Synthesis of 3-Acyl-1,2-benzisoxazoles

A convenient method for the synthesis of 3-acyl-1,2-benzisoxazoles, which are unstable toward bases, is described. Base-catalyzed cyclization of 2-alkyl- and aryl-1,3-dithian-2-yl o-chlorophenylketoximes 4a-1 gave 3-(2-alkyl- and aryl-1,3-dithian-2-yl)-1,2-benzisoxazoles 8a-1 , which were converted into the corresponding 3-acyl-1,2-benzisoxazoles 1a-1.     

Unexpected Products from Carbonylation of Lithiated Quinazolin-4(3H)-one Derivatives

Doubly lithiated 3-pivaloylaminoquinazolin-4(3H)-one reacts with carbon(II) oxide at 0°C to give 77% of a mixture of azetidinone and indole derivatives, each incorporating a diisopropylamide unit from lithium diisopropylamide used for lithiation. No analogous reaction occurs with doubly lithiated 3-acetylaminoquinazolin-4(3H)-one and 3-acyl-2-alkylquinazolin-4(3H)-one. Carbonylation of doubly lithiated 2-alkyl-3-aminoquinazolin-4(3H)-ones at 0°C results in deamination to give 2-alkylquinazolin-4(3H)-ones in good yields.     

Cyclothiomethylation of carboxylic acid hydrazides with aldehydes and H<Subscript>2</Subscript>S

The cyclothiomethylation of carboxylic acid hydrazides RCONHNH₂ (R = C₅H₄N, Ph, 2-MeOC₆H₄, or 4-HOC₆H₄CH₂) with formaldehyde and H₂S at 70 °C affords predominantly the corresponding N-(1,3,5-dithiazinan-5-yl)amides, whereas this reaction at 0–−50 °C gives a mixture of the latter compounds with 3-acyl-1,3,4-thiadiazolidines. N-(1,3,5-Dithiazinan-5-yl)-amides were selectively synthesized by the reaction of carboxylic acid hydrazides with formaldehyde and H₂S in the presence of BuONa in BuOH.     

Reaction of 2, 2′-dithiodianiline with 2-alkyl-1, 3-diketones. Synthesis and chemical behaviour of some 2-acyl-2h-1, 4-benzothiazines

The reactions of 2, 2′-dithiodianiline 1 with 2-alkyl-1, 3-diketones 2a-d have been employed in order to synthesize 2-acyl-2H-1, 4-benzothiazines. In the cases of 2a, b the expected 2-acyl-2H-1, 4-benzothiazines, i.e. 3a, b were obtained, whereas the reactions of 1 with the 1, 3-diketones 2c, d afforded the α-ketosulfide 12 and the 1, 4-benzothiazine 17 , respectively. The products 3a, b underwent the hydrolytic C₂-C₃ bond cleavage of the thiazine nucleus to give the α-ketosulfides 6 and 11 , respectively. Such an hydrolytic process explains the formation of the compound 12 in the reaction of 1 with 2c . The formation of 17 in the case of 2d is considered to be formed through a rearrangement involving the 1, 3-sulfur shift of the preformed 1, 4-benzothiazine 3d .     

1,5-Electrocyclization of 1-alkyl- 3-[(2Z)-2,4-diaryl-4-oxobut-2-en-1-yl]-1H-benzimidazol-3-ium bromides

Cyclization of 1-alkyl-3-[(2Z)-2,4-diaryl-4-oxobut-2-en-1-yl]-1H-benzimidazol-3-ium bromides occurs in the presence of MeONa at a reduced temperature of 5–10°C via a 1,5-electrocyclization mechanism to give 3a,4-dihydro-3H-pyrrolo[1,2-a]benzimidazoles. These are unstable under the reaction conditions and are readily converted to {1-[2-(alkylamino)phenyl]-4-phenyl-1H-pyrrol-3-yl}(phenyl)methanones.     

Synthetic and spectroscopic study of 5-amino-2-acyl-1,2,4-thiadiazolin-3-ones

5-Amino-2-acyl-1,2,4-thiadiazolin-3-ones 2–1 can be synthesized from 5-amino-2H-1,2,4-thiadiazolin-3-one ( 1–1 ) via a selective acylation with an acid anhydride in pyridine. The ¹H nmr spectral characteristics of 5-amino-2-acyl-1,2,4-thiadiazolin-3-ones 2–1 is in particular, compared with 5-amino-2H-1,2,4-thiadiazolin-3-one ( 1–1 ) and 5-amino-2-alkyl-1,2,4-thiadiazolin-3-ones 1–2, 1–3 . The 5-amino group of 2–1 appeared as two peaks in its ¹H nmr spectrum, which merged to a single peak at a higher temperature, while those of compound 1–1, 1–2 and 1–3 appear only as a single peak. The restricted rotation of the C(5)-N(5) (at amino) bond of 5-amino-2-acetyl-1,2,4-thiadiazolin-3-one (2a-1) is about 14.5 Kcal/mol.     

An Efficient Route for the Synthesis of 3-(4-Bromophenyl)-2-Phenyl-3,4-Dihydro-2H-Benzo[E][,32,]Oxazaphosphinine,its P-Chalcogenides and Metal Complexes

Abstract

2-[(4-bromophenylamino)-methyl]-phenol (1) gave substantially pure 3-(4-bromophenyl)-2-phenyl-3,4-dihydro-2H-benzo[e][1,3,2]- oxazaphosphinine (2) on cyclization with phenyldichlorophosphine in toluene at 0 °C. Reaction of 2 with H₂O₂ in dichloromethane gave selectively 3. P-chalcogenides (4 and 5) were prepared by reacting 2 with elemental S and Se powder in toluene, whereas the tungsten pentacarbonyl complex 6 was prepared by reacting 2 with [W(CO)₅(CH₃CN)] in tetrahydrofuran at 25 °C.

Supplementary materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfer, and Silicon and the Related Elements for the following free supplemental files: Additional figures.     

Preparation,Structure and Properties of the One-Dimensional Polymeric Complex Na2[AlW3O4(O2CEt)8]2

Abstract

The heterometallic polymeric cluster Na₂[AlW₃O₄ (O₂CEt)₈]₂ (1) has been prepared by reaction of W(CO)₆ and NaWO₄·2H₂O with AlCl₃ at 120°C in propionic anhydride and characterized by X-ray crystallography, with the following crystal data: triclinic, space group P1, a = 12.205(5), b = 13.032(4), c = 13.925(3) Å, α = 90.21(3)°, β = 109.53(5)°, γ = 117.26(6)°, V = 1822.8(1)ų, Z = 1, R = 0.038 and R_w = 0.101. The structure consists of two triangular [W₃O₄(O₂CEt)₈]^4? cluster unit, which act as polydenate ligands to link Al³⁺ and Na⁺ ions forming a one–dimensional chain structure. IR spectra show characteristic [W₃O₄]⁴⁺ bands at 746–815 cm^?1. Thermal analysis reveals that the complex is air stable up to 250°C. Cluster 1 decomposes in hot aqueous 2 M HCl solution to produce discrete [W₃O₄]⁴⁺ units.     

Interaction of adenine with dichloro-[1-alkyl-2-(naphthylazo)-imidazole]palladium(II) complexes: kinetic and mechanistic studies

Interaction of adenine (A) with dichloro-[1-alkyl-2-(α-naphthylazo)imidazole] palladium(II) [Pd(α-NaiR)Cl₂], 1 and dichloro-[1-alkyl-2-(β-naphthylazo)imidazole] palladium(II) [Pd(β-NaiR)Cl₂], 2 {where R=Me (a), Et (b) or Bz (c)} in MeCN-water (50% v/v) medium to yield [{1-alkyl-2-(α-naphthylazo)imidazole}(adenine)]palladium(II) perchlorates (3a, 3b, 3c) and [{1-alkyl-2-(β-naphthylazo)imidazole}(adenine)]palladium(II) perchlorates (4a, 4b, 4c) was studied. The products were characterized by physico-chemical and spectroscopic methods. The reaction kinetics were second order overall, being first order in both the Pd(II) complex and adenine. The effect of adding chloride was consistent with rate-limiting dissociation of chloride from the complex. Thermodynamic parameters were determined from temperature variation experiments. The second-order rate constant k ₂ corroborates with the experimental Δ^‡H° values, while the negative values of Δ^‡S° indicate that the reaction proceeds through an associative inner sphere mechanism.     

Chemo- and Regioselective 1,3-Dipolar Cycloaddition of 2-Diazopropane over 1,4-Benzoquinone: Synthesis of New Pyrazoloquinones

Abstract

1,3-Dipolar cycloaddition reaction of 2-diazopropane 1 with 1,4-benzoquinone 2 carried out at ?20 °C led to a minor mono-cycloadduct 4 and mixture of bis-cycloadducts 6 and 7. The same addition realized with 3H-pyrazole 7 at ?60 °C for 2 h yields a mixture of compounds 8 and 9 and results in O-alkylation. The reaction of 3H-pyrazoles 4 and 7 with dimethylsulfoxide and oxalyl chloride under Swern conditions led to pyrazolenines 11 and 12.     

Novel synthesis of N-alkyl-3,4-disubstituted pyrrolidine-2,5-diones: Condensation of α-oxoketene O,N-acetals and maleic anhydride

A novel method for the synthesis of N-alkyl-3-acyl-4-alkoxycarbonylmethylpyrrolidine-2,5-diones (3) was accomplished. α-Oxoketene O,N-acetals (1) reacted with maleic anhydride (2) at 80–110 °C for 5 h without solvent to give 3 in moderate to good yield (36–74%). Single X-ray crystallographic analysis showed that the two substituents on C-3 and C-4 were trans.     

Use of Tetrahydro-2H-1,3-Oxazinones as Aminopropylation Agents

Treatment of tetrahydro-2H-1,3-oxazin-2-one (1) or the 3-methyl derivative 2 with aniline salts or thiophenols at 180 °C affords the corresponding N-aryl-1,3-propanediamines 3 or 3-(arylthio)propanamines 4 in good yields.     

Synthesis of 1,2-bis[2-methyl-5(3,4-difluorophenyl)-3-thienyl] perfluorocyclopentene

2-Methylthiophene (1) was treated at 0°C with liquid bromine to form 3,5-dibromo-2-methylthiophene (2) which reacted with tributyl borate to give 2-methyl-3-bromo-5-boronate thiophene (3) at −78°C. Treatment of 3 with 3,4-difluorobrombenzene gave 2-methyl-3-bromo-5-(3,4-difluorophenyl)thiophene (4). Finally, a novel photochromic dithienylethene compound, 1,2-bis [2-methyl-5(3,4-difluorophenyl)-3-thienyl]perfluorocyclopentene (DT-1), was synthesized by the reaction of 4 with perfluorocyclopentene at −78°C. The compound (DT-1) was characterized by IR, NMR, MS, elemental analysis and its photochromic behavior was also discussed. __________ Translated from Chinese Journal of Organic Chemistry, 2007, 27(10): 1282–1284 [译自: 有机化学]     

Synthesis and Structural Characterization of a Novel Indium Mercapto Derivative [ClIn(SCH2(CO)O)2]2-[(4-MepyH)2]2+

The synthesis and structural characterization of a novel In(III) complex is described. The reaction between InCl₃ with sodium mercapto-acetic acid (NaSCH₂(CO)OH) in 4-methylpyridine (CH₃(C₅H₅N), (4-Mepy)) at 25°C affords [ClIn(SCH₂(CO)O)₂]^2-[(4-MepyH)₂]²⁺ (1). X-ray diffraction studies of (1) show it to have a distorted square-pyramidal geometry with the [(^-SCH₂(CO)CO^-)] ligands in a trans conformation. The compound crystallizes in the P1(No. 2) space group with a = 7.8624(6) Å, b = 9.950(1) Å, c = 13.793(2) Å, α = 107.60(1)°, β = 90.336(8)°, γ = 98.983(9)°, V = 1014.3(4) ų, R(F°) = 0.037 and R_w = 0.048.     

Organic-salt-mediated highly regioselective N3-alkylation of 2-thiophenytoin via Michael reaction under solvent-free conditions

A regioselective N3-alkylation of 5,5-diphenyl-2-thiohydantoin (2-thiophenytoin) using a very efficient mild base K₂CO₃ and α,β-unsaturated esters in the presence of organic salt TBAB (tetrabutylammonium bromide) at room temperature has been reported (3b–3h). The selectivity of this reaction is excellent and products have been produced in good yields under solvent-free conditions. The increase of the reaction temperature to 70°C mostly disappeared this selectivity and afforded only the N1,N3-dialkylated derivatives of 2-thiophenytoin in good yields (4b–4g). We were unable to selectively N3-alkylate 2-thiophenytoin with ethyl acrylate at both room temperature and 70°C under the same conditions (4a). Dimethyl and diethyl fumarates cannot work as Michael acceptors and were hydrolyzed to fumaric acid under reaction conditions.     

DERIVATIVES OF 4-CHLORO-3,5-DINITROBENZOTRIFLUORIDE V. SYNTHESIS OF 4,6-DINITRO-2,8-BIS(TRIFLUOROMETHYL) PHENOTHIAZINE (1), ISOPROPYL 2,6-DINITRO-4-TRIFLUOROMETHYLPHENYL SULFIDE (2) AND BIS(2,6-DINITRO-4-TRIFLUOROMETHYLPHENYL) DISULFIDE (3)

Abstract

The reaction of potassium isopropyl dithiocarbonate with 4-chloro-3,5-dinitrobenzotrifluoride in dimethylformamide at 25–30°C afforded the titled phenothiazine (1) and sulfide (2). The reaction of bis(2,6-dinitro-4-trifluoromethylphenyl)-sulfide or the above halogen compound with sodium hydrosulfide in the same solvent at 80–90°C furnished 1. At 25–30°C the latter reaction afforded the titled disulfide (3). Possible mechanisms and supporting nmr, ir and mass spectral data are discussed.     

Bridging chlorides and hydroxides: syntheses and crystal structures of binuclear and tetranuclear NiII complexes derived from a reduced Schiff-base ligand 2-(2-pyridylmethylamino)ethanesulfonic acid

Two complexes, [Ni(pmt)(Cl)] (1) and [Ni₄(pmt)₄(OH)₄]·8H₂O (2) [Hpmt = 2-(2-pyridylmethylamino)ethanesulfonic acid], were synthesized by different experimental methods in methanol-water mixed solution. Compound 1 crystallizes in triclinic, space group P?1 with unit cell parameters: a = 8.315(2) Å, b = 8.383(2) Å, c = 9.128(2) Å, α = 103.654(2)°, β = 98.125(2)°, γ = 113.154(2)°, V = 548.6(2) ų, Z = 2. A pair of chlorides is μ ₂-bridges linking two Ni^II atoms in forming binuclear complex 1. The coordination environment at Ni^II is distorted square-pyramidal geometry. Compound (2) belongs to monoclinic, space group C2/c, with a = 16.5168(15) Å, b = 18.3718(17) Å, c = 17.5473(16) Å, α = γ = 90°, β = 93.3820(10)°, V = 5315.3(8) ų, Z = 4. Four hydroxides are μ ₃-bridges joining four Ni^II atoms to generate a cubic framework as a tetranuclear complex. The configuration at each Ni^II is distorted octahedral. Both π–π stacking of pyridine rings and intermolecular hydrogen bonds stabilize the solid state structures for 1 and 2.     

A facile and efficient method for synthesis of xanthone derivatives catalyzed by HBF4/SiO2 under solvent-free conditions

Abstract  

HBF₄/SiO₂ was used as an efficient, green, and inexpensive catalytic system for synthesis of 12-aryl or 12-alkyl-8,9,10,12-tetrahydro-11H-benzo[a]xanthen-11-one derivatives via a one-pot three-component reaction of aldehydes, 2-naphthol, and cyclic 1,3-dicarbonyl compounds. The reactions proceeded rapidly at 80 °C under solvent-free conditions and the desired products were obtained in good to excellent yields.     

Synthesis and properties of mesogenic laterally fluorinated compounds containing benzoxazole unit

Series of mesogenic laterally fluorinated compounds, 2-(2′,3′-difluoro-4′-alkoxybiphenyl-4-yl)-benzoxazole derivatives (nB-Fx) bearing different substituents (H, CH₃, Cl, NO₂, coded as nB-FH, nB-FM, nB-FC and nB-FN, respectively) at 5-position, were prepared and characterised. Their phase transition behaviour was investigated by differential scanning calorimetry and polarising optical microscopy. nB-Fx with alkoxy chain lengths of 2 to 10 carbons exhibited enantiotropic mesophases, for which the mesophase ranges were 0°C–58°C and 0°C–71°C on heating and cooling for nB-FH, 41°C–93°C and 66°C–140°C for nB-FM, 44°C–133°C and 87°C–155°C for nB-FC, and 0°C–76°C and 0°C–95°C for nB-FN, respectively. Compared to non-fluorinated analogues, with the exception of nB-FC, fluorinated nB-Fx mainly exhibited nematic mesophase both in heating and cooling, which were attributed to the disruption of the side-to-side intermolecular packing caused by the two ortho-lateral fluoro substituents. For nB-Fx series, nB-FM, nB-FC and nB-FN exhibited a much wider mesophase range than the corresponding nB-FH series, which indicated that the substituent at benzoxazole moiety was helpful in increasing the mesophase stability. With the exception of nB-FN, the nB-Fx series displayed intense photoluminescence emission at 379–383 nm in methylene chloride solution, when it was excited at its absorption maxima.     

SYNTHESIS AND STRUCTURAL CHARACTERIZATION OF TRIS(DIMETHYLDITHIOCARBAMATE) INDIUM(III), In[S2CN(CH3)2]3

Abstract

The synthesis and structure of the indium dithiocarbamate, In[S₂CN(CH₃)₂]₃·(1/2) 4-mepy (4-mepy=4-methylpyridine), is described. Indium metal was oxidized by tetramethylthiuram disulfide in 4-methylpyridine at 25°C to form a new, homoleptic indium(III) dithiocarbamate in yields exceeding 60%. In[S₂CN(CH₃)₂]₃ exists as a discrete molecule with a distorted-octahedral geometry. The compound crystallizes in the P 1 (No. 2) space group with a=9.282(1)Å, b=10.081(1)Å, c=12.502Å, α=73.91(1)°, β=70.21(1)°, γ=85.84(1)°, Z=2, V(Å)=1057.3(3), R=0.046 and R_w =0.061.