钌、铑金属配合物在DNA中介的电子传递与错配碱基识别中的应用

化学家设计合成了一系列能通过插入方式与DNA结合的金属配合物,应用于研究有关以DNA为中介的电子传递,发现碱基对不仅是电子传递的媒介,而且自身能作为电子受体,形成长程氧化损坏.本文总结了近年来该领域的研究进展,同时也介绍了金属配合物对错配碱基识别的研究成果.     

Charge Transfer Chromophores Derived from 3d-Row Transition Metal Complexes

A series of new charge transfer (CT) chromophores of “α-diimine-M^II-catecholate” type (where M is 3d-row transition metals—Cu, Ni, Co) were derived from 4,4′-di-tert-butyl-2,2′-bipyridyl and 3,6-di-tert-butyl-o-benzoquinone (3,6-DTBQ) in accordance with three modified synthetic approaches, which provide high yields of products. A square-planar molecular structure is inherent for monomeric [Cu^II(3,6-Cat)(bipy^tBu)]∙THF (1) and Ni^II(3,6-Cat)(bipy^tBu) (2) chromophores, while dimeric complex [Co^II(3,6-Cat)(bipy^tBu)]₂∙toluene (3) units two substantially distorted heteroleptic D-M^II-A (where D, M, A are donor, metal and acceptor, respectively) parts through a donation of oxygen atoms from catecholate dianions. Chromophores 1–3 undergo an effective photoinduced intramolecular charge transfer (λ = 500–715 nm, extinction coefficient up to 10⁴ M⁻¹·cm⁻¹) with a concomitant generation of a less polar excited species, the energy of which is a finely sensitive towards solvent polarity, ensuring a pronounced negative solvatochromic effect. Special attention was paid to energetic characteristics for CT and interacting HOMO/LUMO orbitals that were explored by a synergy of UV-vis-NIR spectroscopy, cyclic voltammetry, and DFT study. The current work sheds light on the dependence of CT peculiarities on the nature of metal centers from various groups of the periodic law. Moreover, the “α-diimine-M^II-catecholate” CT chromophores on the base of “late” transition elements with differences in d-level’s electronic structure were compared for the first time.     

New Designs for Phototherapeutic Transition Metal Complexes

In this Minireview, we highlight recent advances in the design of transition metal complexes for photodynamic therapy (PDT) and photoactivated chemotherapy (PACT), and discuss the challenges and opportunities for the translation of such agents into clinical use. New designs for light‐activated transition metal complexes offer photoactivatable prodrugs with novel targeted mechanisms of action. Light irradiation can provide spatial and temporal control of drug activation, increasing selectivity and reducing side‐effects. The photophysical and photochemical properties of transition metal complexes can be controlled by the appropriate choice of the metal, its oxidation state, the number and types of ligands, and the coordination geometry.     

Experimental Charge Density Studies of Cyclotetrasilazane and Metal Complexes Containing the Di‐ and Tetraanion

The homologous series of parent octamethylcyclotetrasilazane (c‐NH‐SiMe₂‐)₄, ( 1 ), the lithium complex [(THF)₂Li₂(c‐N‐SiMe₂‐NH‐SiMe₂‐)₂]₂, ( 2 ), containing the cyclic dianion, and [(THF)₂LiAl(c‐N‐SiMe₂‐)₄]₂, ( 3 ), accommodating the unprecedented tetraanion [Me₂SiN]^4‐ was synthesized to investigate the nature of the covalent Si‐N single bond in the presence of various metals. These model compounds show a wide diversity of Si‐N(H), Si‐N(M), Si‐N(H, M) and M‐N bonds and serve as bench‐mark systems to study polar bonds by high‐resolution low‐temperature X‐ray structure analysis. Experimental charge density studies reveal highly polar Si‐N bonds with remarkable ionic contribution, even in the non‐metallated starting material 1 . The Li‐N and Li‐O bonds have to be classified as almost purely ionic bonds with topological properties not far from those determined for NaCl.     

Carboxy-substituted Phthalocyanine Metal Complexes

Metal complexes of carboxy-substituted phthalocyanines differing in the number of carboxy groups and their positions and those having carboxy groups together with other substituents were synthesized, and their spectral and some other properties were studied.     

聚类卟啉金属配合物

为模拟天然卟啉所具有的特殊生理活性,结构与性能各异的多种金属卟啉被合成并应用于许多领域。实际上,天然金属卟啉是在特定天然高分子-蛋白质营造的空穴中才能发挥其独特的性质,因此,类卟啉金属配合物的高分子化逐渐受到关注,并在载氧、催化、导电等领域取得重要成果。基于结合方式不同,高分子类卟啉金属配合物可分为高分子担载类卟啉金属配合物与聚类卟啉金属配合物。其中,后者以稳定的类卟啉环作为高分子链,不但使高分子骨架稳定,而且活性中心与类卟啉金属配合物之间有效间隔,同时活性中心相对密集,使其表现出较高的稳定性与活性。线形与平面型聚金属卟啉与金属酞菁表现出良好的导电性与催化活性;手性Salen席夫碱易于聚合得到线形或网状聚Salen希夫碱金属配合物,其表现出较强的催化活性、高ee值和可循环性。异双核聚类卟啉金属配合物也表现出较强的催化活化分子氧性能。     

Perovskite Light-Emitting Electrochemical Cells Employing Electron Injection/Transport Layers of Ionic Transition Metal Complexes

Recently, perovskites have attracted intense attention due to their high potential in optoelectronic applications. Employing perovskites as the emissive materials of light-emitting electrochemical cells (LECs) shows the advantages of simple fabrication process, low-voltage operation, and compatibility with inert electrodes, along with saturated electroluminescence (EL) emission. Unlike in previously reported perovskite LECs, in which salts are incorporated in the emissive layer, the ion-transport layer was separated from the emissive layer in this work. The layer of ionic transition metal complex (iTMC) not only provides mobile ions but also serves as an electron-injection/transport layer. Orthogonal solvents are used in spin coating to prevent the intermixing of stacked perovskite and iTMC layers. The blue iTMC with high ionization potential is effective in blocking holes from the emissive layer and thus ensures EL color saturation. In addition, the carrier balance of the perovskite/iTMC LECs can be optimized by adjusting the iTMC layer thickness. The optimized external quantum efficiency of the CsPbBr₃/iTMC LEC reaches 6.8 %, which is among the highest reported values for perovskite LECs. This work successfully demonstrates that, compared with mixing all components in a single emissive layer, separating the layer of ion transport, electron injection and transport from the perovskite emissive layer is more effective in adjusting device carrier balance. As such, solution-processable perovskite/iTMC LECs open up a new way to realize efficient perovskite LECs.     

蒽类衍生物的电荷传输性质

以具有较高迁移率的对称取代类蒽的衍生物{2,6-二[2-(4-戊基苯基)乙烯基]蒽,DPPVAnt;2,6-二-噻吩蒽,DTAnt;2,6-二[2-己基噻吩]蒽,DHTAnt}为研究对象,采用密度泛函理论的B3LYP方法,在6-31G(d)的基组水平上研究了三种蒽类衍生物的分子结构、电子结构、重组能和电荷传输积分,采用Einstein关系式计算了室温下的载流子迁移率,并与蒽的相关计算结果进行了比较.DPPVAnt是较好的空穴传输材料,其空穴迁移率为0.49cm2·V-1·s-1;DHTAnt有利于电子传输,其电子迁移率为0.12cm2·V-1·s-1;而DTAnt是一种较好的双极性材料,其空穴迁移率和电子迁移率分别为0.069和0.060cm2·V-1·s-1.计算得到的迁移率与实验结果处于同一数量级.三种蒽类衍生物的电子重组能与蒽的相近,而空穴重组能均大于蒽的空穴重组能,大小顺序为蒽DPPVAntDTAntDHTAnt.这与计算的迁移率结果不一致,说明分子的堆积结构决定材料的电荷传输性质.     

Effects of cis/trans-Configuration and Ligand Substitution of the Cyanidometal Bridge on Metal to Metal Charge Transfer Properties in Mixed Valence Complexes

To investigate the effects of cis/trans-configuration of the cyanidometal bridge and the electron donating ability of the auxiliary ligand on the cyanidometal bridge on metal to metal charge transfer (MMCT) in cyanidometal-bridged mixed valence compounds, two groups of trinuclear cyanidometal-bridged compounds cis/trans-[Cp(dppe)Fe(μ-NC)Ru(4,4’-dmbpy)₂(μ-CN)Fe(dppe)Cp][PF₆]_n (n=2 ( cis/trans - 1[PF₆]₂ ), 3 ( cis/trans - 1[PF₆]₃ ), 4 ( cis/trans - 1[PF₆]₄ )) and cis/trans-[Cp(dppe)Fe(μ-NC)Ru(bpy)₂(μ-CN)Fe(dppe)Cp][PF₆]₃ ( cis/trans - 2[PF₆]₃ ) were synthesized and fully characterized. The experimental results indicate that for these one- and two-electron oxidation mixed valence compounds, the trans-configuration compounds are more beneficial for MMCT than the cis-configuration compounds, and increasing the electron donating ability of the auxiliary ligand on the cyanidometal bridge is also conductive to MMCT. Moreover, compounds cis/trans - 1[PF₆]_n (n=3, 4) and cis/trans - 2[PF₆]₃ belong to localized compounds by analyzing the experimental characterization results, supported by the TDDFT calculations.     

靛红掺杂聚吡咯膜修饰电极的电荷传输

利用交流阻抗法研究了靛红掺杂聚吡咯膜内的电荷传输，通过非线性最小二乘法拟合，得出了体系的等效电路，并计算出其电荷扩散系数和异相电子传递反应速率常数。实验结果表明，随着膜厚的增加，活性点增多，异相电子传递反应速率常数增大，同时表观扩散系数也增大。     

Metal Complexes of Carbaporphyrinoid Systems

The cavities of carbaporphyrinoid systems provide unique environments for the formation of organometallic species. These systems commonly act as either dianionic or trianionic ligands, and may stabilize unusual oxidation states such as silver(III). Although the metalation of N‐confused porphyrins has been explored in great detail, the formation of metallo‐derivatives of other carbaporphyrinoids remains far less well explored. Nevertheless, exciting advances have been made on the metalation of carbaporphyrins, azuliporphyrins, benziporphyrins and related macrocycles.     

Metal Complexes of 1-Allenylimidazoles

Monomeric complexes ML _n X _m , where M = Co^{2 +}, Ni^{2 +}, Zn^{2 +}, Cd^{2 +}, Cu^{2 +}, Pd^{2 +}, Sn^{4 +}; L = 1-allenylimidazole, 1-allenyl-2-methylimidazole, 1-allenylbenzimidazole; n = 2, 4; m = 1, 2, 4; X = Cl, OCOCH3, was prepared for the first time, and their structure was studied by NMR and IR spectroscopy. In the complexes, 1-allenylimidazoles act as monodentate ligands coordinating via the heteroring ^N3atom, and the CH2 = C = CH group is stabilized by coordination of the azolyl ring with the metal, which hinders elec- tron transfer from the heteroring to the allenyl fragment. The prospective use of the complexes of Zn(OCOCH3)2 with 1-allenyl imidazole derivatives as antidotes and antihypoxants was demonstrated.     

Alkaline-Earth Metal Complexes with Pivaloylacetone

Pivaloylacetonates of alkaline-earth elements with composition M(Pa)₂ · nH₂O (n = 1, M = Sr, Ca; n = 0, 2, M = Ba) were synthesized and studied by IR and thermal analysis; their solubilities and volatility were estimated. It was found that the volatility changes regularly in the series M(Acac)₂–M(Pa)₂–M(Thd)₂ (HAcac is acetylacetone, HThd is dipivaloylmethane). The replacement of one methyl radical by the tert-butyl radical when going from acetylacetonates to pivaloylacetonates was shown to noticeably increase the volatility only for Sr(Pa)₂ · H₂O. Complexes of barium pivaloylacetonate with tetraglyme and -phenanthroline were synthesized and characterized.     

Photolithographic Encoding of Metal Complexes

A platform technology for the creation of spatially resolved surfaces encoded with a monolayer consisting of different metal complexes was developed. The concept entails the light‐triggered activation of a self‐ assembled monolayer (SAM) of UV‐labile anchors, that is, phenacylsulfides, and the subsequent cycloaddition of selected diene‐functionalized metal complexes at defined areas on the surface. The synthesis and characterization of the metal complexes for the UV‐light assisted anchoring on the surface and a detailed study of a short‐chain oligomer model system in solution confirm the high efficiency of the photoreaction. The hybrid materials obtained by this concept can potentially be utilized for the design of highly valuable catalytic or (opto‐)electronic devices.