Magnetic circular dichroism of CdTe nanoparticles

Magnetic circular dichroism (MCD) of water-soluble CdTe nanoparticles was observed in the visible spectral range for the first time. Diameter of nanoparticles varied from 2.3 to 4.5 nm. Absorption and photoluminescence spectra were also recorded. Absorption line at 19400 cm^?1 and luminescent line at 18200 cm^?1 were observed. Splitting of value 960 cm^?1 was revealed in the MCD spectrum. Approximately the same splitting was extracted from the absorption spectrum. The MCD was identified as the temperature independent paramagnetic mixing effect. Nature of the absorption line and of its splitting are discussed.     

FMR and EPR in Ni@C nanocomposites: Size and concentration effects

One-domain Ni@C nanoparticles encapsulated in carbon coating have been investigated depending on the size and concentration of Ni in carbon. The nanoparticles of nickel were prepared with the average diameters changing in a broad range of 4–45 nm, and the concentration of Ni in C varies in 2–12 wt%. To prepare the Ni@C nanocomposites the solid solutions of nickel phthalocyanine–metal-free phthalocyanine (NiPc) _x (H₂Pc)_1–x , 0 ≤ x ≤ 1 were synthesized and the solidphase pyrolysis of these compounds was performed. In the case of ultradispersive Ni nanoparticles (the interval of quantum dots is 1–10 nm), a considerable shift of the resonance field and broadening of resonance absorption field were revealed in the spectra of FMR at room temperature. The data were interpreted taking into account the essential contribution of the surface magnetic anisotropy, the magnetic field of which far exceeds the magnetic field of volume anisotropy.     

Investigations on structural and optical properties of Zn1−xGdxS nanoparticles

Zn_1−xGd_xS (x = 0.00, 0.02 and 0.04) nanoparticles were synthesized by facile chemical co-precipitation method using PVP as a surfactant. ZnS nanoparticles could be doped with Gd ions during synthesis without altering the XRD patterns of ZnS. Also, the pattern of the powders showed cubic zincblende structure. The particle size obtained from the XRD studies lies in the range 3-5 nm, whereas from TEM analysis it is 4 nm for x = 0.02 sample. The UV-Vis absorption spectra revealed that Zn_1−xGd_xS nanoparticles exhibit strong confinement effect as the blue shift in the absorption spectra with that of the undoped ZnS. The photoluminescence spectra showed enhanced luminescence intensity and the entry of Gd into host lattice.     

The absorption,magnetic circular dichroism and emission of Eu2+ in cubic elpasolites

The absorption, magnetic circular dichroism (MCD) and emission/excitation spectra of some $\text{4?}{}^7\text{→4?}{}^6\text{5d}$ transitions in Eu²⁺ in several hexachloro and hexabromoelpasolites have been measured. Data were collected between 5 and 300 K and up to energies of 42,000 cm^?1. The absorption and MCD were satisfactorily interpreted using a coupling scheme that treats the d-electron crystal field as being much greater than the f-electron spin orbit coupling and essentially ignores other interactions.     

Magnetic circular dichroism of [Co/Pd] and [CoB/Pd] multilayered films

Magnetic circular dichroism (MCD) and X-ray absorption spectra (XAS) at the Co L_2,3-edge of [Co/Pd]₂₀ and [CoB/Pd]₂₀ multilayered films, which were fabricated at 260 °C with different magnetic layer thicknesses (δ), have been measured. The lineshapes of XAS–MCD show that the electronic state of Co 3d of the films hardly changes even when sputtered at higher temperatures. The expectation values of orbital and spin angular momentum (〈L_z〉 and 〈S_z〉) are estimated using the sum rule, and it is found that 〈L_z〉/〈S_z〉 in δ<0.5 nm is larger than that in δ>0.5 nm.     

α—NiSO4.6H2O晶体磁园二色谱和吸收谱的研究

用磁园二色谱和光吸收谱对α－ＮｉＳＯ４．６Ｈ２Ｏ晶体进行了测量和研究，实验结果表明在λ＝１８５～３３００ｎｍ范围内存在一系列吸收结构，其中三个主要主要吸收带结构分别对应于晶体中Ｎｉ离子基态到有关激发态的ｄ－ｄ跃迁，对它们进行了初步指认，实验中观测到红带的λ＝６５４ｎｍ和λ＝７１３ｎｍ两结构间存在一系列弱的结构峰，它们主要与自旋轨道耦合相互作用结果有关，在磁园二色谱中还观测到λ＝５８５ｎｍ的强吸收峰     

Electron magnetic resonance and magnetooptical studies of nanoparticle-containing borate glasses

We report electron magnetic resonance (EMR) and magnetooptical studies of borate glasses of molar composition 22.5K₂O-22.5Al₂O₃-55B₂O₃ co-doped with low concentrations of Fe₂O₃ and MnO. In as-prepared samples the paramagnetic ions, as a rule, are in diluted state. However, in the case where the ratio of the iron and manganese oxides in the charge is 3/2, magnetic nanoparticles with characteristics close to those of manganese ferrite are formed already at the first stage of the glass preparation, as evidenced by both magnetic circular dichroism (MCD) and EMR. After thermal treatment all glasses show characteristic MCD and EMR spectra, attesting to the presence of magnetic nanoparticles, predominantly including iron ions. Preliminary EXAFS measurements at the Fe K-absorption edge show an emergence of nanoparticles with a structure close to MnFe₂O₄ after annealing the glasses at 560 °C.By computer simulating the EMR spectra at variable temperatures, a superparamagnetic nature of relatively broad size and shape distribution with the average diameter of ca. 3-4 nm. The characteristic temperature-dependent shift of the apparent resonance field is explained by a strong temperature dependence of the magnetic anisotropy in the nanoparticles.The formation of magnetic nanoparticles confers to the potassium-alumina-borate glasses magnetic and magneto-optical properties typical of magnetically ordered substances. At the same time, they remain transparent in a part of the visible and near infrared spectral range and display a high Faraday rotation value.     

Characterization of ZnO:Co particles prepared by hydrothermal method for room temperature magnetism

ZnO based diluted magnetic semiconductor particles (ZnO:Co) have been grown using a hydrothermal method with good crystallinity. The atomic percentage of Co presented in the specimen is about 0.01. Based on the x-ray diffraction and high-resolution transition electron, Co is found to be incorporated into ZnO lattice without evidence of obvious Co precipitates. However, from photoluminescence (PL) spectra in the range of 1.94 -3.45 eV, a strong broad emission centered around 600 nm (2.07 eV) in the visible range as well as a relatively weak peak at 2.81 eV are observed, indicating the presence of Co impurities. Moreover, intrinsic emissions such as D^OX suggest that at least some Co have been doped into ZnO lattice, substituting for Zn²⁺ ions. The PL results further confirm the substitution of Zn²⁺ ions by Co, which leads to the changes of the electronic band structures. Magnetism could be realized at room temperature for the ZnO:Co nanoparticles under our experimental conditions although with low coercivity. The field-cooled and zero-field-cooled curves can be explained as a result of competition between the ferromagnetic and the antiferromagnetic ordering in the ZnO:Co nanoparticles. Combining the results from PL and magnetism characterization, it is reasonable to think that both doped Co in the ZnO lattice and Co impurities contribute to magnetism in ZnO:Co nanoparticles at room temperature.     

The optical properties and energy transition process in nanocomposite of polyvinyl-pyrrolidone polymer and Mn-doped ZnS

This study has been carried out on the optical properties of polyvinyl-pyrrolidone (PVP), the energy transition process in nanocomposite of PVP capped ZnS:Mn nanocrystalline and the influence of the PVP concentration on the optical properties of the PVP capped ZnS:Mn nanocrystalline thin films synthesized by the wet chemical method. The microstructures of the samples were investigated by X-ray diffraction, the atomic absorption spectroscopy, and transmission electron microscopy. The results showed that the prepared samples belonged to the sphalerite structure with the average particle size of about 2–3 nm. The optical properties of samples are studied by measuring absorption, photoluminescence (PL) spectra and time-resolved PL spectra in the wavelength range from 200 to 700 nm at 300 K. From data of the absorption spectra, the absorption edge of PVP polymer was found about of 230 nm. The absorption edge of PVP capped ZnS:Mn nanoparticles shifted from 322 to 305 nm when the PVP concentration increases. The luminescence spectra of PVP showed a blue emission with peak maximum at 394 nm. The luminescence spectra of ZnS:Mn–PVP exhibits a blue emission with peak maximum at 437 nm and an orange–yellow emission of ion Mn²⁺ with peak maximum at 600 nm. While the PVP coating did not affect the microstructure of ZnS:Mn nanomaterial, the PL spectra of the PVP capped ZnS:Mn samples were found to be affected strongly by the PVP concentration.     

Optical properties of sol-gel fabricated Mn/SiO2 nanocomposites: Observation of surface plasmon resonance in Mn nanoparticles

Manganese nanoparticles were grown in silica glass and silica film on silicon substrate by annealing of the sol-gel prepared porous silicate matrices doped with manganese nitrate. Annealing of doped porous silicate matrices was performed at various conditions that allowed to obtain the nanocomposite glasses with various content of metallic Mn. TEM of Mn/SiO₂ glass indicates the bimodal size distribution of Mn nanoparticles with mean sizes of 10.5 nm and 21 nm. The absorption and photoluminescence spectra of Mn/SiO₂ glasses were measured. In the absorption spectra at 300 nm (4.13 eV) we observed the band attributed to the surface plasmon resonance in Mn nanoparticles. The spectra proved the creation of Mn²⁺ and Mn³⁺ ions in silica glass as well. The absorption spectra of Mn/SiO₂ glasses annealed in air prove the creation of manganese oxide Mn₂O₃. The measured reflection spectra of Mn/SiO₂ film manifest at 240-310 nm the peculiarity attributed to surface plasmons in Mn nanoparticles.     

Sonochemical fabrication of edible fragrant antimicrobial nano coating on textiles and polypropylene cups

We report on a simple and effective ultrasound-assisted deposition of vanillin nanoparticles (∼50 nm in size), raspberry ketone (RK) nanoparticles (∼40 nm in size) and camphor nanoparticles (width ∼30 nm, length ∼40 nm in size) on textiles and on polypropylene surfaces. The excellent antibacterial and antifungal activity of the fragrant coatings on cotton bandages, and polypropylene surface against Escherichia coli (E. coli), Salmonella paratyphi A (S. paratyphi A) and the yeast Candida albicans (C. albicans) cultures was demonstrated. It is worth pointing out that these fragrant materials are edible, making them very useful for packaging. The mechanism of the edible fragrant coating formation and adhesion to the textile was discussed, and finally an up-scaling of the sonochemical process for textile coating was carried out.     

Magnetic Circular Dichroism Spectra of p-Disubstituted Benzenes Possessing Both Electron-Donating and Accepting Groups

Abstract

The magnetic circular dichroism (MCD) and absorption spectra of some p-disubstituted benzenes possessing both electron-donating and accepting groups were measured. The electronic spectra of the above compounds are characterized by the appearance of two absorption bands, one of which appears at 25000–40000 cm^?1 region with large intensity, and another at 40000–50000 cm^?1 region with rather small intensity. These absorption bands, especially the latter one, have been investigated by means of the MCD spectra and molecular orbital calculations based on the Pariser-Parr-Pople method.     

Linear optical absorption and photoluminescence emission properties of gold nanoparticles prepared by laser ablation technique

Gold nanoparticles of average size varying between 1.1 and 3.3?nm are prepared by 1064?nm Nd:YAG laser ablation of solid gold target kept in ethylene glycol medium. The measured UV-Visible absorption spectra showed the presence of sharp absorption peaks in the UV and in the visible regions due to the interband transition and surface plasmon resonance (SPR) oscillations in Au nanoparticles, respectively. The increase in linewidth of the SPR peaks with the reduction in particle sizes is observed due to intrinsic size effects. The prepared samples exhibit photoluminescence (PL) emissions in the UV-Visible region peaked at ??354?nm due to the recombination of electrons with holes from sp conduction band to d-band of Au. The peak PL intensity in the sample prepared with 60 minutes of laser ablation time is enhanced by a factor of ??2.5 compared to that obtained in the sample prepared with a laser-ablation time duration of 15 minutes.     

Synthesis of NiAu alloy and core–shell nanoparticles in water-in-oil microemulsions

NiAu alloy nanoparticles with various Ni/Au molar ratios were synthesized by the hydrazine reduction of nickel chloride and hydrogen tetrachloroaurate in the microemulsion system. They had a face-centered cubic structure and a mean diameter of 6–13 nm, decreasing with increasing Au content. As Au nanoparticles did, they showed a characteristic absorption peak at about 520 nm but the intensity decreased with increasing Ni content. Also, they were nearly superparamagnetic, although the magnetization decreased significantly with increasing Au content. Under an external magnetic field, they could be self-organized into the parallel lines. In addition, the core–shell nanoparticles, Ni₃Au₁@Au, were prepared by the Au coating on the surface of Ni₃Au₁ alloy nanoparticles. By increasing the hydrogen tetrachloroaurate concentration for Au coating, the thickness of Au shells could be raised and led to an enhanced and red-shifted surface plasmon absorption.     

Magnetically coupled clusters in aggregated maghemite ferrofluid: Mössbauer and magnetization study

Mössbauer spectroscopy in a weak static magnetic field and measurements of isothermal magnetization loops were used to study the effect of polymer coating of the γ-Fe ₂ O ₃ nanoparticles on the magnetic properties of concentrated ensembles of such nanoparticles. It was found that the individual coating of the nanoparticles by a ～ 1 nm layer of the polymer leads to the observable changes in the shapes of the Mössbauer spectra and the magnetization curves of the ensembles. Modeling of the experimental magnetization curves in the classical Langevin model and analysis of the Mössbauer spectra in the generalized multi-level relaxation model revealed that the establishment of interparticle magnetic dipole interactions leads to both a ～ 30 % increase in the magnetic anisotropy constant and a ～ 35 % increase in the width of the hysteresis loop.     

Synthesis of BaSO4 nanoparticles by precipitation method using sodium hexa metaphosphate as a stabilizer

We describe the synthesis and structure of Barium sulfate nanoparticles by precipitation method in the presence of water soluble inorganic stabilizing agent, sodium hexametaphosphate, (NaPO₃)₆. The structural parameters were refined by the Rietveld refinement method using powder X-ray diffraction data. Barium sulfate nanoparticles were crystallized in the orthorhombic structure with space group Pbnm (No. 62) having the lattice parameters a=7.215(1) (Å), b=8.949(1) (Å) and c=5.501(1) (Å) respectively. Transmission electron microscopy study reveals that the nanoparticles are size range, 30–50 nm. Fourier transform infrared spectra showed distinct absorption due to the SO₄^2? moiety at 1115 and 1084 cm^?1 indicating formation of barium sulfate nanoparticles free from the phosphate group from the stabilizer used in the synthesis.     

Antibacterial polymeric coatings grown by matrix assisted pulsed laser evaporation

We report on a simple and environmental friendly method to produce composite biocompatible antibacterial coatings consisting of silver nanoparticles (AgNPs, size 40 nm) combined with polymer blends (polyethylene glycol/poly(lactide-co-glycolide), PEG/PLGA blends). The PEG/PLGA&AgNPs coatings were produced by Matrix Assisted Pulsed Laser Evaporation, using a Nd:YAG laser with λ=266 nm. The AgNPs were deposited either on top of a PEG/PLGA layer (i.e., bilayered coating), or simultaneously with the polymers (i.e., blended coating). In both cases, chemical analysis indicated that the polymers preserved their integrity, with no evidence of chemical interaction with the AgNPs. Morphological investigations evidenced homogenous distribution of individual AgNPs on the surface of the coatings, with no signs of aggregation. The size of the AgNPs was ～40 nm, consistent with size of the as-received ones. The presence of AgNPs in the coatings was confirmed by the absorption band at ～420 nm and their stability was checked by monitoring this absorption versus time. After exposure to air, the AgNPs from the bilayered coating showed signs of oxidation. In the blended coating, the oxidation of the AgNPs was prevented by the neighboring polymer molecules. Finally, preliminary investigations confirmed the bacterial killing activity of the coatings against Escherichia coli.     

Synthesis and photoluminescent and nonlinear optical properties of manganese doped ZnS nanoparticles

In this work we synthesized ZnS:Mn²⁺ nanoparticles by chemical method using PVP (polyvinylpyrrolidone) as a capping agent in aqueous solution. The structure and optical properties of the resultant product were characterized using UV-vis optical spectroscopy, X-ray diffraction (XRD), photoluminescence (PL) and z-scan techniques. UV-vis spectra for all samples showed an excitonic peak at around 292 nm, indicating that concentration of Mn²⁺ ions does not alter the band gap of nanoparticles. XRD patterns showed that the ZnS:Mn²⁺ nanoparticles have zinc blende structure with the average crystalline sizes of about 2 nm. The room temperature photoluminescence (PL) spectrum of ZnS:Mn²⁺ exhibited an orange-red emission at 594 nm due to the ⁴T₁-⁶A₁ transition in Mn²⁺. The PL intensity increased with increase in the Mn²⁺ ion concentration. The second-order nonlinear optical properties of nanoparticles were studied using a continuous-wave (CW) He-Ne laser by z-scan technique. The nonlinear refractive indices of nanoparticles were in the order of 10⁻⁸ cm²/W with negative sign and the nonlinear absorption indices of these nanoparticles were obtained to be about 10⁻³ cm/W with positive sign.     

Optical and ESR studies on Fe doped ZnS nanocrystals

Zn_1 − xFe_xS (x=0.0, 0.1, 0.2, 0.4 and 0.6) nanocrystals have been obtained by chemical co-precipitation from homogeneous solutions of zinc and iron salt compounds, with S²⁻ as precipitating anion formed by decomposition of thiophenol. The TEM micrographs show a spherical shape for ZnS nanocrystals and their average size is around 7 nm. The optical absorption spectra indicate a blue shift of the absorption edge with increasing Fe-content. The luminescence of nanoparticles excite at about 370 nm with an emission peak at around 490 nm. At room temperature, ESR signal characteristic of Fe³⁺ was observed in samples of all concentrations.     

Amplification of raman scattering by localized plasmons in silver nanoparticles on the surface of zinc oxide nanorods

The magnetron sputtering of Ag nanoparticles onto ZnO nanorod arrays is studied. The lateral faces of the nanorods are coated with nanoparticles at a much lower density as compared to the flat faces at comparable sputtering times. The silver density is high on the edges of the lateral faces of the nanorods. The plasmon absorption in the synthesized arrays of nanorods coated with individual Ag nanoparticles is maximal at 450?C500 nm. The appearance of local plasmon excitations increases the intensity of the multiphonon processes with the participation of ZnO polar modes in Raman spectra. The cross section of resonance Raman scattering for A ₁(LO) phonon overtones increases with the equivalent Ag film thickness.