Mechanistic studies with positive iodine: Kinetics of oxidation of thiocyanate ion by iodine monochloride and aqueous iodine in perchloric acid medium

Kinetics of oxidation of thiocyanate ion (NCS^?) by iodine monochloride and iodine has been studied in aqueous perchloric acid medium. The rates of oxidations followed the rate laws: Variations in ionic strength and dielectric constant of the medium had little effects on the rates of reactions with both the oxidants. Mechanisms consistent with the observed rate laws have been suggested. Rate limiting steps have been identified and the constants of some of these steps have been evaluated by varying [NCS^?] at each temperature. Activation parameters were computed from the Arrhenius plots. The rate constants predicted from the rate law as [NCS^?], and [H⁺], varied in iodine monochloride oxidation, are in good agreement with the experimental values providing support to the proposed mechanism.     

Reduction of iodine by hydroxylamine within the pH range 0.7–3.5

The reduction of iodine by hydroxylamine within the [H⁺] range 3×10⁻¹–3×10⁻⁴ mol.L⁻¹ was first studied until completion of the reaction. In most cases, the concentration of iodine decreased monotonically. However, within a narrow range of reagent concentrations ([NH₃OH⁺]₀/[I₂]₀ ratio below 15, [H⁺] around 0.1 mol.L⁻¹, and ionic strength around 0.1 mol.L⁻¹), the [I₂] and [I₃⁻] vs. time curves showed 2 and 3 extrema, respectively. This peculiar phenomenon is discussed using a 4 reaction scheme (I₂+I⁻⇔︁I₃⁻, 2 I₂+NH₃OH⁺+H₂O→HNO₂+4 I⁻+5 H⁺, NH₃OH⁺+HNO₂→N₂O+2 H₂O+H⁺, and 2 HNO₂+2 I⁻+2 H⁺→2 NO+I₂+2 H₂O). In a flow reactor, sustained oscillations in redox potential were recorded with an extremely long period (around 24 h). The kinetics of the reaction was then investigated in the starting conditions. The proposed rate equation points out a reinforcement of the inhibition by hydrogen ions when [H⁺] is above 4×10⁻² mol.L⁻¹ at 25°C. A mechanism based on ion-transfer reactions is postulated. It involves both NH₂OH and NH₃OH⁺ as the reducing reactive species. The additional rate suppression by H⁺ at low pH would be connected to the existence of H₂OI⁺ in the reactive medium. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 785–797, 1998     

Kinetics and mechanism of oxidation of thiocarbohydrazide in the free state and in its metal complex and thiocarbohydrazone by chloramine-T and dichloramine-T

Kinetics of oxidation of thiocarbohydrazide (TCH) in the free state and as its metal complex, and as a hydrazone by chloramine-T (CAT) in aqueous HClO₄ medium, and by dichloramine-T (DCT) in 1:1 (v/v) water-methanol medium in the presence of HClO₄ have been studied. Rates of oxidation of TCH in the free state and in metal complex by CAT were determined. The rate law for the oxidation of TCH at high [H⁺ ] and for complex oxidations were identical to that for CAT oxidations. The conversion of TCH into its hydrazone changed the order in [H⁺] from a positive to a negative value, probably signalling the change of reaction site. The rate law for oxidation under these conditions was determined. Addition of the reduced product of the oxidants had no effect on the rate of oxidations. Variation in ionic strength of the medium had little positive effect, while decrease in dielectric constant of the medium decreased the rate in both the oxidations. Oxidation processes generally follow a Michaelis-Menten type of mechanism. Constants of the rate limiting steps have been calculated at different temperatures and these constants have been used to calculate the activation parameters from the Arrhenius plots. The proposed mechanisms are supported by investigations with HOC1 under identical reaction conditions. Metal complexation of the substrate decreased the reactivity, while conversion of TCH into its hydrazone changed the rate dependence on [H⁺].     

Investigations on the amalgamation of gold nanorods by iodine and the detection of tetracycline

The morphological transformation process of gold nanorods (Au-NRs) resulting from the reaction between tetracycline and iodine was monitored by the plasmon resonance absorption (PRA) spectra and the scanning electron microscope (SEM) images. It was found that iodine could fuse Au-NRs into sphericity with the lower aspect ratio and blue shift of the longitudinal PRA band. It was found, however, that the presence of tetracycline, since it can react with I₂, decreases the effective concentration of I₂ and its fusion effect on Au-NRs. As a result, the longitudinal PRA of Au-NRs shifts to longer wavelength linearly with increasing the concentration of tetracycline. With that, tetracycline can be detected in the range of 5.0×10^∮5- 5.0×10⁻⁴ mol·L⁻¹, with a limit of determination (LOD) of 2.4×10⁻⁶ mol·L⁻¹ (3σ). Most foreign substances in the samples did not interfere in the detection, and tetracycline in the synthetic samples could be detected with the recovery in the range of 92.8%–107.2%, and RSD lower than 4.3%. The concentration of tetracycline in milk detected with standard addition method was so low that it accorded with the safety regulation. Supported by the National Natural Science Foundation of China (Grant Nos. 30570465 and 20425517)     

Equilibrium,kinetics, and mechanism of the malonic acid–iodine reaction

The equilibrium constant for the reaction CH₂(COOH)₂ + I₃^? ? CHI(COOH)₂ + 2I^? + H⁺, measured spectrophotometrically at 25°C and ionic strength 1.00M (NaClO₄), is (2.79 ± 0.48) × 10^?4M². Stopped-flow kinetic measurements at 25°C and ionic strength 1.00M with [H⁺] = (2.09-95.0) × 10^?3M and [I^?] = (1.23-26.1) × 10^?3M indicate that the rate of the forward reaction is given by (k₁[I₂] + k₃[I₃^?]) [HOOCCH₂COO^?] + (k₂[I₂] + k₄[I₃^?]) [CH(COOH)₂] + k₅[H⁺] [I₃^?] [CH₂(COOH)₂]. The values of the rate constants k₁-k₅ are (1.21 ± 0.31) × 10², (2.41 ± 0.15) × 10¹, (1.16 ± 0.33) × 10¹, (8.7 ± 4.5) × 10^?1M^?1·sec^?1, and (3.20 ± 0.56) × 10¹M^?2·sec^?1, respectively. The rate of enolization of malonic acid, measured by the bromine scavenging technique, is given by k_en[CH₂(COOH)₂], with k_en = 2.0 × 10^?3 + 1.0 × 10^?2 [CH₂(COOH)₂]. An intramolecular mechanism, featuring a six-member cyclic transition state, is postulated to account for the results on the enolization of malonic acid. The reactions of the enol, enolate ion, and protonated enol with iodine and/or triodide ion are proposed to account for the various rate terms.     

Kinetics and mechanism of the iodine oxidation of hydroxylamine

Studies of the stoichiometry and kinetics of the reaction between hydroxylamine and iodine, previously studied in media below pH 3, have been extended to pH 5.5. The stoichiometry over the pH range 3.4–5.5 is 2NH₂OH + 2I₂ = N₂O + 4I^? + H₂O + 4H⁺. Since the reaction is first-order in [I₂] + [I₃^?], the specific rate law, k₀, is k₀ = (k₁ + k₂/[H⁺]) {[NH₃OH⁺]₀/(1 + K_p[H⁺])} {1/(1 + K_I[I^?])}, where [NH₃OH⁺]₀ is total initial hydroxylamine concentration, and k₁, k₂, K_p, and K_I are (6.5 ± 0.6) × 10⁵ M^?1 s^?1, (5.0 ± 0.5) s^?1, 1 × 10⁶ M^?1, and 725 M^?1, respectively. A mechanism taking into account unprotonated hydroxylamine (NH₂OH) and molecular iodine (I₂) as reactive species, with intermediates NH₂OI₂^?, HNO, NH₂O, and I₂^?, is proposed.     

芳基四硫富瓦烯与碘电荷转移复合物的合成及其晶体结构

采用缓慢挥发溶剂的方法合成了硫原子桥联芳基取代四硫富瓦烯（Ar-S-TTF）与碘的3种电荷转移复合物（1^+·）（I₃）·I₂、（2^+·）（I₅）·I₂和（3²⁺）（I₃）₂,采用单晶X射线衍射、紫外可见光谱、循环伏安对其进行了表征。复合物（1^+·）（I₃）·I₂为C2/c空间群,1^+·呈椅式构型。化合物1与碘之间在溶液中和复合物中电荷转移一致。复合物（2^+·）（I₅）·I₂为P1空间群,2^+·呈椅式构型。复合物（3²⁺）（I₃）₂为Pbca空间群,3²⁺呈独特的平面构型。化合物2和3与碘之间在溶液中和复合物中呈现不同的电荷转移。复合物中聚碘阴离子呈现不同的堆积结构：由I₃^-或I₅^-/I₂组成的一维链状和I₃^-/I₂组成的二维网格状。     

Study of valence state of iodine in simulated fuel solution of medical isotope production reactor

The effects of temperature, heating-time, concentration of HNO₃ and γ-ray irradiation on the valence states of iodine in a simulated fuel solution of a medical isotope production reactor (MIPR) were investigated. About 83% of I⁻ was oxidized to IO₃ ⁻ and 10% of I⁻ was oxidized to I₂ in uranyl nitrate solution after heating at 70 °C for 6 hours. Heating and existence of oxidant, U and ionizing radiation accelerate the oxidation process of iodine, and results in most of the iodine being produced in high oxidation states such as in IO₃ ⁻ and IO₄ ⁻. The results indicate that the production of ¹³¹I by MIPR can be carried out by extraction of iodine in high oxidation states from the fuel solution.     

芳基四硫富瓦烯与碘电荷转移复合物的合成及其晶体结构

采用缓慢挥发溶剂的方法合成了硫原子桥联芳基取代四硫富瓦烯(Ar-S-TTF)与碘的3种电荷转移复合物(1^+·)(I₃)·I₂、(2^+·)(I₅)·I₂和(3²⁺)(I₃)₂,采用单晶X射线衍射、紫外可见光谱、循环伏安对其进行了表征。复合物(1^+·)(I₃)·I₂为C2/c空间群,1^+·呈椅式构型。化合物1与碘之间在溶液中和复合物中电荷转移一致。复合物(2^+·)(I₅)·I₂为P1空间群,2^+·呈椅式构型。复合物(3²⁺)(I₃)₂为Pbca空间群,3²⁺呈独特的平面构型。化合物2和3与碘之间在溶液中和复合物中呈现不同的电荷转移。复合物中聚碘阴离子呈现不同的堆积结构：由I₃^-或I₅^-/I₂组成的一维链状和I₃^-/I₂组成的二维网格状。     

The kinetics of the reaction of iodine with hydrazine as studied by pulse radiolysis

Pulse radiolysis was utilized to study the iodine — hydrazine reaction in aqueous solutions of pH3 to 7, at I^– concentrations of 0.02 to 0.34M, and a constant ionic strength of 0.35M. The reaction rate was found to be proportional to [H⁺]^–1 and [I^–]^–1. Experimental results support the assumption that the rate-determining step is the reaction of I₂ with N₂H₄ with a rate constant K1.2×10⁷ M^–1s^–1.     

Determination of the chemical forms of iodine with IC-ICP-MS and its application to environmental samples

An online analytical system using ion chromatography (IC) followed by inductively coupled plasma mass spectrometry (ICP-MS) was developed for the separate determination of I⁻ and IO₃⁻ in aqueous solutions with a detection limit 0.1–1 μg 1/1. The total iodine concentration was also directly determined by ICP-MS. Iodine in several environmental samples (i.e., rain, river water, brine, and soil solution) was successfully determined with information on its chemical form. The release of I⁻ into soil solution with decreasing Eh was observed in an incubation experiment with flooded soil. An iodine form other than I⁻ and IO₃⁻ was observed in several environmental samples.     

Coordination polymers and a dinuclear complex constructed from zinc(II) ions and fluorescein: iodine adsorption and optical properties

Abstract

1-D coordination polymers, ¹_∞[Zn(fl)₂]·2EtOH and ¹_∞[Zn(fl)₂]·2MeOH, and a dinuclear complex, [{Zn(fl)₂}₂(dienpip)]·4H₂O·4EtOH (dienpip?= N,N′-bis(2-aminoethyl)piperazine), were obtained using Zn(II) ions and fluorescein anions (fl). Thermal analysis shows stability of the polymers after solvent removal up to more than 400?°C. Crystallization solvent molecules were removed under reduced pressure with the preservation of the polymeric structure, ¹_∞[Zn(fl)₂]. Desolvated crystals were exposed to I₂ vapors and the crystal structure determination by X-ray diffraction confirmed the presence of I₂ molecules in the channels generated in crystals by the metal-organic framework. The iodine content, evaluated by X-ray diffraction, corresponds to the overall formula ¹_∞[Zn(fl)₂]·0.3I₂. The optical properties of the coordination polymers and the dinuclear complex have been investigated.     

Mechanistic investigation of the oxidation of vitamin B1 with sodium N-chlorobenzenesulfonamide in presence of ruthenium(III) catalyst in hydrochloric acid medium: a kinetic approach

The oxidative cleavage of vitamin B₁ (thiamine hydrochloride, THM) with sodium N-chlorobenzenesulfonamide (chloramine-B, CAB) has been kinetically investigated in HCl medium in presence of ruthenium(III) catalyst at 308 K. The oxidation reaction follows the rate law, −d[CAB]/dt = k [CAB] [Ru(III)] [H⁺] [THM]^a [Cl⁻]^b, where a and b are less than unity. Variation of ionic strength of the medium and addition of the reaction product, benzenesulfonamide (BSA) had no significant effect on the reaction rate. The change in relative permittivity of the medium affected by changing the solvent composition with acetonitrile has been studied. The stoichiometry of the reaction was found to be 1:1, and N-[(4-amino-2-methylpyrimidine-5-yl)methyl]benzensulfonamide and 2-(4-methylthiazol-5-yl)ethanol were identified as the oxidation products of vitamin B₁. The reaction constants involved in the mechanism were computed. The reaction was studied at different temperatures and the overall activation parameters have been evaluated. C₆H₅SO₂NHCl has been postulated as the reactive oxidizing species. The observed results have been explained by plausible mechanisms and the relative rate laws have been deduced. Correspondence: Kikkeri Narasimhasetty Mohana, Department of Studies in Chemistry, University of Mysore, Manasagangotri, Mysore 570 006, India.     

Speciation of the Vanadium (III) Complexes with 6-Methylpicolinic Acid,Salicylic Acid and Phthalic Acid

The complex species formed in aqueous solutions (25 °C, I=3.0 mol⋅dm⁻³ KCl ionic medium) between the V(III) cation and the ligands 6-methylpicolinic acid (MePic, HL), salicylic acid (H₂Sal, H₂L) and phthalic acid (H₂Phtha, H₂L) have been studied by potentiometric and spectrophotometric measurements. Application of the least-squares computer program LETAGROP to the experimental emf(H) data, taking into account the hydrolytic species and hydrolysis constants of V(III), indicates that under the employed experimental conditions the complexes [VL]²⁺, [V(OH)L]⁺, [V(OH)₂L], [V(OH)₃L]⁻, [VL₂]⁺, [VL₃] and [V₂OL₄] form in the vanadium(III)–MePic system. Were observed the complexes [VL]⁺, [VL₂]⁻, [V(OH)L₂]²⁻ and [VL₃]³⁻ in the vanadium(III)–H₂Sal system, and the species [VHL]²⁺, [VL]⁺, [V(OH)L], [VHL₂], [VL₂]⁻, [V(OH)L₂]²⁻, [V(OH)₂L₂]³⁻ and [VL₃]³⁻ in the vanadium(III)–H₂Phtha system. The stability constants of these complexes were determined by potentiometric measurements, and spectrophotometric measurements were made in order to perform a qualitative characterization of the complexes formed in aqueous solution.     

Thermodynamic Protonation Parameters of some Sulfur-Containing Anions in NaCl<Subscript>aq</Subscript> and (CH<Subscript>3</Subscript>)<Subscript>4</Subscript>NCl<Subscript>aq</Subscript> at <Emphasis Type="Italic">t</Emphasis>=25 °C

Protonation constants of one thiocarboxylate (thioacetate) and four sulfur-containing carboxylates (2-methylthioacetate, thiolactate, thiomalate, 3-mercaptopropionate) were determined by potentiometric measurements in a wide ionic strength range [0≤I≤5 mol⋅L⁻¹ in NaCl and 0 ≤I≤3 mol⋅L⁻¹ in (CH₃)₄NCl] at t=25 °C. For two of these ligands (2-methylthioacetate and thiolactate), the protonation enthalpies were also determined by calorimetric measurements in NaCl ionic medium [0 ≤I≤5 mol⋅L⁻¹] at t=25 °C. Individual UV spectra of the protonated and unprotonated 3-mercaptopropionate species, together with values of the protonation constants, were obtained by spectrophotometric titrations. Results were analyzed in terms of their dependence on the ionic medium by using different thermodynamic models [Debye-Hückel type, SIT (Specific ion Interaction Theory) and Pitzer’s equations]. Differences among protonation constants obtained in different media were also interpreted in terms of weak complex formation.     

The Effect of Temperature on the Equivalent Conductivities and Ion-Association Constants of Some Tris-(ethylenediamine)chromium(III) Complexes in N,N-dimethylformamide and N,N-dimethylacetamide

The equivalent conductivities of tris-(ethylenediamine)chromium complexes, [Cr(en)₃]X₃ (where X⁻= Cl⁻, Br⁻, I⁻; en = ethylenediamine) were measured as functions of temperature (278.15 to 328.15 K) and concentration [(1.948 ×10⁻⁴ to 10.728 ×10⁻⁴ mol⋅dm⁻³) and (2.282 ×10⁻⁴ to 11.246 ×10⁻⁴ mol⋅dm⁻³)] in N,N-dimethylformamide (DMF) and N,N-dimethylacetamide (DMAC), respectively. Equivalent conductivity values for [Cr(en)₃]X₃ in DMF were found to be higher than those in DMAC. The conductivity data were analyzed with the Robinson-Stokes equations. For [Cr(en)₃]X₃, the limiting equivalent ionic conductivities of [Cr(en)₃]³⁺ and the ion-association constants (K _A) of the ion-pair between [Cr(en)₃]³⁺ and the monovalent halide anions were determined in DMF and DMAC. The values of K _A for three complex salts in DMF were higher than those in DMAC. This can be ascribed to an increase of the ion-association constants with a decrease of the relative permittivity of the solvents. The values of K _A at 298.15 K decreased in the order Cl⁻> Br⁻> I⁻ in DMF and Cl⁻> I⁻> Br⁻ in DMAC. The K _A values for [Cr(en)₃]Cl₃ increased with increasing temperature in both DMF and DMAC. For [Cr(en)₃]X₃(X⁻= Br⁻, I⁻) in both solvents, this indicates increasing disorder occurs with increasing temperature. Thermodynamic parameters (standard Gibbs energy, enthalpy and entropy changes) were determined from the temperature dependence of K _A in DMF and DMAC. These parameters were inter-compared in their dependences on temperature and solvent.     

Synthesis and Structure of Phosphorus-Containing Complexes [Ph4P]

Complexes [Ph₄P] ₂ ⁺ [Hg₄I₁₀]²⁻ (I) and [[Ph₄P] ₂ ⁺ [BiI₅(Me₂S=O)]²⁻ (II) are synthesized by the reactions of tetraphenylphosphonium Ph₄PI with mercury diiodide in acetone and with bismuth triiodide in dimethyl sulfoxide, respectively. According to X-ray diffraction analysis, structural units of these complexes are tetraphenylphosphonium cations and tetra- and mononuclear anions, respectively. The phosphorus atoms in the tetraphenylphosphonium cations have a distorted tetrahedral coordination. In the central fragment of the centrosymmetric anion [Hg₄I₁₀]²⁻, the distances between the terminal mercury atoms and iodine atoms are 3.503(2) Å. The mercury atoms in the central and terminal fragments of compound I have distorted tetrahedral and trigonal coordinations, respectively. The bismuth atom in the mononuclear octahedral anion of complex II contains a dimethyl sulfoxide molecule along with five iodine atoms in the coordination sphere. __________ Translated from Koordinatsionnaya Khimiya, Vol. 31, No. 10, 2005, pp. 791–795. Original Russian Text Copyright ? 2005 by Sharutin, Egorova, Sharutina, Dorofeeva, Molokov, Fukin.     

Crystal and molecular structure of diphenyliodonium triiodide

A new salt diphenyliodonium triiodide (C₁₂H₁₀I₄) was obtained. The [C₁₂H₁₀I⁺][I₃⁻] compound was isolated as red brown crystals and studied by single-crystal X-ray diffraction. The structure of diphenyliodonium triiodide consists of separate, virtually linear I₃⁻ anions and C₁₂H₁₀I⁺ cations. Strong intermolecular anion-anion (I₃⁻…I₃⁻) and anion-cation (I₃⁻…I⁺) interactions in the crystal structure leads to a change in the symmetry of triiodide ions. The complex formation in the system organic cation iodide-elementary iodine was studied by spectrophotometry. The complex composition was found (1: 1), and the stability constant of the complex in chloroform was determined (loggB = 3.91).     

Zn|ZnI2| iodine secondary galvanic cells using iodine adducts of nylon-6 and other polymers as positive electrodes

Zn|ZnI₂| iodine galvanic cells using carbon plate electrodes coated with polymer + carbon powder mixtures are rechargeable with minor self-discharge when a positive ion exchanging film is used as the separator. Among the polymers tested (nylon-6, Poly(tetrahydrofuran), poly(acrylonitrile), poly(methly methacrylate), poly(vinly Alcohol), poly(N-vinylpyrrolidone), and poly(4-vinylpridine)), nylon-6 and poly(tetrahydrofuran) have the highest ability to absorb iodine and afford secondary galvanic cells showing the best rechargeability: the secondary galvanic cells are rechargeable more than 500 times with about 100% current efficiency and 81–83% energy efficiency when charged and discharged at 2 mA/cm² at 25°C. The average charging and discharging voltages of the secondary cell using nylon-6 are 1.42 and 1.18 V, respectively. The cell prepared by using nylon-6 generates about 80 mA/cm² of an initial short-circuit current and 0.3–80 mA/cm² of a steady-state short-circuit current when the cell is dipped into a aqueous solution containing I^?₃. The steady-state short-circuit current increases with increasing I^?₃ concentration and a linear correlation holds between the logarithm of the steady-state short-circuit current and the logarithm of [I^?₃] in the range of [I^?₃] = 0.05–0.5 mol/1.     

A fluorescent sensing membrane for iodine based on intramolecular excitation energy transfer of anthryl appended porphyrin

A single anthryl appended meso-tetraphenylporphyrin (TPP) dyad has been synthesized and applied in fluorescence sensing of iodine based on the intramolecular excitation energy transfer. The molecular recognition of the sensor is based on the interaction of iodine with inner anthracene moiety of the dyad, while the signal reporter for the recognition process is the TPP fluorescence quenching. Because the emission spectrum of anthracene is largely overlapped with the Soret band absorption of TPP, intramolecular excitation energy transfer interaction occurs between the donor, anthracene and acceptor, TPP. This energy transfer leads to TPP fluorescence emission by excitation of anthracene. The sensor was constructed by immobilizing the dyad in a plasticized poly(vinyl chloride) (PVC) membrane. The sensing membrane shows higher sensitivity compared to the sensors by using anthracene, TPP, or a mixture of anthracene and TPP as sensing materials. Under the optimum conditions, iodine in a sample solution can be determined from 2.04 to 23.6 mmol·L⁻¹ with a detection limit of 33 nmol·L⁻¹. The sensing membrane shows satisfactory response characteristics including good reproducibility, reversibility and stability, as well as the short response time of less than 60 s. Except for Cr₂O₇²⁻ and MnO₄⁻, other common metal ions and anions in foodstuff do not interfere with iodine determination. The proposed method was applied in the determination of iodine in table salt samples. The results agree well with those obtained by other methods. Supported by the National Outstanding Youth Science Foundation of China (Grant No. 20525518), the National Natural Science Foundation of China (Grant No. 20775005), and the National Natural Science Foundation of Hunan province (Grant No. JJ076021)