Effect of plasma on modal dispersion characteristics of elliptical Bragg waveguide

In this paper, the dispersion characteristics of a plasma filled elliptical Bragg waveguide is investigated. The modal characteristic equations of the proposed Bragg waveguide for both ω > ω_p and ω < ω_p are derived. The effects of plasma frequency, numbers of cladding layers and the eccentricity of elliptical Bragg waveguide on the dispersion characteristics are studied. The analysis shows that the introduction of plasma in the proposed waveguide allows to control the propagation of modes.     

Light guidance in a photonic bandgap slab waveguide consisting of two different Bragg reflectors

By means of a zigzag-wave model, we perform a comprehensive analysis of the guided modes of a photonic bandgap slab waveguide that consists of a low-index guiding layer placed between two different Bragg reflectors. We show that the guided modes of the waveguide operate inside the overlapped bandgaps of the two Bragg reflectors. We label each mode with three mode orders, which reflect the features of the mode-field distribution in the guiding layer and the two Bragg reflectors, respectively. We discuss in detail the transmission characteristics of the guided modes, including the dispersion curves, the cutoff conditions, and the confinement factors, and highlight the mode-selection characteristics of the waveguide. We also study the effects of truncating the Bragg reflectors by deriving an analytical expression to show the dependence of the leakage losses of the modes on the numbers of the periods in the truncated Bragg reflectors.     

Propagation Characteristics of an Elliptically-cored Highly Birefringent Fiber using an Analytical Method

By using the method of separation of variables in the elliptical coordinate system, a representative formula in terms of Mathieu and modified Mathieu functions is derived and longitudinal field components for the even and odd modes are presented for the proposed fiber. The eigen value equation for the fiber to be considered is obtained by solving the fourth order determinantal equation under weak guidance condition and is given in this paper. The cutoff frequency of several lower orders modes for different eccentricities have been obtained and their propagation characteristics have been plotted. The effect of the eccentricity on the modal cutoff values and mode transmissions is discussed. Finally, the modal birefringence in the proposed fiber is also estimated.     

涂覆石墨烯的椭圆形电介质纳米线光波导的模式特性分析

设计了一种涂覆石墨烯的椭圆形电介质纳米线光波导.采用分离变量法,在椭圆柱坐标系中,借助Mathieu函数,得到了色散方程.通过数值求解色散方程,可以得到模式的有效折射率和场分布,从而得到模式的传播长度.研究了工作波长、结构参数以及石墨烯的费米能对模式特性的影响,并给出了前五个模式的品质因数.计算表明,当波长从4.3μm增加到8.8μm,这5个模式的有效折射率的实部减小,基模和一阶模的传播长度增大,二阶模的传播长度先增大后减小.当改变纳米线结构参数半长轴和半短轴时,对基模和一阶模的模式特性影响较小,对二阶模的模式特性影响较大.当石墨烯的费米能从0.45 eV增加到0.72 eV时,有效折射率的实部减小,传播长度可以达到2μm左右.分离变量法得到的结果与有限元方法得到的结果完全一致.本文工作可以为基于涂覆石墨烯的电介质纳米线的光波导的设计、制作和应用提供理论基础.     

Towards dispersion relations for tapered core dielectric elliptical fibers

The paper presents an analytical investigation of the electromagnetic wave propagation in a tapered core dielectric elliptical step-index fiber. Implementing Maxwell's equations in elliptical coordinates, field components are deduced that essentially incorporate Mathieu and the modified Mathieu functions. Finally, the characteristic dispersion equations are developed for even and odd modes supported by the fiber.     

Dispersionless slow light by photonic crystal slab waveguide with innermost elliptical air holes

We report a low-loss photonic crystal slab waveguide formed by deforming the innermost circle air holes in the conventional photonic crystal slab waveguide into elliptical ones. We obtain the photonic bands and group index of guided modes in this photonic crystal waveguide by guided-mode expansion method and investigate the dependence of photonic bands and group index of guided modes on the parameters of the innermost elliptical air holes. The group velocity and group velocity dispersion of this waveguide strongly depend on the innermost elliptical air holes. Photonic crystal slab waveguide with the optimum innermost elliptical air holes possesses a wider single mode region below the light line, in which light can easily propagate without intrinsic loss. At the same time, the guided mode supported by this waveguide has nearly constant group velocity and vanishing group velocity dispersion in a 3-5 nm bandwidth.     

Dispersion relation for space-charge waves in a warm plasma-filled elliptical waveguide in an infinite axial magnetic field

A perfectly conducting elliptical cylinder filled with a warm plasma and immersed in an infinite axial magnetic field is considered. Using Maxwell’s equations and dielectric tensor, a Mathieu differential equation for axial component of electric field is obtained. Considering the boundary conditions, dispersion relation for waves in a plasma of warm electrons and immobile ions, which fills an elliptical waveguide and it is under the action of infinite axial magnetic field are calculated. Furthermore, dispersion relation and scalar potential in the quasi-static approximation in a cold magnetized plasma elliptical waveguide is calculated. The obtained results are graphically presented.     

Modal analysis of a super-elliptical Bragg waveguide with a small number of periodic cladding layers based on a very simple analytical technology

Using a simple matrix method and replacing the boundary condition by a matrix equation, the characteristic equation of an unconventional Bragg waveguide, namely a super-elliptical Bragg waveguide, has been obtained analytically. Computed results are shown in the form of dispersion curves and are compared with the dispersion curves of a standard step index fiber and a standard Bragg fiber having circular core [V. Singh, B. Prasad, S.P. Ojha. Analysis of the modal characteristics of a Bragg fiber with a small number of claddings using a very simple analytical approach, Microw. Opt. Technol. Lett. 46 (2005) 271-275 [1]]. It is seen that the correspondence between the cutoff values for the standard step index fiber and the new super-elliptical Bragg fiber is quite close for the lowest mode under the weak guidance condition.     

Analytical solution of the scalar wave equation for slightly deformed optical Bragg waveguide

Using a simple analytical method, we study the electromagnetic-wave propagation in an optical Bragg waveguide which is slightly deformed at one side. We show the results of computations in the form of dispersion curves and provide a comparison with standard circular Bragg waveguides and step-index circular waveguides. We show that the correspondence between the cutoff V values for the standard step-index fiber and the new Bragg waveguide, which is slightly flattened on one side, is quite close for the lowest mode under the weak guidance condition.     

Enhancement of single mode operation in coaxial optical waveguide using DB boundary conditions

In this study, a competent numerical strategy to compute the dispersion of optical waveguides is presented and propagation of electromagnetic waves in a coaxial optical waveguide with DB boundary conditions is instigated. For this intend, cylindrical coordinates are here being used to derive the DB boundary conditions and to obtain field components for the modes. The propagation constant for the waveguide to be studied is determined by solving the Bessel and the modified Bessel functions. The cutoff frequencies for various lower order modes have been calculated and their dispersion characteristics are plotted correspondingly. The behavior of the coaxial optical waveguide under DB boundary conditions is shown to be significantly different from that of coaxial optical waveguide and conventional optical waveguide under traditional or tangential boundary conditions. Finally, the effect of waveguide dimensions on the mode cutoff frequencies and fabrication issues are also addressed.     

含左手材料对称五层平面波导模场特性

对芯层为左手材料而内外包层都是普通材料的对称五层平面波导进行了探讨.得到了两类TE振荡模的色散方程,且在考虑材料色散的条件下,画出了相关模式的色散曲线.随着模阶数的增加,模色散曲线左移,它们的截止频率变小.其次,发现零阶TE振荡模的存在.除此以外,TE振荡模有三类色散特性：正常色散;反常色散;双模简并.     

含左手材料对称五层平面波导模场特性(英文)

对芯层为左手材料而内外包层都是普通材料的对称五层平面波导进行了探讨.得到了两类TE振荡模的色散方程,且在考虑材料色散的条件下,画出了相关模式的色散曲线.随着模阶数的增加,模色散曲线左移,它们的截止频率变小.其次,发现零阶TE振荡模的存在.除此以外,TE振荡模有三类色散特性:正常色散;反常色散;双模简并.     

转移矩阵法在负折射率介质材料平板波导中的应用研究

利用严格电磁理论,推导出了适用于负折射率介质材料光波导的转移矩阵,分析讨论了转移矩阵的性质和应用.利用转移矩阵方法,推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模,最低阶为1阶模,并且有截止频率,只有波导参量满足一定条件的时候才会存在,导模的横向波数可以为实数和纯虚数,而正折射率介质波导导模的横向波数只能为实数.     

一种新型无色散慢光光子晶体薄板波导

利用椭圆形孔替代传统光子晶体薄板波导中邻接波导的最内层两排圆孔构成一种新型低损耗光子晶体薄板光波导.该波导的群速度和群速度色散特性强烈依赖于波导中这两排邻接波导的椭圆孔的特性.借助波导导模展开方法,计算得到波导的能带结构和群指数,并分析了它们与椭圆孔的参数关系.通过优化这些椭圆孔的参数,可以增加光子晶体光波导导模在光锥以下的无固有传输损耗带宽,在2—45 nm 的带宽上实现无色散的常数群速度.这些理论结果将为低损耗低色散慢光波导的设计制造提供理论基础. 关键词： 光子晶体薄板波导 群速度 群指数 群速度色散     

Polarization-Independent Guided-Mode Resonance Filters under Oblique Incidence

We present the dispersion relation of guided-mode resonances in planar periodic waveguides, both for s-polarized （TF, mode） and p-polarized （TM mode） incident waves. For a fixed homogeneous planar waveguide, dispersion curves of the TE eigenmode cannot cross that of the TM eigenmode at all. That is to say, at a certain wavelength, TE and TM modes cannot be excited with the same propagation constant. Due to Bragg reflection in the planar periodic waveguide, dispersion curves of the TE leaky mode may intersect with that of the TM leaky mode in the first Brillouin zone. We employ these intersections to achieve polarization-independent guided-mode resonance filters.     

Analysis of a Metal-Coated Planar Dielectric Waveguide with Chiral Cladding

The propagation characteristics of a metal-coated planar waveguide with chiral media filled in the cladding are presented. The effects of chirality on cutoff, dispersion characteristics and field distributions of the waveguide are studied. The results show that cladding chirality brings phase chopping to the transverse electric field component of those modes with odd mode numbers.     

Analysis of Circular Dielectric Waveguide with Chiral Cladding

The propagation characteristics of a circular dielectric waveguide with chiral media filled in the cladding are investigated. The relation between the cutoff frequency and the chiral admittance, the dispersion curves for some modes with different angular mode numbers and the transverse distribution of fields are presented. Some new features different from the ordinary circular dielectric waveguide are resulted. The results show that the cladding chirality may lead to a single-mode operation in the circular dielectric waveguide.     

双包层椭圆光波导解析解

解析求解了双包层椭圆光纤中的波动方程，得到了模式精确解有模式特征方程。对基模的特征方程进行了数值计算，给出了不同椭圆比下的归一化双折射和模间色散随归一化频率的变化关系曲线，并与高斯近似解的结果进行了比较。     

左手介质椭圆光波导基模传播特性

在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.     

Transmission properties of asymmetric slab waveguides with left-handed materials

A new dielectric slab waveguide with a left-handed material (LHM) cover and substrate is proposed. The dispersion relations and normalized effective thickness of the asymmetric LHM slab waveguide are investigated, in view of the normalized parameters. A number of unusual properties are found, for example, the fundamental and first-order modes do not exist and higher-order modes have double degeneracy. The propagation modes are absent at the low normalized frequency, and the cutoff frequencies of some LHM slab waveguide modes decrease with increase in the asymmetry measure. Unlike traditional slab waveguides, the V –H curves of the LHM slab waveguides are in one-to-one correspondence. Both TE and TM modes are discussed; in addition, the dispersion relations and normalized effective thicknesses of the TM modes are discussed in detail, when the difference in refractive indices of the film and the substrate is small. The results show that the region of mode coexistence taking place near the cutoff frequency becomes narrower with increase in the difference in refractive indices of the film and the substrate. The influence of this difference on the normalized effective thickness curves is different, and becomes smaller and smaller with increase in the value of the asymmetry measure, if different values of the refractive indices are employed.