锂离子电池非水电解质锂盐的研究进展

新型电解质锂盐主要包括含螯合硼阴离子、螯合磷阴离子、全氟膦阴离子、烷基磺酸阴离子、全氟烷基、亚胺基的有机锂盐及有机铝酸锂盐.本文综述了近年来在新型电解质锂盐研究与探索方面的成果,介绍了锂离子电池电解质锂盐的合成方法、组成与结构、化学和电化学性能及其与结构的关系,并阐述今后电解质锂盐研究的可能发展方向及研究方法.     

三元锂离子电池容量衰减机理研究进展

三元锂离子电池主要是指使用镍钴锰酸锂（NCM）或镍钴铝酸锂（NCA）作为正极材料的锂离子电池,三元锂离子电池广泛应用于电动汽车、3C电子产品、储能等领域。然而,三元锂离子电池的循环寿命已成为其进一步发展的最大障碍,因此了解三元锂离子电池的容量衰退机理具有重要意义。三元锂离子电池的衰退机理主要包括五个方面：晶体结构的改变和相变、活性材料的损失、电解质的分解和消耗、可脱嵌锂离子的损耗以及固体电解质界面的形成。本文总结了近年来相关方面的研究进展,以期更全面地总结三元锂离子电池的容量衰减机理,并对三元锂离子电池的应用前景进行了展望。     

Electrochemistry of a lithium electrode in lithium polysulfide solutions

The effect of lithium polysulfides on the cycling of a lithium electrode and the corrosion rate of lithium cathodic deposits in sulfolane electrolytes is studied. Lithium polysulfides are found to affect the shape of polarization curves, the overpotential of electrode processes, and the cycling time. The presence of lithium polysulfides in electrolyte systems increases the cycling time of a lithium electrode and positively affects the quality of lithium cathodic deposits. A suggested reason for the positive effect of lithium polysulfides is the appearance of a surface film on metallic lithium: this film has quite high protective properties but does not inhibit electrochemical processes.     

柱状金属锂沉积物:电解液添加剂的影响

二次电池的能量密度已成为推动电动汽车和便携式电子产品技术向前发展的重要指标。使用石墨负极的锂离子电池正接近其理论能量密度的天花板,但仍难以满足高端储能设备的需求。金属锂负极因其极高的理论比容量和极低的电极电位,受到了广泛关注。然而,锂沉积过程中枝晶的生长会导致电池安全性差等问题。电解液对金属锂的沉积有着至关重要的影响。本文设计了一种独特的电解槽体系来进行柱状锂的沉积,研究了不同电解液体系(1mol·L^-1LiPF6-碳酸乙烯酯/碳酸二乙酯(EC/DEC,体积比为1:1)、1 mol·L^-1 LiPF6-氟代碳酸乙烯酯(FEC,体积分数5%)-EC/DEC (体积比为1:1))对金属锂沉积的影响。对两种电解液中金属锂沉积物长径比的研究表明,电解液的组分可以显著地影响金属锂的沉积形貌,在加入氟代碳酸乙烯酯(FEC)添加剂之后,柱状锂的直径从0.3–0.6μm增加到0.7–1.3μm,长径比从12.5下降到5.6。长径比的降低有助于减小金属锂和电解液的反应面积,提高金属锂负极的利用率和循环寿命。通过考察循环后锂片的表面化学性质,发现FEC的分解增加了锂表面固态电解质界面层中氟化锂(LiF)组分的比例,提高了界面层中锂离子的扩散速率,减少了锂的成核位点,从而给予锂核更大的生长空间,降低了沉积出的柱状锂的长径比。     

Reasons for the effect of the amount of electrolyte on the performance of lithium–sulfur cells

As is known, the depth of the electrochemical reduction of sulfur and lithium polysulfides, the reduction rate, and the cycle life of lithium–sulfur cells decrease with the electrolyte content. The present paper studies the reasons for the effect of the amount of electrolyte on the depth of sulfur reduction and the cycle life of lithium–sulfur cells. The main reason for the effect of the amount of electrolyte on the depth of the electrochemical reduction of sulfur was shown to be the generation of solvate complexes of lithium polysulfides. The minimum amount of electrolyte required for complete reduction of sulfur during the discharge of lithium–sulfur cells is determined by the composition of the generated solvate complexes of lithium polysulfides. The solvate numbers of the lithium ion in the solvate complexes of lithium polysulfides generted in sulfolane electrolyte systems were evaluated from the experimental data. An analysis of the results shows that the minimum solvate number of lithium ions in the solvate complexes of lithium polysulfides with sulfolane is 1.     

Interfacial Evolution of Lithium Dendrites and Their Solid Electrolyte Interphase Shells of Quasi‐Solid‐State Lithium‐Metal Batteries

Unstable electrode/solid‐state electrolyte interfaces and internal lithium dendrite penetration hamper the applications of solid‐state lithium‐metal batteries (SSLMBs), and the underlying mechanisms are not well understood. Herein, in situ optical microscopy provides insights into the lithium plating/stripping processes in a gel polymer electrolyte and reveals its dynamic evolution. Spherical lithium deposits evolve into moss‐like and branch‐shaped lithium dendrites with increasing current densities. Remarkably, the on‐site‐formed solid electrolyte interphase (SEI) shell on the lithium dendrite is distinctly captured after lithium stripping. Inducing an on‐site‐formed SEI shell with an enhanced modulus to wrap the lithium precipitation densely and uniformly can regulate dendrite‐free behaviors. An in‐depth understanding of lithium dendrite evolution and its functional SEI shell will aid in the optimization of SSLMBs.     

Lithiated dimethylaminomethyl ferrocenes and ruthenocenes

Dimethylaminomethylferrocenyl lithium and -ruthenocenyl lithium were generated using tin/lithium exchange reactions. The four different metallocenyl lithium compounds were analysed using NMR spectroscopy. The metallocenyl lithium reagents are useful reagents and have been shown to react with MeOD, ClSiMe₃ and DMF to give air-stable derivatives.     

二甲基亚砜在锂二次电池中的应用

采用二甲基亚砜(DMSO)作为锂二次电池的电解液, 研究了锂在DMSO中的沉积形貌和循环效率. 比较了六氟磷酸锂(LiPF₆)在DMSO、 碳酸丙烯酯(PC)和1,3-二氧环戊烷(DOL)3种溶剂中的沉积形貌和循环效率, 并研究了LiPF₆、 四氟硼酸锂(LiBF₄)、 高氯酸锂(LiClO₄)和二(三氟甲基磺酰)亚胺锂(LiTFSI)4种锂盐在DMSO中的沉积形貌和循环效率. 结果表明, 锂在DMSO中沉积得到的表面光滑平整且致密均匀, 循环效率在前10周要高于在PC中的, 溶剂DMSO有望用于金属锂二次电池中.     

The Detection of Two Lithium Species in the Blood Serum of Mental Patients

Abstract

Li FT-NMR was used for the detection of different lithium species in human serum. Two serum samples from mentally ill patients undergoing lithium treatment were studied. Both samples gave spectra with a major peak corresponding to aqueous lithium ion and a much smaller peak at ?0.3 ppm relative to the lithium ion peak. Two serum samples from normal persons were spiked with lithium but the resulting spectra showed only the lithium ion peak.     

电化学法提锂技术的研究进展及展望

随着新能源产业的不断发展,锂资源的需求量急剧增加。我国具有丰富盐湖锂资源,随着技术的革新与产业化的实践,盐湖提锂技术逐渐走向成熟。电化学法提锂作为众多提锂技术中的新秀,因绿色环保、选择性高、低能耗而备受国内外研究者的关注。本文对国内外电化学提锂技术的研究进展进行综述,并对未来电化学提锂技术的发展给出建议与展望。     

影响锂离子电池安全性的因素

锂离子电池的安全性一直是锂离子电池 ,特别是大型锂离子电池研制、生产、使用中的关键性问题 ,通过对锂离子电池的材料、制造工艺以及使用条件等方面的探讨 ,分析影响锂离子二次电池安全性的各种因素     

Correlation between the 6Li,15N coupling constant and the coordination number at lithium

The 6Li,15N coupling constants of lithium amide dimers and their mixed complexes with n-butyllithium, formed from five different chiral amines derived from (S)-[15N]phenylalanine, were determined in diethyl ether (Et2O), tetrahydrofuran (THF) and toluene. Results of NMR spectroscopy studies of these complexes show a clear difference in 6Li,15N coupling constants between di-, tri- and tetracoordinated lithium atoms. The lithium amide dimers with a chelating ether group exhibit 6Li,15N coupling constants of approximately 3.8 and approximately 5.5 Hz for the tetracoordinated and tricoordinated lithium atoms, respectively. The lithium amide dimers with a chelating thioether group show distinctly larger 6Li,15N coupling constants of approximately 4.4 Hz for the tetracoordinated lithium atoms, and the tricoordinated lithium atoms have smaller 6Li,15N coupling constants, approximately 4.9 Hz, than their ether analogues. In diethyl ether and tetrahydrofuran, mixed dimeric complexes between the lithium amides and n-butyllithium are formed. The tetracoordinated lithium atoms of these complexes have 6Li,15N coupling constants of approximately 4.0 Hz, and the 6Li,15N coupling constants of the tricoordinated lithium atoms differ somewhat, depending on whether the chelating group is an ether or a thioether; approximately 5.1 and approximately 4.6 Hz, respectively. In toluene, mixed trimeric complexes are formed from two lithium amide moieties and one n-butyllithium. In these trimers, two lithium atoms are tricoordinated with 6Li,15N coupling constants of approximately 4.6 Hz and one lithium is dicoordinated with 6Li,15N coupling constants of approximately 6.5 Hz.     

Interfacial Evolution of Lithium Dendrites and Their Solid Electrolyte Interphase Shells of Quasi-Solid-State Lithium-Metal Batteries

Unstable electrode/solid-state electrolyte interfaces and internal lithium dendrite penetration hamper the applications of solid-state lithium-metal batteries (SSLMBs), and the underlying mechanisms are not well understood. Herein, in situ optical microscopy provides insights into the lithium plating/stripping processes in a gel polymer electrolyte and reveals its dynamic evolution. Spherical lithium deposits evolve into moss-like and branch-shaped lithium dendrites with increasing current densities. Remarkably, the on-site-formed solid electrolyte interphase (SEI) shell on the lithium dendrite is distinctly captured after lithium stripping. Inducing an on-site-formed SEI shell with an enhanced modulus to wrap the lithium precipitation densely and uniformly can regulate dendrite-free behaviors. An in-depth understanding of lithium dendrite evolution and its functional SEI shell will aid in the optimization of SSLMBs.     

微量元素锂和人体健康

评述了锂的生理学及其无机毒物学和无机药理学方面的进展。其重点是锂用于狂郁精神病的治疗,锂的亚细膜功能及对新陈代谢过程的影响。     

SINGLE IONIC CONDUCTI0N OF POLYSILOXANE CONTAINING PROPYLENE CARBONATE GROUP AND LITHIUM POLYMERIC SALTS

The polysiloxane containing propylene carbonate side group and several lithium poly-meric salts were synthesized. The structure were confirmed by IR, NMR and XPS. Theblending systems of polysiloxane containing propylene carbonate group with different lithiumpolymeric salts were studied by ion conductivity XPS and DSC. Different lithium poly-meric salts in the blending system lead to conductivity arranged in the following sequence:poly(lithium ethylenebenzene sulfonate methylsiloxane)>poly(lithium propionate methyl-siloxane)>poly(lithium propylsulfonate methylsiloxane)>poly(lithium styrenesulfonate).In the blending system the best single ion conductivity was close to 10~(-5) Scm~(-1) at roomtemperature. XPS showed that at low lithium salt concentration the conductivity increasedwith the increasing content of lithium salt, in consequence of the increase of free ion andsolvent separated ion pair. At high lithium salt concentration the free ion was absent andthe solvent-separated ion pair functioned as carrier.     

Determination of water content of hygroscopic lithium salts

Determination of the water content in hygroscopic lithium chloride, lithium bromide, lithium nitrate and lithium sulfate by Karl Fischer reagent (KFR), Hydranal (Eugen Scholz reagent) and by thermal-vacuum drying is discussed. Agreement between the results of the KFR titrations and drying methods is satisfactory whereas the Hydranal titrations gave high values. Only the drying method was suitable for lithium sulfate.     

单离子导体聚合硼酸锂盐的研究进展

目前商业化锂离子电池常用的锂盐LiPF6,对水极其敏感,热稳定性差,尤其是在高温条件下的应用存在着一定的安全隐患.种类多且环境友好的新型有机硼酸锂盐越来越受到人们的重视.本文综述了近年来几种锂盐的合成方法,电化学性能,各自存在的优点和不足以及本课题组在聚合硼酸锂盐方向取得的系列研究进展,并对锂盐和聚合物电解质的发展方向进行了展望.     

Cation-exchange reaction with accompanying current discharge

When a cation-exchange membrane swollen with propylene carbonate was placed in tight contact with lithium foil, an ion-exchange reaction of lithium ions with the cation-exchange membrane occurred. The assembly exhibited properties of a lithium cell (3.0-3.2 V without load). The ion-exchange capacity of various cation-exchange membranes and their degree of swelling with propylene carbonte were related to the capacity of the formed lithium cell. A discharge current of 0.32 mA was observed through a 3 cm² cell. Analysis of lithium ions in the membrane phase after discharge revealed that the ion-exchange reaction of lithium ions with the cation-exchange groups of the membrane was directly related to the current discharge of the cell. However, the formed lithium cell showed high self-discharge.     

Electronic charge density and mean kinetic energy of lithium orbitals in LiH,LiH+, Li2, Li2+, LiH2+, and Li2H+

The electron density near the lithium nucleus in the species LiH, LiH⁺, Li₂, Li₂⁺, LiH₂⁺, and Li₂H⁺ was analyzed by transforming the SCF molecular orbitals into a sum of atomic contribnutions, for both core and valence orbitals. These “hybrid-atomic” orbitals were used to compare: electron densities, orbital polarizations, and orbital mean kinetic energies with the corresponding lithium atom quantities. Core-orbital electron densities at the lithium nucleus were observed to increase by up to 0.5% relative to the lithium atom 1s orbital. Lithium cores also exhibited polarization but, surprisingly, in the direction away from the internuclear region. Similar dramatic changes were seen in the electron densities of the valence orbitals of lithium: The electron density at the nucleus for these orbitals increased two-fold for homonuclear species and twenty-fold for heteronuclear triatomic species relative to the electron density at the nucleus in lithium atom. The polarization of the valence orbital electronic charge, in the vicinity of the lithium nucleus, was also away from the internuclear region. The mean “hybrid-atomic” orbital kinetic energies associated with the lithium atom in the molecules also showed changes relative to the free lithium atom. Such changes, accompanying bond formation, were relatively small for the lithium core orbitals (within 0.2% of the value for lithium atom). The orbital kinetic energies for the lithium valence electrons, however, increased considerably relative to the lithium atom: By a factor of about 2 in homonuclear diatomics, by a factor of 7 in heteronuclear diatomics, and by a factor of 11 in the triatomic species. In summary, the total electronic density (core plus valence) at the lithium nucleus remained remarkably constant for all of the species studied, regardless of the effective charge on lithium. Thus, the drastic changes noted in the individual lithium orbitals occurred in a cooperative fashion so as to preserve a constant total electron density in the vicinity of the lithium nucleus. In all cases, bond formation was accompanied by an increase in the orbital kinetic energy of the lithium valence orbital. We suggest that these two observations represent important and significant features of chemical bonding which have not previously been emphasized.     

氢化铝锂新合成方法的研究

在略高溫度下,通过氯化锂和金属钠在氫气氛中的反应,得到了氢化锂和氯化钠的混合物。用通常的Schlesinger法将得到的混合物用于合成氢化铝锂。反应的副产物是氯化锂和氯化钠的混合物,可用不同方法将其分离,所得氯化锂用于再循环。