A Convenient Deoxygenation of Sulfoxides with CO(II) and NaBH4

Complex species, presumably transition metal hydrides, prepared from NaBH₄ and transition metal salts have been used in the reduction of nitro, cyano, halo and amido functional groups.¹ We recently reported that Co (II) and NaBH₄ in ethanol reduced alkenes and alkynes in high yields, and that the regent displayed remarkable steric selectivity in the reduction of alkenes: mono>di>tri- and tetra-substituted alkenes.² We now report that the same reagent could be conveniently employed for the efficient reduction of sulfoxides to sulfides. A number of conditions have previously been reported to deoxygenate sulfoxides to sulfides in varying yields: for example, SO⁹ ₃, etc.     

Imination of Sulfides and Sulfoxides with Sulfonylimino‐λ3‐Bromane under Mild,Metal‐Free Conditions

Exposure of sulfides and sulfoxides to trifluoromethanesulfonylimino(aryl)‐λ³‐bromane in dichloromethane at 0 °C results in a facile transfer of the sulfonylimino group to sulfur atoms and affords N‐triflylsulfilimines and ‐sulfoximines in high yields under transition‐metal‐free conditions. Imination of (R)‐methyl p‐tolyl sulfoxide proceeded with predominant retention of configuration at the stereogenic sulfur center. The Hammett plot afforded ρ values of ?0.58 for para‐substituted thioanisoles and ?0.49 for their equivalent sulfoxides, which suggests a buildup of positive charge on the sulfur atoms of sulfides and sulfoxides in the transition state. Calculations suggest a bimolecular nucleophilic‐substitution mechanism on the negatively charged nitrogen atom of the sulfonylimino‐λ³‐bromane, which involves the attack of a sulfide from the opposite side to bromine(III).     

Cross-metathesis reaction of vinyl sulfones and sulfoxides

Cross-metathesis reactions of α,β-unsaturated sulfones and sulfoxides in the presence of molybdenum and ruthenium pre-catalysts were tested. A selective metahesis reaction was achieved between functionalized terminal olefins and vinyl sulfones by using the ‘second generation’ ruthenium catalysts 1c-h while the highly active Schrock catalyst 1b was found to be functional group incompatible with vinyl sulfones. The cross-metathesis products were isolated in good yields with an excellent (E)-selectivity. Both the molybdenum and ruthenium-based complexes were, however, incompatible with α,β- and β,γ-unsaturated sulfoxides.     

Interaction of Molybdenum(VI) Oxyanions with +2 Metal Cations

The association of molybdenum(VI) oxyanions with metal cations was investigated in solutions of low ionic strength, such as those prevailing in most natural waters. Potentiometric titrations were carried out for the systems containing molybdenum(VI) anions and divalent metal cations (M = Mg, Ca, Sr, Ba, Mn, Fe, Co, Ni, Cu, Zn, Cd, Hg and Pb). This selection includes the major cations and some other cations of high environmental relevance. The interaction of iron(III) with Mo(VI) anions was also studied. At neutral and basic pH values and for those systems where the solubility of the molybdate salt is high enough, ionic species pairs such as [M(MoO₄)] predominate. At acidic pH values, [M(HMoO₄)]⁺ and [M(Mo₇O₂₄)]^4– are formed, the latter species are only relevant for total molybdenum concentrations higher than 1 mmol·L^?1. These results provide the basis for molybdenum speciation in natural aquatic systems, on which the environmental fate, bioavailability and toxicity of the element depend.     

Formation of diaryl sulfides and sulfoxides: Synthesis,characterization and structure activity correlation studies

Abstract

The synthesis of a series of stable diarylsulfides and sulfoxides is reported. All the newly synthesized compounds were characterized by ¹H, ¹³C NMR and mass spectroscopic techniques. A detailed mechanistic study indicates that the formation of sulfoxides follows the oxidation. In addition to synthesis, characterization and mechanistic studies, the glutathione peroxidase(GPx) mimetic activity of the newly synthesized compounds is described. It is observed that the diaryl sulfides having a heterocyclic ring attached to the nitrogen atom facilitates the oxidation of the sulfur center to form the corresponding sulfoxides. The substituents attached to the nitrogen atom play an important role in the catalytic activity of the substituted diaryl sulfides. The obtained data supports for the higher antioxidant activity of diaryl sulfides than that of the corresponding sulfoxides.     

Chiral sulfoxides from (R)-α- dimethylaminoethylferrocene

Chiral sulfoxides and sulfones of potential interest in organic synthesis are prepared by the reaction of 2-lithio-1-(dimethylaminoethyl)-ferrocene with disulfides, followed by oxidation of the sulfides thus obtained with sodium metaperiodate on alumina or with 3-chloropcrbenzoic acid. Most of the reactions, in particular oxidations of the sulfides to form the sulfoxides, proceed with high diastereoselectivity. The sulfoxides and sulfones can be isolated as pure enantiomers. Assignment of absolute configurations is based on independent synthesis together with ¹H- and ¹³C-NMR data and ORD measurements.     

Transfer of Electrophilic NH Using Convenient Sources of Ammonia: Direct Synthesis of NH Sulfoximines from Sulfoxides

A new system for NH transfer is developed for the preparation of sulfoximines, which are emerging as valuable motifs for drug discovery. The protocol employs readily available sources of nitrogen without the requirement for either preactivation or for metal catalysts. Mixing ammonium salts with diacetoxyiodobenzene directly converts sulfoxides into sulfoximines. This report describes the first example of using of ammonia sources with diacetoxyiodobenzene to generate an electrophilic nitrogen center. Control and mechanistic studies suggest a short‐lived electrophilic intermediate, which is likely to be PhINH or PhIN⁺.     

Synthesis and hydrophosphorylation of π-complexes of dibenzylideneacetone and cyclic conjugated dienones with homocarbonyl and carbonylcyclopentadienyl molybdenum compounds

Reactions of dibenzylideneacetone and cyclic cross-conjugated dienones with hexacarbonylmolybdenum(0) and bis[tricarbonyl(cyclopentadienyl)molybdenum(0)] afforded the corresponding complexes with η²-(C=C),η²-(C=O) coordination of the diketone to metal center, regardless of the ligand structure and initial molybdenum compound. The reactivity of the multidentate ligands may change as a result of coordination.     

The determination of molybdenum in geological samples by Neutron Activation Analysis

A metal-silicate extraction technique combined with neutron activation analysis has been developed to determine molybdenum in geological samples. The samples are equilibrated with Femetal powder at high temperatures. Molybdenum is completely extracted into the metal phase because of very reducing conditions in the furnace. The metal spherule is separated from the silicates, irradiated and dissolved in an acid solution. The molybdenum is precipitated as a sulfide and the precipitate is dissolved in aqua regia and counted on a Ge/Li/detector. The radiochemical yield is obtained by irradiation of the solution. The method avoids production of⁹⁹Mo from induced fission of²³⁵U by performing the metal-silicate separation before irradiation. The precipitation step may be necessary to remove the high background from the decay of⁵⁹Fe. Mo concentrations down to 15 ng/g have been obtained using this method.     

Selective aerobic oxidation of sulfides to sulfoxides catalyzed by coenzyme NAD models

Coenzyme NAD⁺ models can be applied in the photooxygenation of sulfides to sulfoxides as organocatalysts at room temperature. A series of sulfoxides are synthesized easily with this protocol and the possible mechanism is discussed. This procedure provides a reliable approach to the clean production of useful sulfoxides in synthetic chemistry.     

Microwave plasma torch mass spectrometry for the direct detection of copper and molybdenum ions in aqueous liquids

Microwave plasma torch (MPT) is a simple and low power‐consumption ambient ion source. And the MPT Mass spectra of many metal elements usually exhibit some novel features different from their inductively coupled plasma (ICP) mass spectra, which may be helpful for metal element analysis. Here, we presented the results about the MPT mass spectra of copper and molybdenum elements by a linear ion trap mass spectrometer (LTQ). The generated copper or molybdenum contained ions in plasma were characterized further in collision‐induced dissociated (CID) experiments. These researches built a novel, direct and sensitive method for the direct analysis of trace levels of copper and molybdenum in aqueous liquids. Quantitative results showed that the limit of detection (LOD) by using MS² procedure was estimated to be 0.265 µg/l (ppb) for copper and 0.497 µg/l for molybdenum. The linear dynamics ranges cover at least 2 orders of magnitude and the analysis of a single aqueous sample can be completed in 5–6 min with a reasonable semi‐quantitative sense. Two practical aqueous samples, milk and urine, were also analyzed qualitatively with reasonable recovery rates and RSD. These experimental data demonstrated that the MPT MS is able to turn into a promising and hopeful tool in field analysis of copper and molybdenum ions in water and some aqueous media, and can be applied in many fields, such as environmental controlling, hydrogeology, and water quality inspection. Moreover, MPT MS could also be used as the supplement of ICP‐MS for the rapid and in‐situ analysis of metal ions. Copyright © 2016 John Wiley & Sons, Ltd.     

Some Comments on the Conformations of Methyl Phenyl Sulfides,Sulfoxides and Sulfones

¹³C-NMR. and He (Iα) photoelectron spectra of alkyl phenyl sulfides, sulfoxides and sulfones have been used to probe how their conformations depend on the size of the alkyl groups R. The results are interpreted to indicate that in the sulfides the S, R-bond is twisted out of the planar conformation with increasing size of the alkyl group, whereas in the sulfoxides and sulfones the preferred conformation with the S, R-bond perpendicular to the phenyl group plane seems to be independent of the size of R. These conclusions are in agreement with previous work on the alkyl phenyl sulfides and provide strong support for previous conjectures concerning the preferred conformations of alkyl phenyl sulfoxides and sulfones.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of [Mo(CO)2(η2‐S2COEt)(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η2‐S2CNC4H8)(η2‐SCNMe2)(PPh3)]

The reaction of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , with EtOCS2K and C4H8NCS2NH4 in dichloromethane at room temperature yielded the seven coordinated ethyldithiocarbonate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂COEt)(η²‐SCNMe₂)(PPh₃)] 2 , and the dithiocarbamate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂CNC₄H₈)(η²‐SCNMe₂)(PPh₃)] 3 . The geometry around the metal atom of compounds 2 and 3 are capped octahedrons as revealed by X‐ray diffraction analyses. The thiocarbamoyl and ethyldithiocarbonate or pyrrolidinyldithiocarbamate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, respectively. Structure parameters, NMR, IR and Mass spectra are in agreement with the crystal chemistry of the two compounds.     

A Convenient Procedure for the Reduction of Sulfones to Sulfoxides

Although there have been a relatively large number of publications recently dealing with the reduction of sulfoxides fo sulfides^1,2 there are still very few general procedures for the reduction of sulfones to sulfides and none at all, as far as we are aware, for the reduction of sulfones to sulfoxides. In his paper dealing with the use of diisobutylaluminum hydride (DIBAL-H) for the reduction of sulfones to sulfides, for example, Gardner³ points out the inadequacies of the more readily available lithium aluminum hydride for this reduction. We have developed a two part procedure for reducing sulfones 1 to sulfoxides 2 which fills an important gap in the functional group interconversion of organosulfur compounds, the results of which we now describe.     

Polarographic determination of molybdenum after extraction of its N-benzoyl-N-phenylhydroxylamine complex

Summary A sensitive and specific method for the DC-polarographic determination of molybdenum has been described. The molybdenum complex of N-benzoyl-N-phenylhydroxylamine can be extracted into chloroform and subjected to polarography after mixing with aqueous perchloric acid and methanolic lithium chloride. Effects of different acids, solvents and supporting electrolytes on the system have been studied. The current increases linearly from 5×10^–6 to 1×10^–4 M molybdenum and the metal can be determined in presence of almost all the other metal ions and a number of complexing agents. Application of the method is made to the determination of small amounts of molybdenum in steel.

---

Polarographische Bestimmung von Molybdän nach Extraktion seines N-Benzoyl-N-phenylhydroxylamin-Komplexes

Zusammenfassung Eine spezifische und empfindliche Methode zur gleichstrompolarographischen Bestimmung von Molybdän wird beschrieben. Der Molybdänkomplex von N-Benzoyl-N-phenylhydroxylamin wird in Chloroform extrahiert. Nach Zugabe wäßriger Perchlorsäure und methanolischer Lithiumchloridlösung kann man eine gut definierte polarographische Stufe erhalten. Der Einfluß verschiedener Säuren, Lösungsmittel und Leitsalze wurde untersucht. Der Grenzstrom nimmt von 5×10^–6 bis 1×10^–4 M Molybdän linear zu. Diese Methode eignet sich zur Bestimmung von Molybdän in Gegenwart von fast allen Metallen und einigen Komplexierungsmitteln. Ein Beispiel für die Bestimmung kleiner Mengen Molybdän in Stahl wird angeführt.

     

Electron transfer reactions of iron(III)-polypyridyl complexes with organic sulfoxides

The redox reactions of four iron(III)-polypyridyl complexes with six aryl methyl sulfoxides have been investigated by spectrophotometric technique. The reaction follows clean second order kinetics and proceeds through rate determining electron transfer (ET) from organic sulfoxides to iron(III). The Marcus cross-reaction relation has been applied to obtain the self exchange rate constant for the ArSOR/ArS⁺(O)R couple as 1.3×10⁷ M⁻¹ s⁻¹. The application of Marcus theory to this ET reaction shows that the contribution of inner sphere reorganization energy is 0.4 eV. The rate constant and reaction constant values observed with organic sulfoxides are small compared with organic sulfides towards the same oxidant Fe(NN)₃³⁺.     

Extraction of rhodium(III) with sulfoxides from hydrochloric acid solutions

Extraction of rhodium(III) from hydrochloric acid solutions with dihexyl sulfoxide (DHSO) and with petroleum sulfoxides (PSOs) was studied, and the optimal conditions for its recovery were found. At a phase contact time of up to 0.5 h, the extraction of rhodium(III) with sulfoxides occurred mainly by an ionassociation scenario. If the phase contact time exceeds 0.5 h, a mixed extraction scenario predominated to form the extracted complexes (L · H⁺) · [RhCl₄L₂]-(DHSO)_o and PSO (LH⁺) · [RhCl₄(H₂O) · L]⁻. The protonation of the extraction agents occurred at the donor oxygen atoms of the sulfoxide group. When rhodium was extracted with PSOs, the coordination of the extractant molecule in the inner coordination sphere of the acido complex to the metal ion occurred through the donor sulfur atom of the sulfoxide group, while with the use of DHSO, through the donor atoms of sulfur and oxygen of the sulfoxide group. Electronic, ¹H NMR, and IR spectroscopy and elemental analysis were used to determine the composition of the extracted compounds and suggest their structure.     

Use of quercetin in an improved method for molybdenum determination in waste water,silicate rocks and diverse alloys

A simple and highly sensitive spectrophotometric method for molybdenum (VI) determination has been developed. The method is based on solubilizing the binary molybdenum-quercetin complex and sensitizing the color reaction with cetyltrimethylammonium bromide (CTAB). The optimal conditions for the quantitative determination of molybdenum are studied. In KCl-HCl buffered medium of pH 2.3, the molar absorptivity of the 122 (Moquercetin-CTAB) ternary complex is 2.03 × 10⁵ 1 · mol^–1 · cm^–1 at 420 nm. The system obeys Beer's law up to 0.30 g/ml of molybdenum and the sensitivity index is 0.47 ng · cm^–2. The method is free of interference of most of the common metal ions and anions. The developed procedure has been successfully applied to molybdenum determination in waste water, silicate rocks and diverse alloys.     

一种用于光催化氧化硫醚成亚砜的超薄卟啉的共价有机骨架纳米片

单线态氧(~1O_2)可将硫醚化合物选择性氧化为亚砜,而开发具有高~1O_2量子产率的高效光敏剂至关重要。本文中我们报道了超薄二维共价有机骨架(COFs)纳米片(NSs)COF-367 NSs的制备和表征。COF-367 NSs在各种有机溶剂中的良好分散性和高效率的光收集赋予其在可见光照射下产生~1O_2的显著性能,且远优于块体COF-367。我们还证明了COF-367 NSs是硫醚化合物光催化氧化成亚砜的优良非均相催化剂,具有高效率和选择性以及良好的循环稳定性。     

The study of conditions for the preparation and application of99Mo−99mTc generators starting from irradiated molybdenum metal

⁹⁹Mo−^99mTc generators were prepared starting from irradiated molybdenum metal instead of MoO₃ in order to use reactor irradiation space more economically. The adsorption of molybdenum as sodium molybdate on different kinds of alumina was investigated. The effect of the pH of the column and the aqueous phase concentration of molybdenum were studied and related to the elution yield of^99mTc. A study of the radiation damage effect indicated that generators having a high elution efficiency of 90% could be prepared in the 100–600 mCi range. The losses of⁹⁹Mo were minimized to 10⁻⁵-10⁻⁴% and those of alumina to 2–5 μg/ml eluate.