Experimental demonstration of polarization multiplexing for simultaneously providing broadband wireless and wired access

A fiber-based wavelength-division-multiplexing (WDM) network utilizing polarization multiplexing (PolMUX) is proposed to simultaneously provide broadband wireless and wired services. In such a dual-service access network, the wireless and wired services are separately delivered in two orthogonal states of polarization with well independence in a single WDM channel. The impact of several polarization-dependent interferences becomes insignificant due to the relatively short transmission distance in access networks. The feasibility of PolMUX is experimentally demonstrated with a power penalty at BER = 10^-9 of about 0.5 dB and 1 dB for 2.5 Gb/s wired and wireless downstream services, respectively. The proposed system is compatible with the current reported techniques in either WDM passive optical networks (WDM-PON) or radio-over-fiber (ROF) systems.     

Performance analysis of symmetrical 10 Gbps colorless WDM-PON using subcarrier modulated downstream and wavelength converted upstream through RSOA

Here we have demonstrated a novel architecture of colorless wavelength division multiplexed-passive optical network (WDM-PON) and analyze its performance which is capable of transmitting 10 Gbps data symmetrically in both downstream and upstream. In this architecture downstream data is subcarrier modulated (SCM) using radio frequency (RF) as subcarrier and laser frequency as carrier with the help of a Mach–Zehnder modulator (MZM). For upstream data modulation an electro-absorption modulator, an optical coupler and reflective semiconductor optical amplifier (RSOA) are used. Upstream data is transmitted through wavelength conversion between pump wavelength and continuous wave light sent from central office (CO) using cross gain modulation (XGM) in RSOA. Pump wavelengths have separate wavelength band than the carrier's wavelength sent from optical network unit (ONU) and can be chosen any one in its band. Since carrier reuse scheme is implemented so all the ONUs are operates in colorless mode. Effect of ER of delay interferometer (DI) on output OCSR of DI for different input OCSR is performed for SCM data. Simulation is performed with all 16 downlink and 16 uplink channels having data rate of 10 Gbps having acceptable performance.     

A novel full duplex 16 Gbps SCM/ASK radio over fiber WDM-PON sharing wavelength for up- and down-link using bidirectional reflective filter

In this paper, a new bidirectional wavelength division multiplexing radio-over-fiber (WDM-RoF) using Subcarrier Multiplexing/Amplitude Shift Keying (SCM/ASK) is proposed which shares the same wavelengths for both up-link and down-link. A bidirectional reflective filter (BRF) is utilized in the upstream link to provide a reliable bidirectional optical channel. WDM is used to further increase the capacity of system. Simulation of the proposed scheme demonstrates 1 Gbps down- and up-link data stream for 16 channels over the length of 25 km with acceptable Q-factor (>6 dB).     

Colorless gigabit WDM-PON link using injection locking and electro-absorption transceiver

In this paper, a novel colorless wavelength division multiplexing-passive optical network (WDM-PON) system using injection locking and electro-absorption transceiver (EAT) is proposed and demonstrated experimentally. This system has advantages, high data transmission, small downlink signal effect to uplink signal and less polarization sensitivity, compared to the system using reflective semiconductor optical amplifier (RSOA). Downlink signal modulates the right side carrier of the double side band signal by using injection locking. EAT functions as both photo detector in downlink signal and modulator for uplink signal, simultaneously. A possible cross absorption modulation effect from the EAT is analyzed experimentally. Bidirectional transmission of 1.25 Gbps and 622 Mbps for downlink and uplink, respectively, were verified through 23 km standard single mode fiber (SSMF).     

Design of wavelength adjustable lasers with photonic crystal based Fabry-Perot etalon for applications in optical network units of wavelength-division-multiplexed passive optical network systems

We propose a novel wavelength adjustable laser (WAL) with a photonic crystal based Fabry-Perot (FP) etalon. This laser will be a promising light source for optical network units (ONUs) of conventional wavelength-division-multiplexed passive optical network (WDM-PON) systems for up-stream transmission. It has the merits of a relatively simple fabrication and operation, wide process tolerance, low-cost, high side-mode suppression ratio, and wavelength-tunable characteristics. The optimization of the device structure and the implementation methods for this type of laser are discussed. Although the WALs in WDM-PON systems are not colorless, each laser can cover several wavelengths. Thus, the required number of different ONUs can be reduced. This approach may be necessary for 10 Gbps upstream transmission in next-generation optical access networks because the 10 Gbps data rate is difficult to achieve by using current colorless schemes.     

Investigation of wavelength division multiplexing ring network topology to enhance the system capacity

In this paper, we have investigated the wavelength division multiplexed (WDM) system using ring network topology. This network is used to increase the capacity with eight optical add/drop multiplexers (OADMs) by using dispersion compensating fiber and semiconductor optical amplifier (SOA) to achieve a distance up to 1600 km. It is observed that network shows the acceptable results at 15 Gbps data rate with 100 GHz channel spacing. The OADM nodes are also varied to investigate the network performance in the term of BER and Q-factor.     

Enhanced colorless and broadcast capable symmetrical 10-Gbps bidirectional transmission in WDM-PON using RSOA and EAM

Here we proposed a novel architecture of wavelength division multiplexed-passive optical network (WDM-PON) in which the downlink unicast data, broadcast data and uplink unicast data transmission is possible with the symmetric data rate of 10 Gbps. At remote node (RN) cyclic wavelength routing property of array waveguide grating (AWG) and power splitting capacity of power splitter is used in the architecture so that broadcast channel can be overlaid on downlink unicast channels. At ONU carriers sent from central office (CO) is reused for upstream data transmission with the help of integration of a reflective semiconductor amplifier (RSOA) and an electro-absorption modulator (EAM) so there is no need of extra laser sources at ONUs which makes them colorless. EAM can be operated at very high speed; a modulation bandwidth of tens of GHz can be achieved. Broadcast channel causes a limited interference with downlink and uplink unicast channels so it does not affect the system performance. Since each channel has different wavelength so NRZ data is used which eliminates expensive DPSK receivers and detection becomes very easy. Simulation is performed with all channels having data rate of 10 Gbps having acceptable performance.     

Application of Turbo codes in optical OFDM multimode fiber communication system

In this paper, Turbo Code is proposed in optical OFDM multimode fiber communication system in order to decrease the bit error rate (BER) of the system, which is mainly affected by the deep nulls of the magnitude response of multimode fiber in the high frequency region (above 3 dB). A simulation system in SIMULINK is established. Based on the system, the BER of the system with Turbo Code is compare to the systems with another two typical coding schemes including convolutional code (CC) and serially concatenated code (SCC) which uses a concatenation of convolutional and RS codes when transmitting 10 Gbps data over various length multimode fibers. Different transmitting rate is also considered. The results show that Turbo coded system has a lower BER than the other two systems and the Turbo coded system can transmit 10 Gbps data to the distance of 300 m with BER below 1e−6.     

Modeling of 2.5 Gbps-intersatellite link (ISL) in inter-satellite optical wireless communication (IsOWC) system

Free-space optics (FSO) has the combined features of most dominated telecommunication technologies: wireless and fiber optics. Many of the aspects of FSO are related to fiber optics with an important difference of transmission medium which is air/free space rather than the glass of the fiber-optic cable. Inter-satellite optical wireless communication systems (IsOWC), one of the important applications of FSO/WSO technology, will be deployed in space in the near future as such systems provide a high bandwidth, small size, light weight, low power and low cost alternative to present microwave satellite systems. In this paper, we have designed a model of IsOWC system using OPTI-SYSTEM™ simulator to establish an inter-satellite link (ISL) between two satellites estranged by a distance of 1000 km at data rate of 2.5 Gbps which is not reported in previous investigated works.     

A novel approach for simultaneous millimeter wave generation and high bit rate data transmission for Radio over Fiber (RoF) systems

We propose a novel method for simultaneous transmission of OC-192 (9.95328 Gbps) digital data and 60 GHz RF generation in a Standard Single Mode Fiber (SSMF) link utilizing Stimulated Brillouin Scattering (SBS). The system comprises of a 1550 nm DFB Laser diode, Mach Zehnder modulator (MZM), 50 km SSMF and Optical receiver. The receiver includes laser diode for optical pump, a regenerator for data retrieval and a RF bandpass filter for RF generation. This system requires minimum number of RF and optical components for the generation of 60 GHz RF. The remotely generated 60 GHz RF signal may be used for wireless transmission of data. The entire link is simulated in Optisystem software to analyze the system performance.     

Enhanced performance analysis of inter-satellite optical-wireless communication (IsOWC) system

In this paper, we have reported the improved performance by usage of a square root module. By simulation in OPTISYSTEM™ a distance of 5000 km with 1.25 Gbps was achieved with the same performance representing an enhancement of 48% when compared to the traditional detection.     

Comparison of various dispersion compensation techniques at high bit rates using CSRZ format

In this paper, the dispersion compensation techniques are compared on the basis of eye opening, eye closure, bit error rate and Q-factor. These techniques are applied to CSRZ system, which operates at bit rates of 2.5, 5, 10, 15 and 20 Gbps bit rates. The technique using fiber Bragg grating (FBG) for dispersion compensation is the best technique as this technique gives larger values of eye opening at 10 and 20 Gbps bit rate, smaller values of eye closure at 10 and 20 Gbps, minimum value of BER at 15 Gbps and maximum value of Q-factor at 15 Gbps when compared with other techniques. The RDF technique is the next best technique since this technique gives maximum value of eye opening when other techniques give almost similar values of eye opening at 15 Gbps, minimum value of eye closure at 15 Gbps, minimum value of BER at 15 Gbps and maximum value of Q-factor at 15 Gbps when compared with other techniques. The DCF is the next best technique as this technique gives maximum and minimum values of eye opening and eye closure at 20 Gbps (next best to FBG at 20 Gbps).     

Investigation of a high-speed optical FSK scheme for WDM-PON applications with centralized lightwave source

This paper proposes and numerically investigates a novel high-speed wavelength-division-multiplexed passive optical network (WDM-PON) architecture with colorless user terminals based on the use of orthogonal modulation scheme for downstream and upstream transmission. The 40 Gb/s optical frequency shift keyed (FSK) downstream data is generated based on carrier-suppressed modulation. At optical network unit, the downstream signal is directly re-modulated by the 2.5 Gb/s up-stream data and sent back with the same fiber. Error free transmission over 20 km single mode fiber can be observed for both downstream and upstream signals in our simulation. Power budget, tolerance of channel spacing, FSK tone spacing and dispersion are all investigated. Factors that might influence the stability of the system are analyzed and an extended hybrid wired/wireless version of the scheme is also given.     

Bidirectional WDM-PON architecture using a reflective filter and cyclic AWG

We proposed and demonstrated a bidirectional SCM-WDM PON using a reflective filter and cyclic AWG where up/downlink data could be provided using a single optical source. In the proposed scheme, the signal for downstream was modulated by a single CW laser diode and remodulated in the optical network unit as an upstream, the proposed WDM-PON scheme can offer the SCM signal for broadcasting service. In this paper, 1 Gb/s signals both for up- and downstream were demonstrated in 10 km bidirectional optical fiber link.     

Using Fabry-Perot laser diode and reflective semiconductor optical amplifier for long reach WDM-PON system

In this investigation, we propose and investigate the simple self-injection locked Fabry-Perot laser diodes (FP-LDs) in optical line terminal (OLT); and wavelength-tunable optical network unit (ONU) using reflective optical semiconductor amplifier (RSOA) and FP-LD laser for downstream and upstream traffic in long reach (LR) wavelength division multiplexed-passive optical network (WDM-PON) respectively. The output performance of the proposed two laser sources in terms of power and side-mode suppression ratio (SMSR) has been discussed. Here, for the downstream traffic, the proposed optical transmitter can be directly modulated at 2.5 Gb/s on-off keying (OOK) format with nearly 0.4 dB power penalty at bit error rate (BER) of 10⁻⁹ through 75 km single-mode fiber (SMF) transmission. Moreover, the proposed upstream transmitter can be directly modulated at 1.25 and 2.5 Gb/s with nearly 0.5 and 1.1 dB power penalty, respectively, at the BER of 10⁻⁹.     

Performance comparison of pre-, post- and symmetrical-dispersion compensation techniques using DCF on 40 Gbps OTDM system for different fibre standards

Various factors like polarization mode dispersion, non-linear effects, Kerr effect, second and third order dispersion impose limit on the performance (transmission distance, pulse broadening) of Optical Time Division Multiplexed (OTDM) transmission system. In this paper, the performance comparison of 40 Gbps OTDM transmission system with pre-, post-, and symmetrical-dispersion compensation techniques for different fibre standards has been carried out. It has been observed that for pre compensation, ITU 655 [D = 3.78 ps/nm/km] came to be best suitable fibre with the dispersion compensating fibre length of 2.36 km for maximum reach of 3000 km. For post- and symmetrical-compensation, the behaviour of alcatel [D = 8 ps/nm/km] is almost similar with maximum transmission distance of 3200 and 3050 km respectively.     

10 Gb/s WDM-PON based on FP-LDs injection locked by downlink optical carrier

We propose and demonstrate a 10 Gb/s wavelength division multiplexed passive optical network (WDM-PON) where subcarriers are employed to transmit the downstream data and optical carriers of the downlink subcarrier modulated (SCM) lights are reused to injection lock Fabry-Perot laser diodes (FP-LDs) for uplink transmission. Experiment results show that a very good BER performance can be achieved for both uplink and downlink at 10 Gb/s. The impact of optical carrier to subcarrier ratio and wavelength mismatching is also investigated.     

Realization of free space optics with OFDM under atmospheric turbulence

Free space optics (FSO) technology provides a promising solution for future broadband networks, offering high data transmission compared to RF technology. This work is focused on investigating the performance of an FSO system with OFDM and QAM. A 10 Gbps data stream is transmitted using a 4-level QAM sequence through the FSO system under different atmospheric conditions. Results indicate that the integration of SOA prolongs the maximum achievable distance with acceptable SNR to 185 km under clear weather conditions whereas under atmospheric fog, the maximum distance is extended to 2.5 km.     

Improved performance analysis of Gigabit passive optical networks

Gigabit passive optical networks (GPON) provide a capacity boosts in both the total bandwidth and bandwidth efficiency through the use of larger variable-length packets in Passive Optical Networks technology. In this paper, we have described a purely-passive GPON compatible reach extender using distributed Raman amplification and reported the improved investigation through implementation of a square root module by a distance of 60 km at data rate of 2.5 Gbps. An efficient improvement in Q factor is achieved with square root module, which further helps in increasing the length of GPON.     

Enhanced performance analysis of optical CDMA communication system

Optical CDMA technique is required to meet the increased demand for high speed, large capacity communications in optical networks. OCDMA assures data access security and supports asynchronous burst data transmission. In this paper, improvement in optical CDMA has been done by implementing forward error correction technique and a distance of 100 km was achieved BER 10⁻¹⁹ at bit rate 3.75 Gbps with forward error correction in optical CDMA.