加速溶剂萃取-丙基化衍生-气相色谱质谱法测定土壤中的三甲基铅与三乙基铅

建立了加速溶剂萃取-丙基化衍生-气相色谱质谱联用分析土壤中的三甲基铅与三乙基铅的方法。不加任何填充物,温度为100℃,静态萃取时间5 min,循环次数为2次,冲洗体积为65%,吹扫时间90 s时得到最大的回收率;在此条件下,三甲基铅与三乙基铅的的回收率分别为92. 12%,90. 54%。三甲基铅与三乙基铅在0. 05～20 mg/L的范围内,具有良好的线性关系(r~2≥0. 999),其方法检出限分别为0. 02 mg/kg及0. 025 mg/kg。将该方法应用于真实样品的检测,样品加标回收率可达90%以上,相对标准偏差(RSD)小于6%。适用于土壤中三甲基铅与三乙基铅的分析。     

顶空固相微萃取-气相色谱质谱联用测定烷基铅的研究

建立了顶空固相微萃取(HS SPME)与气相色谱 质谱(GC/MS)联用测定水样中四甲基铅和四乙基铅的方法,探讨了SPME萃取烷基铅的实验条件,并对GC/MS条件进行了优化。结果表明:四甲基铅和四乙基铅分别在5～1000ng/mL和1～500ng/mL范围内有良好的线性关系,检出限分别为四甲基铅5.19ng/mL,四乙基铅1.05ng/mL。方法用于合成水样分析,四甲基铅和四乙基铅的回收率在87.5%～110.6%之间,相对标准偏差在1.7%～6.5%之间。     

自制四氧化三锰纳米粒子固相萃取-电感耦合等离子体质谱法测定蔬菜中铅和铜北大核心CSCD

采用自制四氧化三锰纳米粒子固相萃取-电感耦合等离子体质谱法测定蔬菜中铅和铜的含量。优化的固相萃取条件如下:(1)样品溶液的pH为4.0;(2)样品溶液的流量为1.0mL·min^(-1);(3)四氧化三锰纳米粒子的用量为50mg;(4)洗脱剂为3mol·L^(-1)盐酸溶液,用量为2mL;(5)样品溶液的体积为20mL。铅和铜的线性范围依次为0.01~5.0,0.02~1.0μg·L^(-1),检出限(3s/k)依次为4,8ng·L^(-1)。加标回收率为80.0%~108%,测定值的相对标准偏差(n=7)为0.94%~3.2%。     

聚[2-(丙烯酰氧基)乙基]三甲基氯化铵-乙二醇二甲基丙烯酸酯整体柱固相萃取结合高效液相色谱法测定尿液中3种苯二氮■类药物

以[2-(丙烯酰氧基)乙基]三甲基氯化铵(DAC)为单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂在注射器中制备聚合物整体柱,用其固相萃取尿液中溴西泮(BRZ)、劳拉西泮(LRZ)和地西泮(DZP)3种苯二氮■类药物(BZDs),并采用高效液相色谱法(HPLC)分析。实验考察了整体柱聚合时间及固相萃取条件(淋洗溶液、洗脱溶剂种类和体积)对BZDs萃取效率的影响。结果表明,仅聚合4 h得到的整体柱对BZDs吸附效率为100%。取尿液样品4 mL上样,用4 mL H_2O冲洗,1 mL乙酸乙酯洗脱,采用高效液相色谱分析。在最优条件下,3种BZDs在4.0～1 000 ng/mL范围内线性关系良好(r=0.999),检出限(S/N=3)和定量限(S/N=10)分别为1.0～1.2 ng/mL和3.3～4.0 ng/mL;在10、25和50 ng/mL加标水平下回收率为81.4%～102%,日内(n=3)和日间(n=3)相对标准偏差分别为1.2%～4.5%和2.5%～8.3%。该整体柱可对尿液中3种BZDs有效净化,且富集达12～15倍。方法构筑的聚合物整体柱制备简单,萃取高效,可成功用于尿液中3种BZDs的分析。     

高效液相色谱-电感耦合等离子体质谱法测定烟草及其制品中3种铅形态

建立了高效液相色谱-电感耦合等离子体质谱法(HPLC-ICP-MS)测定烟草及其制品中无机铅[Pb(Ⅱ)]、三甲基铅(TML)和三乙基铅(TEL)含量的方法.将烟草样品粉碎后,加入体积比为60∶40的1 mmol·L-1 1-戊烷磺酸钠溶液和甲醇的混合溶液(流动相)15 mL,于40℃超声萃取20 min,离心,上清液...     

高效液相色谱-电感耦合等离子质谱法测定土壤中的三甲基铅和三乙基铅

建立并优化了土壤中三甲基铅(TML)和三乙基铅(TEL)形态提取方法,构建了高效液相色谱-电感耦合等离子体质谱联用技术分离测定三甲基铅(TML)和三乙基铅(TEL)形态的分析方法。通过改变流动相组分比例,使TML和TEL的有机铅形态达到基线分离。TML和TEL有机铅的检出限分别达到0.15μg·kg-1和0.35μg·kg-1;峰面积的RSD分别为4.6%和5.5%。对浓度范围为0.5~100μg·kg~(-1)有机铅混合标准溶液进行线性动态范围测定,结果两种有机铅的回归系数均在0.9998以上。比较了几种不同的样品提取方法,得到土壤用80%甲醇的乙酸溶液振荡过夜后,上清液pH调值至9,用0.5mol·L~(-1)的DDTC、0.1mol·L~(-1)的EDTA和正己烷溶液提取,TML和TEL的加标回收率均大于98.0%。利用建立的方法,对实际土壤样品进行有机铅测定,在部分样品中检测到TML和TEL有机铅化合物形态。     

气相色谱法分析尿液样品中的阿特拉津及其代谢物

建立了尿液样品中阿特拉津(ATZ)及其代谢物脱乙基阿特拉津(DEA)、脱异丙基阿特拉津(DIA)、脱乙基脱异丙基阿特拉津(DEDIA)的气相色谱分析方法。样品经乙酸乙酯萃取、硫酸钠脱水、弗罗里硅土净化、浓缩后用气相色谱-电子俘获检测器分析。对样品萃取时的pH值等条件进行了优化,获得了较好的回收率。方法的检出限分别为DEDIA 0.0025 mg/L,DEA、DIA、ATZ 0.005 mg/L。4种化合物在进样量为0.2~8 ng时与其峰面积呈良好的线性关系。利用该方法对阿特拉津生产厂工人的尿液样品进行了分析,尿液中4种化合物的质量浓度为：DEDIA 0.003～0.301 mg/L,DEA 0.005～0.011 mg/L,DIA 0.006～0.276 mg/L,ATZ 0.005～0.012 mg/L。     

毛细管电泳-电感耦合等离子体质谱联用测定海藻中铅形态化合物

建立了毛细管电泳( CE)与电感耦合等离子体质谱( ICP-MS)联用技术测定铅离子( PbⅡ)、三甲基铅(TML)和三乙基铅(TEL)3种不同形态铅化合物的方法,以及海藻中不同形态铅化合物的提取技术,实现了海藻中3种铅形态化合物的定性定量分析。结果表明：以70 mmol/L H3BO3-17.5 mmol/L Na2B4O7(pH 8.90)为缓冲溶液,在最佳CE-ICP-MS条件下3种铅化合物20 min内可实现有效分离,重现性较好,迁移时间RSD﹤4%,峰面积的RSD﹤5%;在10~200μg/L 范围内3种铅化合物线性较好,相关系数大于0.90; PbⅡ、TML和TEL的CE-ICP-MS检出限(3S/N,以Pb计)分别为0.091,0.023和0.030μg/L;采用分步提取海藻中Pb元素,提取率高达80%以上,以藻体为基底 PbⅡ, TML 和 TEL 回收率分别为103.6%,95.7%和90.6%;通过检测紫菜和海带中铅含量,结果显示藻体内Pb主要以PbⅡ形式存在。本方法具有简单、高效、样品消耗量少等优点,可为海藻及其它海产品的质量控制提供技术支撑。     

高效液相色谱-串联质谱法同时测定盐酸拉贝洛尔中三种杂质

建立高效液相色谱-串联质谱法同时测定盐酸拉贝洛尔中2-羟基-5-[1-羟基-2-[(1-甲基-3-苯丙基)氨基]乙基]苯甲酸、2-羟基-5-[1-羟基-2-[(1-甲基-3-苯丙基)氨基]乙基]苯甲酸甲酯和2-羟基-5-(2-(4-苯基丁-2-氨基)乙酰)苯甲酰胺的含量。采用Agilent Eclipse XDB-C18柱（250 mm×4.6 mm,5μm）为分离柱,以0.1%（质量分数）的乙酸溶液为流动相A,乙腈-0.1%的乙酸溶液（体积比为1∶1）为流动相B,流量为1.5 mL/min,梯度洗脱,柱温为40℃,进样体积为10μL,离子源为大气压化学电离源,采用多反应监测模式。三种杂质的质量浓度分别在1.0160～203.20、1.0320～206.40、1.0370～207.40 ng/mL范围内与色谱峰面积线性相关,相关系数均大于0.999,3种化合物的检出限均为0.03ng/mL,定量限均为0.10 ng/mL。样品平均回收率分别为95.3%、92.4%、91.9%,测定结果的相对标准偏差分别为1.44%、1.46%、1.11%(n=9)。该方法可用于同时测定盐酸拉贝洛尔中3...     

固相萃取-柱后衍生-反相高效液相色谱法测定脱水蒜粉中的亚硫酸盐

建立了测定脱水蒜粉中亚硫酸盐含量的柱后衍生-反相高效液相色谱分析方法.样品用HCl/甘露醇缓冲溶液提取,经固相萃取(SPE)小柱净化本底并富集待测物后,与甲醛缓冲液反应生成稳定的化合物羟甲基磺酸盐,采用高效液相色谱柱及柱后衍生分离,紫外检测器检测,外标法定量.色谱柱为:Agila Venusil MP-C18(4.6 mm×250 mm),流动相为0.005 mol/L四丁基氢氧化铵离子溶液(pH 4),检测波长为450 nm,结果表明,检出限为2.0 mg/kg,在0.1～10.0 μg/mL范围内线性关系良好,相关系数R2=0.9998,样品添加回收率为86.5%～97.6%,RSD为2.2%～4.0%(n=5).     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.