银掺杂介孔氧化铝抗菌剂的一步合成与表征

以Al(NO_3)_3·9H_2O和AgNO_3为原料,采用水热法制备了介孔氧化铝纳米粒子(Mesoporous Al_2O_3NPs)和银掺杂介孔氧化铝纳米粒子(Mesoporous Ag/Al_2O_3NPs),通过X射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、X射线荧光光谱(XRF)、能量分散X射线衍射(EDX)和低温N2吸附-脱附等手段对产物进行了表征,通过最低抑菌浓度和抑菌圈实验研究了材料的抗菌性能.XRD分析表明在介孔Ag/Al_2O_3NPs中Al_2O_3是唯一结晶相,Ag掺杂后,介孔Ag/Al_2O_3NPs晶格常数和半高峰宽增大,晶面间距[(111),(400)和(440)面]减小.FE-SEM形貌分析表明掺杂后的介孔Ag/Al_2O_3NPs颗粒直径减小而孔径增大.EDX和XRF分析表明介孔Ag/Al_2O_3NPs中O/Al摩尔比为1.5,与Al_2O_3NPs中O/Al摩尔比相同.综合XRD和XRF分析结果认为,Ag进入介孔Al_2O_3晶格间隙形成间隙固溶体.低温N2吸附-脱附分析表明掺杂后的介孔Ag/Al_2O_3NPs比表面积、孔体积和孔径增大.曝气抗菌实验结果表明介孔Ag/Al_2O_3NPs的抗菌机理是活性氧和金属银的协同作用.介孔Ag/Al_2O_3NPs对革兰氏阴性菌(大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)具有明显的抗菌效果,对大肠杆菌和金黄色葡萄球菌的最低抑菌浓度(MIC)均为80μg/m L,抑菌圈直径分别为26 mm和24 mm.     

铈掺杂对Co_3O_4/微孔-介孔分子筛催化剂催化性能的影响

采用水热法制备了微孔-介孔分子筛,并以Ce掺杂改性后制备了Co3O4/Ce-微孔-介孔分子筛催化剂,考察了Ce掺杂微孔-介孔分子筛催化剂对苯催化完全氧化性能的影响,并采用BET,XRD,TPR等技术对催化剂进行了表征。研究结果表明:Ce的加入有利于提高MSZ-B催化剂的催化活性。XRD分析显示Ce的加入不会阻塞Co3O4在微孔-介孔分子筛孔道内的分布;TPR分析表明:Ce的加入提高了MSZ-B催化剂的可还原性能,催化剂的可还原性能是影响催化活性的主要因素;另外,介孔的存在不利于Ce改性Co3O4/ZSM-5微孔分子筛催化剂活性的提高。     

介孔吸附常用经典分析模型的比较

对介孔材料的孔特征进行科学表征是其开发与应用的关键环节之一。本文简要介绍了介孔吸附相关知识和常用经典分析模型的发展历史、应用范围和各自特点,将经典介孔分析方法分为有模型法、无模型法、完全无模型法、逆向法四类,对这些分析方法和3种常用的介孔分析软件进行了对比分析,这些内容对吸附仪管理人员、介孔材料的教学和研究具有一定的参考价值。     

有序介孔锰氧化物催化过氧化氢降解水中诺氟沙星

采用硬模板法制备了有序介孔氧化锰,并用过氧化氢氧化诺氟沙星的降解率及其抗菌活性变化评价了其催化活性.研究发现,有序介孔锰氧化物表现出较高的催化活性;低pH有利于提高其催化活性.与单独过氧化氢氧化过程相比,有序介孔锰氧化物的存在明显减弱了诺氟沙星的抗菌活性.叔丁醇对催化体系的抑制作用表明有序介孔锰氧化物促进了过氧化氢分解生成羟基自由基.通过对诺氟沙星在催化过程中的分解产物鉴定,提出了可能的分解途径.     

负载TS-1导向剂的介孔材料的合成、表征及催化性能研究

利用浸渍法将TS-1导向剂高度分散在介孔材料MCM-41和SBA-15的表面,制备出一系列在氧化反应中具有高活性的催化材料.对样品的表征显示催化剂保持了介孔的结构,同时具有四配位的钛物种均匀地分散于介孔催化剂的表面.催化结果显示,与钛硅分子筛(TS-1)相比,所制备的催化剂在小分子的氧化反应中表现出相似的活性,在大分子的氧化反应中展示了很高的活性,体现了介孔材料的优越性.     

纳米介孔氧化铁的制备

纳米氧化铁的许多优异性能使其成为广泛的研究热点。本文介绍了纳米氧化铁的制备及其颗粒大小、形貌控制等方面的进展状况。综述了各种不同形态介孔氧化铁及含铁介孔纳米复合材料的研究进展,结合课题组的研究工作,重点评述了介孔氧化铁的制备进展,并对该领域的研究方向和需要解决的问题提出了自己的观点。     

铈掺杂纳米氧化锌抗菌粉的研制及其结构性能分析

以纳米ZnO为载体,制备了复合无机抗菌剂Ce4+/ZnO.考察了不同氧化锌、Ce4+比例下的掺杂情况,利用Rietveld方法对掺杂样品的结构进行了精修,在自制实验装置上对其光催化性能进行了研究,并采用"营养肉汤法"对其抗菌性能作了检测.结果表明,ZnO对Ce4+的吸附率很高,可达100%,且几乎不受摩尔比的影响.X射线精修结果表明,有部分Ce4+进入了氧化锌晶格形成了固溶体.掺杂Ce4+明显提高了纳米ZnO的光催化性能和抗菌性能.     

Ag/SBA-15复合材料的制备及其抗菌性质

本文采用二维六方结构的介孔硅SBA-15作为主体, 先将其浸渍在葡萄糖溶液中, 利用土伦试剂在原位发生氧化-还原反应, 成功地在介孔孔道中制备出分散的银纳米粒子, 并以金黄葡萄球菌为研究对象, 对Ag/SBA-15的抑菌性能及持续抑菌能力进行了检测, 结果表明, 样品对金黄葡萄球菌有明显的抑菌作用并具有持续的抑菌能力.     

介孔Ce1-xZrxO2负载的Cu基催化剂在富氢条件下催化CO选择性氧化

采用多元醇为模板剂合成了介孔Ce1-xZrxO2(x=0.2,0.35,0.5)固溶体材料,并以其为载体负载CuO制备了Cu基催化剂.应用透射电子显微镜、X射线衍射、程序升温还原、程序升温脱附和N2吸附-脱附等技术对载体及催化剂进行了表征,并研究了Zr的取代比例x值对载体和Cu基催化剂性能的影响.结果表明,所有Ce1-xZrxO2样品均为介孔材料,其中Ce0.5-Zr0.5O2载体样品有较大的比表面积(181m2/g),CuO/Ce0.5Zr0.5O2催化剂样品在富氢条件下有较高的催化CO选择性氧化反应的活性和选择性.与其他催化剂样品相比,CuO/Ce0.5Zr0.5O2催化剂样品中形成的活性中心更多,分散性更好,对CO的吸附量更大,CO脱附温度更低,活性组分与载体的相互作用更强。     

有序介孔CuFe2O4同时催化去除碳烟与NOx

采用纳米复刻(浇筑)法制备一系列介孔CuFe_2O_4.通过X射线衍射(XRD)、 N_2物理吸附、透射电镜(TEM)等研究了不同制备条件对有序介孔CuFe_2O_4结构形成的影响.研究发现,作为对比,柠檬酸法仅能合成普通的四方相CuFe_2O_4纳米颗粒,但是硬模板法则能合成出高温淬火才能形成的立方晶相介孔结构CuFe_2O_4.进一步研究了该催化剂同时催化去除碳烟和氮氧化合物(NO_x)的性能,研究发现,与柠檬酸法合成的普通CuFe_2O_4催化剂相比,介孔结构CuFe_2O_4不仅大幅降低了碳烟起燃温度(324降低到278℃),而且将N_2的最高产率从5.9%提升到了92.2%.基于原位漫反射红外(in-situ DRIFTS)的机理分析研究表明,合成过程中采用NaOH除去硬模板的过程中会在介孔CuFe_2O_4表面造成大量残留的钠盐,这种高分散的钠物种促进了NO_x的吸附并转化为硝酸盐物种,从而促进碳烟氧化以及NO_x转化.但是与表面Na修饰的CuFe_2O_4相比,体相Na掺杂的CuFe_2O_4虽然具有更好的有序介孔结构,但是其氧化性能下降,进一步也导致了NO_x的催化还原性能的下降.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.