含碳硼烷半夹心型钴硫16电子化合物与二炔烃的反应性研究

含双硫取代碳硼烷二齿配体的半夹心型钴16电子化合物CpCo[S2C2(B10H10)](Co16e)分别与1,4-二乙炔基苯(L1)、(S)-2,2′-二乙酰氧基-6,6′-二乙炔基-1,1′-联萘(L2)、2-溴-5-乙炔基噻吩(L3)和2,5-二乙炔基噻吩(L4)反应,分别得到18电子单核化合物CpCo(S2C2B10H9)(H2CCPhC≡CH)(1),CpCo(S2C2B10H9)[H2CC(C24H16O4)C≡CH](2),CpCo(S2C2B10H9)[H2CC(C4H2S)Br](3),和CpCo(S2C2B10H9)[H2CC(C4H2S)C≡CH](4)。化合物1～4的结构中都发生了金属诱导B-H键活化并生成了新的C-B键。在Co16e与L4的反应中,还得到了两分子炔烃以头对头二聚插入到金属中心的18电子化合物CpCo(S2C2B10H9)[HC≡C(C4H2S)C=CH-CH=C(C4H2S)C≡CH](5)。上述化合物通过NMR、IR、MS、元素分析等方法进行表征。     

The electronic structures of diruthenium complexes containing an oligo(phenylene ethynylene) bridging ligand, and some related molecular structures

The complexes [{Cp'(L(2))Ru}C≡CC(6)H(4)C≡CC(6)H(2)(OMe)(2)C≡CC(6)H(4)C≡C{Ru(L(2))Cp'}](L(2) = (PPh(3))(2), Cp' = Cp; L(2) = dppe, Cp' = Cp*) in which the metal centres are bridged by an oligomeric phenylene ethynylene (OPE) ligand have been prepared and the electronic structure of these representative ruthenium-capped OPEs investigated using a combination of electrochemical, UV-vis-NIR and IR spectroelectrochemical methods, and DFT-based calculations. The diruthenium complexes are oxidised to the thermodynamically stable dications [Cp'Ru(L(2))C≡CC(6)H(4)C≡CC(6)H(2)(OMe)(2)C≡CC(6)H(4)C≡CRu(L(2))Cp'](2+), which on the basis of the spectroelectrochemical and computational results can be described in terms of two non-interacting Ru(C≡CAr)(L(2))Cp' moieties. X-ray structures of the oligophenyleneethynylene HC≡CC(6)H(4)C≡CC(6)H(2)(OMe)(2)C≡CC(6)H(4)C≡CH, the bis(gold) complex Ph(3)PAuC≡CC(6)H(4)C≡CC(6)H(2)(OMe)(2)C≡CC(6)H(4)C≡CAuPPh(3) and the precursor 1-ethynyl-4-(trimethylsilylethynyl)benzene are also reported.     

Synthesis and intramolecular and interionic structural characterization of half-sandwich (arene)ruthenium(II) derivatives of bis(pyrazolyl)alkanes

Arene ruthenium(II) complexes containing bis(pyrazolyl)methane ligands have been prepared by reacting the ligands L' (L' in general; specifically L(1) = H(2)C(pz)(2), L(2) = H(2)C(pz(Me2))(2), L(3) = H(2)C(pz(4Me))(2), L(4) = Me(2)C(pz)(2) and L(5) = Et(2)C(pz)(2) where pz = pyrazole) with [(arene)RuCl(mu-Cl)](2) dimers (arene = p-cymene or benzene). When the reaction was carried out in methanol solution, complexes of the type [(arene)Ru(L')Cl]Cl were obtained. When L(1), L(2), L(3), and L(5) ligands reacted with excess [(arene)RuCl(mu-Cl)](2), [(arene)Ru(L')Cl][(arene)RuCl(3)] species have been obtained, whereas by using the L(4) ligand under the same reaction conditions the unexpected [(p-cymene)Ru(pzH)(2)Cl]Cl complex was recovered. The reaction of 1 equiv of [(p-cymene)Ru(L')Cl]Cl and of [(p-cymene)Ru(pzH)(2)Cl]Cl with 1 equiv of AgX (X = O(3)SCF(3) or BF(4)) in methanol afforded the complexes [(p-cymene)Ru(L')Cl](O(3)SCF(3)) (L' = L(1) or L(2)) and [(p-cymene)Ru(pzH)(2)Cl]BF(4), respectively. [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) formed when [(p-cymene)Ru(L(1))Cl]Cl reacts with an excess of AgPF(6). The solid-state structures of the three complexes, [(p-cymene)Ru{H(2)C(pz)(2)}Cl]Cl, [(p-cymene)Ru{H(2)Cpz(4Me))(2)}Cl]Cl, and [(p-cymene)Ru{H(2)C(pz)(2)}Cl](O(3)SCF(3)), were determined by X-ray crystallographic studies. The interionic structure of [(p-cymene)Ru(L(1))Cl](O(3)SCF(3)) and [(p-cymene)Ru(L')Cl][(p-cymene)RuCl(3)] (L' = L(1) or L(2)) was investigated through an integrated experimental approach based on NOE and pulsed field gradient spin-echo (PGSE) NMR experiments in CD(2)Cl(2) as a function of the concentration. PGSE NMR measurements indicate the predominance of ion pairs in solution. NOE measurements suggest that (O(3)SCF(3))(-) approaches the cation orienting itself toward the CH(2) moiety of the L(1) (H(2)C(pz)(2)) ligand as found in the solid state. Selected Ru species have been preliminarily investigated as catalysts toward styrene oxidation by dihydrogen peroxide, [(p-cymene)Ru(L(1))(H(2)O)][PF(6)](2) being the most active species.     

Mixed-valent diruthenium half-sandwich complexes containing two chelating 1,2-dicarba-closo-dodecaborane-1,2-dithiolate ligands: reactivity towards phenylacetylene, 1,4-diethynylbenzene, and ethynylferrocene

Treatment of 1a and 1b with phenylacetylene, 1,4-diethynylbenzene, and ethynylferrocene affords addition complexes, (p-cymene)Ru(mu-E2)Ru(S2C2B10H10)2(R1C=CR2), (R1 = Ph (H), R2 = H (Ph), 2a, 2b, 3a, 3b; R1 = -Ph-C[triple bond]CH (H), R2 = H (-Ph-C[triple bond]CH), 4a, 4b, 5a, 5b; R1 = Fc (H), R2 = H (Fc), 6a, 6b, 7a, 7b). Alkyne addition occurs at sulfur atoms of two different chelating 1,2-dicarba-closo-dodecaborane-1,2-dithiolate ligands that leads to a change of 16e Ru(IV) in 1a and 1b to 18e Ru(II) in 2a-7a and 2b-7b, respectively. Moreover, the reaction of 1a with ethynylferrocene produces an unprecedented tetranuclear mixed-valent Ru(IV)Ru(II)3S12 cluster (8a) consisting of two 1a and one ethynylferrocene through the cleavage and generation of Ru-S, S-S, and C-S bonds. The complexes were characterized by IR, MS, and NMR spectroscopy and microanalysis. X-ray structural analyses were performed on 1b, 2a, 3b, 5a, 5b, 7b, and 8a.     

Probing the effects of ligand structure on activity and selectivity of Cr(III) complexes for ethylene oligomerisation and polymerisation

A series of distorted octahedral Cr(III) complexes containing tridentate S-, S/O- or N-donor ligands comprised of three distinct architectures: facultative {S(CH(2)CH(2)SC(10)H(21))(2) (L(1)) and O(CH(2)CH(2)SC(10)H(21))(2) (L(2))}, tripodal {MeC(CH(2)S(n)C(4)H(9))(3) (L(3)), MeC(CH(2)SC(10)H(21))(3) (L(4))} and macrocyclic {(C(10)H(21))[9]aneN(3) (L(5)), (C(10)H(21))(3)[9]aneN(3) (L(6)), with [9]aneN(3)=1,4,7-triazacyclononane} are reported and characterised spectroscopically. Activation of [CrCl(3)(L)] with MMAO produces very active ethylene trimerisation, oligomerisation and polymerisation catalysts, with significant dependence of the product distribution upon the ligand type present. The properties of the parent [CrCl(3)(L)] complexes are probed by cyclic voltammetry, UV-visible, EPR, EXAFS and XANES measurements, and the effects upon activation with Me(3)Al investigated similarly. Treatment with excess Me(3)Al leads to substitution of Cl ligands by Me groups, generation of an EPR silent Cr species (consistent with a change in the oxidation state of the Cr to either Cr(II) or Cr(IV)) and substantial dissociation of the neutral S and S/O-donor ligands.     

Controlled assembly of ruthenium complexes through ortho-carborane dithiolate and polysulfide ligands

Treatment of ortho-carborane, n-butyl lithium, sulfur, and [(p-cymene)RuCl(2)](2) in varying ratio led to four new compounds (p-cymene)Ru[S(3)(C(2)B(10)H(10))(2)] (3), [(p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10))](2) (4), [(p-cymene)Ru](2)Ru(μ(2)-η(2):η(2)-S(2)) (μ(2)-η(2):η(1)-S(2)Cl)(μ(2)-S(2)C(2)B(10)H(10))(2) (5), and [(p-cymene)Ru](2)Ru(μ(2)-η(1):η(1)-S(2))(μ(3)-η(2):η(2)-S(4)) (μ(2)-S(2)C(2)B(10)H(10))(2) (6), respectively. In 3, the ruthenium atom is coordinated by three S atoms from a in situ generated tridentate [S(3)(C(2)B(10)H(10))(2)](2-) ligand. 4 consists of two identical dinuclear (p-cymene)Ru(2)(μ(2)-S(2)C(2)B(10)H(9))(μ(3)-S(2)C(2)B(10)H(10)) subunits which connect to each other via the Ru-Ru bond and two bridging o-carborane-1,2-dithiolate ligands. In 4, a Ru-B bond is present. 5 contains a Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(2)-S(2)Cl) core, and the central ruthenium atom is coordinated by seven S atoms in a distorted pentagonal bipyramidal geometry. In 5, a S-Cl bond is generated. 6 has a novel Ru(3)(μ(2)-S)(2)(μ(2)-S(2))(μ(3)-S(4)) core, and the three ruthenium atoms are connected through the two terminal sulfur atoms of the S-S-S-S chain in a μ(3) binding fashion. All the four complexes have been characterized by elemental analysis, mass, NMR, and X-ray crystallography.     

Reactions of 16e CpCo half-sandwich complexes containing a chelating 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolate ligand with ethynylferrocene and dimethyl acetylenedicarboxylate

The reaction of the 16e half-sandwich complex [CpCo(S2C2B10H10)] (1S; Cp: cyclopentadienyl) with ethynylferrocene in CH2Cl2 at ambient temperature leads to [CpCo(S2C2B10H9)-(CH2CFc)] (2S; Fc: ferrocenyl) and 1,2,4-triferrocenylbenzene. In 2S, B substitution occurs at the carborane cage in the position B3/B6 with the formation of a C-B bond. In the presence of the protic solvent MeOH, 2S loses a CpCo fragment to generate [(CH2CFc)(S2C2B10H9)] (3S). On the other hand, 2S can take a free CpCo fragment to form [(CpCo)2(S2C2B9H8)-(CHCFc)] (4S) containing a nido-C2B9 unit. In sharp contrast, [CpCo-(Se2C2B10H10)] (1Se) does not react with the alkyne in CH2Cl2, but in MeOH [(CHCFc)(Se2C2B10H10)] (5Se) is generated without the presence of a CpCo unit. The reaction of 1 with dimethyl acetylenedicarboxylate at ambient temperature leads to insertion compounds [CpCo(E2C2B10H10){(MeO2C)-C=C(CO2Me)}] (6S, E=S; 6 Se, E=Se). Upon heating, 6S rearranges to two geometrical isomers [CpCo(S2C2B10H9){(MeO2C)C=CH(CO2Me)}] (7S) and [CpCo(S2C2B10H9){(MeO2C)-CHC(CO2Me)}] (8S). In both, B-H functionalization takes place at the carborane cage in the position B3/B6, but 7S is a 16e complex with an olefinic unit in a Z configuration, and 8S is an 18e complex containing an alkyl B-CH group. Further treatment of 7 S with dimethyl acetylenedicarboxylate at ambient temperature affords two B-disubstituted complexes at the carborane cage in the positions of the B3 and B6 sites, that is, [CpCo(S2C2-B10H8){(MeO2C)C=CH(CO2Me)}2] (9S) and [CpCo(S2C2B10H8){(MeO2C)-CHC(CO2Me)}{(MeO2C)C=CH-(CO2Me)}] (10S). Compound 9S is a 16e complex with two olefinic units in E/E configurations, whereas 10S is an 18e species containing both an olefinic substituent and an alkyl B--CH unit. The reaction of 7S with methyl acetylenemonocarboxylate at ambient temperature leads to the sole 16e compound [CpCo(S2C2B10H8){CH=CH(CO2Me)}-{(MeO2C)C=CH(CO2Me)}] (11S). In contrast, 6Se does not rearrange. All new complexes 2S-4S, 5Se, 6Se, and 7S-11S were characterized by NMR spectroscopy (1H, 11B, 13C) and X-ray structural analyses were performed for 2S-4S, 5Se, 6Se, and 7S-9S.     

New palladium-catalyzed cross-coupling routes to carbon functionalized metallatricarbadecaboranes

A general method for the synthesis of cage-carbon-functionalized cyclopentadienyl iron and cyclopentadienyl ruthenium tricarbadecaboranyl complexes has been developed that employs palladium-catalyzed Sonogashira, Heck, and Stille cross-coupling reactions directed at a cage-carbon haloaryl substituent. The key Li(+)[6-(p-XC(6)H(4))-nido-5,6,9-C(3)B(7)H(9)(-)] (X = I (1), Br (2), Cl (3)) haloaryl-tricarbadecaboranyl anionic ligands were synthesized in high yields via the reaction of the arachno-4,6-C(2)B(7)H(12)(-) anion with the corresponding p-halobenzonitriles (p-XC(6)H(4)-CN). The reactions of the salts 1-3 with (η(5)-C(5)H(5))Fe(CO)(2)I and (η(5)-C(5)H(5))Ru(CH(3)CN)(3)PF(6) were then used to produce the haloaryl complexes 1-(η(5)-C(5)H(5))-2-(p-XC(6)H(4))-closo-1,2,3,4-MC(3)B(7)H(9) (M = Fe, X = I (4), Br (5), Cl (6) and M = Ru, X = I (7), Br (8), Cl (9)). The sonication-promoted Sonogashira coupling reactions of 4 with terminal alkynes catalyzed by Pd(dppf)(2)Cl(2)/CuI yielded the alkynyl-linked derivatives 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhC≡C)- (10), (CH(3)CH(2)C(O)OCH(2)C≡C)- (11), ((η(5)-C(5)H(5))Fe(η(5)-C(5)H(4)C≡C))- (12)). Heck reactions of 4 with terminal alkenes catalyzed by Pd(OAc)(2) yielded the alkene-functionalized products 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = (PhCH(2)CH═CH)- (13), (CH(3)(CH(2))(2)CH═CH)- (14)), while the Stille cross-coupling reactions of 4 with organotin compounds catalyzed by Pd(PPh(3))(2)Cl(2) afforded the complexes 1-(η(5)-C(5)H(5))-2-p-RC(6)H(4)-closo-1,2,3,4-FeC(3)B(7)H(9) (R = Ph- (15), (CH(2)═CH)- (16), (CH(2)═CHCH(2))- (17)). These reactions thus provide facile and systematic access to a wide variety of new types of functionalized metallatricarbadecaboranyl complexes with substituents needed for potential metallocene-like biomedical and/or optoelectronic applications.     

Metal-induced B-H activation: addition of acetylene, propyne, or 3-methoxypropyne to Rh(Cp*), Ir(Cp*), Ru(p-cymene), and Os(p-cymene) half-sandwich complexes containing a chelating 1,2-dicarba-closo-dodecaborane-1,2-dichalcogenolato ligand

The addition reactions of the 16e half-sandwich complexes [M(eta5-Cp*)[E2C2(B10H10)]] (Cp*=pentamethylcyclopentadienyl: 1S: E=S, M=Rh; 2S: E=S; M=Ir; 2Se: E=Se, M=Ir) and [M(eta6-p-cymene)[S2C2(B10H10)]] (p-cymene=4-isopropyltoluene; 3S: M=Ru; 4S: M=Os), with acetylene, propyne, and 3-methoxypropyne lead to the 18e complexes 5-19 with a metal-boron bond in each case. The reactions start with an insertion of the alkyne into one of the metal-chalcogen bonds, followed by B-H activation, transfer of one hydrogen atom from the carborane via the metal to the terminal carbon of the alkyne, and concomitant ortho-metalation of the carborane. The E-eta2-CC and the C(1)B units are arranged either cisoid or transoid at the metal. X-ray structural analyses are reported for one of the starting 16e complexes (4S), the cisoid complex 12S (from 2S and HC[triple bond]C-CH3), and the transoid complexes 9S and 14S (from 1S and HC[triple bond]C-CH2OMe, and from 3S and HC[triple bond]CH, respectively). All new complexes 5-19 were characterized by NMR spectroscopy (1H, 11B, 13C, and 77Se and 103Rh NMR spectroscopy when appropriate).     

Synthesis and Characterization of a New Alkenyldecaborane and Alkenyl Monocarbon Carboranes

Decaborane(14) reacts with 1-(CH(3))(3)SiC&tbd1;CC(4)H(9) in the presence of dimethyl sulfide to give the new alkenyldecaborane 5-(S(CH(3))(2))-6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11) (I). Crystal data for 5-(S(CH(3))(2))-6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11): space group P2(1)/n, monoclinic, a = 9.471(1) ?, b = 13.947(3) ?, c = 17.678(3) ?, beta = 100.32(1) degrees. A total of 3366 unique reflections were collected over the range 2.0 degrees /= 3sigma(F(o)(2)) and were used in the final refinement. R(F)() = 0.083; R(w)(F)() = 0.094. The single-crystal X-ray structure of 5-(S(CH(3))(2))-6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11) (A) is also reported. Crystal data for 5-(S(CH(3))(2))-6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11): space group, P2(1)2(1)2(1), orthorhombic, a = 9.059 (3) ?, b = 12.193(4) ?, c = 21.431(3) ?. A total of 4836 unique reflections were collected over the range 6 degrees /= 3sigma(F(o)(2)) and were used in the final refinement. R(F)() = 0.052; R(w)(F)() = 0.059. The reactions of 5-(S(CH(3))(2))6-[(CH(3))(3)Si(C(4)H(9))C=CH]B(10)H(11) and 5-(S(CH(3))(2))6-[((CH(3))(3)Si)(2)C=CH]B(10)H(11) with a variety of alkyl isocyanides were investigated. All of the alkenyl monocarbon carboranes reported are the result of incorporation of the carbon atom from the isocyanide into the alkenyldecaborane framework and reduction of N&tbd1;C bond to a N-C single bond. The characterization of these compounds is based on (1)H and (11)B NMR data, IR spectroscopy, and mass spectrometry.     

Preparation, structure, and ethylene polymerization behavior of half-sandwich picolyl-functionalized carborane iridium, ruthenium, and rhodium complexes

The synthesis of half-sandwich transition-metal complexes containing the Cab(N) and Cab(N,S) chelate ligands (HCab(N) = HC2B10H10CH2C5H4N (1), LiCab(N,S) = LiSC2B10H10CH2C5H4N (4)) is described. Compounds 1 and 4 were treated with chloride-bridged dimers [{Ir(Cp*)Cl2}2] (Cp* = eta5-C5Me5), [{Ru(p-cymene)Cl2}2] and [{Rh(Cp*)Cl2}2] to give half-sandwich complexes [Ir(Cp*)Cl(Cab(N))] (2), [Ru(p-cymene)Cl(Cab(N))] (3), and [Rh(Cp*)Cl(Cab(N,S))] (5), respectively. Addition reaction of LiCab(S) (Cab(S) = SC2(H)B10H10) to the rhodium complex 5 yields [Rh(Cp*)(Cab(S))(Cab(N,S))] (6). All the complexes were characterized by IR and NMR spectroscopy, and by elemental analysis. In addition, X-ray structure analyses were performed on complexes 2, 3, 5, and 6, in which the potential C,N- and N,S-chelate ligands were found to coordinate in a bidentate mode. The carborane complex 2 shows catalytic activities up to 3.7x10(5) g PE mol(-1) Ir h(-1) for the polymerization of ethylene in the presence of methylaluminoxane (MAO) as cocatalyst. The polymer obtained from this homogeneous catalytic reaction has a spherical morphology. Catalytic activities and the molecular weight of polyethylene have been investigated for various reaction conditions.     

Preparation and structure of mono- and binuclear half-sandwich iridium, ruthenium, and rhodium carbene complexes containing 1,2-dichalcogenolao 1,2-dicarba-closo-dodecaboranes

The synthesis of half-sandwich transition metal complexes containing both 1,2-dichalcogenolato-1,2-dicarba-closo-docecaborane (Cab(E,E)) [Cab(E,E)=E(2)C(2)(B(10)H(10)); E = S, Se] and N-heterocyclic carbene (NHC) ligands is described. Addition of mono-NHC ligand to the 16e half-sandwich dichalcogenolato carborane complexes [Cp*Rh(Cab(E,E))], [Cp*Ir(Cab(S,S))], [(p-cymene)Ru(Cab(S,S))] (Cp* = pentamethylcyclopentadienyl) gives corresponding mononuclear 18e dithiolate complexes of the type [LM(Cab(E,E))(NHC)]: [Cp*M(Cab(S,S))(1-ethenyl-3-methylimidazolin-2-ylidene)] (M = Ir (2), Rh (3)), [Cp*Rh(Cab(E,E))(3-methyl-1-picolyimidazolin-2-ylidene)] [E = S (6), Se (7)], [(p-cymene)Ru(Cab(S,S))(NHC)] [NHC = 1-ethenyl-3-methylimidazolin-2-ylidene (4), 3-methyl-1-picolyimidazolin-2-ylidene (8)], whereas bis-NHC give centrosymmetric binuclear complexes [{Cp*M(Cab(S,S))}(2)(1,1'-dimethyl-3,3'-methylene(imidazolin-2-ylidene))] [M = Rh (10), Ir (11)]. The complexes were characterized by IR, NMR spectroscopy and elemental analysis. In addition, X-ray structure analyses were performed on complexes 2-4, 6, 8, 10 and 11.     

Synthesis, characterization, and dynamic studies of 12-vertex eta5-ruthenium(II) closo-phosphine complexes with monoanionic [10-L-nido-7-R-7,8-C2B9H9]- ligands

Ruthenacarborane complexes of formula [3-H-3,3-(PPh3)2-8-L-closo-3,1,2-RuC2B9H10)] (L = SMe2 (2a), SEt2 (2b), S(CH2)4 (2c), SEtPh (2d)) and [1-Me-3-H-3,3-(PPh3)2-8-L-closo-3,1,2-RuC2B9H9)] (L = SMe2 (2e), SEt2 (2f)) were prepared by reaction of the respective monoanionic charge-compensated ligands [10-L-nido-7,8-C2B9H10]- and [7-Me-10-L-nido-7,8-C2B9H9]- with [RuCl2(PPh3)3]. Similary, complexes [3-H-3,3,8-(PPh3)3-closo-3,1,2-RuC2B9H10)] (4a) and [3-H-3,3-(PPh3)2-8-PPh2Me-closo-3,1,2-RuC2B9H10)] (4b) were prepared from the corresponding phosphonium ligands. The reaction is done in one pot by reacting the ligand with the Ru(II) complex in a 1.5:1 ratio. All compounds have been fully characterized by multinuclear NMR spectroscopy, and the molecular structures for 2a and 4a have been elucidated by single-crystal X-ray diffraction analysis. The Ru(II) atom in this complex is on the open face of the monoanionic charge-compensated ligand adopting a pseudooctahedral coordination. Formally, three positions are supplied by the C2B3 open face, two PPh3 groups occupy two other positions, and a hydride fulfills the remaining one. The hydride complexes were generated with no special reagent. They result from a dehalogenation in the presence of ethanol.     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

Synthesis and structure of heterometallic complexes (RhFe, CoFe) containing bridging 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolato ligands

The prototype hetero-binuclear complexes containing metal-metal bonds, {CpRh[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(5a), Se(5b); Cp = Cp = eta 5-1,3-tBu2C5H3, E = S(6a), Se(6b)) and {CpCo[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(7a), Se(7b); Cp = Cp = eta 5-C5H5, E = S(8a), Se(8b)) were obtained from the reactions of 16-electron complexes CpRh[E2C2(B10H10)] (Cp = Cp*, E = S(1a), Se(1b); Cp = Cp, E = S(2a), Se(2b)), CpCo[E2C2(B10H10)] (Cp = Cp*, E = S(3a), Se(3b); Cp = Cp, E = S(4a), Se(4b)) with Fe(CO)5 in the presence of Me3NO. The molecular structures of {Cp*Rh[E2C2(B10H10)]}[Fe(CO)3] (E = S(5a), Se(5b)), {CpRh[S2C2(B10H10)]}[Fe(CO)3] (6a) {Cp*Co[S2C2(B10H10)]}[Fe(CO)3] (7a) and {CpCo[S2C2(B10H10)]}[Fe(CO)3] (8a) have been determined by X-ray crystallography. All these complexes were characterized by elemental analysis and IR and NMR spectra.     

半夹芯16电子化合物CpCo(S2C2B10H10)中B(3,6)位的选择性分步取代反应

16e半夹芯化合物CpCo(S2C2B10H10)(Cp:cyclopentadienyl)(1)与炔烃HC≡CC(O)Fc(Fc:ferrocenyl)在物质的量之比为1∶1时反应生成化合物CpCo(S2C2B10H9)(CH=CHC(O)Fc)(2)。在化合物2中,一分子HC≡CC(O)Fc偶合到原料化合物1的碳硼烷笼子的B(3)位点,导致B(3)位的氢原子迁移到炔烃的内部碳原子上形成烯烃取代基。2能继续与另外一分子HC≡CC(O)Fc反应,生成B-双取代产物CpCo(S2C2B10H8)(CH=CHC(O)Fc)2(3)。3仍然是1个16e化合物,并且在B(3,6)位点有2个反式烯烃取代基CH=CHC(O)Fc。在过量炔烃存在情况下,该反应生成化合物3及炔烃环三聚产物1,3,5-{HC=CC(O)Fc}3(4)。化合物2、3、4用红外,核磁,元素分析,质谱和单晶X-射线衍射分析等方法进行了表征。     

Dithiocarboxylate complexes of ruthenium(II) and osmium(II)

The ruthenium(II) complexes [Ru(R)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh) are formed on reaction of IPr·CS(2) with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] (BTD = 2,1,3-benzothiadiazole) or [Ru(C(C≡CPh)=CHPh)Cl(CO)(PPh(3))(2)] in the presence of ammonium hexafluorophosphate. Similarly, the complexes [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)](+) are formed in the same manner when ICy·CS(2) is employed. The ligand IMes·CS(2) reacts with [Ru(R)Cl(CO)(BTD)(PPh(3))(2)] to form the compounds [Ru(R)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) (R = CH=CHBu(t), CH=CHC(6)H(4)Me-4, C(C≡CPh)=CHPh). Two osmium analogues, [Os(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) and [Os(C(C≡CPh)=CHPh)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+) were also prepared. When the more bulky diisopropylphenyl derivative IDip·CS(2) is used, an unusual product, [Ru(κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IDip)Cl(CO)(PPh(3))(2)](+), with a migrated vinyl group, is obtained. Over extended reaction times, [Ru(CH=CHC(6)H(4)Me-4)Cl(BTD)(CO)(PPh(3))(2)] also reacts with IMes·CS(2) and NH(4)PF(6) to yield the analogous product [Ru{κ(2)-SC(H)S(CH=CHC(6)H(4)Me-4)·IMes}Cl(CO)(PPh(3))(2)](+)via the intermediate [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IMes)(CO)(PPh(3))(2)](+). Structural studies are reported for [Ru(CH=CHC(6)H(4)Me-4)(κ(2)-S(2)C·IPr)(CO)(PPh(3))(2)]PF(6) and [Ru(C(C≡CPh)=CHPh)(κ(2)-S(2)C·ICy)(CO)(PPh(3))(2)]PF(6).     

Framework fluxionality of organometallic oxides: synthesis, crystal structure, EXAFS, and DFT studies on [[Ru(eta6-arene)]4Mo4O16] complexes

Reactions of the molybdates Na(2)MoO4.2 H2O and (nBu(4)N)2[Mo2O7] with [[Ru(arene)Cl(2)](2)] (arene=C(6)H5CH3, 1,3,5-C6H3(CH3)(3), 1,2,4,5-C6H2(CH3)4) in water or organic solvents led to formation of the triple-cubane organometallic oxides [[Ru(eta(6)-arene)](4)Mo4O16], whose crystal and molecular structures were determined. Refluxing triple cubane [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] in methanol caused partial isomerization to the windmill form. The two isomers of [[Ru(eta(6)-C6H5CH3)](4)Mo4O16] were characterized by Raman and Mo K-edge X-ray absorption spectroscopy (XAS), both in the solid-state and in solution. This triple-cubane isomer was also used as a spectroscopic model to account for isomerization of the p-cymene windmill [[Ru(eta(6)-1,4-CH3C6H4CH(CH3)2)](4)Mo4O16] in solution. Using both Raman and XAS techniques, we were then able to determine the ratio between the windmill and triple-cubane isomers in dichloromethane and in chloroform. Density functional calculations on [[Ru(eta(6)-arene)](4)Mo4O16] (arene=C6H6, C6H5CH3, 1,3,5-C6H3(CH3)3, 1,4-CH3C6H4CH(CH3)2, C6(CH3)6) suggest that the windmill form is intrinsically more stable, provided the complexes are assumed to be isolated. Intramolecular electrostatic interactions and steric bulk induced by substituted arenes were found to modulate but not to reverse the energy difference between the isomers. The stability of the triple-cubane isomers should therefore be accounted for by effects of the surroundings that induce a shift in the energy balance between both forms.     

Ruthenium tris(pyrazolyl)borate diazo complexes: preparation of aryldiazenido, aryldiazene, and hydrazine derivatives

Tris(pyrazolyl)borate aryldiazenido complexes [RuTpLL'(ArN(2))](BF(4))(2) (1-3) [Ar = C(6)H(5), 4-CH(3)C(6)H(4); Tp = hydridotris(pyrazolyl)borate; L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were prepared by allowing dihydrogen [RuTp(eta(2)-H(2))LL'](+) derivatives to react with aryldiazonium cations. Spectroscopic characterization (IR, (15)N NMR) using the (15)N-labeled derivatives strongly supports the presence of a linear [Ru]-NN-Ar aryldiazenido group. Hydrazine complexes [RuTp(RNHNH(2))LL']BPh(4) (4-6) [R = H, CH(3), C(6)H(5), 4-NO(2)C(6)H(4); L = P(OEt)(3) or PPh(OEt)(2), L' = PPh(3); L = L' = P(OEt)(3)] were also prepared by reacting the [RuTp(eta(2)-H(2))LL'](+) cation with an excess of hydrazine. The complexes were characterized spectroscopically (IR and NMR) and by X-ray crystal structure determination of the [RuTp(CH(3)NHNH(2))[P(OEt)(3)](PPh(3))]BPh(4) (4d) derivative. Tris(pyrazolyl)borate aryldiazene complexes [RuTp(ArN=NH)LL']BPh(4) (7-9) (Ar = C(6)H(5), 4-CH(3)C(6)H(4)) were prepared following three different methods: (i). by allowing hydride species RuHTpLL' to react with aryldiazonium cations in CH(2)Cl(2); (ii). by treating aryldiazenido [RuTpLL'(ArN(2))](BF(4))(2) with LiBHEt(3) in CH(2)Cl(2); (iii). by oxidizing arylhydrazine [RuTp(ArNHNH(2))LL']BPh(4) complexes with Pb(OAc)(4) in CH(2)Cl(2) at -30 degrees C. Methyldiazene complexes [RuTp(CH(3)N=NH)LL']BPh(4) were also prepared by the oxidation of the corresponding methylhydrazine [RuTp(CH(3)NHNH(2))LL']BPh(4) with Pb(OAc)(4).     

Synthesis and characterization of heterobimetallic oxo-bridged aluminum-rare earth metal complexes

Reaction of the aluminum hydroxide LAl(OH)[C(Ph)CH(Ph)] (1, L = HC[(CMe)(NAr)](2), Ar = 2,6-iPr(2)C(6)H(3)) with Y(CH(2)SiMe(3))(3)(THF)(2) yielded the oxo-bridged heterobimetallic yttrium dialkyl complex LAl[C(Ph)CH(Ph)](μ-O)Y(CH(2)SiMe(3))(2)(THF)(2) (2). Alkane elimination reaction of 2 with 2-(imino)pyrrole [NN]H ([NN]H = 2-(ArN═CH)-5-tBuC(4)H(2)NH) afforded the yttrium monoalkyl complex LAl[C(Ph)CH(Ph)] (μ-O)Y(CH(2)SiMe(3))[NN](THF)(2) (5). Alternatively, 5 can be prepared in high yield by reaction of 1 with [NN]Y(CH(2)SiMe(3))(2)(THF)(2) (3). The analogous samarium alkyl complex LAl[C(Ph)CH(Ph)](μ-O)Sm(CH(2)SiMe(3))[NN](THF)(2) (6) was prepared similarly. Reactions of 5 and 6 with 1 equiv of iPrOH yielded the corresponding alkoxyl complexes 7 and 8, respectively. The molecular structures of 3, 6, and 8 have been determined by X-ray single-crystal analysis. Complexes 2, 3, 5, 7, and 8 have been investigated as lactide polymerization initiators. The heterobimetallic alkoxyl 8 is highly active to yield high molecular weight (M(n) = 6.91 × 10(4)) polylactides with over 91% conversion at the lactide-to-initiator molar ratio of 2000.