Hydrogen Bonds Dictate the Coordination Geometry of Copper: Characterization of a Square‐Planar Copper(I) Complex

6,6′′‐Bis(2,4,6‐trimethylanilido)terpyridine (H₂Tpy^NMes) was prepared as a rigid, tridentate pincer ligand containing pendent anilines as hydrogen bond donor groups in the secondary coordination sphere. The coordination geometry of (H₂Tpy^NMes)copper(I)‐halide (Cl, Br and I) complexes is dictated by the strength of the NH–halide hydrogen bond. The Cu^ICl and Cu^IICl complexes are nearly isostructural, the former presenting a highly unusual square‐planar geometry about Cu^I. The geometric constraints provided by secondary interactions are reminiscent of blue copper proteins where a constrained geometry, or entatic state, allows for extremely rapid Cu^I/Cu^II electron‐transfer self‐exchange rates. Cu(H₂Tpy^NMes)Cl shows similar fast electron transfer (≈10⁵ m ^?1 s^?1) which is the same order of magnitude as biological systems.     

A Direct Synthesis of Vinylic Phosphonates from Vinylic Halides

Approaches to the formation of vinylic phosphonates through direct replacement of a vinylic halide by phosphorus have received considerable attention. With the exception of α,β-unsaturated systems^1,2 attempts involving simple Michaelis-Arbuzov reaction conditions (heating, trivalent phosphorus ester) have failed.^3–5 Other efforts involving transition metal salts as catalysts have found greater, but still quite limited success.^6–8     

Surface enhanced Raman spectra of benzotriazole adsorbed on a copper electrode

The surface enhanced Raman spectrum of benzotriazole (BTAH) adsorbed on a copper electrode has been studied as a function of the potential applied to the electrode. The effect of pH and of the type of halide in the electrolyte solution has also been investigated. The presence of some complexes involving Cu(I), benzotriazole or benzotriazolate (BTA^-) and the halide has been characterized. The protective film formed on copper surface, in the presence of benzotriazole, has been identified as cuprous benzotriazolate [Cu(I)BTA].     

Dinuclear copper(I) complexes of N-methylbenzothiazole-2-thione: synthesis,structures, antibacterial activity and DNA interaction

Three copper(I) halide complexes containing N-methylbenzothiazole-2-thione (mbtt) and triphenylphosphine (PPh₃) have been prepared and structurally characterized by X-ray single-crystal analysis. Copper(I) halide precursors [CuΧ(PPh₃)]₄ (X = Cl, Br, I) react with mbtt in 1 : 4 M ratio to give complexes of formula [CuΧ(mbtt)(PPh₃)]₂. Hereby, dimerization is achieved in case of copper(I) chloride and bromide via halide bridges, while copper(I) iodide gives the binuclear thione-S-bridged dimer. The new complexes show moderate in vitro antibacterial activity against certain bacterial strains. The interaction of the compounds with calf-thymus DNA was monitored via UV–vis spectroscopy, DNA-viscosity measurements and their competition with ethidium bromide for the DNA intercalation sites studied by fluorescence emission spectroscopy. Intercalation was revealed as the probable mode of binding.     

Structural motifs of Au(I)-Cu(I) N-heterocyclic carbene halide complexes

A series of Au(I)–Cu(I) N-heterocyclic carbene (NHC) halide complexes [AuCu₂(im(CH₂py)₂)₂X]²⁺ where X?=?Cl (1), Br (2), I (3) was prepared by refluxing [AuCu₂(im(CH₂py)₂)₂(NCCH₃)₄]³⁺ with the appropriate halide in acetonitrile. The compounds were characterized by NMR, absorption, and fluorescence spectroscopy. They feature similar solution behavior and solid-state photoemissions. The solid-state structures feature a rhomboidal [AuCu₂X]²⁺ core which is influenced by the type of halide. Compared to other Au(I)–Cu(I) NHC complexes, 1–3 comprise a new structural motif containing a bridging halide. The benzimidazolium analog of 1 was also characterized crystallographically. The structure of [AuCu₂(benzim(CH₂py)₂)₂Cl]²⁺(4) features different coordination modes of the NHC ligands with the carbenic carbon bonded to both gold and copper and the pyridyl groups bonded to the same copper(I) ion.     

Der austausch des cyclopentadienylliganden im methylcyclopentadienyl-mangantricarbonyl : Darstellung und zusammensetzung der komplexe mit methyl-substituierten benzolen

The exchange of the cyclopentadienyl ring in methylcyclopentadienylmanganese(I) tricarbonyl by methy-substituted benzenes in the presence of aluminium halide leads to [arene-Mn(CO)₃]⁺-ions. The reaction conditions have been optimised; in addition to the yield the purity of the complexes has been determined in some detail. After mild decomposition the arenes were analysed by GLC. Pure [arene-Mn(CO)₃]⁺-ions can be isolated with benzene, toluene, m- and o-xylene.     

Synthesis and Characterization of Copper(I) Complexes Containing Tri(2‐Pyridylmethyl)Amine Ligand

Reaction of copper halides CuX (X=Cl, Br, I) with tri(2‐pyridylmethyl)amine) (TPMA) in THF under N₂ affords a series of monomeric copper(I) complexes CuX(TPMA) (X=Cl ( 1 ), Br ( 2 ) and I ( 3 )). Treatment of [CuCl(TPMA)] ( 1 ) with 0.5 equivalent of 1,4‐diisocyanobenzene following by equimolar amount of NaBF₄ affords a novel binuclear complex [(TPMA)Cu(μ‐1,4‐CNC₆H₄NC)Cu(TPMA)](BF₄)₂ ( 4 ). The copper(I) halide TPMA complexes show interesting fluxional behaviors in temperature dependence in the ¹H NMR spectrum that can be explained by the dissociation and reassociation of the pyridyl group and alkylamine nitrogen of TPMA ligand. The crystal structures of 1 , 3 and 4 are determined by an X‐ray diffractometer. Complexes 1 and 3 are distorted tetrahedral coordinates with strong bonding between three pyridyl N atoms and the corresponding halide donor. Crystallographic results of 4 clearly indicates two Cu(I) ions are bridged by 1,4‐diisocyanobenzene, forming a centro‐symmetrical homobinuclear complex with a “dangling” uncoordinated pyridyl group.     

Far infrared spectroscopy of complexes of copper(I) halides with phosphine and amine ligands

Far i.r. spectra are reported for 34 adducts of phosphine and amine bases with copper (I) halides in which the copper atom is coordinated to only one terminal halide. CuX stretching frequencies are assigned for all of the chloro complexes and for most of the bromo and iodo complexes. The CuX stretching frequencies have been found to depend primarily on the CuX̵ bond length, and appear to be relatively independent of the nature of the coordinating ligands. Best fit curves to the experimental data correspond to a dependence of ν(CuX) on the inverse nth power of r(CuX), where n is approximately equal to 5. Metal—halogen bond stretching force constants have been calculated for copper(I) and related silver(I) and gold(I) halide complexes assuming that the MX entity behaves as an uncoupled diatomic molecule. The results show that for three-coordinate copper(I) the force constants decrease in the order CuCl>CuBr>CuI and that the same trend is shown for four-coordinate copper(I) complexes, but the differences are considerably smaller than for the three-coordinate case. Analogous trends are found for the two- and three-coordinate gold compounds.     

Rhodium(II)‐ or Copper(I)‐Catalyzed Formal Intramolecular Carbene Insertion into Vinylic C(sp2)−H Bonds: Access to Substituted 1H‐Indenes

A rhodium(II)‐ or copper(I)‐catalyzed formal intramolecular carbene insertion into vinylic C(sp²)−H bonds is reported herein. This method provides straightforward access to 1H ‐indenes with high efficiency and excellent functional‐group compatibility. Mechanistically, the reaction is proposed to involve the following sequence: metal carbene formation, intramolecular nucleophilic addition of the double bond to the electron‐deficient carbene carbon atom, dearomatization, and finally a 1,5‐H shift.     

Synthesis,characterization and crystal structures of dinuclear macrocyclic Schiff base copper(I) complexes bearing different bridges

Utilizing a new 20-membered macrocyclic Schiff base ligand with two coordination sites formed from the [2+2] condensation of 1,3-diaminopropane and benzene-1,3-dicarboxaldehyde in the presence of CuX (X = Cl⁻, Br⁻, I⁻) salts, air-stable dicopper(I) complexes were synthesized in acetonitrile, intramolecularly linked via two halide groups, and characterized by different physico-chemical techniques. The single crystal X-ray diffraction technique indicates these complexes consist of two N₂X₂ donor sets that have distorted tetrahedral coordination environments around the copper(I) ions. In these halogen-bridged binuclear Cu₂LX₂ systems the Cu?Cu separation can be controlled, as this distance is reduced on increasing the halide size and hence the X?X repulsion, with the rigidity of the macrocycle playing a significant role.     

The effect of sodium cation concentration on the electrochemical reduction of copper(I) thiosulfate complexes

The electrochemical behavior of copper(I) thiosulfate complexes from aqueous solutions containing different amounts of sodium perchlorate NaClO₄ is studied by the methods of hydrodynamic voltammetry and potentiometry with a Na⁺-selective electrode. The electrochemical reaction orders p with respect to Na⁺ cations are determined from the dependences of exchange currents and direct reaction currents at fixed potential on the equilibrium concentration of Na⁺ cations. The reaction order p is close to 1 in the Na⁺ concentration range of 0.06–0.12 M and drops to zero for $c_{Na^ + } $ > 0.12 M. The ion pair (IP) {Na[Cu(S₂O₃)₂]}_2? the formation of which precedes the electron transfer reaction is the electrochemically active species for the reduction of copper(I) thiosulfate complexes. The stability constant of IP is determined (K = 27.0 ± 2.4) as well as the rate constants of IP formation and decomposition.     

Poly[μ2‐chloro‐μ2‐1,4‐oxathiane‐κ2S:S‐copper(I)]

The title complex, [CuCl(C₄H₈OS)]_n, contains infinite spiral (CuS)_n chains linked by bridging Cl atoms into layers. The Cl atoms do not form polymeric fragments with Cu^I, but combine into isolated centrosymmetric Cu₂Cl₂ units. The compound is non‐isomorphous with the Br‐containing analogue, which contains Cu₈S₈ rings linked by Br atoms into chains. The O atom of the 1,4‐oxathiane mol­ecule does not realize its coordination abilities in the known copper(I)–halide complexes, while in copper(II)–halide complexes, oxathiane is coordinated via the S and O atoms. This falls into a pattern of the preferred inter­actions, viz. weak acid (Cu^I atom) with weak base (S atom) and harder acid (Cu^II atom) with harder base (O atom).     

Zur Reaktion der Alkin-Kupfer(I)-Komplexe [CuX(S-Alkin)] (X = Cl,Br, I; S-Alkin = 3,3,6,6-Tetramethyl-1-thia-4-cycloheptin) mit dem Chelat-Liganden N,N,N′,N′-Tetramethylethylendiamin (tmeda)

Organometallic Compounds of Copper. XVII. On the Reaction of the Alkyne-Copper(I) Complexes [CuX(S-Alkyne)] (X = Cl, Br, I; S-Alkyne = 3,3,6,6-Tetramethyl-1-thiacyclohept-4-yne) with the Chelate Ligand N,N,N′,N′-Tetramethylethylendiamine (tmeda) The alkyne copper(I) chloride complex [CuCl(S-Alkyne)]_n ( 2 a ) (S-Alkyne = 3,3,6,6–tetramethyl-1-thiacyclohept-4-yne) adds tetramethylethylene diamine (tmeda) to form the mononuclear compound [CuCl(S-Alkyne)(tmeda)] ( 4 ). The alkyne copper halide complexes [CuBr(S-Alkyne)]_n ( 2 b ) and [CuI(S-Alkyne)]_n ( 2 c ) react with tmeda to yield the complex salts [Cu(S-Alkyne)(tmeda)]⁺ [CuX₂(S-Alkyne)]^– (X = Br ( 5 a ), X = I ( 5 b )). X-ray diffraction studies on all new compounds 4 and 5 reveal distorted tetrahedral coordination of the copper atom in complex 4 and trigonal-planar coordinated copper atoms in the cations and anions of the ionic compounds 5 .     

Effects of stereochemistry and β-substituents on the rates of vinylic SN2 reaction of hypervalent vinyl(phenyl)-λ-iodanes with tetrabutylammonium halides

Both stereoisomers of β-(2-phenylethoxy)vinyl-λ³-iodane and (Z)-β-aroyloxyvinyl-λ³-iodane were prepared stereoselectively. These substituted vinyl-λ³-iodanes undergo nucleophilic vinylic substitutions with n-Bu₄NX (X=Cl, Br, I) under mild conditions, yielding vinyl halides. The observed inversion of configuration at the ipso vinylic carbon atom is compatible with a concerted vinylic S_N2 mechanism. Kinetic measurements indicated that the rates for vinylic S_N2 reaction of (Z)-vinyl-λ³-iodane are greater than those of the E-isomer, probably because of the higher ground state energy of the Z-isomer. Electronic effects of β-substituents of vinyl-λ³-iodanes in the vinylic S_N2 reaction are also discussed.     

Cyclic voltammetric studies of copper(II) dipeptide complexes. Evidence for copper(I) dipeptide complexes in aqueous media

The reduction of the title complexes was studied by cyclic voltammetry in aqueous media. It proceeds through a one-electron process generating intermediate copper(I) dipeptide complexes. The copper(I) dipeptide complexes are found to be short-lived and undergo transformations eventually generating Cu⁰ at the mercury electrode. The unchanged fraction of the copper(I) species is re-oxidised to the copper(II) complexes. The Cu⁰ generated undergoes a two-electron oxidation at a more anodic potential than the copper(I) complexes. pH-dependence of the title complexes is also investigated by cyclic voltammetry.     

Cationic Copper(I) Complexes as Highly Efficient Catalysts for Single and Double A3‐Coupling Mannich Reactions of Terminal Alkynes: Mechanistic Insights and Comparative Studies with Analogous Gold(I) Complexes

Cationic Cu?L complexes (L=Buchwald‐type phosphane) with N co‐ligands have been characterised by structural and spectroscopic properties. These copper(I) complexes are extremely active catalysts, far more active than analogous gold(I) complexes, to promote the single and double A³ coupling of terminal alkynes, pyrrolidine and formaldehyde. The activity data show the possible ways in which the solvent can influence the catalytic performance by limiting complex solubility, by solvent decomposition or instability of the copper(I) redox state. Isolation of copper(I) complexes that are likely to be the key catalytic species has allowed light to be shed on the reaction mechanism.     

Synthesis,Characterisation and Reactivity of Copper(I) Amide Complexes and Studies on Their Role in the Modified Ullmann Amination Reaction

A series of copper(I) alkylamide complexes have been synthesised; copper(I) dicyclohexylamide ( 1 ), copper(I) 2,2,6,6‐tetramethylpiperidide ( 2 ), copper(I) pyrrolidide ( 3 ), copper(I) piperidide ( 4 ), and copper(I) benzylamide ( 5 ). Their solid‐state structures and structures in [D₆]benzene solution are characterised, with the aggregation state in solution determined by a combination of DOSY NMR spectroscopy and DFT calculations. Complexes 1 , 2 and 4 are shown to exist as tetramers in the solid state by X‐ray crystallography. In [D₆]benzene solution, complexes 1 , 2 and 5 were found by using ¹H DOSY NMR to exist in rapid equilibrium between aggregates with average aggregation numbers of 2.5, 2.4 and 3.3, respectively, at 0.05 M concentration. Conversely, distinct trimeric, tetrameric and pentameric forms of 3 and 4 were distinguishable by one‐dimensional ¹H and ¹H DOSY NMR spectroscopy. Complexes 3 – 5 are found to react stoichiometrically with iodobenzene, in the presence or absence of 1,10‐phenanthroline as an ancillary ligand, to give arylamine products indicative of their role as potential intermediates in the modified Ullmann reaction. The role of phenanthroline has also been explored both in the stoichiometric reaction and in the catalytic Ullmann protocol.     

Copper(I) complexes from copper(II) halides and 1,3-thiazohdine-2-thione

Summary Reaction of 1,3-thiazolidine-2-thione and copper(II) chloride and bromide in MeOH yields CuL₃X complexes. These react with an excess of copper(II) halide to give CuL₂X complexes. From their i.r. spectra, all the complexes seem to be S-bonded to the metal. Thev(CuCl) vibration is identified at 236 cm^–1.     

Oxidative addition of aryl halides to iridium(I) complexes. A new arylation reagent

Oxidative addition of aryl halides, ArX, to chlorocarbonylbis(triphenylphos-phine)iridium(I) yields iridium(III) aryl complexes, IrCl(X)(Ar)(CO)(PPh₃)₂. The reactivity of the aryl halide decreases in the order I > Br > C1, and electron-withdrawing substituents in the aryl ring accelerate the reaction. The Ir^III compounds may be utilised as arylating agents.     

Copper(I) coordination polymers [{Cu(mu-X)}2{RP(mu-NtBu)}2]n (R = OC6H4OMe-o; X = Cl, Br, and I) and their reversible conversion into mononuclear complexes [CuX{(RP(mu-NtBu)2}2]: synthesis and structural characterization

The reactions of cyclodiphosphazane cis-[tBuNP(OC6H4OMe-o)]2 (1) with 2 equiv of CuX in acetonitrile afforded one-dimensional Cu(I) coordination polymers [Cu2X2{tBuNP(OC6H4OMe-o)}2]n (2, X = Cl; 3, X = Br; 4, X = I). The crystal structures of 2 and 4 reveal a zigzag arrangement of [P(mu-N)(2)P] and [Cu(mu-X)(2)Cu] units in an alternating manner to form one-dimensional Cu(I) coordination polymers. The reaction between 1 and CuX in a 2:1 ratio afforded mononuclear tricoordinated copper(I) complexes of the type [CuX{(tBuNP(OC6H4OMe-o))2}2] (5, X = Cl; 6, X = Br; 7, X = I). The single-crystal structures were established for the mononuclear copper(I) complexes 5 and 6. When the reactant ratios are 1:1, the formation of a mixture of polymeric and mononuclear products was observed. The Cu(I) polymers (2-4) were converted into the mononuclear complexes (5-7) by reacting with 3 equiv of 1 in dimethyl sulfoxide. Similarly, the mononuclear complexes (5-7) were converted into the corresponding polymeric complexes (2-4) by reacting with 3 equiv of copper(I) halide under mild reaction conditions.