Theoretical study of photoinduced epoxidation of olefins catalyzed by ruthenium porphyrin

Epoxidation of olefin by [Ru(TMP)(CO)(O)](-) (TMP = tetramesitylporphine), which is a key step of the photocatalyzed epoxidation of olefin by [Ru(TMP)(CO)], is studied mainly with the density functional theory (DFT) method, where [Ru(Por)(CO)] is employed as a model complex (Por = unsubstituted porphyrin). The CASSCF method was also used to investigate the electronic structure of important species in the catalytic cycle. In all of the ruthenium porphyrin species involved in the catalytic cycle, the weight of the main configuration of the CASSCF wave function is larger than 85%, suggesting that the static correlation is not very large. Also, unrestricted-DFT-calculated natural orbitals are essentially the same as CASSCF-calculated ones, here. On the basis of these results, we employed the DFT method in this work. Present computational results show characteristic features of this reaction, as follows: (i) The epoxidation reaction occurs via carboradical-type transition state. Neither carbocation-type nor concerted oxene-insertion-type character is observed in the transition state. (ii) Electron and spin populations transfer from the olefin moiety to the porphyrin ring in the step of the C-O bond formation. (iii) Electron and spin populations of the olefin and porphyrin moieties considerably change around the transition state. (iv) The atomic and spin populations of Ru change little in the reaction, indicating that the Ru center keeps the +II oxidation state in the whole catalytic cycle. (v) The stability of the olefin adduct [Ru(Por)(CO)(O)(olefin)](-) considerably depends on the kind of olefin, such as ethylene, n-hexene, and styrene. In particular, styrene forms a stable olefin adduct. And, (vi) interestingly, the difference in the activation barrier among these olefins is small in the quantitative level (within 5 kcal/mol), indicating that this catalyst can be applied to various substrates. This is because the stabilities and electronic structures of both the olefin adduct and the transition state are similarly influenced by the substituent of olefin.     

强酸性阳离子交换树脂催化合成醋酸正丁酯的动力学研究

以强酸性阳离子交换树脂Amberlyst 15作为催化剂,研究了醋酸与正丁醇合成醋酸正丁酯的反应动力学;考察了搅拌速度、催化剂粒径、温度、催化剂用量,以及酸醇物质的量之比对醋酸转化率的影响;建立了拟均相动力学模型,对实验数据进行了拟合,并估算了相应的动力学参数.结果表明,由拟均相动力学模型得到的计算值与实验值吻合较好.     

Kinetic and thermodynamic studies of the esterification of acidified oil catalyzed by sulfonated cation exchange resin

This study describes the kinetics and thermodynamics of the esterification of acidified oil with methanol catalyzed by sulfonated cation exchange resins(SCER). The effects of the mass ratio of methanol to acidified oil,reaction temperature,and catalyst loading were studied to optimize the conditions for maximum conversion of free fatty acids(FFAs). The results showed that the optimal conversion rate of FFAs was 91.87% at the mass ratio of methanol to acidified oil of 2.5:1.0,reaction temperature of 65.0 °C,catalyst loading of 5.0 g and reaction time of 8.0 h. The external and internal mass transfer resistances were negligible based on the experimental results and a pseudo-homogeneous kinetic model was proposed for the esterification. The activation energy and thermodynamic parameters including G,S and H were determined. The conversion rates of FFAs obtained from the established model were in good agreement with the experimental data.     

Decomposition of a cation exchange resin with hydrogen peroxide

Ion exchange resins are widely used in the field of nuclear industry. The present work aimed at the development of a method for complete decomposition of cation exchange resins with H₂O₂ in the presence of Fe³⁺ ion. The decomposition reaction proceeded at ambient temperature and decomposition time was greatly shortened with increasing concentration of Fe³⁺ ion rather than that of H₂O₂. The catalytic action of Fe³⁺ ion was suppressed with increase of HNO₃ concentration. As much as 4 g of the air-dried resin could be decomposed with 8 ml of 30% H₂O₂, and the use of about 60 ml of 30% H₂O₂ resulted in the complete decomposition of organic carbon to CO₂. Absence of any orgnaic carbon in the residual solution will simplify the final disposal.     

Theoretical and experimental investigations of the enantioselective epoxidation of olefins catalyzed by manganese complexes

The enantioselective epoxidation of olefin by Mn^II（R,R-PMCP）(OTf)2, H₂O₂ and H₂SO₄ was explored by DFT calculations and experiments. Theoretical results suggest that [MnV（O）(R,R-PMCP)（SO4）]+species with a triplet ground spin state serves as the active species for the olefin epoxidation. It can be generated by the H₂SO₄ assisted O-O heterolysis of Mn^III（OOH） species. Mn^III-persulfate is also involve...     

Theoretical and experimental investigations of the enantioselective epoxidation of olefins catalyzed by manganese complexes

The enantioselective epoxidation of olefin by Mn^II（R,R-PMCP）(OTf)2, H₂O₂ and H₂SO₄ was explored by DFT calculations and experiments. Theoretical results suggest that [MnV（O）(R,R-PMCP)（SO4）]+species with a triplet ground spin state serves as the active species for the olefin epoxidation. It can be generated by the H₂SO₄ assisted O-O heterolysis of Mn^III（OOH） species. Mn^III-persulfate is also involve...     

New epoxidation of olefins with superoxide anion in the presence of organic sulfur compounds

Epoxidation of olefins such as stilbene and chalcone with superoxide anion in the presence of several sulfur compounds was investigated.     

非血红素铁、锰配合物催化烯烃不对称环氧化反应研究进展

手性环氧化物是重要的有机反应中间体.金属氧化酶催化的氧化反应通常具有高效、高选择性、反应条件温和和绿色的特点,模拟其中的非血红素铁加氧酶设计合成一系列手性四氮铁锰配合物催化烯烃不对称环氧化反应成为获得高产率、高对映选择性的手性环氧化物的一个重要方法.本文综述了近年来非血红素手性四氮铁锰配合物催化烯烃不对称环氧化反应的研究进展及相应的机理研究.     

手性salen(Mn)催化烯烃不对称环氧化反应的研究进展

烯烃的不对称环氧化物通过选择性开环或者官能团的转化,可以生成一系列有价值的手性化合物,被广泛用作医药、农药、香料等精细化学品的合成中间体.手性Mn(salen)金属配合物被证明是烯烃不对称环氧化最有效的催化剂之一.本文综述了近年来均相手性Mn(salen)催化剂、有机聚合物固载的手性Mn(salen)、无机载体固载手性...     

Aerobic epoxidation of olefins catalyzed by the cobalt-based metal-organic framework STA-12(Co)

A Co‐based metal–organic framework (MOF) was investigated as a catalytic material in the aerobic epoxidation of olefins in DMF and exhibited, based on catalyst mass, a remarkably high catalytic activity compared with the Co‐doped zeolite catalysts that are typically used in this reaction. The structure of STA‐12(Co) is similar to that of STA‐12(Ni), as shown by XRD Rietveld refinement and is stable up to 270 °C. For the epoxidation reaction, significantly different selectivities were obtained depending on the substrate. Although styrene was epoxidized with low selectivity due to oligomerization, (E)‐stilbene was converted with high selectivities between 80 and 90 %. Leaching of Co was low and the reaction was found to proceed mainly heterogeneously. The catalyst was reusable with only a small loss of activity. The catalytic epoxidation of stilbene with the MOF featured an induction period, which was, interestingly, considerably reduced by styrene/stilbene co‐epoxidation. This could be traced back to the formation of benzaldehyde promoting the reaction. Detailed parameter and catalytic studies, including in situ EPR and EXAFS spectroscopy, were performed to obtain an initial insight into the reaction mechanism.     

Aerobic epoxidation of olefins catalyzed by MgO–polysilazane–metal complexes

Co, Fe, Ni and Cu complexes of MgO‐supported polysilazane were prepared and found to be able to catalyze the aerobic epoxidation of long‐chain olefins to give corresponding epoxy‐alkanes in the presence of an aldehyde (as reductant) under mild conditions. When the Co complex catalyst was used for the aerobic oxidation of 1‐octene to give 1,2‐epoxy‐hexane, the yield and selectivity could achieve 92% and 100% respectively at 70 °C and under 1‐atm of O₂. The catalyst was very stable, and could be reused several times without any appreciable change in catalytic activity. Copyright © 1999 John Wiley & Sons, Ltd.     

Asymmetric epoxidation of olefins catalyzed by chiral iminium salts generated in situ from amines and aldehydes

[reaction: see text] A new approach for catalytic asymmetric epoxidation of olefins was developed that utilized chiral iminium salts, generated in situ from chiral amines and aldehydes, as catalysts. Epoxidation reactions can be conducted with 20 mol % of amines and aldehydes. The enantioselectivity of epoxides can be up to 65%. This modular approach obviates the difficulties inherent in the preparation and isolation of unstable exocyclic iminium salts.     

Enantioselective epoxidation of olefins catalyzed by Mn (salen)/MCM-41 synthesized with a new anchoring method

New immobilization of the chiral Mn(salen) complex through the complexation of managanese by oxygen atoms of the phenoxyl groups grafted on the surface of MCM-41 leads to a markedly higher ee than for the free complex.     

Microcalorimetric study of the adsorption of PEGylated lysozyme on a strong cation exchange resin

Adsorption of native as well as mono-, di-, and tri-PEGylated lysozyme on Toyopearl Gigacap S-650M in sodium phosphate buffer is studied by isothermal titration calorimetry and by independent adsorption equilibrium measurements at pH 6 and 25°C. The production and separation of PEGylated lysozyme is discussed. Two different PEG sizes are used (5 kDa and 10 kDa) which leads to six different forms of PEGylated lysozyme which were systematically studied. The sodium chloride concentration is varied according to the elution conditions in the production process. The specific enthalpy of adsorption Δh(p)(ads) is determined from the calorimetric and the adsorption equilibrium data. It was found to be exothermal and constant with increasing adsorber loading for native lysozyme. For all PEGylated forms there is an influence of the adsorber loading on Δh(p)(ads) which is found to become more important with increasing PEGylation degree (total molecular weight of conjugated PEG). At low loadings the adsorption of all PEGylated lysozyme forms is exothermal. With increasing loading the adsorption becomes less exothermal and for the species with higher PEGylation degree also endothermal effects are observed at higher loadings. A thermodynamic analysis is carried out by which the enthalpic and entropic contributions to the binding constants are quantified. The findings are discussed on a molecular level. The results provide insight into the adsorption mechanisms of polymer-modified proteins on chromatographic resins.     

Electrodialytic transport properties of cation exchange membranes in the presence of cyclodextrins

After commercial cation exchange membranes (NEOSEPTA) had been immersed in an aqueous cyclodextrin solutions, electrodialysis of a 1:1 mixed solutions of alkaline earth metal ions and sodium chloride was carried out in the presence of cyclodextrins in the desalting side solution. Adsorption of the cyclodextrins in the membrane matrix was confirmed by IR spectrum, X-ray photoelectron spectroscopy (XPS) and the weight increase of each corresponding component of the membranes. As a result of adsorption of the cyclodextrins in the membranes, transport numbers of alkaline earth metal ions relative to sodium ions decreased compared with those of the membranes without cyclodextrins. Water content in the membrane increased and a ratio of calcium ions (alkaline earth metal ions) to sodium ions in the membrane phase decreased after adsorption of the cyclodextrins. This is due to existence of the compounds having hydrophilic outer surface, cyclodextrins, in the membrane matrix. The decrease in the transport number of calcium ions relative to sodium ions was due to both decrease in a ratio of mobility of calcium ions to that of sodium ions and decrease in an ionic ratio of calcium ions to sodium ions in the membrane phase.     

Ruthenium carbonyl complexes in catalytic epoxidation of olefins co‐catalyzed by isobutyl‐aldehyde

The present work shows the catalytic activity of a series of carbonyl ruthenium complexes in the epoxidation of olefins co‐catalyzed by isobutyl‐aldehyde. The complexes display catalytic activity in the epoxidation of the cyclohexene with high selectivity. Copyright © 2006 John Wiley & Sons, Ltd.     

脯氨酸衍生的胺基吡啶四氮锰配合物催化双氧水参与的烯烃不对称环氧化反应（英文）

自然界中存在许多的金属酶,它们参与促进各种各样的氧化反应,例如羟化反应,环氧化反应等.金属酶催化的反应具有催化效率高、反应条件温和、选择性高等优点.受大自然中的金属酶结构及其性质的启发,人们提出了仿生催化氧化的理念,并开始对金属酶进行模拟,致力于发展清洁氧化的反应方式.在过去的几十年中,科学家们设计合成了一系列仿生金属配合物催化剂.例如,利用非手性的乙二胺骨架设计合成出四齿氮配体MEP(N,N'-dimethylN,N'-bis(2-pyridinylmethyl)ethane-1,2-diamine),将其制备成相应的铁配合物催化剂,该铁催化剂可以很好的实现脂肪族烯烃的环氧化,产率高达90%.2003年,Stack小组首次报道了利用手性N,N-二甲基环己二胺骨架衍生的四齿氮配体金属配合物Mn-MCP-(OTf)2(MCP=N,N-dimethyl-N,N-bis(2-pyridylmethyl)cyclohexane-trans-1,2-diamine)催化的不对称环氧化反应.该反应的对映选择性仅仅为10%.因此,发展新型手性四氮配体金属配合物,用于高产率、高对映选择性的不对称环氧化反应,值得进行深入研究.近年来发展的一些含手性二胺骨架的四齿氮配体,例如PDP(2-[[2-(1-(pyridin-2-ylmethyl)-pyrrolidin-2-yl)pyrrolidin-1-yl]methyl]pyridine),被应用到不对称环氧化反应中,但是其手性二胺骨架为联吡咯,价格昂贵,难以制备.这在很大程度上限制了其在不对称合成中的实际应用.因此,利用一些易于合成的手性二胺骨架,发展结构新颖、催化性能优良的四氮金属配合物,成为实现高效、高选择性不对称环氧化反应的关键.在之前的工作基础上,本文以简单易得、价格低廉的天然氨基酸——L-脯氨酸为起始原料,选取吡啶环和含取代基的吡啶环作为侧基氮供体,制备了三种手性四齿氮配体.随后,我们利用新发展的手性四齿氮配体,合成了相应的锰配合物,并且分别将其运用于烯烃不对称环氧化反应中,仔细评估了这些锰金属配合物的催化性能.建立了以0.2 mol%的锰配合物为催化剂,0.5当量的2,2-二甲基丁酸为添加剂,30%双氧水为氧化剂,反应温度为–30 oC,乙腈为溶剂的催化不对称环氧化反应体系.反应结果显示:该催化剂催化的不对称环氧化反应底物适用性广泛,其中苯乙烯、苯并吡喃、烯酰胺等化合物均可以被成功地转化为相应的环氧化物,得到中等至优异的对映选择性(产率最高可达95%,对映选择性最高可达99%).     

Carbocyclization in natural products—I: Amberlite IR-120 cation exchange resin catalyzed cyclization of costunolide. Structure of β-cyclocostunolide

A simple and efficient method of cyclization of costunolide leading to the isolation of pure β-cyclocostunolide is described. Evidence leading to the assignment of absolute stereostructure 4 to β-cyclocostunolide is presented.