Binding N2, N2H2, N2H4, and NH3 to transition-metal sulfur sites: modeling potential intermediates of biological N2 fixation

In the quest for low-molecular-weight metal sulfur complexes that bind nitrogenase-relevant small molecules and can serve as model complexes for nitrogenase, compounds with the [Ru(PiPr(3))('N(2)Me(2)S(2)')] fragment were found ('N(2)Me(2)S(2)'(2-)=1,2-ethanediamine-N,N'-dimethyl-N,N'-bis(2-benzenethiolate)(2-)). This fragment enabled the synthesis of a first series of chiral metal sulfur complexes, [Ru(L)(PiPr(3))('N(2)Me(2)S(2)')] with L=N(2), N(2)H(2), N(2)H(4), and NH(3), that meet the biological constraint of forming under mild conditions. The reaction of [Ru(NCCH(3))(PiPr(3))('N(2)Me(2)S(2)')] (1) with NH(3) gave the ammonia complex [Ru(NH(3))(PiPr(3))('N(2)Me(2)S(2)')] (4), which readily exchanged NH(3) for N(2) to yield the mononuclear dinitrogen complex [Ru(N(2))(PiPr(3))('N(2)Me(2)S(2)')] (2) in almost quantitative yield. Complex 2, obtained by this new efficient synthesis, was the starting material for the synthesis of dinuclear (R,R)- and (S,S)-[micro-N(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] ((R,R)-/(S,S)-3). (Both 2 and 3 have been reported previously.) The as-yet inexplicable behavior of complex 3 to form also the R,S isomer in solution has been revealed by DFT calculations and (2)D NMR spectroscopy studies. The reaction of 1 or 2 with anhydrous hydrazine yielded the hydrazine complex [Ru(N(2)H(4))(PiPr(3))('N(2)Me(2)S(2)')] (6), which is a highly reactive intermediate. Disproportionation of 6 resulted in the formation of mononuclear diazene complexes, the ammonia complex 4, and finally the dinuclear diazene complex [micro-N(2)H(2)[Ru(PiPr(3))('N(2)Me(2)S(2)')](2)] (5). Dinuclear complex 5 could also be obtained directly in an independent synthesis from 1 and N(2)H(2), which was generated in situ by acidolysis of K(2)N(2)(CO(2))(2). Treatment of 6 with CH(2)Cl(2), however, formed a chloromethylated diazene species [[Ru(PiPr(3))('N(2)Me(2)S(2)')]-micro-N(2)H(2)[Ru(Cl)('N(2)Me(2)S(2)CH(2)Cl')]] (9) ('N(2)Me(2)S(2)CH(2)Cl'(2-) =1,2-ethanediamine-N,N'-dimethyl-N-(2-benzenethiolate)(1-)-N'-(2-benzenechloromethylthioether)(1-)]. The molecular structures of 4, 5, and 9 were determined by X-ray crystal structure analysis, and the labile N(2)H(4) complex 6 was characterized by NMR spectroscopy.     

N,N'-ethylenebis(pyridoxylideneiminato) and N,N'-ethylenebis(pyridoxylaminato): synthesis, characterization, potentiometric, spectroscopic, and DFT studies of their vanadium(IV) and vanadium(V) complexes

The Schiff base N,N'-ethylenebis(pyridoxylideneiminato) (H(2)pyr(2)en, 1) was synthesized by reaction of pyridoxal with ethylenediamine; reduction of H(2)pyr(2)en with NaBH(4) yielded the reduced Schiff base N,N'-ethylenebis(pyridoxylaminato) (H(2)Rpyr(2)en, 2); their crystal structures were determined by X-ray diffraction. The totally protonated forms of 1 and 2 correspond to H(6)L(4+), and all protonation constants were determined by pH-potentiometric and (1)H NMR titrations. Several vanadium(IV) and vanadium(V) complexes of these and other related ligands were prepared and characterized in solution and in the solid state. The X-ray crystal structure of [V(V)O(2)(HRpyr(2)en)] shows the metal in a distorted octahedral geometry, with the ligand coordinated through the N-amine and O-phenolato moieties, with one of the pyridine-N atoms protonated. Crystals of [(V(V)O(2))(2)(pyren)(2)].2 H(2)O were obtained from solutions containing H(2)pyr(2)en and oxovanadium(IV), where Hpyren is the "half" Schiff base of pyridoxal and ethylenediamine. The complexation of V(IV)O(2+) and V(V)O(2) (+) with H(2)pyr(2)en, H(2)Rpyr(2)en and pyridoxamine in aqueous solution were studied by pH-potentiometry, UV/Vis absorption spectrophotometry, as well as by EPR spectroscopy for the V(IV)O systems and (1)H and (51)V NMR spectroscopy for the V(V)O(2) systems. Very significant differences in the metal-binding abilities of the ligands were found. Both 1 and 2 act as tetradentate ligands. H(2)Rpyr(2)en is stable to hydrolysis and several isomers form in solution, namely cis-trans type complexes with V(IV)O, and alpha-cis- and beta-cis-type complexes with V(V)O(2). The pyridinium-N atoms of the pyridoxal rings do not take part in the coordination but are involved in acid-base reactions that affect the number, type, and relative amount of the isomers of the V(IV)O-H(2)Rpyr(2)en and V(V)O(2)-H(2)Rpyr(2)en complexes present in solution. DFT calculations were carried out and support the formation and identification of the isomers detected by EPR or NMR spectroscopy, and the strong equatorial and axial binding of the O-phenolato in V(IV)O and V(V)O(2) complexes. Moreover, the DFT calculations done for the [V(IV)O(H(2)Rpyr(2)en)] system indicate that for almost all complexes the presence of a sixth equatorial or axial H(2)O ligand leads to much more stable compounds.     

Synthesis, Spectroscopic Characterization, and Structural Studies of Bis(&mgr;-sulfido)bis[{O,O-dialkyl (alkylene) dithiophosphato}oxomolybdenum(V)] Complexes. Crystal Structures of Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4)

A series of new complexes, Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) (where R = Et, n-Pr, i-Pr) and Mo(2)O(2)S(2)[S(2)POGO](2) (where G = -CH(2)CMe(2)CH(2)-, -CMe(2)CMe(2)-) have been prepared by the dropwise addition of an ethanolic solution of the ammonium or sodium salt of the appropriate O,O-dialkyl or -alkylene dithiophosphoric acid, or the acid itself, to a hot aqueous solution of molybdenum(V) pentachloride. The complexes were also formed by heating solutions of Mo(2)O(3)[S(2)P(OR)(2)](4) or Mo(2)O(3)[S(2)POGO](4) species in glacial acetic acid. The Mo(2)O(2)S(2)[S(2)P(OR)(2)](2) and Mo(2)O(2)S(2)[S(2)POGO](2) compounds were characterized by elemental analyses, (1)H, (13)C, and (31)P NMR, and infrared and Raman spectroscopy, as were the 1:2 adducts formed on reaction with pyridine. The crystal structures of Mo(2)O(2)S(2)[S(2)P(OEt(2))](2), Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5), and Mo(2)O(3)[S(2)P(OPh)(2)](4) were determined. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2) (1) crystallizes in space group C2/c, No. 15, with cell parameters a = 15.644(3) ?, b = 8.339(2) ?, c = 18.269(4) ?, beta = 103.70(2) degrees, V = 2315.4(8) ?(3), Z = 4, R = 0.0439, and R(w) = 0.0353. Mo(2)O(2)S(2)[S(2)P(OEt)(2)](2).2NC(5)H(5) (6) crystallizes in space group P&onemacr;, No. 2, with the cell parameters a = 12.663(4) ?,b = 14.291(5) ?, c = 9.349(3) ?, alpha = 100.04(3) degrees, beta = 100.67(3) degrees, gamma = 73.03(3) degrees V = 1557(1) ?(3), Z = 2, R = 0.0593, and R(w) = 0.0535. Mo(2)O(3)[S(2)P(OPh)(2)](4) (8) crystallizes in space group P2(1)/n, No. 14, with cell parameters a = 15.206(2)?, b = 10.655(3)?, c = 19.406(3)?, beta = 111.67(1) degrees, V = 2921(1)?(3), Z = 2, R = 0.0518, R(w) = 0.0425. The immediate environment about the molybdenum atoms in 1 is essentially square pyramidal if the Mo-Mo interaction is ignored. The vacant positions in the square pyramids are occupied by two pyridine molecules in 6, resulting in an octahedral environment with very long Mo-N bonds. The terminal oxygen atoms in both 1 and 6 are in the syn conformation. In 8, which also has a distorted octahedral environment about molybdenum, two of the dithiophosphate groups are bidentate as in 1 and 6, but the two others have one normal Mo-S bond and one unusually long Mo-S bond.     

Acidities of platinum(II) mu-hydroxo complexes bearing diphosphine ligands

The pK(a) values in DMSO of the monoprotic complexes [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) (4) (L(2) = Ph(2)PCH(2)CH(2)PPh(2) (dppe), Ph(2)PCMe(2)PPh(2) (dppip)) are 11.9 +/- 0.1 (L(2) = dppe) and 13.5 +/- 0.2 (L(2) = dppip) as determined by (31)P NMR equilibrium titration with bases of known pK(a). Complexes 4 were prepared by treatment of [L(2)Pt(mu-OH)](2)(2+) (1) with N-methylaniline. The oxo complexes [(L(2)Pt)(2)(mu-O)(mu-NMePh)](+), formed in the equilibrium titration reactions, were independently synthesized in THF by deprotonation of [(L(2)Pt)(2)(mu-OH)(mu-NMePh)](2+) with NaN(SiMe(3))(2) and characterized as NaBF(4) adducts. Similar experiments with diprotic [L(2)Pt(mu-OH)](2)(2+) (L(2) = dppe, Ph(2)PCH(2)CH(2)CH(2)PPh(2) (dppp)) were complicated by exchange processes and were less conclusive, giving pK(a1) < 18 and pK(a2) > 18 in DMSO.     

3[(dx2-y2,dxy)(pz)] excited state of binuclear copper(I) phosphine complexes: effect of copper-ligand and copper-copper interactions on excited state properties and photocatalytic reductions of the 4,4'-dimethyl-2,2'-bipyridinium ion in alcohols

A comprehensive study of the structural and spectroscopic properties of two-, three-, and four-coordinate copper(I) complexes with aliphatic phosphine ligands is presented. All complexes described in this work are characterized by X-ray crystallography. The intramolecular Cu...Cu separations in [Cu2(dcpm)2]X2, [Cu2(dcpm)2-(CH3CN)2]X2, and [Cu2(dmpm)3]-(ClO4)2 (dcpm=bis(dicyclohexylphosphino)methane; dmpm=bis(dimethylphosphino)methane; X=ClO4- and PF6-) are in the range 2.639(2)-3.021(2) A. The anion...CuI interaction is weak, as evidenced by the nearest O...Cu separation of 2.558(6) A in [Cu2(dcpm)2](ClO4)2 and the closest Cu...F separation of 2.79(1) A in [Cu2(dcpm)2](PF6)2. The absorption bands of [Cu2(dcpm)2]X2 and [Cu2(dcpm)2(CH3CN)2]X2 (X=ClO4- and PF6-) at lambda max 307-311 nm in CH2Cl2 are assigned as 1[3d sigma* --> 4p sigma] transitions; this has been confirmed by resonance Raman spectroscopy. The triplet emissions in the visible region from these complexes exhibit long lifetimes and are sensitive to the environment. The lowest emissive excited state is tentatively ascribed as 3[(dx2-y2, dxy)(pz)] in nature. For [Cu2(dcpm)2]2+ salts in CH3CN, the emissive species is postulated to be [Cu2(dcpm)2(CH3CN)n]2+ (n > or = 3). Efficient photocatalytic reduction of MV2+ (4,4'-dimethyl-2,2'-bipyridinium) to MV+ in alcoholic solutions by using [Cu2(dcpm)2](PF6)2 or [Cu2(dppm)2(CH3CN)4](ClO4)2 (dppm=bis(diphenylphosphino)methane) as a catalyst has been observed. The addition of CH3CN or use of [Cu2(dmpm)3]-(ClO4)2 as a catalyst did not allow photocatalytic reduction processes to occur.     

Novel supramolecular isomerism in coordination polymer synthesis from unsymmetrical bridging ligands: solvent influence on the ligand placement orientation and final network structure

The assembly of Co(NCS)(2) with 1-methyl-1'-(3-pyridyl)-2-(4-pyridyl)ethene (L(1)) exhibits a novel supramolecular isomerism of [Co(L(1))(2)(NCS)(2)](infinity) caused by different placement orientation of L(1) around metal centers. The reaction in MeOH/H(2)O and EtOH/H(2)O resulted in a double chain structure of 1, and that in EtOH/CH(3)NO(2) led to an open framework structure of 2. The reaction in MeOH/CH(3)NO(2) solvent system concomitantly afforded 1 and 2. The assemblies of 1-(3-pyridyl)-2-(4-pyrimidyl)ethene (L(2)) with Co(NCS)(2) created the water-coordinated complexes of Co(L(2))(2)(H(2)O)(2)(NCS)(2) (3 and 4), an MeOH coordinated complex of Co(L(2))(2)(H(2)O)(2)(NCS)(2) (5), and an open framework coordination polymer of [Co(L(1))(2)(NCS)(2)](infinity) (6) depending on the reaction solvent system. From these observations, it is suggested that in the formation of 1, the solvent-coordinated intermediate species would be generated first and its trans coordination configuration should define the placement orientation of L(1) in the resulting polymer of 1. On the other hand, it is presumed that the solvent-coordinated intermediate would not be produced during the formation of 2 due to the weaker coordination ability of EtOH and CH(3)NO(2) molecules. The open framework coordination polymers of 2 and 6 are converted in the solid state into the isomeric coordination polymer of 1 and hydrogen bonded network structure of 3, respectively.     

Dititanium complexes of preorganized binucleating bis(amidinates)

Four different dianionic bis(amidinate) ligands ((iPr)L(DBF)(2)(-), (tBu,Et)L(DBF)(2)(-), (iPr)L(Xan)(2)(-), (tBu,Et)L(Xan)(2)(-)) featuring rigid dibenzofuran (DBF) and 9,9-dimethylxanthene (Xan) backbones have been used to prepare several new dititanium complexes. Reaction of the free-base bis(amidines) (LH(2)) with 2 equiv of Ti(NMe(2))(4) forms the hexaamido derivatives (iPr)L(DBF)Ti(2)(NMe(2))(6) (1), (tBu,Et)L(DBF)Ti(2)(NMe(2))(6) (2), (iPr)L(Xan)Ti(2)(NMe(2))(6) (3), and (tBu,Et)L(Xan)Ti(2)(NMe(2))(6) (4) in good yields. Compound 4, which features an unsymmetrically substituted bis(amidinate) ligand, was isolated as an 8:1 mixture of rotational diastereomers with C(2) and C(s)() symmetry, respectively. The two diastereomers interconvert upon heating, and at equilibrium the C(2) isomer is preferred thermodynamically by 0.2 kcal/mol. Compound 3 reacts with excess Me(3)SiCl in toluene to form the mixed amido-chloride derivative (iPr)L(Xan)Ti(2)(NMe(2))(2)Cl(4) (5) in low-moderate yield. Alternatively, 5 is also prepared by reaction of (iPr)L(Xan)H(2) with 2 equiv of Ti(NMe(2))(2)Cl(2) in good yield. Compound 3 reacts with CO(2) to form the red carbamate derivative (iPr)L(Xan)Ti(2)(NMe(2))(4)(O(2)CNMe(2))(2) (6) in moderate yield. Infrared data for 6 indicates bidentate coordination of the carbamate ligands. Metathesis reaction of (iPr)L(Xan)Li(2) with 2 equiv of CpTiCl(3) affords (iPr)L(Xan)Ti(2)Cp(2)Cl(4) (7) in moderate yield. Reduction of 7 with 1% Na amalgam in toluene solution affords the paramagnetic dititanium(III) complex (iPr)L(Xan)Ti(2)Cp(2)Cl(2) (8) in good yield. Structural studies reveal that 8 features two bridging chloride ligands. Reaction of the free-base bis(amidines) with 2 equiv of CpTiMe(3) forms the red sigma-alkyl derivatives (iPr)L(DBF)Ti(2)Cp(2)Me(4) (9), (tBu,Et)L(DBF)Ti(2)Cp(2)Me(4) (10), and (iPr)L(Xan)Ti(2)Cp(2)Me(4) (11) in good yields. Structural data are presented for compounds 4, 5, 8, and 9.     

二氟二碘甲烷与乙烯基乙醚的反应及其产物的化学转化

二氟二碘甲烷(CF2I2,1)与乙烯基乙醚和Na2S2O4在DMSO和乙醇的混合溶剂中反应得3,3-二氟-3-碘丙醛的乙缩醛[ICF2CH2CH(OEt)2](3).3在锌粉的作用下发生偶联反应生成二缩醛[(EtO)2CHCH2CF2CF2CH2CH(OEt)2](5)。缩醛3或5与烯醇硅醚在SnCl4作用下发生交叉偶联反应。3在锌粉或保险粉的引下与烯醇硅醚发生加成反应。3和5分别转化成硫缩醛ICF2CH2CH(SR)2(13),(RS)2CHCH2CF2CF2CH2CH(SR)2(14)或O,S-缩醛。13消HI得1,1-二氟乙烯衍生物。     

Ring-closing metathesis reactions of terminal alkene-derived cyclic phosphazenes

The first examples of ring-closing metathesis (RCM) reactions of a series of terminal alkene-derived cyclic phosphazenes have been carried out. The tetrakis-, hexakis-, and octakis(allyloxy)cyclophosphazenes (NPPh(2))(NP(OCH(2)CH=CH(2))(2))(2) (1), N(3)P(3)(OCH(2)CH=CH(2))(6) (2), and N(4)P(4)(OCH(2)CH=CH(2))(8) (3) and the tetrakis(allyloxy)-S-phenylthionylphosphazene (NS(O)Ph)[NP(OCH(2)CH=CH(2))(2)](2) (4) were prepared by the reactions of CH(2)=CHCH(2)ONa with the cyclophosphazenes (NPPh(2))(NPCl(2))(2), N(3)P(3)Cl(6), and N(4)P(4)Cl(8) and the S-phenylthionylphosphazene (NS(O)Ph)(NPCl(2))(2). The reactions of 1-4 with Grubbs first-generation olefin metathesis catalyst Cl(2)Ru=CHPh(PCy(3))(2) resulted in the selective formation of seven-membered di-, tri-, and tetraspirocyclic phosphazene compounds (NPPh(2))[NP(OCH(2)CH=CHCH(2)O)](2) (5), N(3)P(3)(OCH(2)CH=CHCH(2)O)(3) (6), and N(4)P(4)(OCH(2)CH=CHCH(2)O)(4) (7) and the dispirocyclic S-phenylthionylphosphazene compound (NS(O)Ph)[NP(OCH(2)CH=CHCH(2)O)](2) (8). X-ray structural studies of 5-8 indicated that the double bond of the spiro-substituted cycloalkene units is in the cis orientation in these compounds. In contrast to the reactions of 1-4, RCM reactions of the homoallyloxy-derived cyclophosphazene and thionylphosphazene (NPPh(2))[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (9) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CH(2))(2)](2) (10) with the same catalyst resulted in the formation of 11-membered diansa compounds NPPh(2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (11) and (NS(O)Ph)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)](2) (13) and the intermolecular doubly bridged ansa-dibino-ansa compounds 12 and 14. The X-ray structural studies of compounds 11 and 13 indicated that the double bonds of the ansa-substituted cycloalkene units are in the trans orientation in these compounds. The geminal bis(homoallyloxy)tetraphenylcyclotriphosphazene [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CH(2))(2)] (15) upon RCM with Grubbs first- and second-generation catalysts gave the spirocyclic product [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)] (16) along with the geminal dibino-substituted dimeric compound [NPPh(2)](2)[NP(OCH(2)CH(2)CH=CHCH(2)CH(2)O)(2)PN][NPPh(2)](2) (17) as the major product. The dibino compound 17, upon reaction with the Grubbs second-generation catalyst, was found to undergo a unique ring-opening metathesis reaction, opening up the bino bridges and partially converting to the spirocyclic compound 16.     

Lithium complexes supported by amine bis-phenolate ligands as efficient catalysts for ring-opening polymerization of L-lactide

Lithium complexes bearing dianionic amine bis(phenolate) ligands are described. Reactions of ligand precursors H(2)O(2)NN(Me), H(2)O(2)NN(Py) or H(2)O(2)NO(Me) [H(2)O(2)NN(Me)=Me(2)NCH(2)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2); H(2)O(2)NN(Py)=(2-C(5)H(4)N)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2); H(2)O(2)NO(Me)=MeOCH(2)CH(2)N-(CH(2)-2-HO-3,5-C(6)H(2)((t)Bu)(2))(2)] with 2.2 molar equivalents of (n)BuLi in diethylether afford (Li(2)O(2)NN(Me))(2) (1), (Li(2)O(2)NN(Py))(2) (2) and (Li(2)O(2)NO(Me))(2) (3) as tetra-nuclear lithium complexes. The crystalline solids of partially hydrolyzed product, (LiO(HO)NN(Py)) (4), were obtained from recrystallization of 2 in diethylether solution for three months. The synthesis of (LiO(HO)NO(Me))(2) (5) was carried out at ambient temperature by carefully layering a solution of water in hexane on top of a solution of 3 in Et(2)O. Crystalline solids of were obtained after two months. Molecular structures are reported for compounds 1, 3, 4 and 5. Compounds 1-3 show excellent catalytic activities toward the ring-opening polymerization of L-lactide in the presence of benzyl alcohol.     

Formation of organolithium hetero-aggregates [Li4Ar2(nBu)2] (Ar=C6H4CH(Me)NMe2-2) during the directed ortho-lithiation of [1-(dimethylamino)ethyl]benzene

(R)-[1-(Dimethylamino)ethyl]benzene reacts with nBuLi in a 1:1 molar ratio in pentane to quantitatively yield a unique hetero-aggregate (2 a) containing the lithiated arene, unreacted nBuLi, and the complexed parent arene in a 1:1:1 ratio. As a model compound, [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)] (2 b) was prepared from the quantitative redistribution reaction of the parent lithiated arene Li(C(6)H(4)CH(Me)NMe(2)-2) with nBuLi in a 1:1 molar ratio. The mono-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))] (2 c) and the bis-Et(2)O adduct [Li(4)(C(6)H(4)CH(Me)NMe(2)-2)(2)(nBu)(2)(OEt(2))(2)] (2 d) were obtained by re-crystallization of 2 b from pentane/Et(2)O and pure Et(2)O, respectively. The single-crystal X-ray structure determinations of 2 b-d show that the overall structural motifs of all three derivatives are closely related. They are all tetranuclear Li aggregates in which the four Li atoms are arranged in an almost regular tetrahedron. These structures can be described as consisting of two linked dimeric units: one Li(2)Ar(2) dimer and a hypothetical Li(2)nBu(2) dimer. The stereochemical aspects of the chiral Li(2)Ar(2) fragment are discussed. The structures as observed in the solid state are apparently retained in solution as revealed by a combination of cryoscopy and (1)H, (13)C, and (6)Li NMR spectroscopy.     

Synthesis and structure of new carborane-substituted cyclotriphosphazenes

The reactions of [N(3)P(3)Cl(6)] with one, two, or three equivalents of the difunctional 1,2-closo-carborane C(2)B(10)H(10)[CH(2)OH](2) and K(2)CO(3) in acetone have been investigated. These reactions led to the new spiro-closo-carboranylphosphazenes gem-[N(3)P(3)Cl(6-2n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (1), 2 (2)) and the first fully carborane-substituted phosphazene gem-[N(3)P(3)[(OCH(2))(2)C(2)B(10)H(10)](3)] (3). A bridged product, non-gem-[N(3)P(3)Cl(4)[(OCH(2))(2)C(2)B(10)H(10)]] (4), was also detected. The reaction of the well-known spiro derivatives [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)] and [N(3)P(3)Cl(4)(O(2)C(12)H(8))] with the same carborane-diol and K(2)CO(3) in acetone gave the new compounds gem-[N(3)P(3)(O(2)C(12)H(8))(3-n)[(OCH(2))(2)C(2)B(10)H(10)](n)] (n=1 (5) or 2 (6), respectively), without signs of intra- or intermolecularly bridged species. Upon treatment with NEt(3) in acetone, compound 5 was converted into the corresponding nido-carboranylphosphazene. However, the reaction of gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5) with NEt(3) in ethanol instead of acetone proceeded in a different manner to give the new compound (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7). For compounds with two 2,2'-dioxybiphenyl units, gem-[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(10)H(10)]] (5), (NHEt(3))[N(3)P(3)(O(2)C(12)H(8))(2)[(OCH(2))(2)C(2)B(9)H(10)]] (8), and (NHEt(3))(2)[N(3)P(3)(O(2)C(12)H(8))(2)(O)[OCH(2)C(2)B(9)H(10)CH(2)OCH(2)CH(3)]] (7), a mixture of different stereoisomers may be expected. However, for 5 and 7 only the meso compounds seem to be formed, with the same (R,S)-configuration as in the precursor [N(3)P(3)Cl(2)(O(2)C(12)H(8))(2)]. The reaction of 5 to give 8 seems to proceed with a change of configuration at one phosphorus center, giving a racemic mixture. The crystal structures of the nido-carboranylphosphazenes 7 and 8 have been confirmed by X-ray diffraction methods.     

Controlled assembly of ruthenium complexes through ortho-carborane dithiolate and polysulfide ligands

Treatment of ortho-carborane, n-butyl lithium, sulfur, and [(p-cymene)RuCl(2)](2) in varying ratio led to four new compounds (p-cymene)Ru[S(3)(C(2)B(10)H(10))(2)] (3), [(p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10))](2) (4), [(p-cymene)Ru](2)Ru(μ(2)-η(2):η(2)-S(2)) (μ(2)-η(2):η(1)-S(2)Cl)(μ(2)-S(2)C(2)B(10)H(10))(2) (5), and [(p-cymene)Ru](2)Ru(μ(2)-η(1):η(1)-S(2))(μ(3)-η(2):η(2)-S(4)) (μ(2)-S(2)C(2)B(10)H(10))(2) (6), respectively. In 3, the ruthenium atom is coordinated by three S atoms from a in situ generated tridentate [S(3)(C(2)B(10)H(10))(2)](2-) ligand. 4 consists of two identical dinuclear (p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10)) subunits which connect to each other via the Ru-Ru bond and two bridging o-carborane-1,2-dithiolate ligands. In 4, a Ru-B bond is present. 5 contains a Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(2)-S(2)Cl) core, and the central ruthenium atom is coordinated by seven S atoms in a distorted pentagonal bipyramidal geometry. In 5, a S-Cl bond is generated. 6 has a novel Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(3)-S(4)) core, and the three ruthenium atoms are connected through the two terminal sulfur atoms of the S-S-S-S chain in a μ(3) binding fashion. All the four complexes have been characterized by elemental analysis, mass, NMR, and X-ray crystallography.     

Synthesis of phthalide derivatives using nickel-catalyzed cyclization of o-haloesters with aldehydes

The reaction of o-bromobenzoate (1 b) with benzaldehyde (2 a) in the presence of [NiBr(2)(dppe)] (dppe=1,2-bis(diphenylphosphino)ethane) and zinc powder in THF (24 hours, reflux temperature), afforded 3-phenyl-3H-isobenzofuran-1-one (3 a) in an 86 % yield. Similarly, o-iodobenzoate reacts with 2 a to give 3 a, but in a lower yield (50 %). A series of substituted aromatic and aliphatic aldehydes (2 b, 4-MeC(6)H(4)CHO; 2 c, 4-MeOC(6)H(4)CHO; 2 d, 3-MeOC(6)H(4)CHO; 2 e, 2-MeOC(6)H(4)CHO; 2 f, 4-CNC(6)H(4)CHO; 2 g, 4-(Me)(3)CC(6)H(4)CHO; 2 h, 4-C(6)H(5)C(6)H(4)CHO; 2 i, 4-ClC(6)H(4)CHO; 2 j, 4-CF(3)C(6)H(4)CHO; 2 k, CH(3)(CH(2))(5)CHO; 2 l, CH(3)(CH(2))(2)CHO) also underwent cyclization with o-bromobenzoate (1 b) producing the corresponding phthalide derivatives in moderate to excellent yields and with high chemoselectivity. Like 1 b, methyl 2-bromo-4,5-dimethoxybenzoate (1 c) reacts with tolualdehyde (2 b) to give the corresponding substituted phthalide 3 m in a 71 % yield. The methodology can be further applied to the synthesis of six-membered lactones. The reaction of methyl 2-(2-bromophenyl)acetate (1 d) with benzaldehyde under similar reaction conditions afforded six-membered lactone 3 o in a 68 % yield. A possible catalytic mechanism for this cyclization is also proposed.     

普钙-脲-水复合肥料体系的等温溶度研究

从发展复合肥料出发,研究了ＣａＳＯ－Ｃａ（Ｈ２ＰＯ４）２Ｈ２Ｏ体系及其三元边界体系Ｃａ（Ｈ２ＰＯ４）２－ＣＯ（ＮＨ２）２－Ｈ２Ｏｄ ２５℃时的等温溶度,三元体系中形成一个新化合物Ｃａ（Ｈ２ＰＯ４）２。ＣＯ（ＮＨ２）２。四元体系溶 度图可以指导商品普钙磷肥转化为含各合复肥。     

Side-on bridging coordination of N2: spectroscopic characterization of the planar Zr2N2 core and theoretical investigation of its butterfly distortion

The vibrational and electronic structure of the side-on N(2)-bridged Zr complex [((P(2)N(2))Zr)(2)(mu-eta(2):eta(2)-N(2))] (P(2)N(2)=PhP(CH(2)SiMe(2)NSiMe(2)CH(2))(2)PPh) were analyzed. The vibrational characterization of the planar Zr(2)N(2) core was based on resonance Raman and infrared spectroscopy. In the Raman spectrum, the Nbond;N stretching band is found at 775 cm(-1) with an isotope shift of 22 cm(-1). Due to its appearance in many overtones and combination modes, the metal-metal stretch is assigned to the peak at 295 cm(-1). The two ungerade modes of the Zr(2)N(2) core were identified in the infrared spectrum. Based on these four vibrations of the Zr(2)N(2) unit, a quantum chemical assisted normal coordinate analysis (QCA-NCA) was performed. The force constants for the N--N and Zr--N bonds were calculated to be 1.53 and 2.58 mdyn A(-1), respectively. The butterfly distortion of the Zr(2)N(2) unit obtained in DFT geometry optimizations of planar side-on N(2)-bridged Zr complexes was analyzed in more detail. It was found that on bending of the Zr(2)N(2) core, the lone pairs of the axial amide ligands are rotated by 90 degrees. The bent Zr(2)N(2) unit is 11 kcal mol(-1) lower in energy than the planar core due to a more uniform distribution of electron density between the metal atoms and N(2) and delocalization of electron density from the amide ligands to the Zr(2)N(2) unit. The spectroscopic implications of this distortion are analyzed.     

Topography of the potential energy hypersurface and criteria for fast-ion conduction in perovskite-related A2B2O5 oxides

We discuss the importance of the topography of the potential energy hypersurface for the ionic conductivity of perovskite-related A(2)B(2)O(5) oxides. A correlation between the energetic preference of the cations for different coordination geometries and the ionic conductivity is proposed based on a first principles periodic density functional theory study of selected possible structures for Ba(2)In(2)O(5), Sr(2)Fe(2)O(5), Sr(2)Mn(2)O(5), and La(2)Ni(2)O(5). There are a large number of low-energy local minima on the potential energy hypersurfaces of the two first compounds due to an energetic preference for BO(4) tetrahedra. Tetrahedral environments are energetically unfavorable for Mn(III) in Sr(2)Mn(2)O(5) and for Ni(II) in La(2)Ni(2)O(5), and the number of low-energy configurations is relatively low in these two cases. Consistent with our findings, in contrast to Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5), Sr(2)Mn(2)O(5) and La(2)Ni(2)O(5) do not exhibit transitions to disordered phases on heating, and there appear to be no reports of enhanced ionic conductivity for these compounds. Thus we suggest that the possibility of many different oxygen orderings associated with a variety of low-energy connectivity schemes within tetrahedral layers such as in the brownmillerite-based structures of Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5) is a prerequisite for high ionic conductivity in perovskite-related A(2)B(2)O(5) oxides.     

Solubilizing sodium fluoride in acetonitrile: synthesis, molecular structure, and complexation behavior of bis(organostannyl)methyl-substituted crown ethers

The synthesis of the crown-ether-substituted bis(organostannyl)methanes Ph(3)SnCH(2)Sn(Ph(2))-CH(2)-[16]crown-5 (1) and Ph(2)ISnCH(2)Sn(I)(Ph)-CH(2)-[16]crown-5 (2) is reported. Both compounds have been characterized by elemental analyses, (1)H, (13)C, (19)F, and (119)Sn NMR spectroscopy, and in the case of compound 2 also by electrospray ionization mass spectrometry. Single-crystal X-ray diffraction analysis revealed for the aqua complex 2.H(2)O trigonal-bipyramidal-configured tin atoms with intramolecular Sn(1)-O(1) and Sn(2)-O(1W) distances of 2.555(2) and 2.440(3) A, respectively. The water molecule is trapped in a sandwich-like fashion between the crown ether oxygen atoms O(2) and O(4) and the Sn(2) atom. NMR spectroscopy unambiguously proved the ability of compound 2 in acetonitrile to overcome the high lattice energy of sodium fluoride and to complex the latter under charge separation.     

超临界二氧化碳中卟啉与钴(II)、镍(II)、锌(II)配合物反应动力学

用紫外-可见光谱研究了钴(II)、镍(II)、锌(II)的1, 1, 1, 5, 5, 5-六氟-2, 4-戊二酮-二水配合物[M(hfac)2(H₂O)₂, M=Co、Ni、Zn]与5, 10, 15, 20-四(五氟苯基)卟啉[H2tpfpp]在超临界二氧化碳中反应生成金属卟啉[M(tpfpp)]的反应动力学. 在金属配合物大大过量时, 反应对卟啉为一级. 其表观一级速率常数随钴(II)、镍(II)配合物的浓度增加先增加、而后趋于稳定, 而表观一级速率常数随锌(II)配合物的浓度增加线形增加. 根据实验事实, 讨论了反应的机理, 得到了相应的热力学和动力学参数.     

Reactivity of bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin with CO(2), OCS, and CS(2) and comparison to that of bis[bis(trimethylsilyl)amido]tin

The heterocumulenes carbon dioxide (CO(2)), carbonyl sulfide (OCS), and carbon disulfide (CS(2)) were treated with bis(2,2,5,5-tetramethyl-2,5-disila-1-azacyclopent-1-yl)tin {[(CH(2))Me(2)Si](2)N}(2)Sn, an analogue of the well-studied bis[bis(trimethylsilyl)amido]tin species [(Me(3)Si)(2)N](2)Sn, to yield an unexpectedly diverse product slate. Reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CO(2) resulted in the formation of 2,2,5,5-tetramethyl-2,5-disila-1-oxacyclopentane, along with Sn(4)(μ(4)-O){μ(2)-O(2)CN[SiMe(2)(CH(2))(2)]}(4)(μ(2)-N═C═O)(2) as the primary organometallic Sn-containing product. The reaction of {[(CH(2))Me(2)Si](2)N}(2)Sn with CS(2) led to formal reduction of CS(2) to [CS(2)](2-), yielding [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn, in which the [CS(2)](2-) is coordinated through C and S to two tin centers. The product [{[(CH(2))Me(2)Si](2)N}(2)Sn](2)CS(2){[(CH(2))Me(2)Si](2)N}(2)Sn also contains a novel 4-membered Sn-Sn-C-S ring, and exhibits a further bonding interaction through sulfur to a third Sn atom. Reaction of OCS with {[(CH(2))Me(2)Si](2)N}(2)Sn resulted in an insoluble polymeric material. In a comparison reaction, [(Me(3)Si)(2)N](2)Sn was treated with OCS to yield Sn(4)(μ(4)-O)(μ(2)-OSiMe(3))(5)(η(1)-N═C═S). A combination of NMR and IR spectroscopy, mass spectrometry, and single crystal X-ray diffraction were used to characterize the products of each reaction. The oxygen atoms in the final products come from the facile cleavage of either CO(2) or OCS, depending on the reacting carbon dichalogenide.