Effects of complexants on [Ni1/3Co1/3Mn1/3]CO3 morphology and electrochemical performance of LiNi1/3Co1/3Mn1/3O2

LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials for the application of lithium ion batteries were synthesized by carbonate co-precipitation routine using different ammonium salt as a complexant. The structures and morphologies of the precursor [Ni_1/3Co_1/3Mn_1/3]CO₃ and LiNi_1/3Co_1/3Mn_1/3O₂ were investigated through X-ray diffraction, scanning electron microscope, and transmission electron microscopy. The electrochemical properties of LiNi_1/3Co_1/3Mn_1/3O₂ were examined using charge/discharge cycling and cyclic voltammogram tests. The results revealed that the microscopic structures, particle size distribution, and the morphology properties of the precursor and electrochemical performance of LiNi_1/3Co_1/3Mn_1/3O₂ were primarily dependent on the complexant. Among all as-prepared LiNi_1/3Co_1/3Mn_1/3O₂ cathode materials, the sample prepared from Na₂CO₃–NH₄HCO₃ routine using NH₄HCO₃ as the complexant showed the smallest irreversible capacity of 19.5 mAh g⁻¹ and highest discharge capacity of 178.4 mAh g⁻¹ at the first cycle as well as stable cycling performance (98.7% of the initial capacity was retained after 50 cycles) at 0.1 C (20 mA g⁻¹) in the voltage range of 2.5–4.4 V vs. Li⁺/Li. Moreover, it delivered high discharge capacity of over 135 mAh g⁻¹ at 5 C (1,000 mA g⁻¹).     

1-Organyl-2-azasilatran-3-ones

New 1-organyl-2-azasilatran-3-ones have been synthesized via the reaction of trifunctional silanes RSiX₃ (R = Et, Pr, Ph, CH₂=CH, or ClCH₂; X = Cl or Me₂N) with N,N-bis(2-hydroxyethyl)glycinamides (HOCH₂CH₂)₂NCH₂C(O)NHR (R = H or Me) and their N′,O-trimethylsilyl derivatives. The obtained products can be hydrolyzed to give the corresponding organylsilanetriols. Lithiation of 1-methyl- and 1-phenyl-2-azasilatran-3-ones with n-butyllithium or their reduction with lithium aluminum hydride leads to the products of splitting of the atrane backbone RSiBu₃ and RSiH₃ (R = Me or Ph), respectively.     

Electrochemical behavior of spherical LiNi1/3Co1/3Mn1/3O2 as cathode material for aqueous rechargeable lithium batteries

Spherical LiNi_1/3Co_1/3Mn_1/3O₂ powders have been synthesized from co-precipitated spherical metal hydroxide. The electrochemical performances of the LiNi_1/3Co_1/3Mn_1/3O₂ electrodes in 1 M LiNO₃, 5 M LiNO₃, and saturated LiNO₃ aqueous electrolytes have been studied using cyclic voltammetry and ac impedance tests in this work. The results show that LiNi_1/3Co_1/3Mn_1/3O₂ electrode in saturated LiNO₃ electrolyte exhibits the best electrochemical performance. An aqueous rechargeable lithium battery containing LiNi_1/3Co_1/3Mn_1/3O₂ cathode, LiV_2.9Ni_0.050Mn_0.050O₈ anode, and saturated LiNO₃ electrolyte is fabricated. The battery delivers an initial capacity of 98.2 mAh g⁻¹ and keeps a capacity of 63.9 mAh g⁻¹ after 50 cycles at a rate of 0.5 C (278 mA g⁻¹ was assumed to be 1 C rate).     

Synthesis and surface treatment of LiNi1/3Co1/3Mn1/3O2 cathode materials for Li-ion batteries

In order to shorten process time and possibly reduce synthesis cost of LiNi_1/3Co_1/3Mn_1/3O₂, the cathode material was prepared by solution combustion and microwave synthesis routes with reduced duration of calcination. The products were also surface-modified with Al₂O₃ by a mechano-thermal coating process to enhance cyclability. The structure and morphology of the bare and the surface-modified LiNi_1/3Co_1/3Mn_1/3O₂ samples were characterized by X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, energy-dispersive spectroscopy, and differential scanning calorimetry techniques. At a 0.1-C rate and between 4.6 and 2.5 V, the products delivered a first-cycle discharge capacity of as much as 195 mA h/g. Surface modification of LiNi_1/3Co_1/3Mn_1/3O₂ with alumina resulted in improved cyclability.     

Coating of Al2O3 on layered Li(Mn1/3Ni1/3Co1/3)O2 using CO2 as green precipitant and their improved electrochemical performance for lithium ion batteries

Li(Mn_1/3Ni_1/3Co_1/3)O₂ cathode materials were fabricated by a hydroxide precursor method. Al₂O₃ was coated on the surface of the Li(Mn_1/3Ni_1/3Co_1/3)O₂ through a simple and effective one-step electrostatic self-assembly method. In the coating process, a NHCO₃-H₂CO₃ buffer was formed spontaneously when CO₂ was introduced into the NaAlO₂ solution. Compared with bare Li(Mn_1/3M_1/3Co_1/3)O₂, the surface-modified samples exhibited better cycling performance, rate capability and rate capability retention. The Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ electrodes delivered a discharge capacity of about 115 mAh·g^?1 at 2 A·g^?1, but only 84 mAh·g^?1 for the bare one. The capacity retention of the Al₂O₃-coated Li(Mn_1/3Ni_1/3Co_1/3)O₂ was 90.7% after 50 cycles, about 30% higher than that of the pristine one.     

Excess Molar Enthalpies of the Ternary System {x1CH3CH2COOCH2CH3+x2CH3(CH2)4CH3+(1-x1-x2)CH3CH2CH2OH} at 298.15 K,and Prediction Using Different Theoric Methods

Abstract

Excess molar enthalpies at the temperature 298.15 K and atmospheric pressure of the ternary mixture {x₁CH₃CH₂COOCH₂CH₃+x₂CH₃(CH₂)₄CH₃+(1-x₁-x₂)CH₃CH₂CH₂OH}and of the involved binary mixtures {xCH₃CH₂COOCH₂CH₃+(1-x)CH₃CH₂CH₂OH} and {xCH₃(CH₂)₄CH₃ + (1-x)CH₃CH₂CH₂OH}were measured using a Calvet microcalorimeter. Variable degree polynomials were fitted to the results. The group contribution models of Nitta-Chao and UNIFAC (versions of Tassios, Larsen and Gmehling) were used to estimate ternary excess enthalpy values, and the results were compared to the experimental data. Several empirical expressions for estimating ternary properties from binary results were also applied.     

Improvement of electrochemical properties of LiNi1/3Mn1/3Co1/3O2 by coating with La0.4Ca0.6CoO3

In this paper, La_0.4Ca_0.6CoO₃-coated LiNi_1/3Mn_1/3Co_1/3O₂ is successfully prepared by the sol–gel method associated with microwave pyrolysis method. The structure and electrochemical properties of the La_0.4Ca_0.6CoO₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ are investigated by using X-ray diffraction (XRD), electrochemical impedance spectroscopy (EIS), and charge/discharge tests. XRD analyses show that the La_0.4Ca_0.6CoO₃ coating does not change the structure of LiNi_1/3Co_1/3Mn_1/3O₂. The electrochemical performance studies demonstrate that 2 wt.% La_0.4Ca_0.6CoO₃-coated LiNi_1/3Co_1/3Mn_1/3O₂ powders exhibit the best electrochemical properties, with an initial discharge capacity of 156.9 mAh g^–1 and capacity retention of 98.9 % after 50 cycles when cycled at a current density of 0.2 C between 2.75 and 4.3 V. La_0.4Ca_0.6CoO₃ coating can improve the rate performance because of the enhancement of the surface electronic/ionic transportation by the coating layer. EIS results suggest that the coating La_0.4Ca_0.6CoO₃ plays an important role in suppressing the increase of cell impedance with cycling especially for the increase of charge-transfer resistance.     

Reaction of 2-methyl-3-morpholino-1-phenylprop-2-en-1-one with Ru3(CO)12

The reaction of Ru₃(CO)₁₂ with 2-methyl-3-morpholino-1-phenylprop-2-en-1-one (1) produced the Ru₆(CO)₁₆(μ₄-η¹:η¹:η²:η²-PhC(O)-C(Me)=C)₂ (2), Ru₂O₂(CO)₄(η³-OC(Ph)C(Me)C(H)C(Me)₂C(Ph))₂ (3), and [Ru(CO)₂(PhCO₂)(O(CH₂-CH₂)₂NH]₂ (4) complexes, which were characterized by IR and NMR spectroscopy. The structures of the complexes were established by X-ray diffraction. The formation of the complexes is accompanied by deamination of ligand 1. Complexes 2 and 3 bearing the vinyl ketone groups contain five-membered oxaruthenacycles and dihydropyran rings. Morpholine is not removed from the reaction mixture and leads to the formation of complex 4. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2063–2068, December, 2006.     

Lifetime measurements of the 2p 3d 3 D 1, 2, 3 0 and 2p 3d 1 P 1 0 levels in NII by beam-foil-laser spectroscopy

Accurate lifetimes measured by means of the cascade-free method based on laser excitation of a fast ion beam preexcited in a carbon foil are reported for four 2p 3d levels in NII. The lifetime results are: τ(2p 3d ³ D ₁ ⁰ )=0.209±0.007 ns, τ(2p 3d ³ D ₂ ⁰ )=0.219±0.007 ns, τ(2p 3d ³ D ₃ ⁰ )=0.217±0.005 ns, and τ(2p 3d ¹ P ₁ ⁰ )=0.410±0.017 ns. These results are compared to theoretical and experimental lifetimes reported previously.     

Preparation and characterization of carbon-coated Li[Ni1/3Co1/3Mn1/3]O2 cathode material for lithium-ion batteries

The carbon-coated Li[Ni_1/3Co_1/3Mn_1/3]O₂ was synthesized from the porous Li[Ni_1/3Co_1/3Mn_1/3]O₂ precursor using citric acid as the carbon source. The electrochemical results showed that both cycling performance and rate capability were improved by the carbon-coating of the Li[Ni_1/3Co_1/3Mn_1/3]O₂ materials. It is proposed that the enhanced electrochemical properties by the carbon-coating are attributed to the increased electronic conductivity because the carbon distributed among the surfaces of spherical Li[Ni_1/3Co_1/3Mn_1/3]O₂ powders favored the transference of electron and reduced cell polarization.     

Preparation and Electrochemical Performance of Li[Ni1/3Co1/3Mn1/3]O2 Synthesized Using Li2CO3 as Template

Porous structure Li[Ni_1/3Co_1/3Mn_1/3]O₂ has been synthesized via a facile carbonate co‐precipitation method using Li₂CO₃ as template and lithium‐source. The physical and electrochemical properties of the materials were examined by many characterizations including TGA, XRD, SEM, EDS, TEM, BET, CV, EIS and galvanostatic charge‐discharge cycling. The results indicate that the as‐synthesized materials by this novel method own a well‐ordered layered structure α‐NaFeO₂ [space group: R‐3m(166)], porous morphology, and an average primary particle size of about 150 nm. The porous material exhibits larger specific surface area and delivers a high initial capacity of 169.9 mAh·g^?1 at 0.1 C (1 C=180 mA·g^?1) between 2.7 and 4.3 V, and 126.4, 115.7 mAh·g^?1 are still respectively reached at high rate of 10 C and 20 C. After 100 charge‐discharge cycles at 1 C, the capacity retention is 93.3%, indicating the excellent cycling stability.     

A study on carbon-coated LiNi1/3Mn1/3Co1/3O2 cathode material for lithium secondary batteries

The surface of LiNi_1/3Mn_1/3Co_1/3O₂ was coated with amorphous carbon to enhance the conductivity of the material. Electrochemical studies were performed by assembling 2032 coin cells with lithium metal as an anode. When carbon was coated on the surface, the LiNi_1/3Mn_1/3Co_1/3O₂ cathode material showed an improved rate capability, thermal stability, and cycle performance.     

State‐state transitions for CCl2(X1A1, A1B1, a3B1) radical and collisional quenching of CCl2(A1B1 and a3B1) by O2, N2, NO,N2O,NH3, and various aminated molecules

CCl₂ free radicals were produced by a pulsed dc discharge of CCl₄ in Ar. Ground electronic state CCl₂(X) radicals were electronically excited to the A¹B₁ (0,4,0) vibronic state with an Nd:YAG laser pumped dye laser at 541.52 nm. Experimental quenching data of excited CCl₂(A¹B₁ and a³B₁) by O₂, N₂, NO, N₂O, NH₃, NH(CH₃)₂, NH(C₂H₅)₂, and N(C₂H₅)₃ molecules were obtained by observing the time‐resolved total fluorescence signal of the excited CCl₂ radical in a cell, which showed a superposition of two exponential decay components under the presence of quencher. The quenching rate constants k_A of CCl₂(A) state and k_a of CCl₂(a) state were derived by analyzing the experimental data according to a proposed three‐level model to deal with the CCl₂(X¹A₁, A¹B₁, a³B₁) system. The formation cross sections of complexes of electronically excited CCl₂ radicals with O₂, N₂, NO, N₂O, NH₃, and aminated molecules were calculated by means of a collision‐complex model. © 2002 Wiley Periodicals, Inc. Int J Chem Kinet 34: 351–356, 2002     

Enhanced electrochemical performance and mechanism study of AgLi1/3Sn2/3O2 for lithium storage

Herein, AgLi_1/3Sn_2/3O₂ with delafossite structure was prepared by treating the layered compound Li₂SnO₃ with molten AgNO₃ via ion exchange of Li⁺ for Ag⁺. The structure characterization and the electrochemical performance of AgLi_1/3Sn_2/3O₂ was thoroughly investigated. AgLi_1/3Sn_2/3O₂ is found to possess stacking lamellar morphology, which means small electrochemical impedance and so facilitates charge transfer kinetics during the cycling. Compared with Li₂SnO₃, due to the introducing of excellent electrical conductivity of silver, AgLi_1/3Sn_2/3O₂ exhibits improved electrochemical performance in terms of capacity, cycling stability and coulombic efficiency. The results show AgLi_1/3Sn_2/3O₂ presents favorable specific capacity of 339 mAh/g at current density of 200 mA/g after 50 cycles and initial coulombic efficiency of 96%. Ex situ XRD analysis revealed the reaction mechanism of AgLi_1/3Sn_2/3O₂ as an anode for lithium ion batteries.     

Oxygen Evolution in Overcharged LixNi1/3Co1/3Mn1/3O2 Electrode and Its Thermal Analysis Kinetics

The oxygen evolution behavior in overcharged LiNi_1/3Co_1/3Mn_1/3O₂‐based electrode was investigated by differential scanning calorimetry and thermal gravimetric (DSC/TG). Meantime, its thermal kinetic parameters were calculated by Kissinger's and Ozawa's method. As observed by DSC/TG, two exothermic peaks at 239 and 313°C in washed cathode (4.6 V), were attributed to two steps of oxygen evolution. More importantly, the temperature of its oxygen release processes decreased obviously compared with that charged to 2.8 V. Activation energy (E) for the first and second oxygen evolution, both of which were assumed closely to be the first order reaction, between 200 and 350°C in Li_0.204Ni_1/3Co_1/3Mn_1/3O₂‐based electrode were calculated as 113.63 and 158.13 kJ·mol⁻¹, respectively and the corresponding Arrhenius pre‐exponential factors (A) of 1.05×10¹¹ and 6.46×10¹³s⁻¹ were also obtained. The different energy barrier of such two steps of oxygen evolution should probably be ascribed to the different bond energy of M–O (M=Mn, Co, Ni).     

PbCu3(OH)(NO3)(SeO3)3·1/2H2O und Pb2Cu3O2(NO3)2(SeO3)2: Synthese und Kristallstrukturuntersuchung

Crystals of PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O [a=7.761(3)Å,b=9.478(4)Å,c=9.514(4)Å, =66.94(2)°, =69.83(2)°, =81.83(2)°, space group P ,Z=2] and Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ [a=5.884(2)Å,b=12.186(3)Å,c=19.371(4)Å, space group Cmc2₁,Z=4] were synthesized under hydrothermal conditions. Their crystal structures were refined with three-dimensional X-ray data toR _w=0.033 resp. 0.055. In PbCu₃(OH)(NO₃)(SeO₃)₃·1/2H₂O the Cu atoms are [4+1] and [4+2] coordinated and via SeO₃ groups a three-dimensional atomic arrangement is built up. In Pb₂Cu₃O₂(NO₃)₂(SeO₃)₂ there are sheets, which are connected only via Pb-O bonds ranging from 2.98 Å to 3.16 Å.

     

Study of lithium ion intercalation/de-intercalation into LiNi1/3Mn1/3Co1/3O2 in aqueous solution using electrochemical impedance spectroscopy

The mechanism of lithium ion intercalation/de-intercalation into LiNi_1/3Mn_1/3Co_1/3O₂ cathode material prepared by reactions under autogenic pressure at elevated temperatures method is investigated both in aqueous and non-aqueous electrolytes using electrochemical impedance spectroscopy (EIS) technique. In accordance with the results obtained an equivalent circuit is used to fit the impedance spectra. The kinetic parameters of intercalation/de-intercalation processes are evaluated with the help of the same equivalent circuit. The dependence of charge transfer resistance (R _ct), exchange current (I ₀), double layer capacitance (C _dl), Warburg resistance (Z _w), and chemical diffusion coefficient (D _Li+) on potential during intercalation/de-intercalation is studied. The behavior of EIS spectra and its potential dependence is studied to get the kinetics of the mechanism of intercalation/de-intercalation processes, which cannot be obtained from the usual electrochemical studies like cyclic voltammetry. The results indicate that intercalation and de-intercalation of lithium ions in aqueous solution follows almost similar mechanism in non-aqueous system. D _Li+ values are in the range of 10^?8 to 10^?14?cm²?s^?1 in aqueous 5?M LiNO₃ and that in non-aqueous 1?M LiAsF₆/EC+DMC electrolyte is in the order of 10^?12?cm²?s^?1 during the intercalation/de-intercalation processes. A typical cell LiTi₂ (PO4)₃/5?M LiNO₃/LiNi_1/3Mn_1/3Co_1/3O₂ is constructed and the cycling stability is compared to that with an organic electrolyte.     

Powder neutron diffraction of α-UB2C (α-UB2C-type)

The crystal structure of α-UB₂C (low temperature modification below T = 1675(25)°C) was determined from powder X-ray data (RT) and powder neutron diffraction data (at 29 K) employing the Rietveld-Young-Wiles profile analysis method. α-UB₂C crystallizes in the orthorhombic space group Pmma with a = 0.60338(3), B = 0.35177(2), C = 0.41067(2) nm, V = 0.0872 nm³, Z = 2. The residuals of the neutron refinement were R₁ = 0.032 and R_F = 0.043. The crystal structure of α-UB₂C is a new structure type where planar nonregular 6³-U-metal layers alternate with planar nonmetal layers of the type (B₆C₂)³. Boron atoms are in a typical triangular prismatic metal surrounding with a tetrakaidekahedral coordination B[U₆B₂C₁], whereas carbon atoms occupy the center points of rectangular bipyramids C[U₄B₂]. The crystal structure of α-UB₂C derives from the high temperature modification β-UB₂C (ThB₂C-type, ), which reveals a similar stacking of slightly puckered metal layers 6³, alternating with planar layers B₆ · (B₆C₃)². The phase transition from β-UB₂C to α-UB₂C is thus essentially generated by carbon diffusion within the B₆ · (B₆C₃)² layers to form (B₆C₂)³ layers.     

13C NMR spectra of 1-stearoyl-2-linoleyl-sn-glycero-3-phosphorylcholine and 1-stearoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine in CDCl3 solution and in sonicated dispersions in 2H2O

Two mixed-acid lecithins: 1-stearoyl-2-linoleyl-sn-glycero-3-phosphorylcholine (SLL) and 1-stearoyl-2-arachidonoyl-sn-glycero-3-phosphorylcholine (SAL) have been synthesized by phospholipase A₂ digestion of 1,2-distearoyl-sn-glycero-3-phosphorylcholine (DSL), followed by reacylation of the lysolecithin with the desired fatty acid anhydride. ¹³C (25.2 MHz) NMR spectra of SLL and SAL in CDCl₃ solution and in sonicated dispersions in ²H₂O have been obtained. Complete spectral assignments are reported for the two molecules in both systems. ¹³C nuclear spin-lattice relaxation times (T₁) of SLL and SAL in sonicated aqueous dispersions have also been measured. Relaxation rate profiles as a function of the chain segment position are in general agreement with those recently obtained from ²H NMR for similar systems.     

Über die Alkaliselenoarsenate(III) KAsSe3 · H2O,RbAsSe3 · 1/2 H2O und CsAsSe3 · 1/2 H2O

On the Alkali Selenoarsenates(III) KAsSe₃ · H₂O, RbAsSe₃ · 1/2 H₂O, and CsAsSe₃ · 1/2 H₂O The alkali selenoarsenates(III) KAsSe₃ · H₂O, RbAsSe₃ · 1/2 H₂O, and CsAsSe₃ · 1/2 H₂O have been prepared by hydrothermal reaction of the respective alkali carbonate with As₂Se₃ at a temperature of 135°C. Their X-ray structural analyses demonstrated that the compounds contain polyselenoarsenate(III) anions (AsSe₃^?)_n, in wich the basic units are ψ-AsSe₃ tetrahedra, which are linked together through Se? Se bonds into infinite zweier single chains. The Rb and Cs salts are isotypic.