3,5-dimethylpyrazole (3,5-dmp) in the reaction between cobalt acetate and 3 results in the isolation of mononuclear tetrahedral complex [Co(dtbp)2(3,5-dmp)2] (10) in nearly quantitative yields. Perfectly air- and moisture-stable samples of 4-10 were characterized with the aid of analytical, thermoanalytical, and spectroscopic techniques. The molecular structures of the monomeric pale-pink compound 6, colorless 8, and deep-blue 10 were further established by single-crystal X-ray diffraction studies. Crystal data for 6: C28H52CoN8O8P2, a = 8.525(1) A, b = 9.331(3) A, c = 12.697(2) A, alpha = 86.40(2) degrees, beta = 88.12(3) degrees, gamma = 67.12(2) degrees, triclinic, P1, Z = 1. Crystal data for 8: C28H52N8O8P2Zn, a = 8.488(1) A, b = 9.333(1) A, c = 12.723(2) A, alpha = 86.55(1) degrees, beta = 88.04(1) degrees, gamma = 67.42(1) degrees, triclinic, P1, Z = 1. Crystal data for 10: C26H52CoN4O8P2, a = b = 18.114(1) A, c = 10.862(1) A, tetragonal, P4(1), Z = 4. The Co2+ ion in 6 is octahedrally coordinated by four imidazole nitrogens which occupy the equatorial positions and oxygens of two phosphate anions on the axial coordination sites. The zinc derivative 8 is isostructural to the cobalt derivative 6. The crystal structure of 10 reveals that the central cobalt atom is tetrahedrally coordinated by two phosphate and two 3,5-dmp ligands. In all structurally characterized monomeric compounds (6, 8, and 10), the dtbp ligand acts as a monodentate, terminal ligand with free P=O phosphoryl groups. Thermal studies indicate that heating the samples at 171 (for 4) or 93 degrees C (for 5) leads to the loss of twelve equivalents of isobutene gas yielding carbon-free [M4(mu 4-O)(O2P(OH)2)6], which undergoes further condensation by water elimination to yield a material of the composition Co4O19P6. This sample of 4 when heated above 500 degrees C contains the crystalline metaphosphate Co(PO3)2 along with amorphous pyrophosphate M2P2O7 in a 2:1 ratio. Similar heat treatment on samples 6-8 results in the exclusive formation of the respective metaphosphates Co(PO3)2, Ni(PO3)2, and Zn(PO3)2; the tetrahedral derivative 10 also cleanly converts into Co(PO3)2 on heating above 600 degrees C.     

Mechanism and diastereoselectivity of aziridine formation from sulfur ylides and imines: a computational study

A computational investigation of the title reaction involving semistabilized (R = Ph) and stabilized (R = CO2Me) sulfur ylides has been performed using DFT methods including a continuum model of solvent. Our results provide support for the generally accepted mechanism and are in very good agreement with observed cis/trans selectivities. This study shows that betaine formation is nonreversible, and that selectivity is thereby determined at the initial addition step, in the case of semistabilized ylides. Our analysis indicates moreover that addition TS structures are governed by the steric strain induced by the N-sulfonyl group, which favors the transoid approach in the case of syn betaine formation and the cisoid mode of addition in anti TSs. The observed low trans selectivity is accounted for by the favorable Coulombic interactions and stabilization by C-H...O hydrogen bonding allowed in the cisoid anti addition TS. In the case of stabilized ylides, the endothermicity of betaine formation combined with the high barrier to ring closure render the elimination step rate- and selectivity-determining. Accordingly, the low cis selectivity observed in stabilized ylide reactions is explained by the lower steric strain in the elimination step generated by the formation of the cis aziridine (as compared to the trans case).     

Synthesis and Crystal Structure of a Cyano-bridged Bimetallic Complex [La(betaine)2(H2O)6Fe(CN)6]·2H2O

The title complex [La(betaine)2(H2O)6Fe(CN)6](2H2O (betaine = (CH3)3NCH2CO2) has been synthesized and characterized by X-ray single-crystal structure analysis. The crystal crystallizes in monoclinic, space group P21/n with a = 15.793(5), b = 8.927(3), c = 22.257(7) (A), β = 110.147(5)°, C16H38FeLaN8O12, Mr = 729.31, Z = 4, V = 2946.0(15) (A)3, Dc = 1.640 g/m3, μ(MoKα) = 1.988 mm-1, F(000) =1476, R = 0.0388 and wR = 0.0827 for 4237 observed reflections (I > 2σ(I)). The La3+ ion is nine-coordinated by one cyano nitrogen atom and eight oxygen atoms of two betaine and six water molecules. Each complex molecule is connected to form a 3D network structure by some O-H…O and O-H…N hydrogen bonds.     

Modified polyoxometalates: Hydrothermal syntheses and crystal structures of three novel reduced and capped Keggin derivatives decorated by transition metal complexes

Three novel polyoxometalate derivatives decorated by transition metal complexes have been hydrothermally synthesized. Compound 1 consists of [PMo(VI)(6)Mo(V)(2)V(IV)(8)O(44)[Co (2,2'-bipy)(2)(H(2)O)](4)](3+) polyoxocations and [PMo(VI)(4-)Mo(V)(4)V(IV)(8)O(44)[Co(2,2'-bipy)(2)(H(2)O)](2)](3-) polyoxoanions, which are both built on mixed-metal tetracapped [PMo(8)V(8)O(44)] subunits covalently bonded to four or two [Co(2,2'-bpy)(2)(H(2)O)](2+) clusters via terminal oxo groups of the capping V atoms. Compound 2 is built on [PMo(VI)(8)V(IV)(6)O(42)[Cu(I)(phen)](2)](5-) clusters constructed from mixed-metal bicapped [PMo(VI)(8)V(IV)(6)O(42)](7-) subunits covalently bonded to two [Cu(phen)](+) fragments in the similar way to 1. The structure of 3 is composed of [PMo(VI)(9)Mo(V)(3)O(40)](6-) units capped by two divalent Ni atoms via four bridging oxo groups. The crystal data for these are the following: C(120)H(126)Co(6)Mo(16)N(24)O(103)P(2)V(16) (1), triclinic P1, a = 15.6727(2) A, b = 17.3155(3) A, c = 19.5445(2) A, alpha = 86.1520(1) degrees, beta = 81.2010(1) degrees, gamma = 63.5970(1) degrees, Z = 1; C(120)H(85)Cu(6-)Mo(8)N(20)O(44)PV(6) (2), triclinic P1, a = 14.565(4) A, b = 15.899(3) A, c = 16.246(4) A, alpha = 116.289(2) degrees, beta = 103.084(2) degrees, gamma = 94.796(2) degrees, Z = 1; C(60)H(40)Mo(12)N(10)Ni(3)O(40)P (3), monoclinic P2(1)/c, a = 14.804(3) A, b = 22.137(4) A, c = 25.162(5) A, alpha = 90 degrees, beta = 98.59(3) degrees, gamma = 90 degrees, Z = 4.     

Synthesis and characterization of [Mo(7)O(16)(O(3)PCH(2)PO(3))(3)]:(8-) a mixed-valent polyoxomolybdenum diphosphonate anion with octahedrally and tetrahedrally coordinated molybdenum

Two new compounds containing the title diphosphono-polyoxometalate anion and diprotonated ethylenediamine (enH(2)) or piperazine (ppzH(2)) countercations have been hydrothermally synthesized and structurally characterized ((enH(2))(4)[Mo(7)O(16)(O(3)PCH(2)PO(3))(3)].7H(2)O, triclinic, P(-)1, Z = 2, a = 10.3455(7) A, b = 13.136(1) A, and c = 20.216(3) A, alpha = 93.247(6) degrees, beta = 96.434(6) degrees, and gamma = 111.900(6) degrees; (ppzH(2))(4)[Mo(7)O(16)(O(3)PCH(2)PO(3))(3)].8H(2)O, triclinic, P(-)1, Z = 2, a = 13.255(2) A, b = 13.638(2) A, and c = 16.874(4) A, alpha = 93.20(2) degrees, beta = 101.27(2) degrees, and gamma = 105.87(1) degrees). The anion is a ring of three pairs of edge-sharing octahedra of Mo(V)O(6) (with Mo(V)-Mo(V) bonds) that share corners with each other. The diphosphonate groups connect the pairs at the periphery. The ring is "capped" by a tetrahedron of Mo(VI)O(4). According to magnetic measurements, the compounds are diamagnetic.     

Characterization and crystal structure of 2R-(-)-6-hydroxytremetone from Xenophyllum poposum (Phil.) V.A. Funk

2R-(-)-6-Hydroxytremetone (C13H14O3) is a bioactive metabolite isolated from Xenophyllum poposum (Phil.) V.A. Funk. (ex. Werneria poposa Phil.), a member of the Asteraceae. Various pharmacological properties attributed by popular medicine to benzofurane derivatives prompted their physical and chemical characterization. The obtained substance was characterized by melting point, optic rotation, ultraviolet spectrum, 1HRMN, 13CRMN, infrared spectroscopy, and thermo-analytical techniques. The molecular structure of 2R-(-)-6-hydroxytremetone was determined by single crystal X-rays diffraction methods. The substance crystallizes in the monoclinic space group P2(1) with a = 8.767(2) A, b = 5.423(1) A, c = 24.301(4) A, beta = 90.52(2) degrees , and two independent but very similar molecules of the same handedness per asymmetric unit (Z = 4). Both molecules have the phenyl ring and its attached oxydryl and methyl ketone groups nearly co-planar to one another and are stabilized by a strong OH ... Oketone intra-molecular bond (Ohydroxyl ... Oketone distances of 2.529 and 2.536 A; O-H ... Oketone angles of 146.4 and 143.9 degrees , respectively).     

Molecular structure and spectroscopic properties of N-methylmorpholine betaine complex with 4-hydroxybenzoic acid

Crystal structure of the 1:1 complex of N-methylmorpholine betaine (MMB) with 4-hydroxybenzoic acid (4-HBA) has been determined by X-ray diffraction. Crystals are orthorhombic, space group Pna2₁ with a=7.933(2), b=15.336(3), and Z=4, R=0.033. The acid molecule forms two O-H?O hydrogen bonds with two betaine molecules. The COOH group of the acid forms shorter hydrogen bond with betaine (2.587(2) Å), than the hydroxyl group (2.677(2) Å). The carbonyl oxygen atom of the acid also interacts with the methylene hydrogen atom of the betaine through C-H?O hydrogen bond (3.256(2) Å). Thus formed infinite chains parallel to the z axis are connected by other C-H?O hydrogen bonds into layers perpendicular to the x axis. The morpholine ring has a chair conformation with the methyl group in the equatorial position and CH₂COO⁻ group in the axial one. The powder FTIR and Raman spectra and semiempirical calculations of the isolated molecule confirm the structure of the complex investigated. The ¹H and ¹³C spectra indicate that in DMSO-d₆ solution, protons are not transferred from the acid to the betaine molecules.     

A monovacant heteropolytungstate thioderivative: Synthesis and characterization of [(PW11O39)2(H4Mo4S4O6)](10-) and related isomers

[(PW(11)O(39))(2)(Mo(4)S(4)O(4)(OH(2))(2))](10-) anions were obtained through the stereospecific addition of the [Mo(2)S(2)O(2)](2+) oxothiocation to the monovacant alpha-[PW(11)O(39)](7-) anion. K(10)[(PW(11)O(39))(2)(Mo(4)S(4)O(4)(OH(2))(2))].25H(2)O has been isolated as crystals and characterized by X-ray diffraction. The structure revealed a "sandwich-like" dimer of two alpha-[PW(11)O(39)](7-) subunits assembled by the noteworthy central cluster [H(4)Mo(4)S(4)O(6)]. The crystallization of the crude product produces an isomerically pure compound, which was characterized by (31)P and (183)W NMR. IR data were also supplied. In solution, the compound isomerizes, giving a second diastereoisomer. A kinetic experiment, carried out by (31)P NMR, allowed the conditions of the thermodynamic equilibrium to be determined. A structural relationship between the two isomers is proposed, fully consistent with NMR data. Cisoid and transoid isomers result in the relative disposition of each [PW(11)O(39)](7-) subunit, either staggered or eclipsed. An investigation of the formation of the [Mo(2)O(2)S(2)](2+) unit from the polycondensed cyclic precursor [Mo(10)S(10)O(10)(OH)(10)(H(2)O)(5)] and the aggregation process resulting in the oxothio [(PW(11)O(39))(2)(Mo(4)S(4)O(4)(OH(2))(2))](10-) compound has been undertaken. The studies were monitored by (31)P NMR and UV-vis spectroscopies. The reaction is quantitative in nearly stoichiometric conditions.     

Structural Transformations and adsorption of fuel-related gases of a structurally responsive nickel phosphonate metal-organic framework, Ni-STA-12

The structure of the nickel N,N'-piperazinebismethylenephosphonate, Ni-STA-12 (St. Andrews porous material-12), has been determined in the hydrated (Ni2L x 8 H2O, L = O3PCH2NC4H8NCH2PO3), partially dehydrated (Ni2L x 2 H2O), and fully dehydrated (Ni2L) forms from high-resolution synchrotron X-ray powder diffraction. The framework structures of Ni2L x 8 H2O and Ni2L x 2 H2O are almost identical (R, a = 27.8342(1) A, c = 6.2421(2) A; R, a = 27.9144(1) A, c = 6.1655(2) A) with additional physisorbed water of the as-prepared Ni-STA-12 present in an ordered hydrogen-bonded network in the channels. Ab initio structure solution of the fully dehydrated solid indicates it has changed symmetry to triclinic (P1, a = 6.03475(5) A, b = 14.9157(2) A, c = 16.1572(2) A, alpha = 112.5721(7) degrees, beta = 95.7025(11) degrees, gamma = 96.4950(11) degrees) as a result of a topotactic structural rearrangement. The fully dehydrated solid possesses permanent porosity with elliptical channels 8 A x 9 A in free diameter. The structural change results from the loss of water coordinated to the nickel cations, so that the nickel coordination changes from edge-sharing octahedral NiO5N to edge- and corner-sharing five-fold NiO4N. During this change, two out of three phosphonate groups rotate to become fully coordinated to nickel cations, leaving the remainder of the phosphonate groups coordinated to nickel cations by two oxygen atoms and with a P=O bond projecting into the channels. This transformation, which is completely reversible, causes substantial changes in both vibrational and electronic properties as shown by IR, Raman, and UV-visible spectroscopies. Complementary adsorption, calorimetric, and infrared studies of the probe adsorbates H2, CO, and CO2 reveal the presence of several distinct adsorption sites in the solid, which are attributed to their interactions with nickel cations which are weak Lewis acid sites, as well as with P=O groups that project into the pores. At 304 K, the adsorption isotherms and enthalpies of adsorption on dehydrated Ni-STA-12 have been measured for CO2 and CH4: Ni-STA-12 gives adsorption uptakes of CO2 of 2.5 mmol g(-1) at 1 bar, an uptake ca. 10 times that of CH4.     

Studies of dirhodium(II) tetra(trifluoroacetate). 5. Remarkable examples of the ambidentate character of dimethyl sulfoxide

The ambidentate character of dimethyl sulfoxide, already known for dirhodium carboxylates, has been remarkably manifested in new ways. Three novel complexes of dirhodium(II) tetra(trifluoroacetate) with the DMSO ligand, namely, [Rh2(O2CCF3)4]m(DMSO)n with m:n = 7:8 (1), 1:1 (2), and 3:2 (3), have been obtained by deposition from the vapor phase, and their crystal structures have been determined by X-ray crystallography. The crystallographic parameters are as follows: for 1, monoclinic space group P2(1)/c with a = 28.261(2) A, b = 16.059(4) A, c = 17.636(2) A, beta = 92.40(4) degrees, and Z = 2; for 2, triclinic space group P1 with a = 8.915(2) A, b = 10.592(2) A, c = 11.916(2) A, alpha = 84.85(1) degrees, beta = 88.86(1) degrees, and gamma = 65.187(8) degrees, and Z = 2; and for 3, triclinic space group P1 with a = 8.876(2) A, b = 9.017(2) A, c = 19.841(3) A, alpha = 101.91(2) degrees, beta = 97.144(8) degrees, gamma = 100.206(9) degrees, and Z = 1. In the oligomeric molecule of 1, six DMSO ligands bridge seven dirhodium tetra(trifluoroacetate) units in a bidentate fashion via S and O atoms, and two additional DMSO molecules terminate the chain. In the structure of the monoadduct Rh2(O2CCF3)4(DMSO) (2), the dirhodium blocks are bridged through the O atoms of DMSO ligands, forming a one-dimensional polymeric chain. Compound 3 also has an infinite chain structure with the molecules of dimethyl sulfoxide acting in a bidentate mu-DMSO-S,O mode. Every second DMSO molecule is missing in 3, so that two of every three Rh2(O2CCF3)4 units are associated through the O atoms of carboxylate groups to give the overall composition [Rh2(O2CCF3)4]3(DMSO)2.     

Computational investigation and hydrogen/deuterium exchange of the fixed charge derivative tris(2,4,6-Trimethoxyphenyl) phosphonium: Implications for the aspartic acid cleavage mechanism

Aspartic acid (Asp)-containing peptides with the fixed charge derivative tris(2,4,6trimethoxyphenyl) phosphonium (tTMP-P+) were explored computationally and experimentally by hydrogen/deuterium (H/D) exchange and by fragmentation studies to probe the phenomenon of selective cleavage C-terminal to Asp in the absence of a "mobile" proton. Ab initio modeling of the tTMP-P+ electrostatic potential shows that the positive charge is distributed on the phosphonium group and therefore is not initiating or directing fragmentation as would a "mobile" proton. Geometry optimizations and vibrational analyses of different Asp conformations show that the Asp structure with a hydrogen bond between the side-chain hydroxy and backbone carbonyl lies 2.8 kcal/mol above the lowest energy conformer. In reactions with D2O, the phosphonium-derived doubly charged peptide (H+)P+LDIFSDF rapidly exchanges all 12 of its exchangeable hydrogens for deuterium and also displays a nonexchanging population. With no added proton, P+LDIFSDF exchanges a maximum of 4 of 11 exchangeable hydrogens for deuterium. No exchange is observed when all acidic groups are converted to the corresponding methyl esters. Together, these H/D exchange results indicate that the acidic hydrogens are "mobile locally" because they are able to participate in exchange even in the absence of an added proton. Fragmentation of two distinct (H+)P+LDIFSDF ion populations shows that the nonexchanging population displays selective cleavage, whereas the exchanging population fragments more evenly across the peptide backbone. This result indicates that H/D exchange can sometimes distinguish between and provide a means of separation of different protonation motifs and that these protonation motifs can have an effect on the fragmentation.     

Comprehensive conformational analysis of the nucleoside analogue 2'-beta-deoxy-6-azacytidine by DFT and MP2 calculations

A comprehensive conformational analysis of isolated 2'-beta-deoxy-6-azacytidine (d6AC), an analogue of therapeutically active 6-azacytidine (6AC), has been performed by means of ab initio calculations at the MP2/6-311++G(2df,pd)//DFT B3LYP/6-31G(d,p) level of theory. Among the 81 conformers located within a 7.83 kcal/mol Gibbs energy range at T = 298.15 K, 38 contain syn-oriented bases with respect to 2'-deoxyribose; the other conformers include anti-oriented bases. Energetic analysis of these conformers shows that conformational equilibrium of isolated d6AC at T = 298.15 K is shifted to syn conformation with a syn/anti ratio estimated as 61.4%:38.6%. As far as the sugar conformation is concerned, 40 conformers contain north (N) (with 0.3 degrees < or = P < or = 40.1 degrees), and the rest possess south (S) (with 157.1 degrees < or = P < or = 207.0 degrees) puckers, where P is the pseudorotational angle of the furanose ring. The S/N occupancy ratio is estimated as 80.2%:19.8% (T = 298.15 K). The two most stable conformers are energetically quasidegenerate and correspond to both C2'-endo/syn conformers differing only by orientation of the O3'H hydroxyl group. They are both stabilized by means of similar intramolecular H-bonds, i.e., O5'H...O2, C2'H2...O2, and C2'H2...O5'. As examined by AIM criteria, from 1 to 3 H-bonds per conformer were identified among 13 possible interactions: O5'H...O2, O5'H...N6, O3'H...O5', O5'H...O3', C1'H...O2, C2'H2...O2, C2'H2...O5', C3'H...O2, C3'H...N6, C5'H1...O2, C5'H2...O2, C5'H1...N6, and C5'H2...N6. The biological effect of d6AC is conceived as an inhibition of replicative DNA polymerase caused by an unusual orientation of the sugar residue against the base in the only A form DNA-like conformer.     

Solid-state synthesis of monazite-type compounds containing tetravalent elements

On the basis of optimized grinding/heating cycles developed for several phosphate-based ceramics, the preparation of brabantite and then monazite/brabantite solid solutions loaded with tetravalent thorium, uranium, and cerium (as a plutonium surrogate) was examined versus the heating temperature. The chemical reactions and transformations occurring when heating the initial mixtures of AnO2/CeO2, CaHPO(4).2H2O (or CaO), and NH4H2PO4 were identified through X-ray diffraction (XRD) and thermogravimetric/differential thermal analysis experiments. The incorporation of thorium, which presents only one stabilized oxidation state, occurs at 1100 degrees C. At this temperature, all the thorium-brabantite samples appear to be pure and single phase as suggested by XRD, electron probe microanalyses, and micro-Raman spectroscopy. By the same method, tetravalent uranium can be also stabilized in uranium-brabantite, i.e., Ca0.5U0.5PO4, after heating at 1200 degrees C. Both brabantites, Ca0.5Th0.5PO4 and Ca0.5U0.5PO4, begin to decompose when increasing the temperature to 1400 and 1300 degrees C, respectively, leading to a mixture of CaO and AnO2 by the volatilization of P4O10. In contrast to the cases of thorium and uranium, cerium(IV) is not stabilized during the heating treatment at high temperature. Indeed, the formation of Ca0.5Ce0.5PO4 appears impossible, due to the partial reduction of cerium(IV) into cerium(III) above 840 degrees C. Consequently, the systems always appear polyphase, with compositions of CeIII1-2xCeIVxCaxPO4 and Ca2P2O7. The same conclusion can be also given when discussing the incorporation of cerium(IV) into La1-2xCeIIIx-yCeIVyCay(PO4)1-x+y. This incomplete incorporation of cerium(IV) confirms the results obtained when trying to stabilize tetravalent plutonium in Ca0.5PuIV0.5PO4 samples.