Alternative Synthesis of 2‐Hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one

The 2‐hydroxy‐3,5,5‐trimethylcyclopent‐2‐en‐1‐one ( 1 ) was synthesized in 42% yield by rearrangement of epoxy ketone 10 on treatment with BF₃⋅Et₂O under anhydrous conditions. Intermediate 10 was available from the known enone 8 , either via direct epoxidation (60% H₂O₂, NaOH, MeOH; yield 50%), or via reduction to the corresponding allylic alcohol 14 (LiAlH₄, THF), followed by epoxidation ([VO(acac)₂], ^tBuOOH) and reoxidation under Swern conditions, in 37% total yield.     

Synthesis and Conformational Analysis of 1′‐ and 3′‐Substituted 2‐Deoxy‐2‐fluoro‐D‐ribofuranosyl Nucleosides

Convergent syntheses of the 9‐(3‐X‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranosyl)adenines 5 (X=N₃) and 7 (X=NH₂), as well as of their respective α‐anomers 6 and 8 , are described, using methyl 2‐azido‐5‐O‐benzoyl‐2,3‐dideoxy‐2‐fluoro‐β‐D ‐ribofuranoside ( 4 ) as glycosylating agent. Methyl 5‐O‐benzoyl‐2,3‐dideoxy‐2,3‐difluoro‐β‐D ‐ribofuranoside ( 12 ) was prepared starting from two precursors, and coupled with silylated N⁶‐benzoyladenine to afford, after deprotection, 2′,3′‐dideoxy‐2′,3′‐difluoroadenosine ( 13 ). Condensation of 1‐O‐acetyl‐3,5‐di‐O‐benzoyl‐2‐deoxy‐2‐fluoro‐β‐D ‐ribofuranose ( 14 ) with silylated N²‐palmitoylguanine gave, after chromatographic separation and deacylation, the N⁷‐β‐anomer 17 as the main product, along with 2′‐deoxy‐2′‐fluoroguanosine ( 15 ) and its N⁹‐α‐anomer 16 in a ratio of ca. 42 : 24 : 10. An in‐depth conformational analysis of a number of 2,3‐dideoxy‐2‐fluoro‐3‐X‐D ‐ribofuranosides (X=F, N₃, NH₂, H) as well as of purine and pyrimidine 2‐deoxy‐2‐fluoro‐D ‐ribofuranosyl nucleosides was performed using the PSEUROT (version 6.3) software in combination with NMR studies.     

Synthesis of Bis‐Heterocyclic 1H‐Imidazole 3‐Oxides from 3‐Oxido‐1H‐imidazole‐4‐carbohydrazides

The reaction of 1H‐imidazole‐4‐carbohydrazides 1 , which are conveniently accessible by treatment of the corresponding esters with NH₂NH₂?H₂O, with isothiocyanates in refluxing EtOH led to thiosemicarbazides (=hydrazinecarbothioamides) 4 in high yields (Scheme 2). Whereas 4 in boiling aqueous NaOH yielded 2,4‐dihydro‐3H‐1,2,4‐triazole‐3‐thiones 5 , the reaction in concentrated H₂SO₄ at room temperature gave 1,3,4‐thiadiazol‐2‐amines 6 . Similarly, the reaction of 1 with butyl isocyanate led to semicarbazides 7 , which, under basic conditions, undergo cyclization to give 2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐ones 8 (Scheme 3). Treatment of 1 with Ac₂O yielded the diacylhydrazine derivatives 9 exclusively, and the alternative isomerization of 1 to imidazol‐2‐ones was not observed (Scheme 4). It is important to note that, in all these transformations, the imidazole N‐oxide residue is retained. Furthermore, it was shown that imidazole N‐oxides bearing a 1,2,4‐triazole‐3‐thione or 1,3,4‐thiadiazol‐2‐amine moiety undergo the S‐transfer reaction to give bis‐heterocyclic 1H‐imidazole‐2‐thiones 11 by treatment with 2,2,4,4‐tetramethylcyclobutane‐1,3‐dithione (Scheme 5).     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

A two‐dimensional cadmium(II) coordination polymer constructed from 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate and 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate ligands

Crystals of poly[[aqua[μ₃‐4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylato‐κ⁵O¹O^1′:N³,O⁴:O⁵][μ₄‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylato‐κ⁷N³,O⁴:O⁴,O^4′:O¹,O^1′:O¹]cadmium(II)] monohydrate], {[Cd₂(C₁₅H₁₄N₂O₄)(C₁₆H₁₄N₂O₆)(H₂O)]·H₂O}_n or {[Cd₂(Hcpimda)(cpima)(H₂O)]·H₂O}_n, (I), were obtained from 1‐(4‐carboxybenzyl)‐2‐propyl‐1H‐imidazole‐4,5‐dicarboxylic acid (H₃cpimda) and cadmium(II) chloride under hydrothermal conditions. The structure indicates that in‐situ decarboxylation of H₃cpimda occurred during the synthesis process. The asymmetric unit consists of two Cd²⁺ centres, one 4‐carboxy‐1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐5‐carboxylate (Hcpimda²⁻) anion, one 1‐(4‐carboxylatobenzyl)‐2‐propyl‐1H‐imidazole‐4‐carboxylate (cpima²⁻) anion, one coordinated water molecule and one lattice water molecule. One Cd²⁺ centre, i.e. Cd1, is hexacoordinated and displays a slightly distorted octahedral CdN₂O₄ geometry. The other Cd centre, i.e. Cd2, is coordinated by seven O atoms originating from one Hcpimda²⁻ ligand and three cpima²⁻ ligands. This Cd²⁺ centre can be described as having a distorted capped octahedral coordination geometry. Two carboxylate groups of the benzoate moieties of two cpima²⁻ ligands bridge between Cd2 centres to generate [Cd₂O₂] units, which are further linked by two cpima²⁻ ligands to produce one‐dimensional (1D) infinite chains based around large 26‐membered rings. Meanwhile, adjacent Cd1 centres are linked by Hcpimda²⁻ ligands to generate 1D zigzag chains. The two types of chains are linked through a μ₂‐η² bidentate bridging mode from an O atom of an imidazole carboxylate unit of cpima²⁻ to give a two‐dimensional (2D) coordination polymer. The simplified 2D net structure can be described as a 3,6‐coordinated net which has a (4³)₂(4⁶.6⁶.8³) topology. Furthermore, the FT–IR spectroscopic properties, photoluminescence properties, powder X‐ray diffraction (PXRD) pattern and thermogravimetric behaviour of the polymer have been investigated.     

Layer‐by‐layer Assembled Multilayers of Graphene/Mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin for Detection of Dopamine

Graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin multilayer films composed of graphene sheet (GS) and mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were fabricated easily by two steps. First, negatively charged graphene oxide (GO) and positively charged mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (NH₂‐β‐CD) were layer‐by‐layer (LBL) self‐assembled on glassy carbon electrode (GCE) modified with a layer of poly(diallyldimethylammonium chloride) (PDDA). Then graphene/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GS/NH₂‐β‐CD) multilayer films were built up by electrochemical reduction of graphene oxide/mono‐(6‐amino‐6‐deoxy)‐β‐cyclodextrin (GO/NH₂‐β‐CD). Combining the high surface area of GS and the active recognition sites on β‐cyclodextrin (β‐CD), the GS/NH₂‐β‐CD multilayer films show excellent electrochemical sensing performance for the detection of DA with an extraordinary broad linear range from 2.53 to 980.05 µmol·L^?1. This study offers a simple route to the controllable formation of graphene‐based electrochemical sensor for the detection of DA.     

3‐Cyano‐6‐hydroxy‐4‐methyl‐2‐pyridone: two new pseudopolymorphs and two cocrystals with products of an in situ nucleophilic aromatic substitution

Four crystal structures of 3‐cyano‐6‐hydroxy‐4‐methyl‐2‐pyridone (CMP), viz. the dimethyl sulfoxide monosolvate, C₇H₆N₂O₂·C₂H₆OS, (1), the N,N‐dimethylacetamide monosolvate, C₇H₆N₂O₂·C₄H₉NO, (2), a cocrystal with 2‐amino‐4‐dimethylamino‐6‐methylpyrimidine (as the salt 2‐amino‐4‐dimethylamino‐6‐methylpyrimidin‐1‐ium 5‐cyano‐4‐methyl‐6‐oxo‐1,6‐dihydropyridin‐2‐olate), C₇H₁₃N₄⁺·C₇H₅N₂O₂⁻, (3), and a cocrystal with N,N‐dimethylacetamide and 4,6‐diamino‐2‐dimethylamino‐1,3,5‐triazine [as the solvated salt 2,6‐diamino‐4‐dimethylamino‐1,3,5‐triazin‐1‐ium 5‐cyano‐4‐methyl‐6‐oxo‐1,6‐dihydropyridin‐2‐olate–N,N‐dimethylacetamide (1/1)], C₅H₁₁N₆⁺·C₇H₅N₂O₂⁻·C₄H₉NO, (4), are reported. Solvates (1) and (2) both contain the hydroxy group in a para position with respect to the cyano group of CMP, acting as a hydrogen‐bond donor and leading to rather similar packing motifs. In cocrystals (3) and (4), hydrolysis of the solvent molecules occurs and an in situ nucleophilic aromatic substitution of a Cl atom with a dimethylamino group has taken place. Within all four structures, an R₂²(8) N—H...O hydrogen‐bonding pattern is observed, connecting the CMP molecules, but the pattern differs depending on which O atom participates in the motif, either the ortho or para O atom with respect to the cyano group. Solvents and coformers are attached to these arrangements via single‐point O—H...O interactions in (1) and (2) or by additional R₄⁴(16) hydrogen‐bonding patterns in (3) and (4). Since the in situ nucleophilic aromatic substitution of the coformers occurs, the possible Watson–Crick C–G base‐pair‐like arrangement is inhibited, yet the cyano group of the CMP molecules participates in hydrogen bonds with their coformers, influencing the crystal packing to form chains.     

Stereoselective Synthesis of [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐D‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐Hexafluoro‐N‐(2‐hydroxyethoxy)‐L‐valine]cyclosporin A

Addition of various amines to the 3,3‐bis(trifluoromethyl)acrylamides 10a and 10b gave the tripeptides 11a – 11f , mostly as mixtures of epimers (Scheme 3). The crystalline tripeptide 11f ₂ was found to be the N‐terminal (2‐hydroxyethoxy)‐substituted (R,S,S)‐ester HOCH₂CH₂O‐D ‐Val(F₆)‐MeLeu‐Ala‐O^tBu by X‐ray crystallography. The C‐terminal‐protected tripeptide 11f ₂ was condensed with the N‐terminus octapeptide 2b to the depsipeptide 12a which was thermally rearranged to the undecapeptide 13a (Scheme 4). The condensation of the epimeric tripeptide 11f ₁ with the octapeptide 2b gave the undecapeptide 13b directly. The undecapeptides 13a and 13b were fully deprotected and cyclized to the [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐D ‐valine]]‐ and [5‐[4,4,4,4′,4′,4′‐hexafluoro‐N‐(2‐hydroxyethoxy)‐L ‐valine]]cyclosporins 14a and 14b , respectively (Scheme 5). Rate differences observed for the thermal rearrangements of 12a to 13a and of 12b to 13b are discussed.     

Synthesis of 1,3,4‐Oxadiazole Acyclo C‐Nucleosides Bearing 5‐Methylthio{7‐substituted‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}moieties

Oxidative cyclization of the sugar hydrazones ( 3_a‐f ) derived from {7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐ylsulfanyl}acetic acid hydrazide ( 1 ) and aldopentoses 2_a‐c or aldohexoses 2_d‐f with bromine in acetic acid in the presence of anhydrous sodium acetate, followed by acetylation with acetic anhydride gave the corresponding 2‐(per‐O‐acetyl‐alditol‐l‐yl)‐5‐methylthio{7H‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 5_a‐f ). Condensative cyclization of the sugar hydrazones ( 3_a‐f ) by heating with acetic anhydride gave the corresponding 3‐acetyl‐2‐(per‐O‐acetyl‐alditol‐1‐yl)‐2,3‐dihydro‐5‐methylthio{7‐acetyl‐1,2,4‐triazolo[1,5‐d]tetrazol‐6‐yl}‐1,3,4‐oxadiazoles ( 11_a‐f ). De‐O‐acetylation of the acyclo C‐nucleoside peracetates ( 5 and 11 ) with methanolic ammonia afforded the hydrazono lactones ( 7 ) and the acyclo C‐nucleosides ( 12 ), respectively. The structures of new oxadiazole derivatives were confirmed by analytical and spectral data.     

Synthesis of 4‐Aryl‐4,6‐dihydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐diones from Biginelli Compounds

Biginelli compounds 1 were first brominated at Me? C(6) with 2,4,4,6‐tetrabromocyclohex‐2,5‐dien‐1‐one to give Br₂CH? C(6) derivatives 2 . The hydrolysis of the 6‐(dibromomethyl) group of 2c to give the 6‐formyl derivative 3c in the presence of an expensive Ag salt followed by reaction with N₂H₄?H₂O yielded tetrahydropyrimido[4,5‐d]pyridazine‐2,5(1H,3H)‐dione ( 4c ; Scheme 1). However, treatment of the 6‐(dibromomethyl) derivatives 2 directly with N₂H₄?H₂O led to the fused heterocycles 4 in better overall yield (Schemes 1 and 2; Table).     

A one‐dimensional lead(II) coordination polymer with terminal and bridging 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands

In the coordination polymer catena‐poly[[[diaqua[5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ²N³,O⁴]lead(II)]‐μ‐5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylato‐κ³N³,O⁴:N²] dihydrate], {[Pb(C₁₀H₆N₃O₄)(H₂O)₂]·2H₂O}_n, the two 5‐carboxy‐2‐(pyridin‐3‐yl)‐1H‐imidazole‐4‐carboxylate ligands have different coordination modes, one being terminal and the other bridging. The bridging ligand links Pb^II cations into one‐dimensional coordination polymer chains. The structure is also stabilized by intra‐ and interchain π–π stacking interactions between the pyridine rings, resulting in the formation of a two‐dimensional network. Extensive hydrogen‐bonding interactions lead to the formation of a three‐dimensional supramolecular network.     

Synthesis of 3‐(ω‐Hydroxyalkoxy)isobenzofuran‐1(3H)‐ones by Trifluoroacetic Acid‐Mediated Lactonization of tert‐Butyl 2‐(1,3‐Dioxol‐2‐yl)‐ or 2‐(1,3‐Dioxan‐2‐yl)benzoates

An efficient two‐step method for the preparation of 3‐(2‐hydroxyethoxy)‐ or 3‐(3‐hydroxypropoxy)isobenzofuran‐1(3H)‐ones 3 has been developed. Thus, the reaction of 1‐(1,3‐dioxol‐2‐yl)‐ or 1‐(1,3‐dioxan‐2‐yl)‐2‐lithiobenzenes, generated in situ by the treatment of 1‐bromo‐2‐(1,3‐dioxol‐2‐yl)‐ or 1‐bromo‐2‐(1,3‐dioxan‐2‐yl)benzenes 1 with BuLi in THF at ?78°, with (Boc)₂O afforded tert‐butyl 2‐(1,3‐dioxol‐2‐yl)‐ or 2‐(1,3‐dioxan‐2‐yl)benzoates 2 , which can subsequently undergo facile lactonization on treatment with CF₃COOH (TFA) in CH₂Cl₂ at 0° to give the desired products in reasonable yields.     

Highly Stereoselective β‐Mannopyranosylation via the 1‐α‐Glycosyloxy‐isochromenylium‐4‐gold(I) Intermediates

While the gold(I)‐catalyzed glycosylation reaction with 4,6‐O‐benzylidene tethered mannosyl ortho‐alkynylbenzoates as donors falls squarely into the category of the Crich‐type β‐selective mannosylation when Ph₃PAuOTf is used as the catalyst, in that the mannosyl α‐triflates are invoked, replacement of the ^?OTf in the gold(I) complex with less nucleophilic counter anions (i.e., ^?NTf₂, ^?SbF₆, ^?BF₄, and ^?BAr₄^F) leads to complete loss of β‐selectivity with the mannosyl ortho‐alkynylbenzoate β‐donors. Nevertheless, with the α‐donors, the mannosylation reactions under the catalysis of Ph₃PAuBAr₄^F (BAr₄^F=tetrakis[3,5‐bis(trifluoromethyl)phenyl]borate) are especially highly β‐selective and accommodate a broad scope of substrates; these include glycosylation with mannosyl donors installed with a bulky TBS group at O3, donors bearing 4,6‐di‐O‐benzoyl groups, and acceptors known as sterically unmatched or hindered. For the ortho‐alkynylbenzoate β‐donors, an anomerization and glycosylation sequence can also ensure the highly β‐selective mannosylation. The 1‐α‐mannosyloxy‐isochromenylium‐4‐gold(I) complex ( Cα ), readily generated upon activation of the α‐mannosyl ortho‐alkynylbenzoate ( 1 α ) with Ph₃PAuBAr₄^F at ?35 °C, was well characterized by NMR spectroscopy; the occurrence of this species accounts for the high β‐selectivity in the present mannosylation.     

Effect of Medium Acidity and Photostability of 3‐(4‐Dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP): A New Green Emitting Laser Dye

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the effect of medium acidity and photoreactivity of 3‐(4‐dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP) has been investigated in dimethylformamide and in chloromethane solvents such as methylenechloride, chloroform and carbon tetrachloride. The dye solution (ca. 5×10⁻⁴ mol·L⁻¹ in DMF) gives a good laser emission in the range 470–560 nm with emission maximum at 515 nm upon pumping by nitrogen laser (λ_ex=337.1 nm). The laser parameters such as gain coefficient (α), emission cross section (δ_e) and half life energy (E_1/2) at maximum laser emission are also determined.     

Three isotypic polymeric complexes with rare earth cations,but‐2‐enoate anions and 4,4′‐(ethane‐1,2‐diyl)dipyridine and 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligands

Three isotypic rare earth complexes, catena‐poly[[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐bis(μ‐but‐2‐enoato)‐κ³O,O′:O;κ³O:O,O′‐[aquabis(but‐2‐enoato‐κ²O,O′)yttrium(III)]‐μ‐4,4′‐(ethane‐1,2‐diyl)dipyridine‐κ²N:N′], [Y₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], the gadolinium(III) analogue, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₂N₂)(H₂O)₂], and the gadolinium(III) analogue with a 4,4′‐(ethene‐1,2‐diyl)dipyridine bridging ligand, [Gd₂(C₄H₅O₂)₆(C₁₂H₁₀N₂)(H₂O)₂], are one‐dimensional coordination polymers made up of centrosymmetric dinuclear [M(but‐2‐enoato)₃(H₂O)]₂ units (M = rare earth), further bridged by centrosymmetric 4,4′‐(ethane‐1,2‐diyl)dipyridine or 4,4′‐(ethene‐1,2‐diyl)dipyridine spacers into sets of chains parallel to the [20] direction. There are intra‐chain and inter‐chain hydrogen bonds in the structures, the former providing cohesion of the linear arrays and the latter promoting the formation of broad planes parallel to (010).     

Topological identification of the first uninodal 8‐connected lsz MOF built from 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylate pillars and cadmium(II)–triazolate layers

Using polynuclear metal clusters as nodes, many high‐symmetry high‐connectivity nets, like 8‐connnected bcu and 12‐connected fcu , have been attained in metal–organic frameworks (MOFs). However, construction of low‐symmetry high‐connected MOFs with a novel topology still remains a big challenge. For example, a uninodal 8‐connected lsz network, observed in inorganic ZrSiO₄, has not been topologically identified in MOFs. Using 2,2′‐difluorobiphenyl‐4,4′‐dicarboxylic acid (H₂L) as a new linker and 1,2,4‐triazole (Htrz) as a coligand, a novel three‐dimensional Cd^II–MOF, namely poly[tetrakis(μ₄‐2,2′‐difluorobiphenyl‐4,4′‐dicarboxylato‐κ⁵O¹,O^1′:O^1′:O⁴:O^4′)tetrakis(N,N‐dimethylformamide‐κO)tetrakis(μ₃‐1,2,4‐triazolato‐κ³N¹:N²:N⁴)hexacadmium(II)], [Cd₆(C₁₄H₆F₂O₄)₄(C₂H₂N₃)₄(C₃H₇NO)₄]_n, (I), has been prepared. Single‐crystal structure analysis indicates that six different Cd^II ions co‐exist in (I) and each Cd^II ion displays a distorted [CdO₄N₂] octahedral geometry with four equatorial O atoms and two axial N atoms. Three Cd^II ions are connected by four carboxylate groups and four trz⁻ ligands to form a linear trinuclear [Cd₃(COO)₄(trz)₄] cluster, as do the other three Cd^II ions. Two Cd₃ clusters are linked by trz⁻ ligands in a μ_1,2,4‐bridging mode to produce a two‐dimensional Cd^II–triazolate layer with (6,3) topology in the ab plane. These two‐dimensional layers are further pillared by the L²⁻ ligands along the c axis to generate a complicated three‐dimensional framework. Topologically, regarding the Cd₃ cluster as an 8‐connected node, the whole architecture of (I) is a uninodal 8‐connected lsz framework with the Schläfli symbol (4²²·6⁶). Complex (I) was further characterized by elemental analysis, IR spectroscopy, powder X‐ray diffraction, thermogravimetric analysis and a photoluminescence study. MOF (I) has a high thermal and water stability.     

A three‐dimensional ZnII coordination framework: poly[[μ2‐(E)‐1,2‐bis(pyridin‐4‐yl)ethene][μ4‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato][μ2‐(E)‐2,2′‐(diazene‐1,2‐diyl)dibenzoato]dizinc(II)]

In the title coordination polymer, [Zn₂(C₁₄H₈N₂O₄)₂(C₁₂H₁₀N₂)]_n, the asymmetric unit contains one Zn^II cation, two halves of 2,2′‐(diazene‐1,2‐diyl)dibenzoate anions (denoted L²⁻) and half of a 1,2‐bis(pyridin‐4‐yl)ethene ligand (denoted bpe). The three ligands lie across crystallographic inversion centres. Each Zn^II centre is four‐coordinated by three O atoms of bridging carboxylate groups from three L²⁻ ligands and by one N atom from a bpe ligand, forming a tetrahedral coordination geometry. Two Zn^II atoms are bridged by two carboxylate groups of L²⁻ ligands, generating a [Zn₂(CO₂)₂] ring. Each loop serves as a fourfold node, which links its four equivalent nodes via the sharing of four L²⁻ ligands to form a two‐dimensional [Zn₂L₄]_n net. These nets are separated by bpe ligands acting as spacers, producing a three‐dimensional framework with a 4⁶6⁴ topology. Powder X‐ray diffraction and solid‐state photoluminescence were also measured.     

Two seven‐membered heterocycles with 1,2‐diaza ring N atoms: 3,5,7‐triphenyl‐1,2‐diazacyclohepta‐1(7),2‐diene and 3,7‐bis(2‐hydroxyphenyl)‐5‐phenyl‐1,2‐diazacyclohepta‐1(7),2‐diene

The title compounds, 3,5,7‐triphenyl‐1,2‐diazacyclohepta‐1(7),2‐diene, C₂₃H₂₀N₂, (I), and 3,7‐bis(2‐hydroxyphenyl)‐5‐phenyl‐1,2‐diazacyclohepta‐1(7),2‐diene, C₂₃H₂₀N₂O₂, (II), constitute the first structurally characterized examples of seven‐membered heterocycles with 1,2‐diaza ring N atoms. Compound (I) crystallizes in the space group P, with two independent molecules in the asymmetric unit that differ in the conformation of one of the phenyl rings, while (II) crystallizes in the space group C2/c. The C₅N₂ ring in each of (I) and (II) adopts a twist‐boat conformation. Compound (I) exhibits neither C—H...π interactions nor π–π stacking interactions, whereas (II) shows both intramolecular O—H...N hydrogen bonds and a C—H...π interaction that joins the molecules into an infinite chain in the [010] direction.     

N-(4-甲基苯甲酰氨基) N’-[5-(2-三氟甲基苯基)-2-呋喃甲酰硫脲的合成、晶体结构测定与生物活性测定

本文首次合成标题化合物N-(4-甲基苯甲酰氨基)-N’-[5-(2-三氟甲基苯基)-2-呋喃甲酰硫脲。化合物(C21H16F3N3O3S, Mr = 447.43)单晶经测定为单斜晶体,空间群为P -1。在晶体中,存在一些分子内和分子间的相互作用,分子间还有C—H···π 的相互作用,这可能导致晶体更稳定的原因。目标产物的结构经IR, H NMR和元素分析测定确证。初步生物活性测试表明,部分化合物对棉花枯萎病、黄瓜灰霉病、苹果轮纹病和棉花炭疽病有较好的选择性杀菌活性;部分目标化合物有较好的除草活性。     

2‐Azido‐2‐deoxycellulose: Synthesis and 1,3‐Dipolar Cycloaddition

Chitosan ( 1 ) was prepared by basic hydrolysis of chitin of an average molecular weight of 70000 Da, ¹H‐NMR spectra indicating almost complete deacetylation. N‐Phthaloylation of 1 yielded the known N‐phthaloylchitosan ( 2 ), which was tritylated to provide 3a and methoxytritylated to 3b . Dephthaloylation of 3a with NH₂NH₂?H₂O gave the 6‐O‐tritylated chitosan 4a . Similarly, 3b gave the 6‐O‐methoxytritylated 4b . CuSO₄‐Catalyzed diazo transfer to 4a yielded 95% of the azide 5a , and uncatalyzed diazo transfer to 4b gave 82% of azide 5b . Further treatment of 5a with CuSO₄ produced 2‐azido‐2‐deoxycellulose ( 7 ). Demethoxytritylation of 5b in HCOOH gave 2‐azido‐2‐deoxy‐3,6‐di‐O‐formylcellulose ( 6 ), which was deformylated to 7 . The 1,3‐dipolar cycloaddition of 7 to a range of phenyl‐, (phenyl)alkyl‐, and alkyl‐monosubstituted alkynes in DMSO in the presence of CuI gave the 1,2,3‐triazoles 8 – 15 in high yields.