Darstellung und Eigenschaften von Chromtricarbonyl-Komplexen strukturisomerer Borazin-Derivate

The new hexaalkylborazine chromium tricarbonyls (n-Pr)₃B₃N₃Me₃Cr(CO)₃ (V), Me₃B₃N₃(n-Pr)₃Cr(CO)₃ (VI), (i-Pr)₃B₃N₃Me₃Cr(CO)₃ (VII) and Me₃B₃N₃(i-Pr)₃Cr(CO)₃ (VIII) have been prepared from fac-Cr(CO)₃(MeCN)₃ and the corresponding borazine in dioxane or without solvent. They are much more labile than the isomeric complex Et₃B₃N₃Et₃Cr(CO)₃ (IV) which can be readily obtained from Et₃B₃N₃Me₃Cr(CO)₃ and Et₃B₃N₃Et₃ by ring ligand exchange. The NMR., IR., UV. and Mass spectroscopic data of the complexes IV–VIII will be briefly discussed. The preparation of the borazine derivatives (n-Pr)₃B₃N₃Me₃ (IX) and Me₃B₃N₃(n-Pr)₃ (X) is also reported.     

The synthesis and structure of triphenylsiloxycyclotriphosphazenes

The triphenylsiloxy-substituted cyclotriphosphazenes, N₃P₃Cl₅OSiPh₃, gem-N₃P₃Cl₄(OSiPh₃)₂, N₃P₃(OSiPh₃)₆, and N₃P₃(OPh)₅OSiPh₃, have been prepared. The synthesis of gem-N₃P₃Cl₄(OSiPh₃)₂ involves the reaction of (NPCl₂)₃ with Ph₃SiONa to form the intermediates gem-N₃P₃Cl₄(OSiPh₃)₂(ONa) and gem-N₃P₃Cl₄(ONa)₂, which yield gem-N₃P₃Cl₄(OSiPh₃)₂ when treated with Ph₃SiCl. The compounds N₃P₃Cl₅OSiPh₃ and N₃P₃(OSiPh₃)₀ are formed by the condensation reactions of N₃P₃Cl₅OBuⁿ and N₃P₃(OBuⁿ)₆, respectively, with Ph₃SiCl. The compound N₃P₃(OPh)₅OSiPh₃ is synthesized by the reaction between N₃P₃(OPh)₅Cl and Et₃SiONa to first give the intermediate N₃P₃(OPh)₅ONa, which yields N₃P₃(OPh)₅OSiPh₃ when reacted with Ph₃SiCl. The structural characterization and properties of these compounds are discussed. The crystal and molecular structure of gem-N₃P₃Cl₄(OSiPh₃)₂ has been investigated by single-crystal X-ray diffraction techniques. The crystals are monoclinic with the space group P2₁/c with a = 16.850(8), b = 12.829(4), c = 18.505(15) Å, and β = 101.00(6)° with V = 3927 ų and Z = 4. © 1996 John Wiley & Sons, Inc.     

On precipitation effects of aluminum,lanthanum, iron (III), and thorium phosphates

Summary Typical precipitation curves of various metal phosphates have been obtained using the turbidimetric technique. The following systems have been investigated: Al(NO₃)₃-K₃PO₄, Al(NO₃)₃-KH₂PO₄, Al(NO₃)₃NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃-(NH₄)₂HPO₄, FeCl₃K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃-NaH₂PO₄, La(NO₃)₃K₃PO₄,La(NO₃)₃-K₂HPO₄,La(NO₃)₃-KH₂PO₄,La(NO₃)₃NaH₂PO₄ and Th(NO₃)₄-K₂HPO₄. Typical precipitation curves indicated concentration ranges of phosphate precipitation and of complex solubility.

---

Zusammenfassung Typische F?llungskurven verschiedener Metallphosphate, die mittels Trübungsmessungen erhalten wurden, wurden graphisch dargestellt. Die folgenden Systeme wurden untersucht: Al(NO₃)₃-K₃PO₄,Al(NO₃)₃KH₂PO₄, Al(NO₃)₃-NaH₂PO₄, FeCl₃-K₃PO₄, FeCl₃(NH₄)₂HPO₄, FeCl₃-K₂HPO₄, FeCl₃-KH₂PO₄, FeCl₃NaH₂PO₄, La(NO₃)₃-K₃PO₄, La(NO₃)₃-K₂HPO₄, La(NO₃)₃-KH₂PO₄, La(NO₃)₃-NaH₂PO₄ und Th(NO₃)₄K₂HPO₄. Typische F?llungskurven zeigten Konzentrationsgebiete, in welchen die Metallphosphate gef?llt werden, sowie Konzentrationen, die zur Komplexbildung führten.

---

---

Supported in part by the U.S. Army Research Office, Contract No. DA-ORD-10.     

Vanadium (III), oxovanadium (IV) and oxovanadium (V) trifluoro-methanesulfonates

V(SO₃CF₃)₃, VO(SO₃CF₃)₂ and VO(SO₃CF₃)₃ have been prepared by reacting V(O₂CCF₃)₃, VO(O₂CCF₃)₂ and VOC1₃ with HSO₃CF₃. The i.r. data suggest a bridging bidentate nature for SO₃CF₃ groups. The diffuse reflectance spectrum of V(SO₃CF₃)₃ suggests hexacoordination of vanadium, whilst that of VO(SO₃CF₃)₂ is comparable to either five or six coordinated oxovanadium (IV) systems. The magnetic moments of V(SO₃CF₃)₃ and VO(SO₃CF₃)₂ are slightly lower than the spin-only values. Thermal decomposition of these triflates is simple. All the three triflates form coordination complexes with pyridine, 2, 2′-bipyridyl and triphenylphosphine oxide.     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

Synthese und Eigenschaften teilsilylierter Tri- und Tetraphosphane. Reaktionen lithiierter Diphosphane mit Chlorphosphanen

Synthesis and Properties of Partially Silylated Tri- and Tetraphosphanes. Reaction of Lithiated Diphosphanes with Chlorophosphanes The reactions of Li(Me₃Si)P? P(SiMe₃)(CMe₃) 1 , Li(Me₃Si)P? P(CMe₃)₂ 2 , and Li(Me₃C)P? P(SiMe₃)(CMe₃) 3 with the chlorophosphanes P(SiMe₃)(CMe₃)Cl, P(CMe₃)₂Cl, or P(CMe₃)Cl₂ generate the triphosphanes [(Me₃C)(Me₃Si)P]₂P(SiMe₃) 4 , (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)₂ 6 , [(Me₃C)₂P]₂P(SiMe₃) 7 , and (Me₃C)(Me₃Si)P? P(SiMe₃)? P(CMe₃)Cl 8 . The triphosphane (Me₃C)₂P? P(SiMe₃)? P(SiMe₃)₂ 5 is not obtainable as easily. The access to 5 starts by reacting PCl₃ with P(SiMe₃)(CMe₃)₂, forming (Me₃C)₂ P? PCl₂, which then with LiP(SiMe₃)₂ gives (Me₃C)₂ P? P(Cl)? P(SiMe₃)₂ 11 . Treating 11 with LiCMe₃ generates (Me₃C)₂P? P(H)? P(SiMe₃)₂ 16 , which can be lithiated by LiBu to give (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 13 and after reacting with Me₃SiCl, finally yields 5 . 8 is stable at ?70°C and undergoes cyclization to P₃(SiMe₃)(CMe₃)₂ in the course of warming to ambient temperature, while Me₃SiCl is split off. 7 , reacting with MeOH, forms [(Me₃C)₂P]₂PH. (Me₃C)₂P? P(Li)? P(SiMe₃)₂ 18 , which can be obtained by the reaction of 5 with LiBu, decomposes forming (Me₃C)₂P? P(Li)(SiMe₃), P(SiMe₃)₃, and LiP(SiMe₃)₂, in contrast to either (Me₃C)₂P? P(Li)? P(SiMe₃)(CMe₃) 19 or [(Me₃C)₂P]₂PLi, which are stable in ether solutions. The Li phosphides 1 , 2 , and 3 with BrH₂C? CH₂Br form the n-tetraphosphanes (Me₃C)(Me₃Si)P? [P(SiMe₃)]₂? P(SiMe₃)(CMe₃) 23 , (Me₃C)₂P? [P(SiMe₃)]₂? P(CMe₃)₂ 24 , and (Me₃C)(Me₃Si)P? [P(CMe₃)]₂? P(SiMe₃)(CMe₃) 25 , respectively. Li(Me₃Si)P? P(SiMe₃)₂, likewise, generates (Me₃Si)₂P? [P(SiMe₃)]₂? P(SiMe₃)₂ 26 . Just as the n-triphosphanes 4 , 5 , 6 , and 7 , the n-tetraphosphanes 23 , 24 , and 25 can be isolated as crystalline compounds. 23 , treated with LiBu, does nor form any stable n-tetraphosphides, whereas 24 yields (Me₃C)₂P? P(Li)? P(SiMe₃)? P(CMe₃)₂, that is stable in ethers. With MeOH, 24 , forms crystals of (Me₃C)₂P? P(H)? P(SiMe₃)? P(CMe₃)₂.     

Darstellung und Konfiguration von Tricarbonylchromat-Anionen mit SnCl3− und GeCl3− als Liganden

B₃N₃Me₆Cr(CO)₃ reacts with [AsPh₄] [SnCl₃] and [AsPh₄] [GeCl₃] in tetrahydrofuran to give [AsPh₄]₃[Cr(CO)₃(SnCl₃)₃] and [AsPh₄]₃[Cr(CO)₃(GeCl₃)₃], respectively. According to IR. and ¹³C-NMR.-data, the tricarbonylate anions possess a meridional configuration. The donor-acceptor properties of SnCl₃^? and GeCl₃^? in the anions [Cr(CO)₃(ECl₃)₃]^3? (E = Sn, Ge) are very similar. A similar synthesis of [AsPh₄]₃[Cr(CO)₃(SnF₃)₃] was not successful.     

Perfluororganocadmium-verbindungen als sehr wirksame perfluoralkylierungs- und perfluorphenylierungsmittel zur darstellung von perfluororganozinn- und -blei-verbindungen [1]

Perfluoroorgano tin and lead compounds can be prepared in high yields from the reactions of (CH₃)₃SnOCOCF₃ and (CH₃)₃Pb(OCOCF₃) with perfluoroorgano cadmium complexes. (CH₃)₃SiOCOCF₃ reacts with (CF₃)₂Cd complexes — probably via the intermediate (CH₃)₃SiCF₃ and CF₂ elimination — to form (CH₃)₃SiF and CF₃CdOCOCF₃ complexes. While the reaction of (CF₃)₂Cd·D with (CH₃)₃SnONO₂ yields CF₃NO as the only volatile product, (R_f)₂Cd·D (R_f  C₂F₅, iC₃F₇) forms R_fCdONO₂·D and (CH₃)₃SnR_f. The preparations and properties of the partly new compounds as well as the n.m.r. spectra are described.     

Chemie polyfunktioneller liganden LXIII. Adamantankäfigverbindungen mit den heteroelementen arsen,stickstoff und silizium

The reaction of 1,1,1-tris(diiodarsinomethyl)ethane, CH₃C(CH₂AsI₂)₃ (I), with i-C₃H₇NH₂, n-C₄H₉NH₂, C₆H₅NH₂, p-CH₃C₆H₄NH₂ and [(CH₃)₃Si]₂NH in the presence of (C₂H₅)₃N as auxiliary base in THF gives the adamantane cage compounds CH₃C(CH₂AsNC₃H₇)₃ (III), CH₃C(CH₂AsNC₄H₉)₃ (IV), CH₃C(CH₂AsNC₆H₅)₃ (V), CH₃C(CH₂AsNC₆H₄CH₃)₃ (VI) and CH₃C[CH₂AsNSi(CH₃)₃]₃ (VII). VII is also obtained in the reaction of I with NaN[Si(CH₃)₃]₂. The by-product (CH₃)₃SiO(CH₂)₄I (VIII) could be isolated in both syntheses of VII. All compounds have been characterized by mass spectrometry and infrared, Raman and ¹H NMR spectroscopy.     

Pseudohalogenometallverbindungen: LVIII. Reaktionen von diphenylphosphorylazid und perfluor-n-hexylsulfonylazid mit triphenylphosphan-komplexen von platin(0), rhodium(I), iridium(I), ruthenium(0), kobalt(II) und kupfer(I)

Diphenylphosphorylazide N₃P(O)(OPh)₂ reacts with Pt(PPh₃)₃, Pt(PPh₃)₂(C₂H₄), trans-RhCl(CO)(PPh₃)₂, Ru(CO)₃(PPh₃)₂, CoCl₂(PPh₃)₂ and CuCl(PPh₃)₂ to give the azido complexes Pt(PPh₃)₂(N₃)R, Pt(PPh₃)₂(N₃)₂R₂, the urylene complex RhCl(PPh₃)₂(RNCONR) and the phosphine imine complexes Ru(CO)₃(RPPh₃)₂, CoCl₂(RNPPh₃)₂, CuCl(RNPPh₃)₂, respectively, (RP(O)(OPh)₂). The oxidative addition of n-C₆F₁₃SO₂N₃ to Pt(PPh₃)₄ and Pt(PPh₃)₂(C₂H₄) affords the complexes Pt(PPh₃)₂(N₃)R and Pt(PPh₃)₂(N₃)₂R₂, respectively, (RSO₂C₆F₁₃. The compounds are characterized by elemental analysis and by their IR spectra.     

Bildung und Reaktionen P-funktioneller Phosphane

Formation and Reaction of P-functional Phosphanes The reaction of (me₃Si)₂PLi · 2 THF a (me = CH₃) with PCl₃ b at ?78°C via the intermediate (me₃Si)₂P? PCl₂ 1 yields [(me₃Si)₂P]₂PCl 2 and [(me₃Si)₂P]₂P? P(Sime₃)₂ 3 . By addition of me₃CLi c to the reaction mixture of a and b (molar ratio a:b:c (molar ratio a:b:c = 1:1:1) at ?60°C, 2 is formed as a main product, which reacts on to yield [(me₃Si)₂P]₂PH 4 (white crystals, mp = 73°C). By reactions of a:b:c in a molar ratio of 1:1:2 the cyclotetraphosphane (me₃C)₃ (me₃Si)P₄ 7 is accessible, and the additional formation of (me₃Si)₂PLi · 2 THF, (me₃Si)₃P and Li₃P₇ · 3 THF 13 was detected. Warming (me₃Si)₂P? PCl(Cme₃) 5 to 20°C produces cis- and trans-cyclotetraphosphanes (me₃Si)₂(me₃C)₂P₄. By running the reaction of a and b at ?78°C and adding me₃CLi only after 24 h, additionally to (me₃Si)₂P? PH Cme₃) and (me₃Si)₃P also (me₃Si)₂P? P(Cme₃)? P(Cme₃)? P (Sime₃)₂ is obtained, which is formed by metallation of (me₃Si)₂P? PCl(Cme₃) with me₃CLi and by further reaction of the intermediate (me₃Si)₂P? PLi(Cme₃) with (me₃Si)₂P? PCl(Cme₃). The reaction of (me₃Si₃)P with PCl₃ at ?78°C only yields (me₃Si)₂P? PCl₂ 1 and me₃SiCl. On addition of me₃CLi (?78°C, molar ratio = 1:1:1) preferrably 2 and (me₃Si)₂P? PCl(Cme₃) are formed, whereas after warming the mixture to 20°C, 4 and (me₃Si)₂P? PH(Cme₃) are found to be the main products. These reactions are induced by the cleavage of 1 by means of me₃CLi, and by the formation of (me₃Si)₂PLi and me₃C? PCl₂.     

单氢钌配合物与水和2,2,2-三氟乙醇的作用机理

利用原位¹H和³¹P NMR对单氢钌配合物TpRu(PPh₃)(CH₃CN)H [Tp＝hydrotris(pyrazolyl)borate]与H₂O和酸性HOCH₂CF₃的反应进行了研究, 结果显示相应的反应产物分别是TpRu(PPh₃)(CH₃CN)(OH) 和TpRu(PPh₃)(CH₃CN)(OCH₂CF₃). 观察到反应过程中Ru-H…HOH和Ru-H…HOCH₂CF₃分子间的氢键作用. 提出了生成TpRu(PPh₃)(CH₃CN)(OH)和TpRu(PPh₃)(CH₃CN)(OCH₂CF₃)的不同作用机理. 在水存在下, TpRu(PPh₃)(CH₃CN)H 与H₂O反应, 经过中间体TpRu(PPh₃)(H₂O)H和TpRu(PPh₃)(OH)(η²-H₂)生成产物TpRu(PPh₃)(CH₃CN)(OH). 而TpRu(PPh₃)(CH₃CN)H与酸性HOCH₂CF₃反应时, 单氢配体被质子化形成中间体[TpRu(PPh₃)(CH₃CN)- (η²-H₂)](OCH₂CF₃), 进而转变成产物TpRu(PPh₃)(CH₃CN)(OCH₂CF₃). TpRu(PPh₃)(CH₃CN)(OCH₂CF₃)与H₂作用, 经中间体TpRu(PPh₃)(HOCH₂CF₃)H生成TpRu(PPh₃)(η²-H₂)H.     

A comparison of local structures in crystalline P(EO)3LiCF3SO3 and glyme-LiCF3SO3 systems

The newly discovered crystal structures of CH₃(OCH₂CH₂)OCH₃(LiCF₃SO₃)₂, monoglyme:(LiTf)₂, and CH₃(OCH₂CH₂)₃OCH₃(LiCF₃SO₃)₂, triglyme:(LiTf)₂, are briefly described. The coordination of lithium cations and the CF₃SO₃⁻ anions in these structures is compared with the cation and anion coordination in the crystalline phase of high molecular weight P(EO)₃LiCF₃SO₃. Comparison is also made with the previously reported crystalline phase of CH₃(OCH₂CH₂)₂OCH₃LiCF₃SO₃, diglyme:LiTf. A tendency to form trans-gauche-trans conformations for the bond order -O-C-C-O- is noted in adjacent ethylene oxide sequences interacting with a five-coordinate lithium ion.     

Beiträge zur Koordinationschemie von Rhenium(III)chlorid in nichtwäßrigen Lösungen

Coordination reactions of solutions of Re₃Cl₉ in acetonitrile, propanediol-1,2-carbonate, acetone and dimethylsulfoxide yield compounds with unchanged metal-cluster structures. The following compounds were isolated and characterised: [Et ₄N]₃[Re₃Cl₉(N₃)₃], [Et ₄N]₃[Re₃Cl₆(N₃)₆], [Et ₄N]₃[Re₃Cl₃(N₃)₉], [Et ₄N]₃[Re₃Cl₉(CN)₃], [Et ₄N]₃[Re₃Cl₃(CN)₉],Et ₄N]₃[Re₃Cl₉(NCS)₃], [Et ₄N]₃[Re₃Cl₆(NCS)₆], [Et ₄N]₃[Re₃Cl₃(NCS)₉], Re₃Cl₉·(DMSO)₃, Re₃Cl₉·(HMPT)₃.     

Fluoridolyse von Cyclophosphazenen und linearen Polyphosphazenen

Fluoridolysis of Cyclophosphazenes and Lineary Polyphosphazenes The fluorination of nongeminal trans P₃N₃Cl₄(NEt₂)₂ and nongeminal trans P₃N₃Cl₃(NEt₂)₃ with the fluorination agent Et₃N · 0,6 HF ( B ) occurs under retention of configuration yielding P₃N₃Cl₂F₂(NEt₂)₂ and P₃N₃F₄(NEt₂)₂ or P₃N₃F₃(NEt₂)₃, respectively. P₃N₃Cl₆ is nearly quantitatively converted into P₃N₃F₆. Poly(dichlorophosphazene) reacts to a poly(difluorophosphazene), (PNF₂)_n, distinguished by a moderate solubility in THF.     

Perfluoralkyljod-verbindungen: das trifluormethyljoddinitrat CF3J(NO3)2

CF₃I(NO₃)₂ is formed from the reactions of CF₃IF₂ or CF₃IO with N₂O₅ as well as CF₃I with ClNO₃. During the reactions of CF₃IF₂ with N₂O₅ or CF₃I with ClNO₃ the intermediate products CF₃IF(NO₃) or CF₃ICl(NO₃) can be identified. The preparations, properties, ¹⁹F-nmr spectra and the thermal decomposition of CF₃I(NO₃)₂ are described.     

Tricarbonyl Derivatives of Manganese(I) with Diphosphinite Chelating Ligands

Reaction of [MnBr(CO)₃L] [L = Ph₂POCH₂CH₂OPPh₂, L¹ , {(CH₃)₂CH}₂POCH₂CH₂OP{CH(CH₃)₂}₂, L² ] with AgO₃SCF₃ and AgO₂CCF₃ in dichloromethane afforded the new complexes [Mn(O₃SCF₃)(CO)₃L] and [Mn(O₂CCF₃)(CO)₃L], respectively. Substitution of O₃SCF₃ resulted in the new species [Mn(SCN)(CO)₃L], [Mn(NCCH₃)(CO)₃L](O₃SCF₃) and, in the case of L² , [Mn(CN)(CO)₃L²]. By contrast, any attempt to displace the O₂CCF₃ ligand in the same way was unsuccessful. After maintaining for some days the complex [Mn(CH₃CN)(CO)₃L¹](O₃SCF₃) in dichloromethane at room temperature, the new complex [MnCl(CO)₃L¹] was formed. All the new complexes were characterized by elemental analysis, mass spectrometry and IR and NMR spectroscopies. In the case of [Mn(O₃SCF₃)(CO)₃L¹], [Mn(O₂CCF₃) (CO)₃L¹], [MnCl(CO)₃L¹], [Mn(CH₃CN) (CO)₃L²] (O₃SCF₃), [Mn(CN)(CO)₃L²] and [Mn(O₂CCF₃)(CO)₃L²], together with the previously synthesized complex [MnBr(CO)₃L²], suitable crystals for X‐ray structural analysis were isolated. In all of them the Mn atom adopts six‐coordination by bonding to the three CO ligands, the two P atoms of L and either one C atom (CN), one oxygen atom (O₂CCF₃, O₃SCF₃), one N atom (CH₃CN, SCN) or the halogen atom (Cl, Br).     

Molecular Nitrides with Titanium and Group 13–15 Elements

Several heterometallic nitrido complexes were prepared by reaction of the imido–nitrido titanium complex [{Ti(η⁵‐C₅Me₅)(μ‐NH)}₃(μ₃‐N)] ( 1 ) with amido derivatives of Group 13–15 elements. Treatment of 1 with bis(trimethylsilyl)amido [M{N(SiMe₃)₂}₃] derivatives of aluminum, gallium, or indium in toluene at 150–190 °C affords the single‐cube amidoaluminum complex [{(Me₃Si)₂N}Al{(μ₃‐N)₂(μ₃‐NH)Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}] ( 2 ) or the corner‐shared double‐cube compounds [M(μ₃‐N)₃(μ₃‐NH)₃{Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}₂] [M=Ga ( 3 ), In ( 4 )]. Complexes 3 and 4 were also obtained by treatment of 1 with the trialkyl derivatives [M(CH₂SiMe₃)₃] (M=Ga, In) at high temperatures. The analogous reaction of 1 with [{Ga(NMe₂)₃}₂] at 110 °C leads to [{Ga(μ₃‐N)₂(μ₃‐NH)Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}₂] ( 5 ), in which two [GaTi₃N₄] cube‐type moieties are linked through a gallium–gallium bond. Complex 1 reacts with one equivalent of germanium, tin, or lead bis(trimethylsilyl)amido derivatives [M{N(SiMe₃)₂}₂] in toluene at room temperature to give cube‐type complexes [M{(μ₃‐N)₂(μ₃‐NH)Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}] [M=Ge ( 6 ), Sn ( 7 ), Pb ( 8 )]. Monitoring the reaction of 1 with [Sn{N(SiMe₃)₂}₂] and [Sn(C₅H₅)₂] by NMR spectroscopy allows the identification of intermediates [RSn{(μ₃‐N)(μ₃‐NH)₂Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}] [R=N(SiMe₃)₂ ( 9 ), C₅H₅ ( 10 )] in the formation of 7 . Addition of one equivalent of the metalloligand 1 to a solution of lead derivative 8 or the treatment of 1 with a half equivalent of [Pb{N(SiMe₃)₂}₂] afford the corner‐shared double‐cube compound [Pb(μ₃‐N)₂(μ₃‐NH)₄{Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}₂] ( 11 ). Analogous antimony and bismuth derivatives [M(μ₃‐N)₃(μ₃‐NH)₃{Ti₃(η⁵‐C₅Me₅)₃(μ₃‐N)}₂] [M=Sb ( 12 ), Bi ( 13 )] were obtained through the reaction of 1 with the tris(dimethylamido) reagents [M(NMe₂)₃]. Treatment of 1 with [AlCl₂{N(SiMe₃)₂}(OEt₂)] affords the precipitation of the singular aluminum–titanium square‐pyramidal aggregate [{{(Me₃Si)₂N}Cl₃Al₂}(μ₃‐N)(μ₃‐NH)₂{Ti₃(η⁵‐C₅Me₅)₃(μ‐Cl)(μ₃‐N)}] ( 14 ). The X‐ray crystal structures of 5 , 11 , 13 , 14 , and [AlCl{N(SiMe₃)₂}₂] were determined.     

Über Umsetzungen von weißem Phosphor mit Metallorganylen

Reactions of White Phosphorus with Lithium Alkyls The reaction of white phosphorus with Lime (me = CH₃) (molar ratio P₄: Lime = 1:1) in DME or THF via insoluble lithium polyphosphides yields Li₃P₇ 1 , Li₂P₇me 2 and LiP₇me₂ 3 , which react with me₃SiCl or meBr to form P₇(Sime₃)₃, P₇(Sime₃)₂me and P₇me₃, respectively. All of these compounds were characterized by ³¹P-n.m.r. By higher amounts of Lime (molar ratio P₄:Lime = 1:2) Li₂P₇me is decomposed. The analogous reaction of P₄ with LiCme₃ yields Li₃P₇, LiP₇(Cme₃)₂, Li₂P₇Cme₃, and additionally LiP₄(Cme₃)₃ and LiP₃(Cme₃)₂. Again insoluble lithium polyphosphides were observed as intermediates. Addition of me₃SiCl to the reaction mixture affords P₇(Sime₃)₃, P₇(Sime₃)₂(Cme₃), P₇(Sime₃)(Cme₃)₂ P₄(Sime₃)(Cme₃)₃, and P₃(Sime₃)(Cme₃)₂. In n-hexane/THF the reaction of P₄ with LiCme₃ in the molar ratio of 1:2 predominantly yields the fourmembered ring LiP₄(Cme₃)₃ besides some of the three-membered ring LiP₃(Cme₃)₂, which with me₃SiCl yield P₄(Sime₃)(Cme₃)₃ and P₃(Sime₃)(Cme₃)₂. In addition to the mentioned main products are found: all compounds of the group P₈(Sime₃)₅(Cme₃) to P₈(Sime₃)(Cme₃)₅, the five-membered rings P₅(Sime₃)₂(Cme₃)₃ and P₅(Sime₃)₃(Cme₃)₂ as well as P(Sime₃)₂Cme₃ and P(Sime₃)₃.     

Cluster chemistry: XXXIX. Gold—ruthenium clusters with sulphur ligands: Synthesis and structure of HRu3Au(μ3-S)(CO)9(PPh3), Ru3Au(μ3-SBut)(CO)9(PPh3) and Ru3Au2(μ3-S)(CO)9(PPh3)2

H₂Ru₃(μ₃-S)(CO)₉ is deprotonated by K[HBBu^s₃] to give cluster anions which react with [O{Au(PPh₃)}₃]⁺ or with AuCl(PPh₃)/T1⁺ to give HRu₃Au(μ₃-S)(CO)₉(PPh₃) (1) and Ru₃Au₂(μ₃-S)(CO)₉(PPh₃)₂ (3). A similar sequence with HRu₃(μ₃-SBu^t)(CO)₉ leads to Ru₃Au(μ₃-SBu^t)(CO)₉(PPh₃) (2) as the main product although some 1 also forms, indicating SC cleavage competes with deprotonation of HRu₃(μ₃-SBu^t)(CO)₉ by [HBBu^s₃]^?. The X-ray crystal structures of 1, 2 and 3 are described; (1) and (2) have “butterfly” AuRu₃ cores with markedly different hinge angles of 119 and 148° respectively, while 3 has a trigonal-bipyramidal Au₂Ru₃ skeleton. All three clusters have the sulphur atom symmetrically bridging the Ru₃ triangular face.