Regioselective and stereoselective alternating copolymerization of carbon monoxide with functional olefins

Enantioselective, alternating copolymerizations of carbon monoxide with ω‐undecylenic acid, ethyl acrylate, and butyl acrylate were carried out for the first time with a palladium catalyst modified by 1,4:3,6‐dianhydro‐2,5‐dideoxy‐2,5‐bis(diphenylphosphino)‐L ‐iditol. Optical rotation, elemental analysis, and ¹H NMR,¹³C NMR, and IR spectra showed that the copolymers were optically active, isotactic, alternating poly(1,4‐ketone) or poly(spiroketal) structures. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2027–2036, 2001     

Alternating copolymerization through the complexes of conjugated vinyl monomers–alkylaluminum halides

A vinyl monomer that has the nitrile or carbonyl group conjugated to the C?C double bond, such as acrylonitrile, methyl acrylate, and methyl methacrylate, forms a complex with an alkylaluminum halide, and the complex reacts spontaneously with a hydrocarbon monomer such as styrene, propylene, or ethylene, giving a high molecular weight copolymer. The copolymers always contain the two monomer units in 1:1 ratio. Thus styrene, copolymerized with methyl acrylate or methyl methacrylate in the presence of ethylaluminum sesquichloride in homogeneous toluene solution, gives such an equimolar copolymer regardless of the initial monomer compositions. The NMR spectra of these copolymers are distinctly different from those of the equimolar copolymers obtained with azobisisobutyronitrile as initiator and have simpler and well separated patterns. The copolymers and the corresponding radical copolymers appear to be amorphous, judged by their x-ray diffraction patterns and their differential thermal analyses. Their infrared spectra resemble each other very closely. Hence, the difference in the NMR spectra may be ascribed to the matter of the sequence distribution. The infrared spectrum of ethylene–methyl acrylate copolymer shows no absorption near 720 cm.^?1 due to the methylene sequence arising from ethylene–ethylene linkage. These experimental data lead to the inference that the equimolar copolymers obtained in this work may have an alternating sequence.     

Alternating copolymerization of methyl acrylate with donor monomers having a protected amine group

Attempts were made to copolymerize p-aminostyrene, p-acetamidostyrene, N-methyl-p-aceta-midostyrene, N-(4-vinylphenyl) phthalimide, N-vinyl succinimide, and N-vinyl phthalimide with methyl acrylate complexed with ethyl aluminum sesquichloride. Only reactions involving N-(4-vinylphenyl)phthalimide and N-vinyl phthalimide yielded alternating copolymers. N-vinyl succinimide gave nonalternating copolymers insoluble in common solvents and the other monomers did not copolymerize. In some cases, the conventional radical copolymers were prepared for comparison purposes. The reactivity ratios of the free-radical initiated copolymerization of methyl acrylate (I) with N-(4-vinylphenyl)phthalimide (II) were r₁ = 0.14 and r₂ 1.56. The alternating copolymers were studied by ¹H-NMR and ¹³C-NMR spectroscopy. The alternating copolymer of N-(4-vinylphenyl)phthalimide with methyl acrylate was hydrazinolyzed to form the alternating copolymer of methyl acrylate with p-aminostyrene. Hydrazinolysis of the alternating copolymer of methyl acrylate with N-vinyl phthalimide removed the phthalimide moiety and generated vinyl amine units which readily cyclized with neighboring methyl acrylate units to form copolymers that contained five-membered lactam rings. The infrared (IR) spectra of the hydrazinolyzed products contain bands due to amine or amide groups and are devoid of the characteristic bands of the phthalimide ring.     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

One‐ and two‐dimensional NMR characterization of N‐vinyl‐2‐pyrrolidone/methyl acrylate copolymers

N‐vinyl‐2‐pyrrolidone/methyl acrylate (V/M) copolymers were prepared by free‐radical bulk polymerization using benzoyl peroxide as an initiator. The copolymer composition of these copolymers was calculated from ¹H NMR spectra. The radical reactivity ratios for N‐vinyl‐2‐pyrrolidone (V) and methyl acrylate (M) were r_V = 0.09, r_M = 0.44. These reactivity ratios for the copolymerization of V and M were determined using the Kelen–Tudos and nonlinear least‐squares error‐in‐variable methods. The ¹³C{¹H} and ¹H NMR spectra of these copolymers overlapped and were complex. The complete spectral assignment of the ¹³C and ¹H NMR spectra were done with distortionless enhancement by polarization transfer and two dimensional ¹³C‐¹H heteronuclear single quantum correlation spectroscopic experiments. The two‐dimensional ¹H‐¹H homonuclear total correlation spectroscopic NMR spectrum showed the various bond interactions, thus inferring the possible structure of the copolymers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2225–2236, 2002     

Synthesis and characterization of biodegradable triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] by atom transfer radical polymerization

Biodegradable poly(tert‐butyl acrylate)–poly[(R)‐3‐hydroxybutyrate]–poly (tert‐butyl acrylate) triblock copolymers based on bacterial poly[(R)‐3‐hydroxybutyrate] (PHB) were synthesized by atom transfer radical polymerization. The chain architectures of the triblock copolymers were confirmed by ¹H NMR and ¹³C NMR spectra. Gel permeation chromatography analysis was used to estimate the molecular weight characteristics and lengths of the PHB and poly(tert‐butyl acrylate) blocks of the copolymers. The thermal properties of the copolymers were studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA showed that the triblock copolymers underwent stepwise thermal degradation and had better thermal stability than their respective homopolymers, whereas DSC analyses showed that a microphase‐separation structure was formed only in the triblock copolymers with the longer PHB block. As a similar result, from wide‐angle X‐ray diffraction experimentation, the crystalline phase of PHB could not be seen evidently in the triblock copolymers with the shorter PHB block. The enzymatic hydrolysis of the copolymer films was carried at 37 °C and pH 7.4 in a potassium phosphate buffer with an extracellular PHB depolymerase from Penicillum sp. The biodegradability of the triblock copolymers increased with an increase in the PHB block content. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4857–4869, 2005     

Enantioselective,alternating copolymerization of carbon monoxide and olefins

Enantioselective, alternating copolymerizations of carbon monoxide with styrene, dicyclopentadiene, and methylcyclopentadiene dimer were carried out with a palladium catalyst modified by 1,4‐3,6‐dianhydro‐2,5‐dideoxy‐2,5‐bis(diphenyl phosphino)‐L ‐iditol. Chiral diphosphine was proven to be effective at enantioselective copolymerization. In the copolymers, some of the second double bonds of alternating poly(1,4‐ketone) were carbonylated. Optical rotation, elemental analysis, and spectra of ¹H NMR, ¹³C NMR, and IR showed that the copolymers had isotactic, alternating poly(1,4‐ketone) structures. An oxidant and an organic acid were the promoters of the copolymerization. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2919–2924, 2000     

Microstructural characterization of acrylonitrile/pentyl acrylate copolymers by one and 2‐D NMR spectroscopy

Acrylonitrile/pentyl acrylate (A/P) copolymers of different monomer composition were prepared by solution polymerization using benzoyl peroxide as initiator. Copolymer compositions were determined by elemental analysis and quantitative ¹³C¹H‐NMR spectroscopy. The comonomer reactivity ratios, determined by both Kelen Tudos (KT) and nonlinear error in variables (EVM) methods are r_A = 0.75 and r_p = 0.45. 2‐D heteronuclear correlation spectroscopy (HSQC) was used to simplify the complex ¹H spectra of A/P copolymers in terms of configurational and compositional sequences. The microstructure was obtained in terms of the distribution of A‐ and P‐ centered triad sequences from ¹³C¹H‐NMR spectra of the copolymers. The copolymerization mechanism was found to follow a first order Markov Model. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 533–543, 1999     

Polymerization of coordinated monomers. XVIII. Sequence distribution in methyl acrylate–styrene copolymers prepared in the presence of zinc chloride

Methyl acrylate and styrene have been copolymerized in the presence of zinc chloride either by photoinitiation or spontaneously. The copolymerization mechanism is investigated by analyses of copolymers composition and monomer sequence distribution. The resulting copolymers are not always alternating, their composition being dependent especially on the monomer feed ratio. Appreciable deviation to higher methyl acrylate unit content from an equimolar composition occurs at monomer feed fractions of methyl acrylate over 0.7. The larger deviation is induced by higher temperature, by photoirradiation, and by greater dilution of the reaction mixture with toluene. The ¹³C-NMR spectrum of the alternating copolymer shows a sharp singlet at the carbonyl region, whereas the spectra of random copolymers prepared by benzoyl peroxide initiation at 60°C show a triplet splitting at the carbonyl carbon region, irrespective of copolymer composition. The relative intensities of the triplet peaks for the random copolymers are in good correspondence to the contents of triad sequences calculated by means of conventional radical copolymerization theory. These results clearly indicate that the carbonyl splitting is caused predominantly by variation of the monomer sequence and not by variation of the stereosequence. The monomer sequence distribution in the copolymers is thus directly and quantitatively measured from the split carbonyl resonance. Although the same triplet splitting appears in the spectra of methyl acrylate–rich copolymers prepared in the presence of zinc chloride at high feed ratios (>0.7) of methyl acrylate, the relative intensities of the split peaks do not fit the sequence distributions of random copolymers calculated by means of the Lewis–Mayo equation. The copolymerization yielding these peculiar sequences and the alternating sequence in the presence of zinc chloride is fully comprehended by a copolymerization mechanism proceeding between two active coordinated monomers, i.e., the ternary molecular complex composed of zinc chloride, methyl methacrylate, and styrene, and the binary molecular complex composed of zinc chloride and methyl methacrylate.     

Stereostructures of hydrogenated poly(1,4‐(1‐arylbutadienes)) prepared by anionic initiators studied by means of NMR

Poly(1,4‐(1‐phenylbutadiene)) (poly1BP) and poly(1,4‐(1‐biphenylylbutadiene)) (poly1BPB) polymerized anionically in tetrahydrofuran (THF) have microstructures of 90.9 and 96.4% of 1,4 units, and 9.1 and 3.6% of 3,4 units, respectively, as determined by 400 MHz ¹H NMR. However, poly(1,4‐(1‐naphthylbutadiene)) (poly1NB) and poly(1,4‐(1‐phenanthrylbutadiene)) (poly1PAB) have 1,4 structures only. The ¹³C NMR spectra of the alternating copolymers of arylethylenes and ethylene obtained by hydrogenation of the poly(1,4‐(1‐arylbutadienes)) show a fine structure that can be attributed to dyad or triad stereosequences. These spectra indicate that the alternating (arylethylene/ethylene) copolymers prepared from poly1BPB, poly1NB, and poly1PAB slightly favor isotactic structures.     

Alternating ethylene–alkyl acrylate copolymers. II. Polymer properties

Properties such as viscosity correlations and spectral data of alternating ethylene–ethyl acrylate copolymers are described. The proton and ¹³C-NMR spectra show that there is a considerable amount of tacticity in these polymers. Although the alternating configuration predominates, there is also some random structure present. Terpolymers were prepared with cure-site monomers, such as 2-chloroethyl acrylate. The terpolymers were compounded with carbon black and cured to give vulcanizates with excellent properties. The cured products are resistant to oil, water, heat, and oxidation. They also have good low temperature properties (stiffening temperature ?31°C, brittleness temperature ?50°C), tensile properties (tensile strength 17.2 MPa, elongation at break 250%) and compression sets (25% at 150°C for 70 hr).     

Determination of coisotacticities of some alternating styrene–acrylic copolymers by NMR spectra

Coisotacticities σ for some alternating copolymers were determined through the analyses of their CH₃O, CH₃ and CH₂ proton NMR spectra; styrene–methyl methacrylate (σ = 0.56), styrene-methyl acrylate (σ = 0.53), styrene–methyl α-chloroacrylate (σ = 0.69), styrene–methacrylonitrile (σ = 0.19), styrene–methacrylamide (σ = 0.16), α-methylstyrene–methyl methacrylate (σ = 0.21), and α-methylstyrene–methyl acrylate (σ = 0.53) were studied. It was found that a terminal model or Bernoullian trial prevails in these complexed copolymerizations with diethylaluminum chloride. The influence of monomer structure on σ values is discussed.     

Reactivity ratios and microstructure determination of vinyl acetate–alkyl acrylate copolymers by NMR spectroscopy

(Vinyl acetate)/(ethyl acrylate) (V/E) and (vinyl acetate)/(butyl acrylate) (V/B) copolymers were prepared by free radical solution polymerization. ¹H-NMR spectra of copolymers were used for calculation of copolymer composition. The copolymer composition data were used for determining reactivity ratios for the copolymerization of vinyl acetate with ethyl acrylate and butyl acrylate by Kelen-Tudos (KT) and nonlinear Error in Variables methods (EVM). The reactivity ratios obtained are r_v = 0.03 ± 0.03, r_E = 4.68 ± 1.70 (KT method); r_v = 0.03 ± 0.01, r_E = 4.60 ± 0.65 (EV method) for (V/E) copolymers and r_v ? 0.03 ± 0.01, r_B ? 6.67 ± 2.17 (KT method); r_v = 0.03 ± 0.01, r_B = 7.43 ± 0.71 (EV method) for (V/B) copolymers. Microstructure was obtained in terms of the distribution of V- and E-centered triads and V- and B-centered triads for (V/E) and (V/B) copolymers respectively. Homonuclear ¹H 2D-COSY NMR spectra were also recorded to ascertain the existence of coupling between protons in (V/E) as well as (V/B) copolymers. © 1995 John Wiley & Sons, Inc.     

19F- and 1H-NMR spectra of tetrafluoroethylene–propylene copolymers

High resolution 94-MHz ¹⁹F- and 100-MHz ¹H-NMR spectra were measured on a series of tetrafluoroethylene (TFE)-propylene (P) copolymers having a range of composition (TFE/P molar ratio = 37/63–55/45) and polymerized at different temperatures (?23, 25 and 65°C). The spectra were analyzed in relation to copolymer compositions. The assignment of ¹⁹F resonance in terms of tetrads proposed previously was confirmed, and the tentative assignment of ¹H resonances was proposed in terms of triads. The spectra thus interpreted revealed the sequence distribution of the copolymers. Copolymer compositions calculated from NMR spectra and elemental analysis agreed rather well with each other. Monomer reactivity ratios were calculated from the sequence distributions and compared with those obtained from the elemental analysis. It was observed that highly alternating copolymers are obtained in this system over a wide range of monomer composition at lower temperatures and that a deviation from alternancy increases slightly with rising polymerization temperature.     

Simple synthesis of zwitterionic diblock copolymers for the application on metal nanoparticles preparation

AB diblock copolymers of poly(2-(dimethylamino)ethyl metharylate-block-potassiurn acrylate) were prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization. The structure of the block polymer was determined by the nuclear magnetic resonance (NMR) spectroscopy and the gel permeation chromatography. Moreover, it has also been shown that the diblock copolymers exhibit aggregate as function of the pH according to the result of ¹H-NMR spectroscopy, FT-IR absorption spectra, UV-vis transmittance spectroscopy, transmission electron microscopy and ultrasonic particle size analyzer. The result was attributed that such AB diblock copolymers were tailored to undergo pH-induced self-assembly. Furthermore, the aggregate can be as template of metal nanoparticles preparation, and the sizes of the aggregate, in turn, strongly control nanoparticle sizes.     

Controlled alternating copolymerization of St with MAh in the presence of DBTTC

The copolymerization of styrene (St) with maleic anhydride (MAh) performed at 22 °C in the presence of dibenzyl trithiocarbonate exhibits controlled nature evidenced by: narrow molecular weight distribution, controlled molecular weight and first-order polymerization kinetics. The composition analysis of the copolymers obtained by ¹³C NMR spectra shows the molar fraction of St in obtained copolymers is almost equal to 0.5 throughout the copolymerization. The sequence structure of the copolymer was obtained from DEPT experiments by recording the spectra at π/4 and 3π/4, and then combining them together, the results showed that the copolymers obtained possessed well-defined alternating structure. The experiment shows that charge-transfer-complex formed from St and MAh participates in both initiation and chain growth throughout the copolymerization.     

Radical copolymerization of acrylic monomers—III stereochemical configuration of methyl methacrylate-phenyl acrylate copolymers

The kinetics of the copolymerization of methyl methacrylate with phenyl acrylate in solution at low conversions have been examined. The ¹[H]NMR spectra of copolymers show some special features which are explained by taking into account the composition and the stereochemical configuration of copolymer sequences in terms of methyl methacrylate centered triads.     

Determination of microstructure and glass-transition temperature of acrylonitrile-methyl acrylate copolymers by 13C-NMR spectroscopy

Acrylonitrile-methyl acrylate (A/M) copolymers of different monomer compositions were prepared by bulk polymerization using free radical initiator (benzoyl peroxide). Copolymer compositions were determined by elemental analyses and comonomer reactivity ratios were determined by the nonlinear least squares errors-in-variables methods (EVM). Terminal and penultimate reactivity ratios have been calculated using the observed monomer triad sequence distribution determined from ¹³C{¹H}-NMR spectra. The triad sequence distribution was used to calculate diad concentrations, conditional probability parameters, number-average sequence lengths, and run number in the copolymers. The observed triad sequence concentrations determined from ¹³C{¹H}-NMR spectrum agreed well with those calculated from reactivity ratios. Glass transition temperatures (T_g) of various copolymers determined from DSC gave good agreement with those obtained from NMR. © 1992 John Wiley & Sons, Inc.     

Infrared spectroscopic analysis of poly(methyl acrylate-co-styrene)

Methyl acrylate–styrene copolymers of different copolymer compositions were free-radically prepared. The relative intensities of the carbonyl frequencies of the methyl acrylate units at v 1730 cm^?1 were correlated with the copolymer composition. The positions and shapes of the carbonyl bands in the infrared absorption spectra of the copolymers-dissolved in chloroform, were shown to depend on the composition of the copolymers and upon the presence of different proportions of methyl acrylate centered triads. The results obtained by infrared spectroscopy were compared with those obtained by ¹³C-NMR. Infrared spectra may be used to yield information about both the copolymer composition and the triad sequence distribution.     

Synthesis and characterization of graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates by atom transfer radical polymerization

Graft copolymers of poly(vinyl chloride) with styrene and (meth)acrylates were prepared by atom transfer radical polymerization. Poly(vinyl chloride) containing small amount of pendent chloroacetate units was used as a macroinitiator. The formation of the graft copolymer was confirmed with size exclusion chromatography (SEC), ¹H NMR and IR spectroscopy. The graft copolymers with increasing incorporation of butyl acrylate result in an increase of molecular weight. One glass transition temperature (T_g) was observed for all copolymers. T_g of the copolymer with butyl acrylate decreases with increasing content of butyl acrylate.