Reduction of Oxide Mixtures of (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + CuO) and (Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> + Co<Subscript>3</Subscript>O<Subscript>4</Subscript>) by Low-Temperature Hydrogen Plasma

The paper presents experimental results pertaining to the reduction of oxide mixtures namely (Fe₂O₃ + CuO) and (Fe₂O₃ + Co₃O₄), by low-temperature hydrogen plasma in a microwave hydrogen plasma set-up, at microwave power 750 W and hydrogen flow rate 2.5 × 10^?6 m³ s^?1. The objective was to examine the effect of addition of CuO or Co₃O₄, on the reduction of Fe₂O₃. In the case of the Fe₂O₃ and CuO mixture, oxides were reduced to form Fe and Cu metals. Enhancement of reduction of iron oxide was marginal. However, in the case of the Fe₂O₃ and Co₃O₄ mixture, FeCo alloy was formed within compositions of Fe₇₀Co₃₀, to Fe₃₀Co₇₀. Since the temperature was below 841 K, no FeO formed during reduction and the sequence of Fe₂O₃ reduction was found to be Fe₂O₃ → Fe₃O₄ → Fe. Reduction of Co₃O₄ preceded that of Fe₂O₃. In the beginning, the reduction of oxides led to the formation of Fe–Co alloy that was rich in Co. Later Fe continued to enter into the alloy phase through diffusion and homogenization. The lattice strain of the alloy as a function of its composition was measured. In the oxide mixture in which excessive amount of Co₃O₄ was present, all the Co formed after reduction could not form the alloy and part of it appeared as FCC Co metal. The crystallite size of the alloy was in the range of 22–30 nm. The crystal size of the Fe–Co alloy reduced with an increase in Co concentration.     

Synthesis and study of lead(II) uranate Pb(UO<Subscript>2</Subscript>)<Subscript>2</Subscript>O<Subscript>2</Subscript>(OH)<Subscript>2</Subscript>·H<Subscript>2</Subscript>O

An individual crystalline compound Pb(UO₂)₂O₂(OH)₂·(H₂O) was obtained by reaction of synthetic schoepite UO₃·2.25H₂O with an aqueous solution of lead(II) nitrate under hydrothermal conditions. The composition and structure of this compound were determined, and the processes of its dehydration and thermal decomposition were studied by chemical analysis, X-ray diffraction, IR spectroscopy, and thermography.     

Phase equilibria in the Nb<Subscript>2</Subscript>O<Subscript>5</Subscript>–CdO system and the thermal stability of Cd<Subscript>2</Subscript>Nb<Subscript>2</Subscript>O<Subscript>7</Subscript> and CdNb<Subscript>2</Subscript>O<Subscript>6</Subscript>

Phase equilibria were studied in the Nb₂O₅–CdO system in the Nb₂O₅-rich region including CdNb₂O₆ and Cd₂Nb₂O₇. It was determined that CdNb₂O₆ and Cd₂Nb₂O₇ in air are stable to 1150 and 1120°C, respectively, and that, above these temperatures, there is solid-phase decomposition of niobates with CdO release in the gas phase. Along with the cadmium oxide evaporation, the Cd₂Nb₂O₇ decomposition is accompanied by the formation of cadmium metaniobate CdNb₂O₆ and the CdNb₂O₆ decomposition results in the formation of niobium oxide Nb₂O₅. No thermal events were observed in the differential thermal analysis curve for a 1: 1 CdNb₂O₆–Cd₂Nb₂O₇ mixture heated to 1100°C in air, which suggests that there are neither phase transformations in cadmium niobates, nor a eutectic within this temperature and concentration ranges. A study of the morphology of compacted samples of niobates determined specific conditions for producing dense composite ceramics, a mixture of niobates, that is suitable for using as a dielectric material.     

Structural and Temperature Dependent Electrical Conductivity Properties of Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–Sm<Subscript>2</Subscript>O<Subscript>3</Subscript> CO-Doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

In the present work, Dy₂O₃ and Sm₂O₃ double-doped Bi₂O₃-based materials are synthesized by exploiting the solid-state synthesis method. The structural and temperature dependent electrical properties of these ternary ceramic samples, which are candidate materials for solid oxide fuel cell (SOFCs) electrolyte, are determined by means of a powder X-ray diffractometer (XRD), the four point-probe method (FPPM), and the thermal-gravimetry/differential thermal analysis (TG/DTA). As a result of the XRD measurements, the fluorite-type fcc δ-phase with a stable structure is obtained for higher values of the dopant oxide material, which are the samples with the maximum content of fixed 20% Dy₂O₃ and 15% and 20% Sm₂O₃. The samples with the stable δ-phase structure have higher conductivities. The highest electrical conductivity is found for the (Bi₂O₃)0.6(Dy₂O₃)_0.2(Sm₂O₃)_0.2 sample, which was 2.5×10^–2 (Ohm cm)^–1 at 750 °C. The activation energies are also calculated from the Arrhenius charts, which were determined from the FPPM measurements. The lowest activation energy is found as 0.85 eV for the sample with the highest electrical conductivity.     

Crystal structure and thermal properties of [Au(en)<Subscript>2</Subscript>]<Subscript>2</Subscript>[Cu(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>2</Subscript>]<Subscript>3</Subscript>·8H<Subscript>2</Subscript>O

The crystal structure of a double complex salt of the composition [Au(en)₂]₂[Cu(C₂O₄)₂]₃·8H₂O (en = ethylenediamine) at 150 K is determined by single crystal X-ray diffraction. The crystal data for C₂₀H₄₈Au₂Cu₃N₈O₃₂ are: a = 9.1761(3) Å, b = 16.9749(6) Å, c = 13.4475(5) Å, β = 104.333(1)°, V = 2029.43(12) ų, P2₁/c space group, Z = 2, d _x = 2.450 g/cm³. It is demonstrated that the thermal decomposition of the double complex salt in a helium or hydrogen atmosphere affords the solid solution Au_0.4Cu_0.6.     

Synthesis and properties of γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions

The textural and structural properties of mixed oxides Ga₂O₃–Al₂O₃, obtained via impregnating γ-Al₂O₃ with a solution of Ga(NO₃)₃ and subsequent heat treatment, are studied. According to the results from X-ray powder diffraction, gallium ions are incorporated into the structure of aluminum oxide to form a solid solution of spinel-type γ-Ga₂O₃–Al₂O₃ up to a Ga₂O₃ content of 50 wt % of the total weight of the sample, accompanied by a reduction in the specific surface area, volume, and average pore diameter. It is concluded that when the Ga₂O₃ content exceeds 50 wt %, the β-Ga₂O₃ phase is observed along with γ-Ga₂O₃–Al₂O₃ solid solution. ⁷¹Ga and ²⁷Al NMR spectroscopy shows that gallium replaces aluminum atoms from the tetrahedral position to the octahedral coordination in the structure of γ-Ga₂O₃–Al₂O₃.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Solubility and stability of (NH<Subscript>4</Subscript>)<Subscript>2</Subscript>SO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O<Subscript>2</Subscript> in organic and aqueous-organic media

Solubility and stability of (NH₄)₂SO₄·H₂O₂ in organic solvents (glycerol, ethylene glycol, TOSOL-A40 OM antifreeze), in mixtures of an organic solvent and water, and in pure water was studied. Crystallographic properties of the ammonium sulfate precipitating from aqueous-organic solvents and aqueous solutions in various time intervals and differing from ordinary (NH₄)₂SO₄ in solubility and one of crystallographic parameters were analyzed.     

Concentration Space of Homogeneous Garnet in the System Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–(Y,Bi)<Subscript>3</Subscript>(Fe,Ga)<Subscript>5</Subscript>O<Subscript>12</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

The concentration space of homogeneous garnet in the system Ga₂O₃–(Y, Bi)₃(Fe, Ga)₅O₁₂–Fe₂O₃ was determined by X-ray powder diffraction analysis. The obtained results expand the knowledge of the possible variations of cation ratios Y : Bi : Fe : Ga in garnet, which can be used for searching for and creating new stable magneto-optical materials.     

Another Structure Type of Oxotris(oxalato)niobate(V): Molecular and Crystal Structure of Rb<Subscript>3</Subscript>[NbO(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]⋅2H<Subscript>2</Subscript>O

The compound Rb₃[NbO(C₂O₄)₃]⋅2H₂O (1) has been synthesized by two different methods and its exact chemical composition established. The niobium atom is heptacoordinated by oxygen atoms forming a distorted pentagonal bipyramid. Inspite of some similarities, the structure of 1 is not isotypic with the structure of (NH₄)₃[NbO(C₂O₄)₃]⋅H₂O.     

Thermal studies of ZnO–B<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript>–TeO<Subscript>2</Subscript> glasses

The effect of TeO₂ additions on the thermal behaviour of zinc borophosphate glasses were studied in the compositional series (100 − x)[0.5ZnO–0.1B₂O₃–0.4P₂O₅]–xTeO₂ by differential scanning calorimetry, thermodilatometry and heating microscopy thermal analysis. The addition of TeO₂ to the starting borophosphate glass resulted in a linear increase of glass transition temperature and dilatometric softening temperature, whereas the thermal expansion coefficient decreased. Most of glasses crystallize under heating within the temperature range of 440–640 °C. The crystallization temperature steeply decreases with increasing TeO₂ content. The lowest tendency towards crystallization was observed for the glasses containing 50 and 60 mol% TeO₂. X-ray diffraction analysis showed that major compounds formed by annealing of the glasses were Zn₂P₂O₇, BPO₄ and α-TeO₂. Annealing of the powdered 50ZnO–10B₂O₃–40P₂O₅ glass leads at first to the formation of an unknown crystalline phase, which is gradually transformed to Zn₂P₂O₇ and BPO₄ during subsequent heating.     

Synthesis and heat capacity study of stannates Dy<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> and Ho<Subscript>2</Subscript>Sn<Subscript>2</Subscript>O<Subscript>7</Subscript> in the range 370–1000 K

Stannates Dy₂Sn₂O₇ and Ho₂Sn₂O₇ are produced by solid-phase synthesis from Dy₂O₃ (Ho₂O₃)–SnO₂ stoichiometric mixtures by calcining at 1473 K. The molar heat capacity of holmium and dysprosium stannates is measured by differential scanning calorimetry (DSC) in the temperature range 370–1000 K. The experimental data are used to calculate thermodynamic properties (enthalpy change H°(T)–H°(370 K), entropy change S°(T)–S°(370 K), and the reduced Gibbs free energy Φ°(T)) of the synthesized compound.     

On the Control of Plasma Parameters and Active Species Kinetics in CF<Subscript>4</Subscript> + O<Subscript>2</Subscript> + Ar Gas Mixture by CF<Subscript>4</Subscript>/O<Subscript>2</Subscript> and O<Subscript>2</Subscript>/Ar Mixing Ratios

The effects of both CF₄/O₂ and Ar/O₂ mixing ratios in three-component CF₄ + O₂ + Ar mixture on plasma parameters, densities and fluxes of active species determining the dry etching kinetics were analyzed. The investigation combined plasma diagnostics by Langmuir probes and zero-dimensional plasma modeling. It was found that the substitution of CF₄ for O₂ at constant fraction of Ar in a feed gas produces the non-monotonic change in F atom density, as it was repeatedly reported for the binary CF₄/O₂ gas mixtures. At the same time, the substitution of Ar for O₂ at constant fraction of CF₄ results in the monotonic increase in F atom density toward more oxygenated plasmas. The natures of these phenomena as well as theirs possible impacts on the etching/polymerization kinetics were discussed in details.     

Sol–Gel Synthesis of Na<Subscript>2</Subscript>O-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-P<Subscript>2</Subscript>O<Subscript>5</Subscript> Glasses and their Characterization by NMR,SNMS, and AFM

Sodium aluminophosphate samples with composition 43.8Na₂O12.5Al₂O₃43.8P₂O₅ were prepared by the sol–gel route using different precursors and working in different pH ranges from pH < 1 up to pH > 10. The structures of the gels and of the corresponding glasses were investigated by solid state NMR and compared to that of a glass with the same composition prepared by a traditional melting process. In addition to bulk materials, thin films were deposited by dip coating on silica glasses. Applying secondary neutral mass spectrometry (SNMS), the expected elements and residual carbon were identified. The surfaces of the coatings and fracture surfaces of bulk material were investigated using atomic force microscopy (AFM). Solid state NMR revealed that samples prepared via a lactate route exhibited local Al and P environments closest to that of the melt-prepared glass, with the highest extent of Al-O-P connectivity.     

Thermal analysis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1−x</Subscript>(Y<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new ecological inorganic pigments. Chemical compounds of the (Bi₂O₃)_1−x(Y₂O₃)_x type were synthesized. The host lattice of these pigments is Bi₂O₃ that is doped by Y³⁺ ions. The incorporation of doped ions provides the interesting colours and contributes to a growth of the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments. This paper also contains the results of the pigment characterization by X-ray powder diffraction and their colour properties.     

Thermal properties of Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–PbO–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glass system

Thermal behavior of xGa₂O₃–(50 − x)PbO–50P₂O₅ (x = 0, 10, 20, and 30 mol.% Ga₂O₃) and xGa₂O₃–(70 − x)PbO–30P₂O₅ (x = 0, 10, 20, 30, and 40 mol.% Ga₂O₃) glassy materials were studied by thermo-mechanical analysis (TMA) and differential thermal analysis (DTA). Replacement of PbO for Ga₂O₃ is accompanied by increasing glass-transition temperature (263 ≤ T _g/°C ≤ 535), deformation temperature (363 ≤ T _d/°C ≤ 672), crystallization temperature (396 ≤ T _c/°C ≤ 640) and decreasing of coefficient of thermal expansion (5.1 ≤ CTE/ppm K⁻¹ ≤ 16.7). Values of Hruby parameter were determined (0.1 ≤ K _H ≤ 1.3). The thermal stability of prepared glasses increases with increasing of concentration of Ga₂O₃.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

Physicochemical properties of (CH<Subscript>3</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>Cl–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

Composite solid electrolytes were synthesized from the organic salt dimethylammonium chloride (1–x)C₂H₈NCl–xAl₂O₃. Their physicochemical properties were studied. In the starting C₂H₈NCl salt, there is a phase transition at 39°C accompanied by an increase in conductivity by two orders of magnitude. The conductivity of the high-temperature phase is 9.3 × 10^–6 S/cm at 160°C. A differential scanning calorimetry study showed that the salt in the composites spreads over the oxide surface and at x > 0.6 the salt melting enthalpy decreases to zero. The conductivity of the resulting composites was studied by impedance spectroscopy. It was shown that heterogeneous doping leads to a sharp increase in ion conductivity to 7.0 × 10^–3 S/cm at 160°C and a decrease in the activation energy to 0.55 eV.