Isolated Cu(I) sites supported on β-cyclodextrin: an efficient π-complexation adsorbent for thiophene capture

A novel π-complexation adsorbent is fabricated by grafting Cu(I)-containing molecule precursors onto β-cyclodextrin. The adsorbent provides a molecular-level dispersion of Cu(I), which is particularly beneficial to the adsorptive removal of aromatic sulfur thiophene, and is impossible to be realized through the conventional thermal method.     

Oriented Ultrathin π-complexation MOF Membrane for Ethylene/Ethane and Flue Gas Separations

Rational design and engineering of high-performance molecular sieve membranes towards C₂H₄/C₂H₆ and flue gas separations remain a grand challenge to date. In this study, through combining pore micro-environment engineering with meso-structure manipulation, highly c-oriented sub-100 nm-thick Cu@NH₂-MIL-125 membrane was successfully prepared. Coordinatively unsaturated Cu ions immobilized in the NH₂-MIL-125 framework enabled high-affinity π-complexation interactions with C₂H₄, resulting in an C₂H₄/C₂H₆ selectivity approaching 13.6, which was 9.4 times higher than that of pristine NH₂-MIL-125 membrane; moreover, benefiting from π-complexation interactions between CO₂ and Cu(I) sites, our membrane displayed superior CO₂/N₂ selectivity of 43.2 with CO₂ permeance of 696 GPU, which far surpassed the benchmark of other pure MOF membranes. The above multi-scale structure optimization strategy is anticipated to present opportunities for significantly enhancing the separation performance of diverse molecular sieve membranes.     

Monohydrates of cuprous chloride and argentous chloride: H2O⋅⋅⋅CuCl and H2O⋅⋅⋅AgCl characterized by rotational spectroscopy and ab initio calculations

Pure rotational spectra of the ground vibrational states of ten isotopologues of each of H(2)O???CuCl and H(2)O???AgCl have been measured and analyzed to determine rotational constants and hyperfine coupling constants for each molecule. The molecular structure and spectroscopic parameters determined from the experimental data are presented alongside the results of calculations at the CCSD(T) level. Both experiment and theory are consistent with structures that are nonplanar at equilibrium. The heavy atoms are collinear while the local C(2) axis of the water molecule intersects the axis defined by the heavy atoms at an angle, φ = 40.9(13)° for Cu and φ = 37.4(16)° for Ag. In the zero-point state, each molecule is effectively planar, undergoing rapid inversion between two equivalent structures where φ has equal magnitude but opposite sign. The equilibrium geometry has C(s) symmetry, however. The ab initio calculations confirm that the timescale of this inversion is at least an order of magnitude faster than that of rotation of the molecule in the lowest rotational energy levels. The molecular geometries are rationalized using simple rules that invoke the electrostatic interactions within the complexes. Centrifugal distortion constants, Δ(J) and Δ(JK), nuclear quadrupole coupling constants, χ(aa)(Cu), χ(aa)(Cl), (χ(bb) - χ(cc))(Cu), and (χ(bb) - χ(cc))(Cl), and the nuclear spin-rotation constant of the copper atom, C(bb)(Cu)+C(cc)(Cu), are also presented.     

Catalytic enantioselective Grignard Nozaki-Hiyama methallylation from the alcohol oxidation level: chloride compensates for π-complex instability

Methallyl chloride serves as an efficient allyl donor in highly enantioselective Grignard Nozaki-Hiyama methallylations from the alcohol or aldehyde oxidation level via iridium catalyzed transfer hydrogenation. Under identical conditions, methallyl acetate does not react efficiently. Double methallylation of 1,3-propanediol provides the C(2)-symmetric adduct as a single enantiomer, as determined by HPLC analysis.     

A novel strategy for synthesis of amphiphilic π-shaped copolymers by RAFT polymerization

The amphiphilic π-shaped copolymers with narrow molecular weight distribution (M_w/M_n = 1.04-1.09) based on polystyrene (PSt) and poly(ethylene glycol) have been synthesized successfully. The reversible addition-fragmentation transfer (RAFT) polymerization of St in the presence of dibenzyl trithiocarbonate and N,N′-azobis(isobutyronitrile) (AIBN) yielded macro RAFT agent PSt-SC(S)S-PSt, subsequent reaction with excess maleic anhydride (MAh) at 80 °C in tetrahydrofuran afforded the PSt-MAh-SC(S)S-MAh-PSt. It was used as RAFT agent in the RAFT polymerization of St, and finally the amphiphilic π-shaped copolymers were obtained by the reaction of MAh with hydroxyl-terminated poly(ethylene glycol methyl ether) at 90 °C for 48 h. Their structures were confirmed by FT-IR and ¹H NMR spectra, and their molecular weight and molecular weight distribution were measured by gel permeation chromatography.     

Panchromatic ruthenium sensitizer based on electron-rich heteroarylvinylene π-conjugated quaterpyridine for dye-sensitized solar cells

The first example of a heteroarylvinylene π-conjugated quaterpyridine Ru(II) sensitizer (N1044) was synthesized and used in dye-sensitized solar cells; the dye has an effective panchromatic absorption band, covering the entire visible spectrum up to the NIR region, and superior electrochemical characteristics (HOMO/LUMO and bandgap energies) with respect to previous representative Ru(II) bi- and quaterpyridine sensitizers. A record IPCE curve ranging from 360 to 920 nm has been measured with a maximum of 65% at 646 nm and still 33% efficiency at 800 nm; this leads to substantially increased photocurrent (19.2 mA cm(-2)) when compared to the prototype N719 Ru(II) sensitizer.     

Surface tension studies on the complexation of dodecylpyridinium chloride byβ-cyclodextrin in aqueous electrolyte solutions

Surface tension measurements have been performed at 25° C for aqueous mixtures of dodecylpyridinium chloride and -cyclodextrin in 0.1 M NaCl. Data analyses assuming 1:1 stoichiometry were applied to estimate the complexation constant of the host-guest complex formation. The technique yields consistent results for solutions with a swamping, constant concentration of a simple inorganic electrolyte.     

Response of Surface‐Plasmon Resonance Sensor Based on Gold Surfaces Modified by Self‐Assembled Monolayer to Nonionic Surfactants

Abstract

A chemical sensor for the determination of nonionic surfactants (NISs) based on surface‐plasmon resonance (SPR) phenomenon was fabricated using a gold thin film, the surface of which was modified with a self‐assembled monolayer (SAM). Stearylmercaptan was used for the SAM constituent. The magnitude of the angle shift of SPR sensor to NISs increases in this order: Triton X‐100<heptaethyleneglycol dodecyl ether (HEEG)<hexaethyleneglycol dodecyl ether (HEG)<pentaethyleneglycol dodecyl ether (PEG). This order of magnitude of angle shift is in accord with the sequence of the hydrophobicity of the NISs. The linear relationships between Δθ (the change in the resonance angle relative to the baseline value) and the concentration of NISs were obtained in the concentration range from 2×10^?6 M to 1×10^?5 M. The coexistence of common inorganic cations and anions at 100 times excess to the Triton X‐100 gives only a positive error less than ca. +5%. The coexistence of an anionic surfactant (sodium dodecylbenzene sulfonate) at 10 times excess to the Triton X‐100 gives a very serious positive error of ca. +320%. This serious positive error was completely eliminated by using the flow system with an anion‐exchange resin column.     

Folding of a supramolecular framework based on a tetrametallic clip driven by π-π interactions

Supramolecular extended frameworks based on a rotational molecular clip and having the same "primary structure" can exhibit either an unfolded or a folded framework. This process is driven by intramolecular π-π interactions, resulting in the formation of an infinite π-stacked column within the folded supramolecular framework.     

The adsorption of methamphetamine on Ag nanoparticles dispersed in agarose gel – Detection of methamphetamine in fingerprints by SERS

Surface-enhanced Raman scattering (SERS) has been used to investigate the adsorption of methamphetamine hydrochloride (MA) on AgNPs surfaces characterized by the dispersion of AgNPs on agarose gel (AgNPs/Agar). The AgNPs/Agar was characterized by transmission electron microscopy (TEM) as being formed by AgNPs with a mean diameter of 13.5 nm. The AgNPs/Agar films presented a surface plasmon resonance absorption band centered at 421 nm. SERS spectra, excited at 632.8 nm, of MA adsorbed onto AgNPs/Agar films were recorded for MA concentrations down to 1.0 × 10⁻⁵ mol L^-1. The results have also shown that MA adsorbs on the Ag surface forming ionic pairs with adsorbed chloride following a Frumkin adsorption isotherm with a ΔG_ads of −24 kJ mol^-1 and a g parameter characteristic of attractive lateral interaction. The AgNPs/Agar SERS substrate was further evaluated for MA detection on latent fingerprints (LFP). The AgNPs/Agar films prove to be a suitable substrate for recording fingerprints contaminated with MA making possible the detection of ca. 190 μg of MA, before and after LFP development. The SERS signal of MA adsorbed onto AgNPs/Agar films remained stable for at least 180 days.     

Monolayer 1T and 1T′ MoSO as Promising Electrocatalyst for Hydrogen Evolution based on First Principle Calculations

Molybdenum disulfide (MoS₂) has been regarded as one of the most promising candidates for replacing Pt group noble metals as an efficient electrocatalyst to enhance the hydrogen evolution reaction (HER) in consideration of its relatively high earth abundance. Recent studies show that the catalytic efficiency of MoS₂ for HER can be promoted by the presence of 1T-phase MoS₂. It is hard to precisely control the formation of 1T-MoS₂, however, due to its metastability relative to 2H-MoS₂. Elevating the stability of 1T phase allotrope is therefore of great importance and could be realized by replacing divalent S with monovalent elements or groups according to crystal field theory, which has been demonstrated through our first-principles density functional theory (DFT) calculation results. Differential Gibbs free energy analysis for hydrogen adsorption (ΔG_H*) suggest that 1T and 1T′ MoSO (O doped MoS₂) might be taken as potential candidate catalysts for HER process with better performance than 1T and 1T′ MoS₂. We also propose a probable approach to synthesize 1T and 1T′ MoSO under oxidation circumstance environment of graphene oxide.     

Comparing π-complexation capabilities of ionic liquids containing silver(I) and copper(I) ions by headspace single drop microextraction in combination with high-performance liquid chromatography

Selective π-complexation capabilities of silver(I) and copper(I) ions can be effectively facilitated in ionic liquids. To understand the effects of environmental factors that influence the π-complexation of these metal ions with analytes, techniques that employ small volumes of ionic liquid that can be readily analyzed are desired. In this study, headspace single drop microextraction coupled with HPLC is used to investigate a diverse set of environmental factors on the metal ion-mediated complexation with aromatic compounds in ionic liquid media. Silver(I) and copper(I) bis[(trifluoromethyl)sulfonyl]imide salts were both studied by dissolving them in the 1-decyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ionic liquid and employing the mixture as extraction media for aromatic compounds. Water and acetonitrile within the sample solution were observed to interfere with the complexation of silver(I) ions and aromatic compounds, while ethylene glycol and triethylene glycol did not. The temperature and extraction times were optimized to fully facilitate the π-complexation capabilities of metal ions in ionic liquid media. Partition coefficients between the sample headspace and metal ion were determined using a three-phase equilibria model. Although no discernable difference in analyte partitioning between the headspace and ionic liquid solvent was observed, analyte partition coefficients to silver(I) ion tended to be greater compared to copper(I) ion.     

Fast separations of chiral β-blockers on a cellulose tris(3,5-dimethylphenylcarbamate)-coated zirconia monolithic column by capillary electrochromatography

Cellulose tris(3,5-dimethylphenylcarbamate) (CDMPC) is an excellent chiral selector for enantioseparation of a wide variety of chiral compounds. The monolithic chiral columns are becoming popular in liquid chromatography and capillary electrochromatography. In this work, we present the fast separation of chiral β-blockers on a CDMPC-modified zirconia monolithic column by capillary electrochromatography (CEC). The porous zirconia monolithic capillary column was prepared by using the sol-gel technology and then zirconia surface modified with CDMPC. The enantioseparations were performed in reversed-phase (RP) eluents of a phosphate solution (pH 4.4) modified with acetonitrile or alcohol. The enantioseparations of a set of eight chiral β-blockers were achieved in less than one minute. Influences of the applied voltage, column temperature, concentration of acetonitrile and the type of alcohol as the organic modifier in the mobile phase, and sample injection time on enantioseparation were investigated. CEC separations at the applied voltage of 10 kV and 15 °C in the ACN-modified mobile phase provided the best resolutions for the analytes studied. Run-to-run and day-to-day repeatabilities of the column in the RP-CEC separation were less than 1 and 2%, respectively.     

Assessment of Defects and Collapsed Sites in Self-Assembled Alkanethiol Monolayer on Gold by Cyclic Voltammetry and A.C.Impedance

Thespontaneousself-assemblytechniqueprovidesaconvenientandpowerfultooltopreparecompactmonolayerswithwell-definedcomposition,structureandthicknessl.However,theexistenceofstrUcturaldefectsanddisorderinself-assemblymayinfluenceitspropertiesinmanyfields.Soitisincreasinglyclearthatthecharacterizationofdefectsisanimportantissuewhichneedstobeaddressedinmanyapplications.Thepurposeofthisworkistostudythedefectsand"collapsed"sitesinAulthiolmonolayerbycyclicvoltanunetryandelectrochemicalimpedancespectros…     

Controlling Energy Gaps of π-Conjugated Polymers by Multi-Fluorinated Boron-Fused Azobenzene Acceptors for Highly Efficient Near-Infrared Emission

We demonstrate that multi-fluorinated boron-fused azobenzene (BAz) complexes can work as a strong electron acceptor in electron donor-acceptor (D-A) type π-conjugated polymers. Position-dependent substitution effects were revealed, and the energy level of the lowest unoccupied molecular orbital (LUMO) was critically decreased by fluorination. As a result, the obtained polymers showed near-infrared (NIR) emission (λ_PL=758–847 nm) with high absolute photoluminescence quantum yield (Φ_PL=7–23%) originating from low-lying LUMO energy levels of the BAz moieties (−3.94 to −4.25 eV). Owing to inherent solid-state emissive properties of the BAz units, deeper NIR emission (λ_PL=852980 nm) was detected in film state. Clear solvent effects prove that the NIR emission is from a charge transfer state originating from a strong D-A interaction. The effects of fluorination on the frontier orbitals are well understandable and predictable by theoretical calculation with density functional theory. This study demonstrates the effectiveness of fluorination to the BAz units for producing a strong electron-accepting unit through fine-tuning of energy gaps, which can be the promising strategy for designing NIR absorptive and emissive materials.     

Elaboration of a Lewis acid-free protocol for the alkylation of silicon-containing π-donors by β-arylthioalkyl chlorides

Hexafluoroisopropanol (HFIP) was found to be a powerful electrophilic activator of covalent reagents. Due to this effect the title reaction was shown to proceed under mild conditions in the absence of any Lewis acid catalysts to give the respective products of C-alkylation in good to excellent yields.     

Efficient one-pot method for the synthesis of bis-propargylamines by the reaction of terminal acetylenes with 1,5,3-dioxazepanes catalyzed by cоpper chloride

An efficient method for the synthesis of N-substituted bis-propargylamines and bis(alkadiynyl)amines was developed. The method consists of the CuCl-catalyzed aminomethylation of terminal acetylenes and α,ω-diacetylenes with N-substituted 1,5,3-dioxazepanes.     

Three Dimensional Monolayer of 3‐Mercaptopropionic Acid Assembled on Gold Nanoparticles for Electrochemical Determination of Trace Cu(II)

Abstract

The electrochemical behavior of Cu(II) was investigated on three‐dimensional 3‐mercaptopropionic acid (MPA) assembled on gold nanoparticle‐modified glassy carbon (GNP/GC) electrode. The results demonstrated that the MPA monolayer inhibited the charging current while promoted the response of accumulated Cu(II) on GNP/GC electrode. The effects of pH, scan rate, and accumulation time on the voltammetric behavior of Cu(II) on the MPA/GNP/GC electrode were studied. The MPA modified electrode presented a voltammetric response linearly proportional to the Cu(II) concentration from 0.1 µg/l to 100 µg/l, with a detection limit of 3.2 ng/l. Moreover, this electrode was successfully applied to the determination of Cu(II) in tap water.     

Investigating the effect of π-configurations and methoxy substitution on donor and π- spacers based dyes for dye-sensitized solar cell applications–computational approach

Research on Chemical Intermediates - Triphenylamine and methoxy substituted triphenylamine-based dyes are examined by density-functional theory and time-dependent density-functional theory. The...     

A paradigm for blue- or red-shifted absorption of small molecules depending on the site of π-extension

Benzannulation of aromatic molecules is often used to red-shift absorption and emission bands of organic and inorganic, molecular, and polymeric materials; however, in some cases, either red or blue shifts are observed, depending on the site of benzannulation. A series of five platinum(II) complexes of the form (N(∧)N(∧)N)PtCl are reported here that illustrate this phenomenon, where N(∧)N(∧)N represents the tridentate monoanionic ligands 2,5-bis(2-pyridylimino)3,4-diethylpyrrolate (1), 1,3-bis(2-pyridylimino)isoindolate (2), 1,3-bis(2-pyridylimino)benz(f)isoindolate (3), 1,3-bis(2-pyridylimino)benz(e)isoindolate (4), and 1,3-bis(1-isoquinolylimino) isoindolate (5). For this series of molecules, either a blue shift (2 and 3) or a red shift (4 and 5) in absorption and emission maxima, relative to their respective nonbenzannulated compounds, was observed that depends on the site of benzannulation. Experimental data and first principles calculations suggest that a similar HOMO energy level and a destabilized or stabilized LUMO with benzannulation is responsible for the observed trends. A rationale for LUMO stabilization/destabilization is presented using simple molecular orbital theory. This explanation is expanded to describe other molecules with this unusual behavior.