Theoretical analysis of THz Sommerfeld wave propagation on metal wire at normal temperature

In this paper, THz Sommerfeld wave propagation on single bare metal wire and dielectrically coated metal wire waveguide is presented by the numerical calculation from 0.1 THz to 1 THz. The influences of different metal and different dielectric materials on the electric field distribution around the metal wire are analyzed. The characteristics of energy coupling in the coated metal wire with different metal and dimensions are also proposed. The analysis results release a fundamental characteristic for describing the surface wave propagation along the dielectrically coated metal wire at terahertz frequencies, and moreover, the analysis results also suggest that a simple dielectrically coated metal-wire can be used for terahertz applications due to its energy concentration, as compared to the single bare metal wire.     

GaP波导型发射器产生频率可调谐太赫兹脉冲

报道了利用脉宽可调的光子晶体光纤飞秒激光放大器抽运矩形波导结构的GaP晶体太赫兹(THz) 发射器产生频率可调谐的超快THz脉冲.非线性晶体中光整流过程产生的THz辐射频率随抽运光脉冲宽度而 变化. GaP波导THz发射器可通过波导的几何尺寸来控制色散,以达到增加有效作用长度和提高输出功率的目的. 不同横截面尺寸的波导型发射器的THz辐射峰值频率随相位匹配条件的改变而改变,加以脉宽调节技术, 可以在大频谱范围获得频谱精细可调的THz脉冲.实验中在1 mm×0.7 mm的波导型THz发射器中获得了 频率可调谐的THz脉冲.提出实现THz辐射频率大范围调谐的GaP波导型阵列发射器的实施方案.     

Nanofocusing of terahertz wave on conical metal wire waveguides

The nanofocusing of the terahertz (THz) radiation energy is studied. By using a conical metal nanowire waveguide, we focus the energy of the terahertz surface plasmon polaritons (THz SPPs) to several nanometers’ scale. Another interesting property of the THz SPPs propagation on the waveguide is that the peak electric field at the waveguide tip enhances many times. What is more, both the phase velocity and the attenuation coefficient versus the wire radius are obtained. The terahertz energy nanofocusing opens the way to observe terahertz propagating and imaging on the nanoscale.     

Terahertz photonic states in semiconductor-graphene cylinder structures

We propose a semiconductor-graphene cylinder that can serve as a terahertz (THz) photonic crystal. In such a structure, graphene plays a role in achieving a strong mismatch of the dielectric constant at the semiconductor-graphene interface due to its two-dimensional nature and relatively low value of the dielectric constant. We find that when the radius of the outer semiconductor layer is about ρ(1)~100 μm, the frequencies of the photonic modes are within the THz bandwidth and they can be efficiently tuned via varying ρ(1). Furthermore, the dispersion relation of the photonic modes shows that a semiconductor-graphene cylinder is of excellent light transport properties, which can be utilized for the THz waveguide. This study is pertinent to the application of graphene as THz photonic devices.     

基于耦合场量子受激拉曼散射的太赫兹波辐射

使用两块长度各为65 mm的MgO:LiNbO3和无掺杂LiNbO3晶体,以1064nm的Q开关Nd:YAG激光器作为抽运光源,在12 mJ/pulse的抽运光能量下得到频率范围为0.34～2.90 THz的电磁辐射.分析表明,激光入射使LiNbO3晶体中具有电磁特性的横光学声子可以和入射光子形成耦合场量子.作为一种电磁特性的元激发,LINbO3晶体的耦合场量子的辐射场频率覆盖部分太赫兹频段范围,并可通过耦合场量子受激拉曼散射过程辐射THz波.根据耦合场量子辐射理论,通过分析晶体的耦合场量子色散特性曲线,可以确定该晶体能否辐射THz波及其带宽范围.     

Optimization design of optical waveguide control by nanoslit-enhanced THz field

We discuss design issues of devices which were proposed recently [Opt. Lett. 37 (2012) 3903] for terahertz (THz) control of the propagation of an optical waveguide mode. The mode propagates through a nonlinear dielectric material placed in a metallic nanoslit illuminated by THz radiation. The THz field in the slit is strongly localized and thus significantly enhanced, facilitating nonlinear interactions with the dielectric waveguide material. This enhancement can lead to notable changes in the refractive index of the waveguide. The closer the waveguide is to the slit walls, the higher the nonlinear effects are, but with the cost of increasing propagation losses due to parasitic coupling to surface plasmon polaritons at the metal interfaces. We analyze several optical waveguide configurations and define a figure of merit that allows us to design the optimal configuration. We find that designs with less overlap of the THz and optical fields but also with lower losses are better than designs where both these parameters are higher. The estimated terahertz field incident onto the metallic nanoslit required to manipulate the waveguide mode has reasonable values which can be achieved in practice.     

2.9THz束缚态向连续态跃迁量子级联激光器研制

采用气源分子束外延技术生长了GaAs/AlGaAs束缚态向连续 态跃迁的太赫兹量子级联激光器材料, 基于半绝缘等离子体波导工艺制作了太赫兹量子级联激光器. 测量了激光器的发射光谱和功率-电流-电压关系曲线, 研究了器件的激光特性. 器件激射频率约2.95 THz, 脉冲模式下, 最高工作温度为67 K. 连续波模式下, 阈值电流密度最低为230 A/cm², 最大光输出功率1.2 mW, 最高工作温度为30 K. 关键词： 太赫兹 量子级联激光器 分子束外延 波导     

有限厚度金属狭缝对太赫兹脉冲的整形和滤波

用时域有限差分算法（FDTD）分析了有限厚度金属狭缝对太赫兹（THz）脉冲进行时空整形的效应和特性.分析表明：这种基于衍射方法的准光学技术手段对横向磁场（TM）模式THz脉冲有很好的整形和滤波作用,而对横向电场（TE）模式THz脉冲几乎没有整形和滤波作用,并运用平面光波导理论对所获得的数据模拟结果进行了定性说明.这些分析结果可在相关实验中予以考虑和采用. 关键词： 时空整形 FDTD THz脉冲 狭缝滤波器     

Whispering-gallery mode terahertz pulses

We report what is to our knowledge the first observation of a subpicosecond terahertz (THz) pulse propagating as a superposition of the whispering-gallery modes (WGMs) of a dielectric cylinder. The WGM THz pulses are coupled into and out of a 5-mm-diameter silicon cylinder via a 100-mum -thick, single-mode silicon slab waveguide. We observed two round-trip cylindrical cavity pulses from this coupling structure, which cover a continuous frequency range from 0.4 to 1.8 THz. The coupled-mode equations are used to analyze this system and give reasonably good agreement with the experiment in both the frequency and the time domains.     

环状烯烃聚合物基底材料的太赫兹复介电常数和损耗特性研究

太赫兹时域光谱(THz-TDS)已被用于研究包括液体,半导体,爆炸物和气体等多种材料。然而自由空间太赫兹光谱系统存在着一些检测局限性,如微量物质难以被检测、系统尺寸难以实现微型化、空气中水的强烈吸收引起的信号衰减较大等问题。为了解决这些问题,研究人员设计了基于金属波导传输线结构的太赫兹芯片集成器件,通过飞秒红外激光激励传输线上的光电导材料实现太赫兹波的产生和检测。然而,在这些芯片上传输的太赫兹信号的频谱宽度很难达到自由空间太赫兹时域光谱系统的频带宽度,一个重要原因是由于传输信号受到随频率增加的传输线损耗所导致的衰减。通常这些损耗主要由三个部分组成：导体损耗,介电损耗和辐射损耗。研究表明：使用低介电常数材料作为共面传输线的衬底,将减少这种介电常数的失配,从而避免冲击波辐射损失;使用具有低损耗角正切的基底材料可以减少太赫兹传输线的损耗。环烯烃聚合物(COP)是一种具有环状烯烃结构的非晶性透明共聚物的材料,在太赫兹波段具有很高的透射率,为了探究这种材料是否能用于共面传输线的衬底,需要通过太赫兹时域光谱技术和介电函数理论分析它在太赫兹频段的光谱和介电特性,以及对这种材料作为基底时用在太赫兹传输线的传输特性进行仿真计算分析。使用透射式太赫兹时域光谱系统,对三种COP、熔融石英和PMMA进行了光谱测试,提取了它们的透射时域信号,采用Dorney和Duvillaret等提出的物理模型计算复介电函数。实验表明：与其他两种材料相比,COP材料在1 THz处的透过率更高,可以达到94.5%,同时介电损耗和介电常数更低,其中介电损耗在1 THz处达到4.31×10-4,因此将COP作为传输线基底材料时能有效减少基底的介电损耗。同时COP材料的介电常数在0.2～2.8 THz范围内维持在约2.3的水平,也有效减弱了辐射损耗。对实验材料基底组成的共面波导传输线进行了HFSS模拟,获得了它们的正向传输衰减系数(S₂₁ parameter),并对由基底引起的介电损耗和辐射损耗进行了计算分析。模拟和计算结果也表明在同一传输线结构下,与其他材料相比COP作为基底时的损耗更小。通过太赫兹时域光谱法与介电响应分析,表明了在太赫兹波段具有较低介电常数的COP材料更适合作为太赫兹传输线结构的基底材料,它可以有效的降低因基底引起的介电损耗和辐射损耗。这为太赫兹传输线的设计过程中衬底材料的选择与应用提供了实验和理论依据。     

太赫兹波在有限电导率金属空芯波导中的传输特性

研究了太赫兹波在具有有限电导率的金属镀层空芯波导中的传输特性.从其传输的特性方程出发,利用Newton-Raphson迭代方法数值模拟了传输损耗和相位常数随太赫兹波频率、波导内径以及波导中金属镀层的电导率的变化关系.结果表明,采用大芯径波导和高电导率的金属镀层能有效降低太赫兹波的传输损耗. 关键词： 太赫兹波 空芯波导 特征方程     

0.14THz高功率太赫兹脉冲的频率测量

提出了采用截止波导法与谐波混频法相结合的方式,进行0.14THz高功率短脉冲的频率测量.首先将两个截止频率分别为0.125和0.15THz的非标准矩形波导作为接收端,通过截止波导滤波法获得了太赫兹辐射源的频率范围.然后根据已知的频率范围,将本振频率选择为15—20GHz,则谐波混频的谐波次数确定为8.随后的Ka波段的脉冲测试和0.14THz连续波测试表明,该8次谐波混频器可用于0.14THz脉冲的混频测量.最后,0.14THz脉冲频率测量实验给出了太赫兹辐射源的准确频率为0.1465THz.该方法大大降低了对本振信号的频率要求,且结果准确可信,为长波段太赫兹脉冲的频率测量提供了一种新的思路.     

太赫兹量子级联激光器频率梳的色散

群速度色散会限制太赫兹量子级联激光器频率梳的稳定以及频谱宽度.对于太赫兹量子级联激光器频率梳,其色散主要由器件增益、波导损耗、材料损耗引起.研究基于4.2 THz量子级联激光器双面金属波导结构,通过建立德鲁德模型,利用有限元法计算了激光器的波导损耗;器件未钳制的增益由费米黄金定则计算得到,结合增益钳制效应,计算了器件子带电子跃迁吸收以及镜面损耗,得到了器件钳制后的增益;利用Kramers-Kronig关系得到了器件的增益、波导损耗、材料损耗引起的色散,结果表明器件的激射区域存在非常严重的色散(–8×10~5—8×10~5 fs~2/mm).同时,计算了一种基于Gires-Tournois干涉仪结构的色散,结果表明,该结构的色散具有周期性,可以用于太赫兹量子级联激光器的色散补偿.     

并行多注THz折叠波导行波管的理论分析与数值模拟

为了提高THz行波管的输出功率,通过并行多注和功率合成的方法,完成了并行多注D波段折叠波导行波管的理论分析与数值模拟。计算结果表明:单束行波管在0.135～0.157THz频率区间具有很好的色散平坦度,3dB带宽为13GHz,0.14THz处获得了20.88dB的最大增益;多束合成行波管在0.14THz处获得了20.8dB的合成增益,3dB带宽区间合成效率不低于92%。数值模拟表明该方法很好地实现了多路放大信号的合成输出。并行多注行波管具有输出功率大、单束电流小、聚焦磁场低等优点,能够在低发射电流密度条件下实现大功率THz辐射。     

Transmission properties and band structure of a segmented dielectric waveguide for the terahertz range

In this paper we investigate the band structure of guided modes in a segmented planar waveguide for the terahertz range. The dispersion curves are obtained using two different methods. The first approach is based on a close relationship between the band structure and narrow resonances in transmission spectra: transmission spectra are therefore calculated using a transfer matrix method and compared to the experimental ones. The second technique involves a modal analysis approach of diffraction gratings and it is used for direct calculation of the band structure. Propagation of THz guided waves along the grating considered as a segmented dielectric waveguide is also investigated using a bi-directional mode expansion and propagation method. All approaches are compared to each other and discussed.     

0.14 THz高功率太赫兹脉冲的参数测量

给出了0.14 THz高功率单次脉冲信号的频率和功率的测量方法及实验结果。针对高功率太赫兹脉冲频率高、峰值功率高和脉宽短的特点,实验中采用了截止波导滤波法与谐波混频法相结合的方式准确测定了脉冲信号频率,利用辐射场功率密度积分法获取了辐射脉冲的远场功率分布,并给出了单次脉冲的辐射功率。某实验条件下的测量结果表明,0.14 THz高功率太赫兹脉冲的频率为0.146 3 THz,脉宽约为1.5 ns,功率不小于0.5 MW。     

基于锑化铟亚波长阵列结构的太赫兹聚焦器件

基于锑化铟材料在太赫兹波段的横向磁光效应,提出了一种金属-空气-锑化铟-金属非对称周期性亚波长线栅阵列结构的表面等离子体器件,研究了外加磁场和温度对不同频率透射波聚焦特性的影响.结果表明,在外加磁场强度B=0.6 T、温度T=172 K时,可实现0.8 THz透射光束的聚焦,焦点处能流密度透过率比没有外加磁场时增强28倍.对于不同频率入射波,通过主动调节磁场强度和温度,能实现从0.4—0.8 THz宽频带的聚焦,而且焦点处的透过率相比于无外加磁场时的普通狭缝聚焦透过率增强20倍以上,该器件是太赫兹波段理想的可调谐、宽频段、高透过率的聚焦器件.     

太赫兹片上系统中低温砷化镓薄膜光电导天线的研究

太赫兹时域光谱技术是一种在太赫兹频段内,广泛应用的光谱测量技术。这种技术可以用于许多物质的频谱分析,对于研究化学、半导体与生物分子等领域有着无可比拟的作用。然而用该系统进行样品探测时,受回波的影响频谱分辨率较低;受太赫兹波光斑大小以及待测样品与电磁波相互作用距离长短的影响,样品消耗量较多,并且整个系统的占用空间较大,这些局限性都限制了太赫兹时域光谱系统的进一步发展。为了突破太赫兹时域光谱系统的局限性,设计了一种将太赫兹泵浦区、探测区和传输波导集成到一个硅片上的太赫兹片上系统,该系统不仅能够解决上述系统的局限性,还能够省去样品测量前的光路准直环节,使样品的测量过程更加简便,同时集成化的系统也很大程度上提高了太赫兹波传输的稳定性。在太赫兹片上系统中,泵浦区和探测区的光电导天线是由低温砷化镓和金属电极制成,由于受到太赫兹片上系统的高度集成化和低温砷化镓晶体生长条件的限制,如何制备出低温砷化镓半导体薄膜衬底,并将其转移与键合,是太赫兹片上系统研制过程中的关键环节。首先利用分子束外延（MBE）技术制备出由半绝缘砷化镓、砷化镓缓冲层、砷化铝牺牲层和低温砷化镓层构成的外延片,然后利用盐酸溶液与砷化铝和低温砷化镓反应速度差别较大的原理,将200 nm厚的AlAs牺牲层腐蚀掉,从而得到2 μm厚的低温砷化镓薄膜。为了更加高效并且完整地得到低温砷化镓薄膜,研究了盐酸溶液在不同温度和不同浓度下与AlAs牺牲层的选择性腐蚀速率的关系。给出了低温砷化镓薄膜制备过程中盐酸的最佳体积比浓度和最佳温度,即在73 ℃下13.57%的盐酸溶液中进行砷化铝牺牲层的腐蚀。相比于已有工艺,这种腐蚀方法对实验设备的要求较低并且具有较高的安全性。最后,将单层低温砷化镓薄膜转移键合至硅片上,并制成光电导天线的结构。利用飞秒激光脉冲进行激发探测到太赫兹信号。由此说明,低温砷化镓薄膜的获取、转移与键合工艺能够满足芯片级太赫兹系统的制作要求,这为太赫兹片上系统的进一步研制打下了坚实的基础。     

填充ENZ材料的太赫兹高双折射及近零平坦色散微结构光纤北大核心CSCD

为了实现太赫兹波的保偏波导传输,设计了一种含有纤芯缺陷孔和椭圆形包层空气孔的高双折射微结构光纤。通过在包层空气孔中选择性地填充太赫兹近零介电常量(epsilon-nearzero,ENZ)材料,引入了几何结构和材料分布的双重不对称性,破坏了2个偏振基模的简并以获得高双折射特性。应用有限元方法研究了光纤的双折射、损耗和色散等传输特性随结构参数的变化规律。在0.5 THz~2 THz的宽频段范围内获得了大于0.01的高双折射。x和y偏振基模的损耗在0.8 THz附近具有最小值,分别为0.903 dB·cm^(-1)和0.851 dB·cm^(-1)。纤芯缺陷孔可以有效调节色散特性,y偏振基模在1 THz~1.8 THz范围内具有(0±0.054)ps·THz^(-1)·cm^(-1)近零平坦色散特性。光纤的传输特性对ENZ材料的折射率变化不敏感。研究结论为研制太赫兹保偏光纤提供了理论参考。     

Coupled THz Waveguide Utilizing Surface Plasmon Polaritons on Thin Dielectric Slab Sandwiched between Two Corrugated Metallic Claddings

We present a comprehensive experimental study of terahertz （THz） wave propagation utilizing surface plasmon polaritons （SPPs） on the interfaces of a thin dielectric core layer sandwiched between two corrugated metallic claddings. THz wave impinges on the structured surfaces at normal incidence. Long-lasting oscillation propagation features are observed in the temporal waveform after traveling through the periodic arrays. The enhanced THz transmission can be achieved due to the coupling between incident waves to SPPs at the bottom and top interfaces. The finite element method is used to simulate the field distribution and the transmission mode in the waveguide. The hybrid waveguide with low absorption has great potential applications in THz integrated devices.