Cadmium Tellurium Quantum Dots in Sol-Gel-Derived Silica Spheres Coated with Calix[6]Arene as an Optical Probe for Dalapon

This paper reports a new optical probe for detect dalapon. We have synthesized the luminescent and stable CdTe quantum dots(QDs) capped with calix[6]arene(C[6]/SiO₂/CdTe) via the sol-gel technique in aqueous media. These hybrid organic-inorganic compounds are characterized by IR spectroscopy, ultraviolet-visible spectroscopy (UV-vis), transmission electron microscopy (TEM), and fluorescence. We found that the C[6]/SiO₂/CdTe were more stable and had higher fluorescence than the SiO₂/CdTe nanoparticles (NPs). The C[6]/SiO₂/CdTe show selectivity and sensitivity to dalapon via significant fluorescence intensity decrease. It can be ascribed to the Stern-Volmer equation. Under the optimal conditions, the relative fluorescent intensity was decreased linearly with increasing dalapon concentration in the range of 1.0–25.0 nmol/L with a detection limit of 0.262 nmol/L of dalapon. The possible underlying mechanism is discussed by Langmuir binding isotherm.     

Solvent effect on complexation reactions

The inclusion complexation of aromatic amines with cucurbit[6]uril (CB[6]) capped with alkali metal cations was studied spectrophotometrically. We showed that CB[6] capped with alkali metal cations forms a 1:1 inclusion complex with the aromatic amine guests (neutral organic molecules), independent of the length of guest molecules. The effects of salts on the inclusion constants of CB[6] in the presence of different alkali salts were examined and it was found that the inclusion constants increased in the order of alkali cation Cs⁺ < Na⁺ < K⁺, suggesting the interaction of amine guests with the capped alkali metal cation. Further, the structures of the inclusion complexation of aromatic amines with CB[6] were characterized by ¹H NMR measurements. Based on the results, the inclusion abilities of CB[6] capped with alkali metal cations are discussed.     

Calix[4]arene‐Functionalised Silver Nanoparticles as Hosts for Pyridinium‐Loaded Gold Nanoparticles as Guests

A series of lipophilic gold nanoparticles (AuNPs) circa 5 nm in diameter and having a mixed organic layer consisting of 1‐dodecanethiol and 1‐(11‐mercaptoundecyl) pyridinium bromide was synthesised by reacting tetraoctylammonium bromide stabilised AuNPs in toluene with different mixtures of the two thiolate ligands. A bidentate ω‐alkylthiolate calix[4]arene derivative was instead used as a functional protecting layer on AgNPs of approximately 3 nm. The functionalised nanoparticles were characterised by transmission electron microscopy (TEM), and by UV/Vis and X‐ray photoelectron spectroscopy (XPS). Recognition of the pyridinium moieties loaded on the AuNPs by the calix[4]arene units immobilised on the AgNPs was demonstrated in solution of weakly polar solvents by UV/Vis titrations and DLS measurements. The extent of Au‐AgNPs aggregation, shown through the low‐energy shift of their surface plasmon bands (SPB), was strongly dependent on the loading of the pyridinium moieties present in the organic layer of the AuNPs. Extensive aggregation between dodecanethiol‐capped AuNPs and the Ag calix[4]arene‐functionalised NPs was also promoted by the action of a simple N‐octyl pyridinium difunctional supramolecular linker. This linker can interdigitate through its long fatty tail in the organic layer of the dodecanethiol‐capped AuNPs, and simultaneously interact through its pyridinium moiety with the calix[4]arene units at the surface of the modified AgNPs.     

Synthesis of Calix

The formation of p-tert-butylcalix[4]arene mono-, bis-, tris-, and tetrakistriflates 3, 2, 4, and 5, respectively, and their respective reactions, under typical Pd-catalyzed carbonylative, Suzuki-Miyaura coupling, or deoxygenation conditions are described. A novel, nonsolvent-derived 1:1 clathrate (6) of benzophenone and 3 was formed from the palladium-catalyzed carbonylative reaction of phenylboronic acid and 2. The X-ray crystal structure of this first nonsolvent-derived clathrate of a calix[4]arene derivative is reported. Another 1:1 clathrate of triethylamine and 3 was formed during the attempted Pd-catalyzed deoxygenation of 2.     

Bridged Calix[6]arenes

Bridging including capping of calix[6]arene is not only an importantroute to synthesize new host molecules, but also an efficient route to reduce the mobility of conformationof calix[6]arene. This article reviews the syntheses, conformations and complexation behavior of this kindof host molecules.     

Calix[4]azacrowns as novel molecular scaffolds for the generation of visible and near-infrared lanthanide luminescence

Two calix[4]azacrowns, capped with two aminopolyamide bridges, were used as ligands for the complexation of lanthanide ions [Eu(III), Tb(III), Nd(III), Er(III), La(III)]. The formation of 1:2 and 1:1 complexes was observed, and stability constants, determined by UV absorption and fluorescence spectroscopy, were found to be generally on the order of log beta(11) approximately 5-6 and log beta(12) approximately 10. The structural changes of the ligands upon La(III) complexation were probed by 1H NMR spectroscopy. The two ligands were observed to have opposite fluorescence behaviors, namely, fluorescence enhancement (via blocking of photoinduced electron transfer from amine groups) or quenching (via lanthanide-chromophore interactions) upon metal ion complexation. Long-lived lanthanide luminescence was sensitized by excitation in the pi,pi band of the aromatic moieties of the ligands. The direct involvement of the antenna triplet state was demonstrated via quenching of the ligand phosphorescence by Tb(III). Generally, Eu(III) luminescence was weak (Phi(lum) 相似文献   

Calix Crowns Derived from para-Bridged Calix

Two calix[4]arenes, bridged by aliphatic chains of five and eight carbon atoms spanning two opposite para positions, have been converted into their 1,3-crown ether derivatives by reaction with tetraethylene and pentaethylene glycol ditosylates. Of the two possible 1,3-crown derivatives, only the formation of those isomers is observed in which the phenolic units connected at the para positions are etherified. This has been established in one case by a single-crystal X-ray analysis. Preliminary results for the extraction of selected alkali and alkaline-earth metals are reported.     

Calix

Chiral calix[4]arene derivatives with four O-(N-acetyl-PhgOMe), (1), (Phg denotes R-phenylglycine), or O-(N-acetyl-LeuOMe) (2) strands have been synthesised. Both compounds exist in chloroform in stable cone conformations with a noncovalently organised cavity at the lower rim that is formed by circular interstrand amidic hydrogen bonds. Such organisation affects both the selectivity and extraction/transport properties of 1 and 2 toward metal cations. Calix[4]arene derivatives with one OCH2COPhgOMe strand (3), two OCH2COPhgOMe strands (5) and with 1,3-OMe-2,4-(O-CH2COPhgOMe) substituents (4) at the lower rim have also been prepared. For 3, a conformation stabilised by a circular hydrogen-bond arrangement is found in chloroform, while 4 exists as a time-averaged C2 conformation with two intramolecular NH ...OCH3 hydrogen bonds. Compound 5 has a unique hydrogen-bonding motif in solution and in the solid state with two three-centred NH-.. O and two OH...O hydrogen bonds at the lower rim. This motif keeps 5 in the flattened cone conformation in chloroform. The X-ray structure analysis of 1 revealed a molecular structure with C2 symmetry; this structure is organised in infinite chains by intra- and intermolecular H bonds. The solid-state and solution structures of the [1-Na]ClO4 complex are identical, C4 symmetric cone conformations.     

Azobenzene Polyesters Used as Gate‐Like Scaffolds in Nanoscopic Hybrid Systems

The synthesis and characterisation of new capped silica mesoporous nanoparticles for on‐command delivery applications is reported. Functional capped hybrid systems consist of MCM‐41 nanoparticles functionalised on the external surface with polyesters bearing azobenzene derivatives and rhodamine B inside the mesopores. Two solid materials, Rh‐PAzo8‐S and Rh‐PAzo6‐S, containing two closely related polymers, PAzo8 and PAzo6, in the pore outlets have been prepared. Materials Rh‐PAzo8‐S and Rh‐PAzo6‐S showed an almost zero release in water due to steric hindrance imposed by the presence of anchored bulky polyesters, whereas a large delivery of the cargo was observed in the presence of an esterase enzyme due to the progressive hydrolysis of polyester chains. Moreover, nanoparticles Rh‐PAzo8‐S and Rh‐PAzo6‐S were used to study the controlled release of the dye in intracellular media. Nanoparticles were not toxic for HeLa cells and endocytosis‐mediated cell internalisation was confirmed by confocal microscopy. Furthermore, the possible use of capped materials as a drug‐delivery system was demonstrated by the preparation of a new mesoporous silica nanoparticle functionalised with PAzo6 and loaded with the cytotoxic drug camptothecin (CPT‐PAzo6‐S). Following cell internalisation and lysosome resident enzyme‐dependent gate opening, CPT‐PAzo6‐S induced CPT‐dependent cell death in HeLa cells.     

Regioselective Bridging Calix[6]arenes: Synthesis and X-ray Structure of Trisbridged Calix[6]arene

The preparation and characterization of gold nanoparticles (～6 nm in diameter) modified with mono-6-thio-β-cyclodextrin (II) is described. The resulting monolayer-protected gold nanoparticles are water-soluble and more stable. The concentration of II plays a crucial role for the distribution of the modified nanoparticles. When the ratio of concentration of II to HAuCl₄,[II]/[HAuCl₄] ≥ 0.93, a stable gold nanoparticle with uniform distribution and diameter of 6.0 ± 0.9 nm will be obtained. The recognition of modified gold nanoparticles to organic guest molecule is researched. The modified gold nanoparticles can make the electrochemical reduction current of nitrobenzene decrease and can be self-assembled in three-dimensional to form spherical clusters with ligand of methylene green.     

Single-crystal metal--organic microtubes self-assembled from designed D3 symmetrical nanoclusters with a capped triple-helix pentanuclear M5O6 core

Single-crystal metal-organic microtubular architectures have been fabricated from designed D(3) symmetrical nano clusters with a capped triple-helix pentanuclear M(5)O(6) core under hydrothermal conditions.     

Divide-and-conquer local correlation approach to the correlation energy of large molecules

A divide-and-conquer local correlation approach for correlation energy calculations on large molecules is proposed for any post-Hartree-Fock correlation method. The main idea of this approach is to decompose a large system into various fragments capped by their local environments. The total correlation energy of the whole system can be approximately obtained as the summation of correlation energies from all capped fragments, from which correlation energies from all adjacent caps are removed. This approach computationally achieves linear scaling even for medium-sized systems. Our test calculations for a wide range of molecules using the 6-31G or 6-31G( * *) basis set demonstrate that this simple approach recovers more than 99.0% of the conventional second-order Moller-Plesset perturbation theory and coupled cluster with single and double excitations correlation energies.     

Solvation of Calix[4]arene-bis-crown-6 Molecules

Single crystal X-ray diffraction analyses of calix[4]arene-bis-crown-6 (1) and calix[4]arene-bis-benzocrown-61,2-dichloroethane (2) are reported. Thesestructures offer an opportunity to study the conformation of calix[4]arene-bis-crown-6 molecules in the absence of solvent, and when very weakly solvated. These structures exhibit different conformations of the crown ring, and limited flexibility of the calix[4]arene,but do not show solvent or crown inclusion in the calix[4]arene cavity. Comparisons to similar structures are made, and the implications for cesium binding are discussed.     

One-Pot Method for Synthesis of Calix[6]biscrowns

p-tert-Butylcalix[6]-1,4-2,5-biscrown-4 is a typical member of the family of calix[6]crowns. In the literature, the compound was synthesized from calix[6]arene by two steps and the overall yield based on calix[6]arene was 24%.Herein we wish to report a one-pot method to do this work. By this method the yield was up to 48% and the reaction time was greatly reduced.     

N-Confused Calix

Next to the "normal" calix[4]pyrrole 1, the N-confused calix[4]pyrrole 2 is formed in substantial amounts (up to 22 % yield) as side product in the acid-catalyzed condensation reaction of ketones and pyrrole. In some cases, doubly N-confused calix[4]pyrroles are also formed.     

Selective Upper-Rim Adamantylation of Calix[4]arenes

Lower-rim mono- and diacylated calix[4]arenes [acyl = C₆H₅CO, 3,5-(NO₂)₂C₆H₃CO] undergo selective adamantylation with 3-Y-1-adamantanols (Y = H, i-Pr, 4-MeC₆H₄) in trifluoroacetic acid at the free phenolic fragments of the macroring. The reaction provides a convenient preparative route to di-, tri-, and tetraadamantylated calix[4]arenes.     

Chemical interactions between silver nanoparticles and thiols: a comparison of mercaptohexanol against cysteine

The interaction between citrate capped silver nanoparticles and two different thiols, mercaptohexanol(MH) and cysteine, was investigated. The thiols interacted with silver nanoparticles in a significantly contrasting manner. With MH, a sparingly soluble silver(I) thiolate complex AgSRm(Rm = –(CH2)6OH) was formed on the silver nanoparticle surface. Cyclic voltammograms and UV-vis spectra were used to infer that the AgSRm complex on the nanoparticle surface undergoes a phase transition to give a mixture of AgSRm and Ag2S-like complexes. In contrast, when silver nanoparticles were exposed to cysteine, the citrate capping agent on the silver nanoparticles was replaced by cysteine to give cysteine capped nanoparticles. As cysteine capped nanoparticles form, the electrochemical data displayed a decrease in oxidative peak charge but the UV-vis spectra showed a constant signal. Therefore, cysteine capped nanoparticles were suggested to have either inactivated the silver surface or else promoted detachment from the electrode surface.     

Preferred Conformations of Calix[4]- and Calix[6]arenes,Calculated ab initio

Ab initio STO-2G calculations showed that the preferred conformation of a series of calix[6]arenes substituted at the upper rim is a compressed cone stabilized by a pseudo-ring of six hydrogen bonds with close characteristics. The endocyclic dihedral angles between the benzene ring planes, characterizing the molecular shape of the above macrocyclic compounds in this conformation, were calculated. The calculation results are consistent with the conformational data obtained by other theoretical methods and describe the characteristics of hydrogen bonds more adequately, in agreement with the experimental data and with the existing concepts of the hydrogen bonding efficiency.     

Calix[4] crowns with Methoxynaphthoylmethyl Pendant Groups

The novel calix [4] crowns with two pendant groups were prepared by the alkylation of calix 141 crowns with 6-methoxy-2-bromoacetylnaphthalene. ^1H NMR titration and picrate extraction experiments indicated that they exhibit higher complexing efficiency than their parent compounds and possess obvious selectivity for Na^ or K^ , respetively, and that the cation is encapsulated inside the preorganized ionophoric cavity defined by carbonyl oxygens, the crown ether and the phenoxy oxygens.From UV and fluorescent spectra it is revealed that calix [4]crown-4 3a with 6-methoxy-2-naphthoylmethyl pedant groups exhibits remarkable cation-induced photophysical effects and it could be utilized as a selective fluorescent sensor for Ca^2 .