Design and Synthesis of Isocyanide Ligands for Catalysis: Application to Rh‐Catalyzed Hydrosilylation of Ketones

New isocyanide ligands with meta‐terphenyl backbones were synthesized. 2,6‐Bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exhibited the highest rate acceleration in rhodium‐catalyzed hydrosilylation among other isocyanide and phosphine ligands tested in this study. ¹H NMR spectroscopic studies on the coordination behavior of the new ligands to [Rh(cod)₂]BF₄ indicated that 2,6‐bis[3,5‐bis(trimethylsilyl)phenyl]‐4‐methylphenyl isocyanide exclusively forms the biscoordinated rhodium–isocyanide complex, whereas less sterically demanding isocyanide ligands predominantly form tetracoordinated rhodium–isocyanide complexes. FTIR and ¹³C NMR spectroscopic studies on the hydrosilylation reaction mixture with the rhodium–isocyanide catalyst showed that the major catalytic species responsible for the hydrosilylation activity is the Rh complex coordinated with the isocyanide ligand. DFT calculations of model compounds revealed the higher affinity of isocyanides for rhodium relative to phosphines. The combined effect of high ligand affinity for the rhodium atom and the bulkiness of the ligand, which facilitates the formation of a catalytically active, monoisocyanide–rhodium species, is proposed to account for the catalytic efficiency of the rhodium–bulky isocyanide system in hydrosilylation.     

Synthesis,characterization, and electrochemistry of monophosphine‐containing diiron propane‐1,2‐dithiolate complexes related to the active site of [FeFe]‐hydrogenases

Five monophosphine‐substituted diiron propane‐1,2‐dithiolate complexes as the active site models of [FeFe]‐hydrogenases have been synthesized and characterized. Reactions of complex [Fe₂(CO)₆{μ‐SCH₂CH(CH₃)S}] ( 1 ) with a monophosphine ligand tris(4‐methylphenyl)phosphine, diphenyl‐2‐pyridylphosphine, tris(4‐chlorophenyl)phosphine, triphenylphosphine, or tris(4‐fluorophenyl)phosphine in the presence of the oxidative agent Me₃NO·2H₂O gave the monophosphine‐substituted diiron complexes [Fe₂(CO)₅(L){μ‐SCH₂CH(CH₃)S}] [L = P(4‐C₆H₄CH₃)₃, 2 ; Ph₂P(2‐C₅H₄N), 3 ; P(4‐C₆H₄Cl)₃, 4 ; PPh₃, 5 ; P(4‐C₆H₄F)₃, 6 ] in 81%–94% yields. Complexes 2 – 6 have been characterized by elemental analysis, spectroscopy, and X‐ray crystallography. In addition, electrochemical studies revealed that these complexes can catalyze the reduction of protons to H₂ in the presence of HOAc.     

On the P‐Coordinating Limit of NHC–Phosphenium Cations toward RhI Centers

Two types of imidazoliophosphane with additional electron‐withdrawing substituents, such as alkoxy or imidazolio groups, are experimentally described and theoretically studied. Diethyl N,N′‐2,4,6‐methyl(phenyl)imidazoliophosphonite is shown to retain a P‐coordinating ability toward a {RhCl(cod)} (cod=cycloocta‐1,5‐diene) center, thus competing with the cleavage of the labile C? P bond. Derivatives of N,N′‐phenylene‐bridged diimidazolylphenylphosphane were isolated in good yield. Whereas the dicationic phosphane proved to be inert in the presence of [{RhCl(cod)}₂], the monocationic counterpart was shown to retain the P‐coordinating ability toward a {RhCl(cod)} center, thus competing with the N‐coordinating ability of the nonmethylated imidazolyl substituent. The ethyl phosphinite version of the dication, thus possessing an extremely electron‐poor P^III center, was also characterized. According to the difference between the calculated homolytic and heterolytic dissociation energies, the N₂C???P bond of imidazoliophosphanes with aryl, amino, or alkoxy substituents on the P atom is shown to be of dative nature. The P‐coordinating properties of imidazoliophosphanes with various combinations of phenyl or ethoxy substituents on the P atom and those of six diimidazolophosphane derivatives with zero, one, or two methylium substituents on the N atom, were analyzed by comparison of the corresponding HOMOs and LUMOs and by calculation of the IR C?O stretching frequencies of their [RhCl(CO)₂] complexes. Comparison of the ν_CO values allows the family of the electron‐poor Im⁺PRR′ (Im=imidazolyl) potential ligands to be ranked in the following order versus (R,R′): P(OEt)₃<(Ph,Ph)<(Ph,OEt)<(OEt,OEt)<PF₃<(Ph,Im)<(Ph,Im⁺)<(OEt,Im⁺). The (Ph,Im) representative is therefore the least electron‐donating phosphane for which coordinating behavior toward a Rh^I center has been experimentally evidenced to date. Ultimate applications in catalysis could be envisaged.     

Single Oxygen‐Atom Insertion into PB Bonds: On‐ and Off‐Metal Transformation of a Borylphosphine into a Borylphosphinite

An oxygen atom is selectively inserted into the P?B bond of a borylphosphine ( L₁ ) by reaction with Me₃NO to afford the corresponding borylphosphinite ( L₂ ). This transformation can also be effected when L₁ is coordinated to rhodium. The ν(CO) values for trans‐[RhCl(CO)(L)₂] reveal very different electronic properties for coordinated L₁ and L₂ which translate into the strikingly different performances of the complexes [RhCl(L)(cod)] (L= L₁ or L₂ , cod=1,5‐cyclooctadiene) in hydrosilylation and hydroboration catalysis.     

Evaluation of ruthenium‐based catalytic systems for the controlled atom transfer radical polymerisation of vinyl monomers

Only [RuCl₂(p‐cymene)(PR₃)] complexes where the phosphine ligand, PR₃, is both strongly basic and bulky proved to be effective catalysts for the controlled atom transfer radical polymerisation (ATRP) of methyl methacrylate and styrene. The best phosphine ligands were typically P(i‐Pr)₃, P(cyclohexyl)₂Ph, P(cyclohexyl)₃, and P(cyclopentyl)₃. Less basic and/or bulky phosphines led to ineffective systems for ATRP. Tricyclohexylarsine gave rise to a highly efficient catalyst system. However, related complexes in which the phosphine ligand was replaced by tricyclohexylstibine, nitrogen (piperidine and 4‐cyanopyridine) and carbon ligands (alkyl isocyanides) proved to be inefficient. The observation of a direct relationship between the p‐cymene lability (measured by TGA) and catalyst activity suggests that p‐cymene release is a prerequisite for the polymerisation process.     

A 1,2,4‐diazaphospholane complex of rhodium

The crystal structure of a prospective olefin catalyst, namely {2‐[1‐acetyl‐5‐(2‐hydroxy­phenyl)‐4‐phenyl‐1,2,4‐di­aza­phospholan‐3‐yl]­phenyl acetate‐κP}chloro­(η⁴‐cyclo­octa‐1,5‐diene)rhodium(I) di­chloro­methane solvate, [RhCl(C₈H₁₂)(C₂₄H₂₃N₂O₄P)]·CH₂Cl₂, has been determined at 173 K. The five‐membered heterocycle of the phosphine ligand is in a slightly distorted twist conformation. An intramolecular N1—H1⃛Cl1 hydrogen bond contributes to the adopted conformation and may additionally participate in secondary interactions with substrates during catalysis.     

Carbonyl­[di­hydro­bis­(pyrazol‐1‐yl‐κN2)­borato]­hydrido­bis­(tri‐p‐tolyl­phosphine‐κP)­ruthenium(II)

The title compound, [RuH(C₆H₈BN₄)(C₂₁H₂₁P)₂(CO)], possesses two trans‐disposed tri‐p‐tolyl­phosphines in axial positions and the remaining ligands in equatorial positions. The overall geometry of the Ru^II ion is a distorted octahedral structure. The P—Ru—P axis deviates from linearity by about 13°. This distortion arises mainly from the steric congestion between the bulky phosphine moieties and the tetrahedral di­hydro­bis­(pyrazol‐1‐yl)­borate ligands.     

A highly efficient heterogeneous rhodium(I)‐catalyzed C–S coupling reaction of thiols with polychloroalkanes or alkyl halides under mild conditions

Heterogeneous C–S coupling reaction of thiols with polychloroalkanes or alkyl halides was achieved at 30 or 80 °C in the presence of 5 mol% of an MCM‐41‐immobilized bidentate phosphine rhodium complex (MCM‐41‐2P‐RhCl(PPh₃)) and triethylamine, yielding a variety of formaldehyde dithioacetals, ethylenedithioethers and unsymmetric thioethers in good to excellent yields. This heterogeneous rhodium catalyst can be easily recovered and recycled by simple filtration of the reaction solution and used for at least 10 consecutive trials without significant loss of activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Iridium Complexes of 2,2′‐Bidipyrrins

The reaction of [{Ir(cod)(μ‐Cl)}₂] and K₂CO₃ or of [{Ir(cod)(μ‐OMe)}₂] alone with the non‐natural tetrapyrrole 2,2′‐bidipyrrin (H₂BDP) yields, depending on the stoichiometry, the mononuclear complex [Ir(cod)(HBDP)] or the homodinuclear complex [{Ir(cod)}₂(BDP)]. Both complexes react readily with carbon monoxide to yield the species [Ir(CO)₂(HBDP)] and [{Ir(CO)₂}₂(BDP)], respectively. The results from NMR spectroscopy and X‐ray diffraction reveal different conformations for the tetrapyrrolic ligand in both complexes. The reaction of [{Ir(coe)₂(μ‐Cl)}₂] with H₂BDP proceeds differently and yields the macrocyclic [4e^?,2H⁺]‐oxidized product [IrCl₂(9‐Meic)] (9‐Meic = monoanion of 9‐methyl‐9,10‐isocorrole), which can be addressed as an iridium analog of cobalamin.     

Decorating step-by-step and independently the surface and the core of dendrons

Dendrons possessing one activated vinyl group at the core and several chlorine atoms at the end of the branches are used as starting materials to study the possibility to react independently the surface functions and the core function. In particular, the most powerful sequence of reactions for decorating them by organometallic complexes as end groups and amine or alcohol at the core has been determined. In the first step, phenol phosphines are grafted as end groups of the dendrons, and they can be used for the complexation of metals. However, these phosphines must be kept free when amines are used to react with the vinyl core in the next step. Depending on the type of phosphine end groups and on the type of function of the core (amine or alcohol), the complexation of ruthenium ([RuCl₂(p-cymene)]₂) and rhodium ([RhCl(COD)]₂) derivatives by the phosphine end groups can occur without side reaction at the core.     

Mono‐ and Binuclear Rhodium and Platinum Complexes of 1, 3, 5‐Trimethyl‐1, 3, 5‐triaza‐2σ3λ3‐phosphorin‐4, 6‐dionyloxy‐substituted Calix[4]arenes

The reaction behaviour of 1, 3, 5‐triaza‐2σ³λ³‐phosphorin‐4, 6‐dionyloxy‐substituted calix[4]arenes towards mono‐ and binuclear rhodium and platinum complexes was investigated. Special attention was directed to structure and dynamic behaviour of the products in solution and in the solid state. Depending on the molar ratio of the reactands, the reaction of the tetrakis(triazaphosphorindionyloxy)‐substituted calix[4]arene ( 4 ) and its tert‐butyl‐derivative ( 1 ) with [(cod)RhCl]₂ yielded the mono‐ and disubstituted binuclear rhodium complexes 2 , 3 , and 5 . In all cases, a C₂‐symmetrical structure was proved in solution, apparently caused by a fast intramolecular exchange process between cone conformation and 1, 3‐alternating conformation. The X‐ray crystal structure determination of 5 confirmed [(calixarene)RhCl]₂‐coordination through two opposite phosphorus atoms with a P ⃜P separation of 345 pm. The complex displays crystallographic inversion symmetry, and the Rh₂Cl₂ core is thus exactly planar. Reaction of 1 and of the bis(triazaphosphorindionyloxy)‐bis(methoxy)‐substituted tert‐butyl‐calix‐[4]arene ( 7 ) with (cod)Rh(acac) in equimolar ratio and subsequent reaction with HBF₄ led to the expected cationic monorhodium complexes 5 and 8 , involving 1, 3‐alternating P‐Rh‐P‐coordination. The cone conformation in solution was proved by NMR spectroscopy and characteristic values of the ¹J(PRh) coupling constants in the ³¹P‐NMR‐spectra. Reaction of equimolar amounts of 4 with (cod)Rh(acac) or (nbd)Rh(acac) led, by substitution of the labile coordinated acetylacetonato and after addition of HBF₄, to the corresponding mononuclear cationic complexes 9 and 10 . Only two of the four phosphorus atoms in 9 and 10 are coordinated to the central metal atom. Displacement of either cycloocta‐1, 5‐diene or norbornadiene was not observed. For both compounds, the cone conformation was proved by NMR spectroscopy. Reaction of 4 with (cod)PtCl₂ led to the PtCl₂‐complex ( 11 ). As for all compounds mentioned above, only two phosphorus atoms of the ligand coordinate to platinum, while two phosphorus atoms remain uncoordinated (proved by δ³¹P and characteristic values of ¹J(PPt)). NMR‐spectroscopic evidence was found for the existence of the cone conformation in the cis‐configuration of 11 .     

Synthesis of Aromatic Compounds by Catalytic C?C Bond Activation of Biphenylene or Angular [3]Phenylene

Substituted phenanthrenes and picenes were easily prepared by reaction of biphenylene or angular [3]phenylene with various alkynes in the presence of a catalytic amount of [IrCl(cod)]₂/dppe (cod=1,5‐cyclooctadiene, dppe=1,2‐bis(diphenylphosphino)ethane). The reaction is based on C? C bond activation of the cyclobutane ring. The reaction tolerates the presence of bulky groups on the alkyne, such as the ferrocene moiety. In addition, a catalytic system based on [RhCl(cod)]₂/dppe enabled the, hitherto unreported, reaction of biphenylene with nitriles to provide phenanthridines.     

Formation of 18e− and 16e− Acyl(η3‐cyclooctenyl)rhodium(III) Complexes in the Reaction of Cationic (Cycloocta‐1,5‐diene)rhodium(I) Compounds with 2‐(Diphenylphosphino)benzaldehyde

The reaction of cationic diolefinic rhodium(I) complexes with 2‐(diphenylphosphino)benzaldehyde (pCHO) was studied. [Rh(cod)₂]ClO₄ (cod=cycloocta‐1,5‐diene) reacted with pCHO to undergo the oxidative addition of one pCHO with (1,2,3‐η)cyclooct‐2‐en‐1‐yl (η³‐C₈H₁₃) formation, and the coordination of a second pCHO molecule as (phosphino‐κP)aldehyde‐κO(σ‐coordination) chelate to give the 18e⁻ acyl(allyl)rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(pCHO)]ClO₄ (see 1 ). Complex 1 reacted with [Rh(cod)(PR₃)₂]ClO₄ (R=aryl) derivatives 3 – 6 to give stable pentacoordinated 16e⁻ acyl[(1,2,3‐η)‐cyclooct‐2‐en‐1‐yl]rhodium(III) species [Rh(η³‐C₈H₁₃)(pCO)(PR₃)]ClO₄ 7 – 10 . The (1,2,3‐η)‐cyclooct‐2‐en‐1‐yl complexes contain cis‐positioned P‐atoms and were fully characterized by NMR, and the molecular structure of 1 was determined by X‐ray crystal diffraction. The rhodium(III) complex 1 catalyzed the hydroformylation of hex‐1‐ene and produced 98% of aldehydes (n/iso=2.6).     

Hydrosilylation reactions catalyzed by rhodium complexes with phosphine ligands functionalized with imidazolium salts

Hydrosilylation reactions of styrene with triethoxysilane catalyzed by rhodium complexes with phosphine ligands functionalized with imidazolium salts are reported. In comparison with Wilkinson’s catalyst, Rh(PPh₃)₃Cl, all of the present rhodium complexes with phosphines functionalized with imidazolium salts exhibit higher catalytic activity and selectivity.     

Tertiary Carbinamine Synthesis by Rhodium‐Catalyzed [3+2] Annulation of N‐Unsubstituted Aromatic Ketimines and Alkynes

A convenient and waste‐free synthesis of indene‐based tertiary carbinamines by rhodium‐catalyzed imine/alkyne [3+2] annulation is described. Under the optimized conditions of 0.5–2.5 mol % [{(cod)Rh(OH)}₂] (cod=1,5‐cyclooctadiene) catalyst, 1,3‐bis(diphenylphosphanyl)propane (DPPP) ligand, in toluene at 120 °C, N‐unsubstituted aromatic ketimines and internal alkynes were coupled in a 1:1 ratio to form tertiary 1H‐inden‐1‐amines in good yields and with high selectivities over isoquinoline products. A plausible catalytic cycle involves sequential imine‐directed aromatic C? H bond activation, alkyne insertion, and a rare example of intramolecular ketimine insertion into a Rh^I–alkenyl linkage.     

A Planar‐Chiral Rhodium(III) Catalyst with a Sterically Demanding Cyclopentadienyl Ligand and Its Application in the Enantioselective Synthesis of Dihydroisoquinolones

The rapid development of enantioselective C?H activation reactions has created a demand for new types of catalysts. Herein, we report the synthesis of a novel planar‐chiral rhodium catalyst [(C₅H₂^tBu₂CH₂^tBu)RhI₂]₂ in two steps from commercially available [(cod)RhCl]₂ and tert‐butylacetylene. Pure enantiomers of the catalyst were obtained through separation of its diastereomeric adducts with natural (S)‐proline. The catalyst promoted enantioselective reactions of aryl hydroxamic acids with strained alkenes to give dihydroisoquinolones in high yields (up to 97 %) and with good stereoselectivity (up to 95 % ee).     

Synthesis of new C60 based phosphines

Two series of new phosphine derivatives based on C₆₀ protected by borane have been synthesized and characterized. These phosphines were used for two preliminary complexation trials with [RhCl(COD)]₂ and [Re(S₃CPh)₂(S₂CPh)] to afford, respectively, the corresponding complexes [RhCl(COD)(PRPh₂)] and [Re(S₂CPh)₃(PRPh₂)].     

Chloride‐Bridged Dinuclear Rhodium(III) Complexes Bearing Chiral Diphosphine Ligands: Catalyst Precursors for Asymmetric Hydrogenation of Simple Olefins

Efficient rhodium(III) catalysts were developed for asymmetric hydrogenation of simple olefins. A new series of chloride‐bridged dinuclear rhodium(III) complexes 1 were synthesized from the rhodium(I) precursor [RhCl(cod)]₂, chiral diphosphine ligands, and hydrochloric acid. Complexes from the series acted as efficient catalysts for asymmetric hydrogenation of (E)‐prop‐1‐ene‐1,2‐diyldibenzene and its derivatives without any directing groups, in sharp contrast to widely used rhodium(I) catalytic systems that require a directing group for high enantioselectivity. The catalytic system was applied to asymmetric hydrogenation of allylic alcohols, alkenylboranes, and unsaturated cyclic sulfones. Control experiments support the superiority of dinuclear rhodium(III) complexes 1 over typical rhodium(I) catalytic systems.     

Probing the steric limits of rhodium catalyzed hydrophosphinylation. P-H addition vs. dimerization/oligomerization/polymerization

The reactivity of secondary phosphine oxides containing bulky organic fragments in hydrophosphinylation reactions has been investigated using several rhodium based catalysts. Upon heating in a focused microwave reactor, HP(O)(2-C₆H₄Me)₂ adds to prototypical terminal alkynes affording a complex mixture containing 1,2 and 1,1-addition products. Addition of a second ortho-substituent (HP(O)Mes₂) completely suppresses the hydrophosphinylation reaction for alkyl and aryl substituted alkynes. Variations in the temperature, catalyst loading, solvent, and microwave power were unable to induce an addition reaction in the case of HP(O)Mes₂. While this secondary phosphine oxide did not participate in the hydrophosphinylation reaction, it promoted the polymerization of phenylacetylene. HP(O)R₂ substrates are not commonly thought of as innocent ligands for rhodium complexes in reactions involving alkynes due to facile hydrophosphinylation. While this is certainly true for diphenylphosphine oxide, the chemistry presented herein suggests that HP(O)Mes₂ and related bulky secondary phosphine oxides have great potential as valuable ligands for rhodium catalyzed transformations involving alkynes due to their lack of reactivity towards the addition reaction.     

New rhodium(I) water‐soluble complexes with 1‐alkyl‐1‐azonia‐3,5‐diaza‐7‐phospha‐adamantane iodides and their catalytic activity

The water‐soluble phosphine ligands, 1,3,5‐triaza‐7‐phosphatricyclo[3.3.1.1^3,7]decane (tpa) and 1‐alkyl‐1‐azonia‐3,5‐diaza‐7‐phosphatricyclo[3.3.1.1^3,7]decane iodides (Rtpa⁺I⁻), with alkyl=methyl(mtpa⁺I⁻), ethyl (etpa⁺I⁻) and n‐propyl, (ptpa⁺I⁻), and mtpa⁺Cl⁻ react with [Rh₂Cl₂(CO)₄] giving the rhodium(I) complexes [RhCl(CO)(tpa)₂], [RhI(CO)(Rtpa⁺I⁻)₂], [RhCl‐­(CO)(mtpa⁺Cl⁻)₃] and [RhI(CO)(Rtpa⁺I⁻)₃]. The properties and reactivities of the complexes have been investigated using ¹H and ³¹PNMR and IR spectroscopies. The five‐coordinate complexes in solutions show dynamic properties. The complexes are catalysts of the water‐gas shift reaction, the hydrogenation of CC and CO bonds, the hydroformylation of alkenes and the isomerization of unsaturated compounds. Copyright © 1999 John Wiley & Sons, Ltd.