Hybrid photonic crystal 1.31/1.55 μm wavelength division multiplexer based on coupled line defect channels

The objective of this paper is to investigate the implementation of a hybrid photonic crystal (PhC) 1.31/1.55 μm wavelength division multiplexer (WDM) and wavelength channel interleaver with channel spacing of roughly 0.8 nm between the operating wavelengths of 1.54-1.56 μm. It is based on 1-D photonic crystal (PhC) structure connected with an output 2-D PhC structure. The power transfer efficiency of the hybrid PhC WDM at 1.31 μm and 1.55 μm were computed by eigen-mode expansion (EME) method to be about 88% at both the wavelengths. The extinction ratios obtained for the 1.31 μm and 1.55 μm wavelengths are − 25.8 dB and − 22.9 dB respectively.     

New version of seven wavelengths demultiplexer based on the microcavities in a two-dimensional photonic crystal

A new two dimensional photonic crystal demultiplexer of wavelength (WDM) is designed by exploiting two Fabry–Pérot reflectors at the end of the bus waveguides. The results show that the light with different wavelengths can be successfully filtered to different ports by setting different radius of the center defect rods in the drop waveguides and high drop efficiency can be achieved by means of reflection feedbacks. The proposed filter has a cross section equal to 9.7 μm × 5.8 μm. In the designed filter, an improvement of the number of channels has been achieved. The normalized transmission spectra of this component have been studied using finite difference time domain (FDTD) method. The important parameters consider for this studies are radius of rods used in Fabry–Pérot reflectors, and radius of center defect rods in the drop waveguides. The demultiplexer we designed can easily separate the light with seven different wavelengths simultaneously. The scope of this paper lies on demultiplexer for communication systems around 1.55-μm wavelength.     

WDM and DWDM optical filter based on 2D photonic crystal Thue–Morse structure

This paper describes elaboration of two dimensional photonic crystal structures based on Thue–Morse sequence. Our results establish that the optical properties of these aperiodic multilayer systems can be tailored by adjusting either the radius of some cells of the proposed structure or defect characteristics. We introduce a resonant cavity in the proposed structure to select desirable wavelengths for filtering. Bandwidth of selected wavelengths are about 1 nm and suitable for communication applications. Also, our simulations show that efficiency of the proposed structure is enough. The total footprint of proposed filter is 331.24 μm², therefore it is suitable to be integrated in all optical chips.     

Bending dual-core photonic crystal fiber coupler

In this paper, we systematically study a designed structure of a bending dual-core photonic crystal fiber (PCF). We propose the controllable wavelength-selective coupling PCF. This coupler allows highly accurate control of the filtering wavelength. The different wavelengths can be selected by controlling the bending radius of the fiber. Coupling characteristics of novel bending wavelength-selective coupling PCF are evaluated by using a vector finite element method and their application to a multiplexer demultiplexer (MUX–DEMUX) based on the novel coupler is investigated. When the fiber length is 4168 μm, the bending radius of PCF couplers for 1.48/1.55 μm, 1.3/1.55 μm, 0.98/1.55 μm, and 0.85/1.55 μm is calculated, respectively, and the beam propagation analysis is performed. Different from the traditional wavelength-selective coupling PCF, the dual-core PCF is bent and it can realize the separation of multiple wavelengths.     

A new design of tunable four-port wavelength demultiplexer by photonic crystal ring resonators

A four-channel wavelength demultiplexer based on photonic crystal ring resonators (PCRR), which can be used for photonic integrated circuits, is designed. Dropping efficiency and Q factor of single improved ring are 100% and 842, respectively. In order to achieve the structure of demultiplexer, three improved rings have been used, that every ring has an individual inner rod radius; it means that each ring has a varying resonant wavelength. The results of simulation using finite-difference time-domain (FDTD) method in our proposed structure reveals an average transmitted power higher than 90% for each output port, Channel spacing is about 8 nm and bandwidth for each individual channel is about 2.8 nm. The mean value of the crosstalk between output channels and the area of the proposed structure are about −29 dB and 317 μm², respectively. By changing the radius of inner rods, various wavelengths can be chosen, therefore this device is tunable.     

Defect assisted subwavelength resolution in III-V semiconductor photonic crystal flat lenses with n = −1

We propose a III-V semiconductor photonic crystal slab designed to operate as a n = −1 superlens at λ₀ = 1.55 μm. The structure consists of air holes arranged in a two-dimensional triangular lattice, of period a, nanopatterned in an InP/InGaAsP/InP slab. Exploiting the second pass-band regime (a/λ₀ ∼ 0.31), subwavelength resolutions as low as 0.38λ₀ for planar lenses have been obtained by the insertion of hexagonal nanocavities within the crystal.     

An ultra compact photonic crystal wavelength division demultiplexer using resonance cavities in a modified Y-branch structure

An ultra small size 4-channel wavelength division demultiplexer based on 2D photonic crystal modified Y-Branch, suitable for integration, is proposed in this paper. The output wavelengths of designed structure can be tuned for communication applications (around 1550 nm) by choosing suitable defect parameters in the corner of each resonance cavity and output waveguides. The cross section of the structure is 313.28 μm² (17.8 μm × 17.6 μm) and desirable for integration based on popular planar technology. The bandwidth of each channel is near to 1 nm and the channel spacing is approximately 3.5 nm and wavelengths of demultiplexer channels are 1548.8 nm, 1551.9 nm, 1555.4 nm and 1559.3 nm respectively. Also, the crosstalk is between −33.1855 dB and −10.4947 dB. Furthermore, the mean values of the crosstalk and quality factor are −22.54 dB and 1496.7 respectively.     

Highly nonlinear birefringent photonic crystal fiber

We propose an index guiding highly nonlinear birefringent photonic crystal fiber (PCF). Using a full vectorial finite element method (FEM), we investigate the key propagation characteristics of the proposed design. We demonstrate that it is possible to design a simple PCF structure configuration with a birefringence in the order of 10⁻² and a nonlinear coefficient of 49 W⁻¹ km⁻¹ at the wavelength of 1.55 μm. It is demonstrated that two zero dispersion wavelengths can be achieved by the proposed design. Bending analysis and fabrication issues are also discussed thoroughly.     

Dense wavelength division demultiplexing using photonic crystal waveguides based on cavity resonance

We demonstrated a photonic crystal waveguide based dense wavelength division multiplexing device using the resonances in the cavities. The demultiplexing is achieved through filtering. This filtering is achieved by varying the radii of the surrounding holes of the cavity, which in turn changes the resonant wavelength of the cavity. The four wavelengths demultiplexed in the design are 0.8 nm apart in the optical region centered on 1.55 and 1.56 μm. The device designed and simulated has easy to realize structure as well as high quality factor. Two-dimensional Finite Difference Time Domain (FDTD) is chosen to do the simulation of this work.     

Supercontinuum generation by nanosecond dual-pumping near the two zero-dispersion wavelengths of a photonic crystal fiber

Supercontinuum generation by dual-wavelength nanosecond pumping in the vicinity of both zero-dispersion wavelengths of a photonic crystal fiber (PCF) is experimentally demonstrated. It is shown in particular that two pumps at 1535 nm and 767 nm simultaneously pumping near the two zero-dispersion wavelengths of a specially designed PCF yields a combined visible and infrared supercontinuum spectrum spanning from 0.55 μm to 1.9 μm. We discuss the generation mechanisms underlying the continuum formation in terms of modulation instability and cascaded Raman generation.     

Characteristics analysis of extruded elliptical hole photonic crystal fibers with square air-core

An extruded elliptical hole photonic crystal fibers PCF with square air-core is proposed. By using a full vector finite-element method FV-FEM and anisotropic perfectly matched layers APML, the structure and optical properties of the proposed PCF are analyzed. Simulation results show that the birefringence of the proposed photonic crystal fiber can be up to the order of 10⁻², and has a flattened dispersion from 1.20 μm to 1.80 μm. The proposed PCF may have important application in super-continuum SC generation, dispersion compensation, fiber-optic sensing systems and other aspects.     

Ultra-wideband single-polarization single-mode, high nonlinearity photonic crystal fiber

We report a novel design of photonic crystal fiber (PCF) with a rectangular array of four closely-spaced, highly elliptical air holes in the core region and a circular-air-hole cladding. The proposed PCF is able to support ultra-wideband single-polarization single-mode (SPSM) transmission from the visible band to the near infrared band. With the aid of the inner cladding formed by the central air holes, one polarization of the fundamental mode can be cut off at very short wavelengths and ultra-wideband SPSM propagation can be achieved. The inner cladding also suppresses the higher order modes and allows large air filling fraction in the outer cladding while the proposed fiber remains SPSM, which significantly reduces the mode effective area and the confinement loss. Our simulation results indicate that the proposed PCF has a 1540 nm SMSP range with <0.25 dB/km confinement loss and an effective area of 2.2 μm². Moreover, the group velocity dispersion (GVD) of the proposed PCF can also be tuned to be flat and near zero at the near infrared band (∼800 nm) by optimizing the outer cladding structure, potentially enabling many nonlinear applications.     

New nonlinear and dispersion flattened photonic crystal fiber with low confinement loss

A new nonlinear dispersion flattened photonic crystal fiber with low confinement loss is proposed. This fiber has threefold symmetry core. The doped region in the core and the big air-holes in the 1st ring can make high nonlinearity in the PCF. And the small air-holes in the 1st ring and the radial increasing diameters air-holes rings in cladding can be used to achieve the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCFs structure parameters. A PCF with flattened dispersion is obtained. The dispersion is less than 0.8 ps/(nm km) and is larger than −0.7 ps/(nm km) from 1.515 μm to 1.622 μm. The nonlinear coefficient is about 12.6456 W⁻¹ km⁻¹, the fundamental mode area is about 10.2579 μm². The confinement loss is 0.30641 dB/km. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal fibers with high nonlinearities.     

Research on terahertz photonic crystal fiber characteristics with high birefringence

A new high birefringence photonic crystal fiber is proposed within the terahertz frequency region. It has two types of claddings, the inner is composed of six ellipse air holes arranged in a honeycomb array and the outer surrounded by circle holes. By using the full vector finite element method with anisotropic perfectly matched layers absorption boundary condition, the birefringence, chromatic dispersion and confinement loss of the fundamental mode are evaluated. The results show that the birefringence can achieve 10⁻³ when the wavelength increases from 600 μm to 900 μm. This structure will provide some reference value for the designing of high birefringence terahertz photonic crystal fiber.     

Demonstration of temperature resilient properties of 2D silicon carbide photonic crystal structures and cavity modes

In this paper, photonic crystal (PhC) based on two dimensional (2D) square and hexagonal lattice periodic arrays of Silicon Carbide (SiC) rods in air structure have been investigated using plane wave expansion (PWE) method. The PhC designs have been optimized for telecommunication wavelength (λ = 1.55 μm) by varying the radius of the rods and lattice constant. The result obtained shows that a photonic band gap (PBG) exists for TE-mode propagation. First, the effect of temperature on the width of the photonic band gap in the 2D SiC PhC structure has been investigated and compared with Silicon (Si) PhC. Further, a cavity has been created in the proposed SiC PhC and carried out temperature resiliency study of the defect modes. The dispersion relation for the TE mode of a point defect A1 cavity for both SiC and Si PhC has been plotted. Quality factor (Q) for both these structures have been calculated using finite difference time domain (FDTD) method and found a maximum Q value of 224 for SiC and 213 for Si PhC cavity structures. These analyses are important for fabricating novel PhC cavity designs that may find application in temperature resilient devices.     

A novel 4-channel demultiplexer based on photonic crystal ring resonators

A 4-channel wavelength division demultiplexer based on photonic crystal structures suitable for WDM communication applications is proposed. In order to improve the wavelength selectivity we introduce four scattering rods above and under the X-shaped ring resonators in the proposed structure. It is shown that the PBG of the structure is tuned for communication systems in both TE and TM modes but the results demonstrated that just the first PBG in TM mode is suitable for WDM applications, so all the simulations will be done in TM mode. The minimum and maximum crosstalk between channels is −23.7 dB and −7.5 dB, respectively. Also, the average channel spacing in this structure is 3 nm.     

Photonic crystal optical switch using a new slow light waveguide and heterostructure Y-junctions

In this paper we propose a photonic crystal Mach-Zehnder interferometer (MZI) based on a new coupled-cavity waveguide, where its advantage over the previous type of photonic crystal coupled-cavity waveguide is discussed. A heterostructure Y-junction is comprised of square and hexagonal lattices of the new coupled-cavity waveguide. It is designed by applying the temporal coupled-mode theory and is optimized, where an overall throughput efficiency of more than 90% is achieved at the wavelength of 1.55 μm. The design of the Y-junction is performed using finite-difference time-domain method. The designed heterostructure Y-junction is used in the structure of a MZI, where its arms are approximately as short as 24 μm. Finally, the transient response of the proposed optical switch is investigated.     

Mid-infrared tunable dual-wavelength generation based on a quasi-phase-matched optical parametric oscillator

We report an efficient optical parametric oscillator (OPO) of dual idler wave output based on periodically poled MgO:LiNbO₃ with a periodically-phase-reversed grating structure, which is pumped by a Q-switched 1.064 μm laser with a repetition rate of 50 kHz. 0.98 W of dual idler-waves at 3.824 μm and 3.731 μm is achieved at room temperature, leading to a 12.9% conversion efficiency. The crystal temperature tuning provides output tunability of the dual idler wavelengths. In addition, the sum frequency generation of the dual signal waves is simultaneously observed in the OPO cavity.     

Integrated photonic crystal spectrometers for sensing applications

A combination of negative refraction and diffraction compensation in a superprism-based photonic crystal structure is used to demonstrate a compact on-chip photonic crystal spectrometer. This structure provides strong dispersion and signal isolation, which are essential for forming an efficient and compact spectrometer. Performance of these spectrometers as spectral pattern detectors is discussed. The experimental results show that a PC structure with 80 μm × 220 μm dimension can locate a single spectral feature with better than 10 pm accuracy over a bandwidth of 50 nm around 1550 nm center wavelength at an output signal-to-noise ratio of 13 dB.     

Design of leaky modes of two-dimensional photonic crystal slabs to enhance the luminescence from Er3N@C80 fullerenes

We develop an effective way to engineer a two-dimensional GaAs photonic crystal slab with its leaky eigenmodes at desired wavelengths by investigating its spectral dispersion, particularly in terms of transmission efficiency spectra at different launch angles of the light beam. Structural parameters for the photonic crystal slab with leaky eigenmode wavelengths at both 1492 nm and 1519 nm are obtained. This may lead to the enhanced luminescence from erbium-doped trinitride-template fullerenes (Er₃N@C₈₀) on the surface of the photonic crystal slabs.