3D printing of a palladium-alumina cermet monolithic catalyst: catalytic evaluation in microwave-assisted cross-coupling reactions

A straightforward manufacture strategy is proposed to obtain an efficient and robust palladium-alumina (Pd⁰/Al₂O₃) cermet monolithic catalyst, specifically designed to perform safe microwave assisted organic synthesis (MAOS). In this approach, a cermet catalyst with high surface area, controlled composition and adapted shape and dimensions to a microwave reactor vessel is generated via 3D printing technology and sintering. The resulting catalyst has been explored in heterogeneous Suzuki, Sonogashira, Stille and Heck cross-coupling reactions, in MAOS. The Pd⁰ catalyst is permanently active, stable, without leaching and can be recycled and reused at least 200 reaction cycles. The generation of hot spots, sparking or hazardous discharges is controlled by the effective immobilization of the palladium in the monolithic structure during the reaction. The palladium content is forming part of both the internal and external structure, providing greater mechanical resistance and catalytic activity with respect to the basic ceramic material (alumina).     

二氧化硅负载胂钯(0)配合物催化酰氯和芳基碘与四苯硼化钠的苯基化反应

氯丙基三乙氧基硅烷依次与气相法二氧化硅、二苯胂钾、氯化钯作用, 再用水合肼还原, 合成了二氧化硅负载的胂钯(0)配合物. 该配合物是酰氯及芳基碘化物与四苯硼化钠苯基化反应的有效催化剂, 为苯基酮及不对称联苯的合成提供了简便且实用的新方法.     

Synthesis and properties of a CO oxidation catalyst based on plasma-chemical silicon carbide,titanium dioxide,and palladium

A catalyst based on plasma-chemical β-SiC and TiO₂ with a palladium content of 10 wt % has been synthesized. The dependence of the rate of the CO oxidation reaction at room temperature and low CO concentrations (less than 100 mg/m³) on the β-SiC content has been studied. It has been found that with a β-SiC content of 8 to 10 wt %, the catalyst has a maximum reaction rate, which is three times that on a catalyst based on pure TiO₂ including palladium clusters. The catalysts are promising for use in catalytic and photocatalytic air purification systems.     

Enantioselectivity in the synthesis of 3,5-disubstituted Δ-isoxazolines

The R-isomer of ISO-1, a 3,5-disubstituted Δ²-isoxazoline, has been implicated as a potential therapeutic agent for the treatment of Type 1 Diabetes via the antagonism of macrophage migration inhibitory factor (MIF). Δ²-Isoxazolines can be prepared by the palladium(II)-mediated cyclization of substituted β,γ-unsaturated oximes. While this reaction results in racemic mixtures, we have developed a stereoselective variant of this method based on the incorporation of an enantiomeric palladium complex in the reaction mixture. The use of chiral bisoxazoline ligands in the palladium(II)-mediated ring closure reaction has been shown to enhance the enantiomeric excess due to chirality at C5 of the Δ²-isoxazoline.     

聚-ω-(甲硒基)十一烷基硅氧烷钯(0)配合物的合成与催化性能

ω-氯代十一烷基三乙氧基硅烷依次用气相法二氧化硅固载、与甲硒基钠和氯化钯作用, 再用水合肼还原, 合成了气相法二氧化硅负载的聚-ω-(甲硒基)十一烷基硅氧烷钯(0)配合物. 该钯(0)配合物对丙烯腈和丙烯酸与芳基碘的Heck芳基化反应具有很高的催化活性, 为各种肉桂腈和肉桂酸的立体选择合成提供了方便实用的新途径.     

Synthesis and catalytic application of Pd complex catalysts: Atom‐efficient cross‐coupling of triarylbismuthines with haloarenes and acid chlorides under mild conditions

Palladium‐catalysed cross‐coupling reactions are some of the most frequently used synthetic tools for the construction of new carbon–carbon bonds in organic synthesis. In the work presented, Pd(II) complex catalysts were synthesized from palladium chloride and nitrogen donor ligands as the precursors. Infrared and ¹H NMR spectroscopic analyses showed that the palladium complexes were formed in the bidentate mode to the palladium centre. The resultant Pd(II) complexes were tested as catalysts for the coupling of organobismuth(III) compounds with aryl and acid halides leading to excellent yields with high turnover frequency values. The catalysts were stable under the reaction conditions and no degradation was noticed even at 150°C for one of the catalysts. The reaction proceeds via an aryl palladium complex formed by transmetallation reaction between catalyst and Ar₃Bi. The whole synthetic transformation has high atom economy as all three aryl groups attached to bismuth are efficiently transferred to the electrophilic partner.     

Decarboxylative [4+2] Cycloaddition by Synergistic Palladium and Organocatalysis

A novel reaction based on synergistic catalysis, combining palladium‐ and organocatalysis has been developed. The palladium catalyst activates vinyl benzoxazinanones via a decarboxylation to undergo a [4+2] cycloaddition with iminium‐ion activated α,β‐unsaturated aldehydes. The reaction is demonstrated to proceed for a number of combinations of vinyl benzoxazinanones reacting with α,β‐unsaturated aldehydes, providing highly substituted vinyl tetrahydroquinolines in good to high yields, and excellent enantio‐ and diastereoselectivities (>98 % ee and >20:1 d.r.). The palladium catalyst used in the synergistic catalysis can be re‐used in a one‐pot sequential coupling reaction with an aromatic boronic acid forming the coupling product in 95 % yield, >20:1 d.r. and 99 % ee.     

Palladium(II) complexes of aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium

The formation of palladium(II) complexes with aliphatic amines and their oxidation by chloramine‐T in perchloric acid medium has been studied. The spectrophotometric studies showed the formation of 1:1 and 1:2 complexes between palladium(II) and amine in absence of HClO₄. An increase in [HClO₄] in reaction mixture suppresses the complex formation and in presence of [HClO₄] ～10^?3 mol dm^?3 only a 1:1 complex between palladium(II) and amine has been observed. The effect of Cl^? on the complex formation has also been studied. Palladium(II)‐catalyzed oxidation of these amines by chloramine‐T showed a first‐order dependence of rate with respect to each—oxidant, substrate, catalyst, and H⁺. The mechanism consistent with kinetic data for the oxidation process has been proposed in absence as well as in presence of initial [Cl^?]. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 603–612, 2002     

Synthesis of allylamides from allyl halides, carbon monoxide, and titanium-nitrogen complexes prepared from molecular nitrogen

4-Phenylbut-3-enamide could be synthesized from corresponding 3-chloroprop-2-enylbenzene, carbon monoxide (1 atm), and titanium-nitrogen complexes, prepared from Ti(OⁱPr)₄, Li, TMSCl, and molecular nitrogen (1 atm), using a palladium catalyst. The reaction proceeds via transmetalation of the titanium-nitrogen complex to an acylpalladium complex. P^tBu₃ as a ligand of the palladium catalyst, afforded a good result, and the amounts of Li and TMSCl affected the yield of amide. When the reaction was carried out using a bidentate ligand on the palladium complex under an atmosphere of argon instead of carbon monoxide, an allylamine derivative was obtained.     

Palladium- and Ruthenium-Catalyzed Intramolecular Carbene CAr−H Functionalization of γ-Amino-α-diazoesters for the Synthesis of Tetrahydroquinolines

A synthetic method to prepare tetrahydroquinoline-4-carboxylic acid esters has been developed through the transition-metal-catalyzed intramolecular aromatic C−H functionalization of α-diazoesters. Both [{Pd(IMes)(NQ)}₂] (IMes=1,3-dimesitylimidazol-2-ylidene, NQ=1,4-naphthoquinone) and the first-generation Grubbs catalyst proved effective for this purpose. The ruthenium catalyst was found to be the most versatile, although in a few cases the palladium complex afforded better yields or selectivities. According to DFT calculations, Pd⁰- and Ru^II-catalyzed sp²-C_Ar−H functionalization proceeds through different reaction mechanisms. Thus, the Pd⁰-catalyzed reaction involves a Pd-mediated 1,6-H migration from the sp²-C_Ar−H bond to the carbene carbon atom, followed by a reductive elimination process. In contrast, electrophilic addition of the ruthenacarbene intermediate to the aromatic ring and subsequent 1,2-proton migration are operative in the Grubbs catalyst promoted reaction.     

A new palladium complex supported on magnetic nanoparticles and applied as an catalyst in amination of aryl halides,Heck and Suzuki reactions

A simple, efficient and less expensive protocol for the phosphine-free C–C coupling reactions and synthesis of anilines in the presence of 2-aminobenzamide complex of palladium supported on Fe₃O₄ magnetic nanoparticles (Pd(0)-ABA-Fe₃O₄) has been reported. The Suzuki reaction was carried out in water or PEG using phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaBPh₄). Pd(0)-ABA-Fe₃O₄ has been found promising for Heck reaction of butyl acrylate, styrene or acrylonitrile with aryl halides (including Cl, Br and I). Also, Pd(0)-ABA-Fe₃O₄ has been found as efficient catalyst for the amination of aryl halides using aqueous ammonia. The products have been obtained in short reaction times and high yields. The catalyst was easily separated using an external magnet from the reaction mixture and reused for several runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst has been examined by hot filtration and ICP-OES technique. The nanomagnetical catalyst was characterized by FTIR, TGA, XRD, VSM, TEM, SEM, EDS, DLS and ICP-OES techniques.     

Synthese von 5-substituierten 2-Phenyl-tetrazolen

The synthetical accessibility of the 2-phenyl-tetrazoles via 2-phenyl-tetrazole-5-carboxylic acid has been preparatively secured and a reaction is reported, which could be useful to get some more interesting results in the chemistry of these compounds. The¹H-NMR- and mass spectrometral behavior of the 2-phenyltetrazoles is examined and discussed.     

Pd‐Iminocarboxylate Complexes and Their Behavior in Ethylene Polymerization

Designing co‐catalyst‐free late transition metal complexes for ethylene polymerization is a challenging task at the interface of organometallic and polymer chemistry. Herein, a set of new, co‐catalyst‐free, single‐component catalytic systems for ethylene polymerization have been unraveled. Treatment of anthranilic acid with various aldehydes produced four iminocarboxylate ligands ( L1 – L4 ) in very good to excellent yield (75–92 %). The existence of 2‐((2‐methoxybenzylidene)amino) benzoic acid ( L1 ) has been unambiguously demonstrated using NMR spectroscopy, MS and single‐crystal X‐ray diffraction. A neutral Pd‐iminocarboxylate complex [{N O}PdMe(L1)] (N O=κ²‐N,O‐ArCHNC₆H₄CO₂ with Ar=2‐MeOC₆H₄) C1 was prepared by treating stoichiometric amount of L1.Na with palladium precursor. The identity of C1 was confirmed by 1–2D NMR spectroscopy and single‐crystal X‐ray diffraction studies. Along the same lines, palladium complexes C2 – C4 were prepared from ligands L2 – L4 respectively. In‐situ high‐pressure NMR investigations revealed that these Pd complexes are amenable to ethylene insertion and undergo facile β‐H elimination to produce propylene. These palladium complexes were then evaluated in ethylene polymerization reaction and various reaction parameters were screened. When C1 – C4 were exposed to ethylene pressures of 10–50 bar, formation of low‐molecular‐weight polyethylene was observed.     

Fe3O4‐SAHPG‐Pd0 nanoparticles: A ligand‐free and low Pd loading quasiheterogeneous catalyst active for mild Suzuki–Miyaura coupling and C?H activation of pyrimidine cores

This paper reports a green magnetic quasiheterogeneous efficient palladium catalyst in which Pd⁰ nanoparticles have been immobilized in self‐assembled hyperbranched polyglycidole (SAHPG)‐coated magnetic Fe₃O₄ nanoparticles (Fe₃O₄‐SAHPG‐Pd⁰). This catalyst has been used for effective ligandless Pd catalyzed Suzuki–Miyaura coupling reactions of different aryl halides with substituted boronic acids at room temperature and in aqueous media. Herein, SAHPG is used as support; it also acts as a reducing agent and stabilizer to promote the transformation of Pd^II to Pd⁰ nanoparticles. Also, this environmental friendly quasiheterogeneous catalyst is employed for the first time in the synthesis of new pyrimido[4,5‐b]indoles via oxidative addition/C? H activation reactions on the pyrimidine rings, which were obtained with higher yield and faster than when Pd(OAc)₂ was used as the catalyst. Interestingly, the above‐mentioned catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled several times with no significant decrease in the catalytic activity.     

Pd immobilized on polyamide based on melamine and terephalic acid as an efficient and recyclable catalyst for Suzuki‐Miyaura coupling reaction

A simple synthetic strategy of polyamide was described from melamine and terephalic acid via one‐step polycondensation. PdCl₂ was then immobilized on the polyamide (denoted as Pd/MPA). Melamine and terephalic acid not only acted as monomers but also provided the ligand sites to help the polyamide to coordinate with Pd(II). The Pd/MPA catalyst was characterized by FT‐IR, TGA, SEM, TEM, XPS, N₂ adsorption‐desorption and atomic absorption spectroscopy. The catalyst was used in Suzuki‐Miyaura coupling reaction of various aryl halides, including less reactive chlorobenzene and benzyl chloride, to give the coupling products in moderate to excellent yields. High turnover frequencies (TOF) up to 29400 h^‐1 can be also obtained. In addition, it behaved truly as a heterogeneous catalyst with high reusability after being recycled 6 times and palladium leaching was negligible during the process. This work provides a practical polyamide support to develop heterogeneous palladium catalysts with simple synthetic procedure and low cost.     

Immobilization of a palladium(II) bis(imidazolium) complex onto graphene oxide by noncovalent interactions: an efficient and recyclable catalyst for Suzuki–Miyaura reaction

In this research, the Suzuki–Miyaura coupling reaction catalyzed by a palladium(II) complex containing bis(imidazolium) ligand, Pd^II(BIM), immobilized on graphene oxide (GO) as heterogeneous, recyclable and active catalyst is reported. The catalyst, Pd^II(BIM)@GO, was characterized by FT-IR, diffuse reflectance UV–Vis spectroscopy, ICP, field emission scanning electron microscopy, energy-dispersive X-ray analysis, and elemental analysis. It was demonstrated that the GO-supported palladium(II) complex can act as an efficient catalyst and is reusable several times without a significant loss of their catalytic activity.     

An efficient and simple ligand from phthalandione for palladium-catalyzed Suzuki reaction in aqueous media

An efficient and simple ligand derived from phthalandione was used for palladium catalyzed Suzuki coupling reaction in water/ethanol (V/V = 2/1) under aerobic conditions. The reaction exhibited a high catalytic efficiency even with lower Pd loading (0.002 mol %). In this work, the catalyst could be successfully used in coupling reaction between various aryl halides with phenylboronic acid in excellent yields with high turnover number (TON) (the maximal TON was up to 49,000 for the reaction of bromobenzene with phenylboronic acid). Moreover, this new ligand had been elucidated by ¹H NMR, ¹³C NMR and X-ray crystal diffraction.     

二氧化硅负载的胂钯(0)配合物作为丙烯酸丁酯和丙烯酰胺芳基化反应高活性和高立体选择性的催化剂

A silica-supported arsine palladium(O) complex has been prepared from y-chloropropyltriethoxysilane via immobilization on fumed silica, followed by reaction with potassium diphenylarsenide and palladium chloride, and then reduction with hydrazine hydrate. The complex has been characterized by X-ray photoelectron spectroscopy (XPS) and it is a highly active and stereoselective catalyst for arylation of butyl acrylate and acrylamide with aryl halides, affording a variety of tram-butyl cinnamates and trans-cinnamamides in high yields.     

Synthesis of gasoline from syngas via dimethyl ether

Zeolite H-TsVM has been loaded with palladium by different methods. The properties of the resulting catalysts in gasoline synthesis from syngas via dimethyl ether depend on the way in which palladium was introduced. The catalysts have been characterized by ammonia temperature-programmed desorption (TPD), temperature-programmed reaction with hydrogen, and X-ray photoelectron spectroscopy. According to ammonia TPD data, use of a palladium ammine complex instead of palladium chloride reduces the concentration of strong acid sites and raises the concentration of medium-strength acid sites, thereby reducing the yield of C1–C4 hydrocarbons and increasing the yield of gasoline hydrocarbons. At T = 340°C, P = 100 atm, and GHSV = 2000 h^?1, the dimethyl ether conversion is 98–99%, the gasoline selectivity is >60%, the isoparaffin content of the product is ～61%, and the arene content is not higher than 29%.     

Synthesis of a polymer-capped palladium nanoparticles and its application as a reusable catalyst in oxidative coupling reaction of α-hydroxyketones and 1,2-diamines for preparation of pyrazines and quinoxalines

A novel method for the synthesis of pyrazines and quinoxalines has been developed using α-hydroxyketones and 1,2-diamines in the presence of cross-linked poly(4-vinylpyridine)-stabilized Pd(0) nanoparticles, [P4-VP]-PdNPs. The catalyst was easily prepared and characterized using various techniques such as FT-IR and UV–Vis spectroscopy, AAS, TEM, FESEM, EDX analysis and XRD. The results confirm a good dispersion of palladium nanoparticles on the polymer support. The catalyst displayed good catalytic activity when applied to the synthesis of quinoxalines via condensation of α-hydroxyketones with 1,2-diamines. A few pyrazine derivatives and various quinoxalines are prepared via coupling reaction of α-hydroxyketones and 1,2-diamines in high–excellent yields (81–99%) with short reaction times. The quinoxalines products were characterized by FT-IR, ¹H and ¹³C NMR spectroscopy, and the physical properties were compared to the literature values of known compounds. The advantages of the present method over conventional classical methods are rapid and very simple work-up, and the catalyst is reusable many times without a significant loss in its activity.