Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Selective Hydrogenation of Citral over a Carbon‐titania Composite Supported Palladium Catalyst

A novel carbon‐titania composite material, C/TiO₂, has been prepared by growing carbon nanofibers (CNFs) on TiO₂ surface via methane decomposition using Ni‐Cu as a catalyst. The C/TiO₂ was used for preparing supported palladium catalyst, Pd/C/TiO₂. The support and Pd/C/TiO₂ catalyst were characterized by BET, SEM, XRD and TG‐DTG. Its catalytic performance was evaluated in selective hydrogenation of citral to citronellal, and compared with that of activated carbon supported Pd catalyst. It was found that the Pd/C/TiO₂ catalyst contains 97% of mesopores. And it exhibited 88% of selectivity to citronellal at citral conversion of 90% in citral hydrogenation, which was much higher than that of activated carbon supported Pd catalyst. This result may be attributed to elimination of internal diffusion limitations, which were significant in activated carbon supported Pd catalyst, due to its microporous structure.     

Structure and photoluminescence properties of TiO<Subscript>2</Subscript> nanoparticles synthesized from a novel luminescent nano-titanium complex

A new titanium complex [Ti(Me–Q)₂(Cl)₂] (1) is prepared by reacting titanium tetrachloride with 2-methyl-8-hydroxyquinoline in a fast and facile process. The complex is fully characterized based on its ¹H and ¹³C NMR, IR, and UV spectra and elemental analysis. The prepared nanostructured compound is synthesized by the sonochemical method. This new nanostructure is characterized by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), IR spectroscopy, and elemental analysis. Thermal stability of single crystalline and nanosize samples of the prepared compound is studied by thermal gravimetric (TG) and differential thermal analysis (DTA). The prepared complexes both bulk and nanosized are utilized as a precursor for the preparation of TiO₂ nanoparticles by direct thermal decomposition at 600°C in air. The morphology and size of TiO₂ nanoparticles are determined by SEM, powder XRD, and IR spectroscopy and the results show that the TiO₂ nanoparticle size depends on the initial particle size of 1. Photoluminescence (PL) properties of the nanostructured and crystalline bulk prepared complex and their TiO₂ nanoparticle cores are investigated.     

Photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant on highly smooth and ordered TiO2 nanotube arrays

The photoelectrochemical water splitting and simultaneous photoelectrocatalytic degradation of organic pollutant were achieved on TiO₂ nanotube electrodes with double purposes of environmental protection and renewable energy production under illumination of simulated solar light. The TiO₂ nanotube arrays (TiO₂ NTs) were fabricated by a two-step anodization method. The TiO₂ NTs prepared in two-step anodization process (2-step TiO₂ NTs) showed much better surface smoothness and tube orderliness than TiO₂ NTs prepared in one-step anodization process (1-step TiO₂ NTs). In the photoelectrochemical water splitting and simultaneous photoelectrocatalytic decomposition process, the 2-step TiO₂ NTs electrode showed both highest photo-conversion efficiency of 1.25% and effective photodecomposition efficiency with existing of methylene blue (MB) as sacrificial agent and as pollutant target. Those results implied that the highly ordered nanostructures provided direct pathway and uniform electric field distribution for effective charges transfer, as well as superior capabilities of light harvesting.     

The Visible‐Light Photocatalytic Activity and Antibacterial Performance of Ag/AgBr/TiO2 Immobilized on Activated Carbon

Visible‐light‐driven Ag/AgBr/TiO₂/activated carbon (AC) composite was prepared by solgel method coupled with photoreduction method. For comparison, TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂ were also synthesized. Their characteristics were analyzed by XRD, SEM‐EDS, TG‐DSC and UV–vis techniques. Photocatalytic activity and antibacterial performance under visible‐light irradiation were investigated by ICP‐AES, ATR‐FT‐IR and spectrophotometry methods using methylene blue and Escherichia coli as target systems, respectively. The results showed that Ag/AgBr was successfully deposited on anatase TiO₂/AC surface, and exhibited a distinct light absorption in the visible region. Ag/AgBr/TiO₂/AC displayed excellent antibacterial performance both in dark and under visible‐light illumination. The growth of E. coli cell was inhibited in the presence of Ag/AgBr/TiO₂/AC in dark. Moreover, upon visible‐light illumination, a significant damage of cell membrane was noticed. Ag/AgBr/TiO₂/AC was also shown higher photocatalytic efficiency for methylene blue degradation than those of TiO₂, TiO₂/AC, and Ag/AgBr/TiO₂. This is attributed to the synergetic effect between AC and Ag/AgBr/TiO₂, of which AC acts as the role of increasing reaction areas, continuous enriching, and transferring the adsorbed MB molecules to the surface of supported photocatalysts, and the Ag/AgBr/TiO₂ acts as a highly active photocatalyst for degrading MB molecules under visible‐light irradiation.     

Ultradeep Hydrodesulfurization of Dibenzothiophene (DBT) Derivatives over Mo-Sulfide Catalysts Supported on TiO2-Coated Alumina Composite

The present paper reviews in detail the different studies now being conducted by our research team concerning the ultradeep hydrodesulfurization (HDS) of dibenzothiophene (DBT) derivatives over Mo/TiO₂ and Mo/TiO₂–Al₂O₃ catalysts. First, a detailed characterization of Mo/TiO₂ (P-25 Degussa, 50 m²/g) catalysts prepared by equilibrium adsorption technique shows that Mo- species are highly and uniformly dispersed on the surface of titania up to 6.6 wt% MoO₃ loading. Above this value, some aggregation of Mo occurs, leading to the formation of bulk MoO₃. Below 6.6 wt% MoO₃ loading, the Raman spectroscopy data of the calcined samples show that the supported Mo-species possess a highly distorted octahedral MoO₆ structure. TiO₂–Al₂O₃ composites were prepared by chemical vapor deposition (CVD) using TiCl₄ as a precursor. Using several characterization techniques, we demonstrated that the support composite presents a high dispersion of TiO₂ over -Al₂O₃ without forming precipitates up to ca. 11 wt% loading. Moreover, the textural properties of the composite support are comparable to those of alumina. Under the present sulfidation conditions (673 K, 5%H₂S/95%H₂), Mo-species supported on TiO₂ are better sulfided than on alumina, as demonstrated using XPS. This can be attributed to the relatively lower interaction between Mo-species and titania. The state of sulfide species supported on the composite support can be considered as a transition state between TiO₂ and Al₂O₃. However, at relatively higher TiO₂ loadings (ca. 11 wt%), Mo/TiO₂–Al₂O₃ catalysts exhibit sulfidability similar to that of Mo/TiO₂. The HDS tests conducted in both the laboratory and in industry show that sulfide catalysts supported on TiO₂–Al₂O₃ (ca. 11 wt% TiO₂) are more active than those supported on TiO₂ or Al₂O₃.     

TiO2-Al2O3载体的制备方法对其负载的磷化镍催化剂加氢脱氮反应性能的影响

采用共沉淀法和原位溶胶-凝胶法制备了TiO₂-Al₂O₃复合载体,其负载的磷化镍催化剂采用等体积浸渍法和H₂原位还原法制备. 通过N₂吸附（BET）、X射线衍射（XRD）、透射电镜（TEM）、程序升温还原（TPR）,X射线光电子能谱（XPS）和等离子体发射光谱（ICP-AES）表征技术对催化剂进行了表征,并通过喹啉的加氢脱氮反应评价了催化剂的加氢脱氮性能. 结果表明,原位溶胶-凝胶法制成的复合载体基本保留了原有的γ-Al₂O₃的孔特征,具有较大的比表面积和较宽的孔分布,TiO₂主要以表面富集的形式分散在管状的γ-Al₂O₃表面,其负载的磷化镍催化剂还原后所形成的活性相为Ni₂P和Ni₁₂P₅;而共沉淀法制成的复合载体比表面积较小,孔径分布更加集中,TiO₂趋于在块状的Al₂O₃表面均匀分散,其负载的磷化镍催化剂具有更好的可还原性,还原后所形成的活性相为Ni₂P. 不同的载体制备方法和不同的钛铝比对催化剂加氢脱氮性能影响较大,当n（Ti）/n（Al）=1/8时,共沉淀法载体负载的催化剂表现出最佳的加氢脱氮性能,在340 ℃,3 MPa,氢油体积比500,液时空速3 h^-1的反应条件下,喹啉的脱氮率可以达到91.3%.     

Influence of Support Type and Metal Loading in Methane Decomposition over Iron Catalyst for Hydrogen Production

Natural gas resources, stimulate the method of catalytic methane decomposition. Hydrogen is a superb energy carrier and integral component of the present energy systems, while carbon nanotubes exhibit remarkable chemical and physical properties. The reaction was run at 700 °C in a fixed bed reactor. Catalyst calcination and reduction were done at 500 °C. MgO, TiO₂ and Al₂O₃ supported catalysts were prepared using a co‐precipitation method. Catalysts of different iron loadings were characterized with BET, TGA, XRD, H₂‐TPR and TEM. The catalyst characterization revealed the formation of multi‐walled nanotubes. Alternatively, time on stream tests of supported catalyst at 700 °C revealed the relative profiles of methane conversions increased as the %Fe loading was increased. Higher %Fe loadings decreased surface area of the catalyst. Iron catalyst supported with Al₂O₃ exhibited somewhat higher catalytic activity compared with MgO and TiO₂ supported catalysts when above 35% Fe loading was used. CH₄ conversion of 69% was obtained utilizing 60% Fe/Al₂O₃ catalyst. Alternatively, Fe/MgO catalysts gave the highest initial conversions when iron loading below 30% was employed. Indeed, catalysts with 15% Fe/MgO gave 63% conversion and good stability for 1 h time on stream. Inappropriateness of Fe/TiO₂ catalysts in the catalytic methane decomposition was observed.     

Synthesis of nanostructured titania/zirconia membrane and investigation of its physical separation and photocatalytic properties in treatment of textile industries wastewater

Nanostructured TiO₂/ZrO₂ composite membranes with varying compositions were obtained by sol–gel technique. The influence of 0–30 mol% zirconia doping on microstructure, water permeability, photocatalytic and physical separation properties, removal of methyl violet of textile industries wastewater and thermal and mechanical stability of titania/zirconia composite membranes was described. Firstly, alumina supports were coated with TiO₂ intermediate layers using the colloidal sol–gel route. The TiO₂/ZrO₂ composite sols were prepared via a polymeric sol–gel method and dip-coated on TiO₂ intermediate layer. The samples were characterized by DLS, TG-DTA, XRD, FTIR, BET-BJH, UV–visible, SEM, TEM and AFM. It was shown that zirconia retards the phase transformation of anatase to rutile until at least 700 °C. The minimum pore size and maximum surface area obtained were 1.2 nm and 153 m²/g, respectively, attributed to the sample with 20 mol% zirconia. The mechanical strength of titania membranes was significantly improved by addition of zirconia. The most methyl violet removal efficiency obtained, with and without UV-irradiation, is 80.8 and 72.6%, respectively, attributed to the sample with 20 mol% zirconia.     

The fabrication of TiO<Subscript>2</Subscript> nanoparticle/ZnO nanowire arrays bi-filmed photoanode and their effect on dye-sensitized solar cells

Porous TiO₂ nanoparticles coated on ZnO nanowire arrays (TiO₂ NP/ZnO NW) as photoanode for dye-sensitized solar cell (DSSC) has been fabricated and investigated to improve the power conversion efficiency. The TiO₂ NP/ZnO NW photoanode consists of single crystalline ZnO NWs synthesized via hydrothermal method and porous TiO₂ NP film covered on the surface of ZnO NW arrays by screen printing technique. The effect of TiO₂ NPs thickness of the bi-filmed photoanode on the cell performance has been investigated, and TiO₂ NP/ZnO NW DSSC with NP thickness of ~5 μm exhibits the best efficiency of 4.68%, higher than 1.16% of ZnO NW DSSC and 3.18% of TiO₂ NPs DSSC, prepared and tested under identical conditions. The efficiency increase is attributed to the enlarged photocurrent, due to the greatly enhanced surface area for dye absorption and light harvesting efficiency resulted from TiO₂ NPs, and improved open-circuit voltage, due to reduced electron recombination by providing direct conduction pathway along ZnO NWs.     

Supported oxorhenate catalysts prepared by thermal spreading of metal Re for methanol conversion to methylal

TiO₂-anatase and SiO₂ supported oxorhenate catalysts were prepared by an original and simple technique based on the oxidative dispersion of metallic rhenium under dry conditions. The dispersion process of the supported oxorhenate phase as a function of the rhenium coverage and the support properties are discussed on the base of in situ characterization. The structures of the as prepared catalysts were found to be comparable to those of materials prepared using the incipient wetness impregnation technique. The absence of water in the preparation technique has made it possible to highlight the role of the hydration level on the rhenium oxide volatilization. The as-prepared Re/TiO₂ catalysts were found to be effective for the direct conversion of methanol to methylal.     

Degradation of methylene blue via Co–TiO<Subscript>2</Subscript> nano powders modified by meso-tetra(carboxyphenyl)porphyrin

TiO₂ photocatalylysts as an environmental cleaning factor has drawn considerable attention due to the global increase in the level of environmental pollutions. Studies on the development of new TiO₂ materials wherein its photocatalytic activity can be activated by visible light will be valuable for field application. In this study, porphyrins/Co-doped TiO₂ were prepared by sol–gel method. The nanopowders were characterized by means of X-ray diffraction, energy dispersive X-ray spectroscopy, IR spectroscopy and transmission electron microscopy (SEM). In addition, the photocatalytic degrading efficiency of porphyrins/Co-doped TiO₂ complexes on the methylene blue decomposition under irradiation with visible light is evaluated.     

Sonochemical synthesis of Fe–TiO2–SiC composite for degradation of rhodamine B under solar simulator

Fe–TiO₂–SiC composite with photocatalytic activity has been synthesized by a low cost sonochemical process in the presence of citric acid. The addition of citric acid during the sonochemical process allows the formation of a photocatalytic coating of Fe–TiO₂ onto silicon carbide. Experimental characterization results indicate that the composite was formed over all the surface of the silicon carbide (SiC) with an anatase crystalline TiO₂ phase with iron incorporation. The incorporation of iron narrows the band gap of TiO₂ which allow the absorbtion of light with a large wavelength. The obtained Fe–TiO₂–SiC composite exhibits good enhanced photocatalytic activity for the degradation of rhodamine B under solar simulator irradiation in comparison with the commercial TiO₂–P25.     

TiO2微粒功能化多孔Al2O3膜的光电化学研究

用恒电位法制备了多孔Al₂O₃薄膜, 通过在Al₂O₃薄膜孔内水蒸汽水解钛酸异丙酯生成了锐钛矿型TiO₂微粒, 制备出了Al₂O₃与TiO₂微粒的复合薄膜. 用XRD, SEM, 光电化学方法进行了研究. 实验表明: 该复合薄膜具有光电转换特性, 在光催化、光电化学太阳能转换中具有应用价值.     

负载型纳米二氧化钛对重金属离子吸附性能的研究

采用溶胶-凝胶法制备二氧化钛溶胶, 将其浸渍在硅胶上, 合成了负载型纳米二氧化钛材料, 以X射线衍射(XRD)、扫描电镜(SEM)等手段对其进行了表征. 以ICP-AES为检测手段, 系统地研究了负载型纳米TiO₂材料对重金属离子Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的吸附性能. 结果表明, 在pH 8～9范围内, 所研究的重金属离子均可被定量富集, 吸附的金属离子可用0.5 mol/L的HNO₃完全解脱. 负载型纳米二氧化钛对Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的静态吸附容量分别为8.3, 13.1, 12.6和5.1 mg/g, 与未负载的纳米二氧化钛相近. 将其应用于环境标准样品中Cd^2＋, Cr^3＋, Cu^2＋和Mn^2＋的分离富集与测定, 结果满意.     

Bifunctional activated carbon with dual photocatalysis and adsorption capabilities for efficient phenol removal

Bifunctional activated carbons (AC) with the abilities of both photocatalysis and adsorption were fabricated via the sol?Cgel route combined with hydrothermal treatment and N₂ reactivation method. TiO₂ was located mainly at the entrance of the surface macropores of AC. Under UV light irradiation, efficient removal of phenol was realized by combination of adsorption and photocatalytic degradation for the obtained bifunctional materials. In insufficient light or dark, phenol removal occurred mainly through adsorption. The prepared bifunctional carbon with a mass ratio of 50 TiO₂ per AC ratio exhibited high efficiency for phenol removal. The total phenol removal capacity of 50TiO₂/AC was almost 5 times of that of pure AC and 6 times of that pure TiO₂ after 10 cycles. The prepared bifunctional carbons possess the advantages of high pollutant removal capability and good recyclability, making them promising for the efficient treatment of lightly polluted aqueous solutions.     

Preparation and properties of a new composite photocatalyst based on nanosized titanium dioxide

The use of photocatalysts supported on adsorbents is receiving substantial attention. Supporting TiO₂ with zeolites is found to be one of the best solutions to increase the efficiency of TiO₂-based photocatalysts. This work was focused on simple preparation of a TiO₂/Na-ZSM-5 composite catalyst by the solid state dispersion (SSD) method and its modification with an organic photosensitizer — polythiophene (PT). Using the XRD diffractometry, structure of the new composite catalyst was proved. Beside this composite catalyst, mechanical mixtures of TiO₂-based catalysts with Na-ZSM-5 zeolite were prepared. The efficiency of all five available photocatalysts (TiO₂, TiO₂-PT, mechanical mixture of TiO₂ + Na-ZSM-5, mechanical mixture of TiO₂-PT + Na-ZSM-5, and the modified SSD-PT composite) on photodegradation of 4-chlorophenol was compared. By measuring the formation of chloride ions and decreasing the 4-chlorophenol concentration at two different initial concentrations of 4-chlorophenol in the basic aqueous solution, the photoefficiency and adsorption properties of our photocatalysts were determined. Presented at the 35th International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 26–30 May 2008.     

Synthesis and Ex-situ Characterization of Nafion/TiO2 Composite Membranes for Direct Ethanol Fuel Cell

Nafion/TiO₂ composite membranes for different loadings of TiO₂ were prepared by casting method for the possible application in direct ethanol fuel cell (DEFC). The properties of the composite membranes were investigated by scanning electron microscopy (SEM), x-ray diffraction (XRD), thermogravimetric analyser (TGA), ion exchange capacity, water and alcohol uptake, swelling ratio, proton conductivity, and ethanol crossover. The observed characteristics of the membranes were evaluated for DEFC and compared with the direct methanol fuel cell (DMFC) membrane. The analysis reveales a significant influence on the TiO₂ surface characteristics, water and alcohol uptake, and swelling of the membrane. The TiO₂ composite membranes exhibited a sharp decrease in methanol and ethanol crossover for 5% TiO₂ and the proton conductivity was heighest for 1% TiO₂ loading. The best compromise between proton conductivity and crossover has been found out with the help of the characteristic factor ϕ. The optimum loading of 5% TiO₂ composite membrane has shown the maximum characteristic factor.     

Synthesis of Nanostructured Carbon on Ni Deposited on Mesoporous Aluminum,and Titanium Oxides. Investigation of Biocatalytic Properties of Lipase Adsorbed on Carbon–Mineral Supports

This work is a continuation of the studies devoted to the synthesis of nanostructured carbon (NSC) as a result of the pyrolysis of a mixture of H₂ + C₃–C₄ alkanes on supported Ni catalysts. Mesoporous alumina (γ-Al₂O₃) and titania (TiO₂), on which Ni(II) compounds are deposited by impregnation or homogeneous precipitation, are studied as carriers. Using the methods of thermogravimetric analysis and scanning electron microscopy, it is shown that the activity of Ni catalysts (carbon yield) and the morphology of synthesized NSC are largely determined by the chemical nature of the support. It is found that the synthesis of NSC in the form of carbon nanofibers with a pronounced filamentary structure proceeds only on a Ni catalyst supported on titanium dioxide. The mesoporous carbon–mineral supports obtained after catalytic pyrolysis were studied in the adsorptive immobilization of the enzyme such as Thermomyces lanuginosus lipase. The adsorption properties of the supports, as well as the enzymatic activity and stability of the prepared biocatalysts in the esterification of saturated fatty acids (capric, C10: 0) with aliphatic alcohols (isopentanol, C₅) in the non-aqueous media of organic solvents (hexane and diethyl ether) at ambient temperature, are studied. Biocatalysts prepared by lipase adsorption on NSC/TiO₂ show the maximum esterification activity of 100 EA/g, which is 20–45 times higher than the activity of lipase adsorbed on NSC/Al₂O₃.     

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.