A Strategy for Constructing Pore-Space-Partitioned MOFs with High Uptake Capacity for C2 Hydrocarbons and CO2

Introduction of pore partition agents into hexagonal channels of MIL-88 type (acs topology) endows materials with high tunability in gas sorption. Here, we report a strategy to partition acs framework into pacs (partitioned acs) crystalline porous materials (CPM). This strategy is based on insertion of in situ synthesized 4,4′-dipyridylsulfide (dps) ligands. One third of open metal sites in the acs net are retained in pacs MOFs; two thirds are used for pore-space partition. The Co₂V-pacs MOFs exhibit near or at record high uptake capacities for C₂H₂, C₂H₄, C₂H₆, and CO₂ among MOFs. The storage capacity of C₂H₂ is 234 cm³ g⁻¹ (298 K) and 330 cm³ g⁻¹ (273 K) at 1 atm for CPM-733-dps (the Co₂V-BDC form, BDC=1,4-benzenedicarboxylate). These high uptake capacities are accomplished with low heat of adsorption, a feature desirable for low-energy-cost adsorbent regeneration. CPM-733-dps is stable and shows no loss of C₂H₂ adsorption capacity following multiple adsorption–desorption cycles.     

Highly Porous Metalloporphyrin Covalent Ionic Frameworks with Well-Defined Cooperative Functional Groups as Excellent Catalysts for CO2 Cycloaddition

The development of multifunctional heterogeneous catalysts with high porosity and remarkable catalytic activity still remains a challenge. Herein, four highly porous metalloporphyrin covalent ionic frameworks (CIFs) were synthesized by coupling 5,10,15,20-tetrakis(4-nitrophenyl)porphyrin (TNPP) with 3,8-diamino-6-phenylphenanithridine (NPPN) or 5,5′-diamino-2,2′-bipyridine (NBPy) followed by ionization with bromoethane (C₂H₅Br) or dibromoethane (C₂H₄Br₂) and then metalization with Zn or Co. The resulting CIFs showed high efficiency in catalyzing the cycloaddition of propylene oxide (PO) with CO₂ to form propylene carbonate (PC). All of the Zn-containing CIF catalysts were able to catalyze the cycloaddition reaction with a PC yield greater than 97 %. The TNPP/NBPy (CIF2) catalyst ionized with C₂H₄Br₂ and metalized with Zn (Zn-CIF2-C₂H₄) exhibited the highest catalytic activity among the synthesized catalysts. The high catalytic performance of Zn-CIF2-C₂H₄ is related to its high porosity (577 m² g⁻¹), high Br:metal ratio (1:3.89), and excellent synergistic action between the Lewis acidic Zn sites and the nucleophilic Br⁻ ions. Zn-CIF2-C₂H₄ is sufficiently stable that greater than 94 % PC yield could be obtained even after six cycles. In addition, Zn-CIF2-C₂H₄ could catalyze the cycloaddition of several other epoxides with CO₂. These highly porous materials are promising multifunctional and efficient catalysts for industrially relevant reactions.     

Ultramicroporous Building Units as a Path to Bi‐microporous Metal–Organic Frameworks with High Acetylene Storage and Separation Performance

A strategy called ultramicroporous building unit (UBU) is introduced. It allows the creation of hierarchical bi‐porous features that work in tandem to enhance gas uptake capacity and separation. Smaller pores from UBUs promote selectivity, while larger inter‐UBU packing pores increase uptake capacity. The effectiveness of this UBU strategy is shown with a cobalt MOF (denoted SNNU‐45) in which octahedral cages with 4.5 Å pore size serve as UBUs. The C₂H₂ uptake capacity at 1 atm reaches 193.0 cm³ g^?1 (8.6 mmol g^?1) at 273 K and 134.0 cm³ g^?1 (6.0 mmol g^?1) at 298 K. Such high uptake capacity is accompanied by a high C₂H₂/CO₂ selectivity of up to 8.5 at 298 K. Dynamic breakthrough studies at room temperature and 1 atm show a C₂H₂/CO₂ breakthrough time up to 79 min g^?1, among top‐performing MOFs. Grand canonical Monte Carlo simulations agree that ultrahigh C₂H₂/CO₂ selectivity is mainly from UBU ultramicropores, while packing pores promote C₂H₂ uptake capacity.     

Molecular Sieving of Propyne/Propylene by a Scalable Nanoporous Crystal with Confined Rotational Shutters

Soft porous coordination polymers (PCPs) have the remarkable ability to recognize similar molecules as a result of their structural dynamics. However, their guest-induced gate-opening behaviors often lead to issues with selectivity and separation efficiency, as co-adsorption is nearly unavoidable. Herein, we report a strategy of a confined-rotational shutter, in which the rotation of pyridyl rings within the confined nanospace of a halogen-bonded coordination framework ( NTU-88 ) creates a maximum aperture of 4.4 Å, which is very close to the molecular size of propyne (C₃H₄: 4.4 Å), but smaller than that of propylene (C₃H₆: 5.4 Å). This has been evidenced by crystallographic analyses and modelling calculations. The NTU-88o (open phase of activated NTU-88 ) demonstrates dedicated C₃H₄ adsorption, and thereby leads to a sieving separation of C₃H₄/C₃H₆ under ambient conditions. The integrated nature of high uptake ratio, considerable capacity, scalable synthesis, and good stability make NTU-88 a promising candidate for the feasible removal of C₃H₄ from C₃H₄/C₃H₆ mixtures. In principle, this strategy holds high potential for extension to soft families, making it a powerful tool for optimizing materials that can tackle challenging separations with no co-adsorption, while retaining the crucial aspect of high capacity.     

Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3H6 Storage Density for Efficient C3H6/C3H8 Separation

Developing porous materials for C₃H₆/C₃H₈ separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C₃H₆ with a record high storage density of 0.818 g mL⁻¹, and concurrently shows high C₃H₆/C₃H₈ selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C₃H₆ but also enable the dense packing of C₃H₆. Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C₃H₆ uptake (2.79 mmol g⁻¹). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C₃H₆/C₃H₈ separation.     

功能化离子液体中Ag纳米微粒的制备及摩擦学性能研究

合成了1-甲基-3-羟乙基咪唑四氟硼酸盐离子液体([C₂OHmim]BF₄)，用红外光谱表征了其结构。以所合成的离子液体作为还原剂、稳定剂与反应介质制备了Ag纳米微粒，用XRD和TEM对微粒的结构和形貌进行了表征。在四球摩擦磨损实验机上研究了[C₂OHmim]BF₄离子液体及掺入Ag纳米微粒后的离子液体的摩擦学性能。掺入银纳米微粒后，离子液体在高载荷下的润滑性有了大幅的改善。用SEM和XPS分别对磨痕表面的形貌和元素组成、化学状态进行了分析，结果表明：在低、高载荷分别起润滑作用的是有机膜和金属-有机复合膜。     

The investigation of acid effect on chemical polymerization of indole

The present study investigates the effects of Lewis acid and protonic acid on the chemical polymerization of indole using electrical conductivity measurements and nuclear magnetic resonance, UV–visible, and Fourier transform infrared spectroscopy techniques. These effects are explained by theoretical calculations on the basis of molecular mechanic (MM+) and semi-empirical Austin Model 1 methods. As a result, it has been shown that indole interacts with proton and Lewis acids by the way of different mechanisms. Theoretical research has demonstrated that while BF₃, a Lewis acid, adds to the N atom in the indole, which has a basic character due to its lone-pair electrons, proton, H⁺ adds to the indole ring on C₃ atom. These additions affect both the polymerization of indole and the conductivity of polyindole. Polyindole conductivity is increased by BF₃ addition and decreased by H⁺ addition.     

Synthesis of new boron complexes: application to transfer hydrogenation of acetophenone derivatives

Two new boron complexes were synthesized from N‐[3‐(methylmercapto)aniline]‐3,5‐di‐tert‐butylsalicylaldimine ( LH ) with boron reagent BPh₃ or BF₃.Et₂O. These boron complexes are stable and easily soluble in protic solvents such as ethanol (C₂H₅OH) but hardly soluble in nonprotic solvents such as chloroform (CHCl₃), dichloromethane (CH₂Cl₂) and tetrahydrofuran (THF). All new boron complexes have been fully characterized by both analytical and spectroscopic methods. The catalytic activities of complexes [LBPh₂], 2 , and [LBF₂], 3 , in the transfer hydrogenation of acetophenone derivatives were tested. Stable boron complexes were found to be efficient catalysts in the transfer hydrogenation of aromatic ketones in good conversions up to 99% in the presence of iso‐PrOH/KOH. Copyright © 2011 John Wiley & Sons, Ltd.     

Sorption and Textural Properties of Activated Carbon Derived from Charred Beech Wood

The aim of this study was to prepare activated carbon materials with different porous structures. For this purpose, the biomass precursor, beech wood, was carbonized in an inert atmosphere, and the obtained charcoal was physically activated using carbon dioxide at 1273 K. Different porous structures were obtained by controlling the time of the activation process. Prepared materials were characterized in terms of textural (N₂ sorption at 77 K), structural (XRD), and sorption properties (CO₂, C₂H₄, C₄H₁₀). The shortest activation time resulted in a mostly microporous structure, which provided a high sorption of CO₂. Increasing the activation time led to an increasing of the pores’ diameters. Therefore, the highest ethene uptake was obtained for the material with an intermediate activation time, while the highest butane uptake was obtained for the material with the highest activation time.     

The Reactivity of Isomeric Nitrenium Lewis Acids with Phosphines,Carbenes, and Phosphide

Alkylation of spiro[fluorene-9,3’-indazole] at N(1) and N(2) with tBuCl affords the nitrenium cations [C₆H₄N₂(tBu)C(C₁₂H₈)][BF₄], 1 and 2 , respectively. Compound 1 converts to 2 over the temperature range 303–323 K with a free energy barrier of 28±5 kcal mol⁻¹. Reaction of 1 with PMe₃ afforded the N-bound phosphine adduct [C₆H₄N(tBu)N(PMe₃)C(C₁₂H₈)]BF₄] 3 . However, phosphines attack 2 at the para-carbon atom of the aryl group with concurrent cleavage of N(2)−C(1) bond and proton migration to C(1) affording [(R₃P)C₆H₃NN(tBu)CH(C₁₂H₈)][BF₄] (R=Me 4 , nBu 5 ). Analogous reactions of 1 and 2 with the carbene SIMes prompt attack at the para-carbon with concurrent loss of H^. affording the radical cation salts [(SIMes)C₆H₃N(tBu)NC(C₁₂H₈)^.][BF₄] 6 and [(SIMes)C₆H₃NN(tBu)C(C₁₂H₈)^.][BF₄] 7 , whereas reaction of 2 with BAC gives the Lewis acid-base adduct, [C₆H₄N(BAC)N(tBu)C(C₁₂H₈)][BF₄] 8 . Finally, reactions of 1 and 2 with KPPh₂ result in electron transfer affording (PPh₂)₂ and the persistent radicals C₆H₄N(tBu)NC(C₁₂H₈)^. and C₆H₄NN(tBu)C(C₁₂H₈)^.. The detailed reaction mechanisms are also explored by extensive DFT calculations.     

Synthesis,Structure, and Reactivity of RuII Complexes with Trimethylsilylethinylamidinate Ligands

The mononuclear amidinate complexes [(η⁶‐cymene)‐RuCl( 1a )] ( 2 ) and [(η⁶‐C₆H₆)RuCl( 1b )] ( 3 ), with the trimethylsilyl‐ethinylamidinate ligands [Me₃SiC≡CC(N‐c‐C₆H₁₁)₂]^– ( 1a^– ) and[Me₃SiC≡CC(N‐i‐C₃H₇)₂]^– ( 1b^– ) were synthesized in high yields by salt metathesis. In addition, the related phosphane complexes[(η⁵‐C₅H₅)Ru(PPh₃)( 1b )] ( 4a ) [(η⁵‐C₅Me₅)Ru(PPh₃)( 1b )] ( 4b ), and [(η⁶‐C₆H₆)Ru(PPh₃)( 1b )](BF₄) ( 5 ‐BF₄) were prepared by ligand exchange reactions. Investigations on the removal of the trimethyl‐silyl group using [Bu₄N]F resulted in the isolation of [(η⁶‐C₆H₆)Ru(PPh₃){(N‐i‐C₃H₇)₂CC≡CH}](BF₄) ( 6 ‐BF₄) bearing a terminal alkynyl hydrogen atom, while 2 and 3 revealed to yield intricate reaction mixtures. Compounds 1a / b to 6 ‐BF₄ were characterized by multinuclear NMR (¹H, ¹³C, ³¹P) and IR spectroscopy and elemental analyses, including X‐ray diffraction analysis of 1b , 2 , and 3 .     

A Mild and Highly Efficient Catalyst for Beckmann Rearrangement, BF3·OEt2

BF₃·OEt₂ (Boron trifluoride etherate), an inexpensive and commercially easily available Lewis acid stoichiometrically employed for Beckamann rearrangement in general, was now found to efficiently catalyze Beckmann rearrangement of ketoximes into their corresponding amides (up to 99% yield) in anhydrous acetonitrile under reflux temperature.     

Control of pore environment in highly porous carbon materials for C2H6/C2H4 separation with exceptional ethane uptake

Adsorptive separation of C₂H₆ from C₂H₄ by adsorbents is an energy-efficient and promising method to boost the polymer grades C₂H₄ production. However, that C₂H₆ and C₂H₄ display very similar physical properties, making their separation extremely challenging. In this work, by regulating the pore environment in a family of chitosan-based carbon materials (C-CTS-1, C-CTS-2, C-CTS-4, and C-CTS-6)- we target ultrahigh C₂H₆ uptake and C₂H₆/C₂H₄ separation, which exceeds most benchmark carbon materials. Explicitly, the C₂H₆ uptake of C-CTS-2 (166 cm³/g at 100 kPa and 298 K) has the second-highest adsorption capacity among all the porous materials. In addition, C-CTS-2 gives C₂H₆/C₂H₄ selectivity of 1.75 toward a 1:15 mixture of C₂H₆/C₂H₄. Notably, the adsorption enthalpies for C₂H₆ in C-CTS-2 are low (21.3 kJ/mol), which will facilitate regeneration in mild conditions. Furthermore, C₂H₆/C₂H₄ separation performance was confirmed by binary breakthrough experiments. Under different ethane/ethylene ratios, C-CTS-X extracts a low ethane concentration from an ethane/ethylene mixture and produces high-purity C₂H₄ in one step. Spectroscopic measurement and diffraction analysis provide critical insight into the adsorption/separation mechanism. The nitrogen functional groups on the surface play a vital role in improving C₂H₆/C₂H₄ selectivity, and the adsorption capacities depend on the pore size and micropore volume. Moreover, these robust porous materials exhibit outstanding stability (up to 800 °C) and can be easily prepared on a large scale (kg) at a low cost (～$26 per kg), which is very significant for potential industrial applications.     

Crossover Sorption of C2H2/CO2 and C2H6/C2H4 in Soft Porous Coordination Networks

Porous sorbents are materials that are used for various applications, including storage and separation. Typically, the uptake of a single gas by a sorbent decreases with temperature, but the relative affinity for two similar gases does not change. However, in this study, we report a rare example of “crossover sorption,” in which the uptake capacity and apparent affinity for two similar gases reverse at different temperatures. We synthesized two soft porous coordination polymers (PCPs), [Zn₂(L1)(L2)₂]_n (PCP-1) and [Zn₂(L1)(L3)₂]_n (PCP-2) (L1= 1,4-bis(4-pyridyl)benzene, L2=5-methyl-1,3-di(4-carboxyphenyl)benzene, and L3=5-methoxy-1,3-di(4-carboxyphenyl)benzene). These PCPs exhibits structural changes upon gas sorption and show the crossover sorption for both C₂H₂/CO₂ and C₂H₆/C₂H₄, in which the apparent affinity reverse with temperature. We used in situ gas-loading single-crystal X-ray diffraction (SCXRD) analysis to reveal the guest inclusion structures of PCP-1 for C₂H₂, CO₂, C₂H₆, and C₂H₄ gases at various temperatures. Interestingly, we observed three-step single-crystal to single-crystal (sc-sc) transformations with the different loading phases under these gases, providing insight into guest binding positions, nature of host–guest or guest-guest interactions, and their phase transformations upon exposure to these gases. Combining with theoretical investigation, we have fully elucidated the crossover sorption in the flexible coordination networks, which involves a reversal of apparent affinity and uptake of similar gases at different temperatures. We discovered that this behaviour can be explained by the delicate balance between guest binding and host–guest and guest-guest interactions.     

Synthesis of Pyridine N‐Oxide–BF2CF3 Complexes and Their Fluorescence Properties

Pyridine N‐oxide–BF₂CF₃ and –BF₂C₂F₅ complexes and their derivatives were synthesized. Most of the complexes show fluorescence both in solution and in the solid state. By expanding the π‐conjugated skeleton, the color of the fluorescence could be changed dramatically. A fluorophore with a high solvent dependency could also be produced. Since such compounds can be synthesized on a gram scale in high yield, and are stable to oxygen, water, and heat, the complexes hold great potential as organic functional materials.     

Fe3O4@NCs/BF0.2: A magnetic bio‐based nanocatalyst for the synthesis of 2,3‐dihydro‐1H‐perimidines

Nanocellulose (NC) materials have some unique properties, which make them attractive as organic or inorganic supports for catalytic applications. Nanocatalysts with diameters of less than 100 nm are difficult to separate from the reaction mixture, therefore, magnetic nanoparticles (MNPs) were used as catalysts to overcome this problem. Fe₃O₄@NCs/BF_0.2 as a green, bio‐based, eco‐friendly, and recyclable catalyst was synthesized and characterized using fourier‐transform infrared spectroscopy (FT‐IR), vibrating sample magnetometer (VSM), X‐ray diffraction (XRD), X‐ray fluorescence (XRF), Brunauer–Emmett–Teller (BET), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), and thermal gravimetric analysis (TGA) techniques. Fe₃O₄@NCs/BF_0.2 was employed for the synthesis of 2,3‐dihydro‐1H‐perimidine derivatives via a reaction of 1,8‐diaminonaphthalene with various aldehydes at room temperature under solvent‐free conditions. The present procedure offers several advantages including a short reaction time, excellent yields, easy separation of catalyst, and environmental friendliness.     

New Microporous Materials for Acetylene Storage and C2H2/CO2 Separation: Insights from Molecular Simulations

Force‐field based grand‐canonical Monte Carlo simulations are used to investigate the acetylene and carbon dioxide uptake capacity, as well as the C₂H₂/CO₂ adsorption selectivity of three novel microporous materials: Magnesium formate, Cu₃(btc)₂, and cucurbit[6]uril. Because no comparable computational studies of acetylene adsorption have been reported so far, the study focuses on systems for which experimental data are available to permit a thorough validation of the simulation results. The results for magnesium formate are in excellent agreement with experiment. The simulation predicts a high selectivity for acetylene over CO₂, which can be understood from a detailed analysis of the structural features that determine the affinity of Mg‐formate towards C₂H₂. For Cu₃(btc)₂, preliminary calculations reveal the necessity to include the interaction of the sorbate molecules with the unsaturated metal sites, which is done by means of a parameter adjustment based on ab‐initio calculations. In spite of the high C₂H₂ storage capacity, the C₂H₂/CO₂ selectivity of this material is very modest. The simulation results for the porous organic crystal cucurbit[6]uril show that the adsorption characteristics that have been observed experimentally, particularly the very high isosteric heat of adsorption, cannot be understood when an ideal structure is assumed. It is postulated that structural imperfections play a key role in determining the C₂H₂ adsorption behavior of this material, and this proposition is supported by additional calculations.     

A Microporous Metal-Organic Framework with Unique Aromatic Pore Surfaces for High Performance C2H6/C2H4 Separation

Developing adsorptive separation processes based on C₂H₆-selective sorbents to replace energy-intensive cryogenic distillation is a promising alternative for C₂H₄ purification from C₂H₄/C₂H₆ mixtures, which however remains challenging. During our studies on two isostructural metal–organic frameworks ( Ni-MOF 1 and Ni-MOF 2 ), we found that Ni-MOF 2 exhibited significantly higher performance for C₂H₆/C₂H₄ separation than Ni-MOF-1 , as clearly established by gas sorption isotherms and breakthrough experiments. Density-Functional Theory (DFT) studies showed that the unblocked unique aromatic pore surfaces within Ni-MOF 2 induce more and stronger C−H⋅⋅⋅π with C₂H₆ over C₂H₄ while the suitable pore spaces enforce its high C₂H₆ uptake capacity, featuring Ni-MOF 2 as one of the best porous materials for this very important gas separation. It generates 12 L kg⁻¹ of polymer-grade C₂H₄ product from equimolar C₂H₆/C₂H₄ mixtures at ambient conditions.     

Synthesis of diesters by addition of acids to 5-alkoxycarbonylnorborn-2-ene and related 5-methyl derivatives

The addition of saturated aliphatic acids C₁?CC₅ to 5-alkoxycarbonylnorborn-2-enes and 5-methyl-5-alkoxycarbonylnorborn-2-enes in the presence of catalyst BF₃·O(C₂H₅)₂ was studied and new representatives of the norbornane hydroxyacids diesters were synthesized.     

The effect of N-heterocyclic carbene ligands in the palladium-catalyzed cross-coupling reaction of K[C6F5BF3] with aryl iodides and aryl bromides

The effect of N-heterocyclic carbene (NHC) ligands on the catalytic activity of in situ generated palladium complexes in the model cross-coupling reaction of K[C₆F₅BF₃] with 4-FC₆H₄I was studied. Based on the obtained results, a series of pentafluorobiphenyls C₆F₅C₆H₄X were prepared from K[C₆F₅BF₃] and XC₆H₄I or 4-CF₃C₆H₄Br in high yields under aerobic conditions.