Preparation, Characterization and Catalytic Performance of La-SO4/SBA-15 in Esterification of Acetic Acid with n-Butanol

La-SO42-/SBA-15 was synthesized with various amounts of lanthanum via incipient-wetness impregnation. Characterization was done by X-ray diffraction（XRD）, transmission electron micrographs（TEM）, nitrogen adsorption, FTIR spectroscopic analysis, thermogravimetric analysis, and the total amount of acidity of catalyst was estimated by TPD of NH3. The results indicate that lanthanum has been incorporated into SBA-15 molecular sieve. The prepared materials（La-SO42-/SBA-15） keep the highly ordered mesoporous two-dimensional hexagonal structure and do not change the mesoporous channel structure of the support SBA-15. The catalyst showed best catalytic activity in the synthesis of n-butyl acetate. The optimum conditions of the esterification by orthogonal experiments were studied： the molar ratio of n-butanol to acetic acid 1：1.2, the amount of catalyst 7.5%, reaction time 80 min. The yield of n-butyl acetate could reach 93.2% under the optimum conditions. The catalyst was recyclable, cost effective and environmental friendly.     

硬模板法合成磁性石墨化介孔碳及在中药废水吸附处理中的应用

以SBA-15为模板, 蔗糖为碳源, 硝酸铁辅助催化合成磁性石墨化介孔碳复合材料(Fe/GMC). 利用X射线粉末衍射(XRD)、透射电子显微镜(TEM)、N₂吸附-脱附(BET)、拉曼光谱等对反应产物进行了表征. 硝酸铁辅助催化可以在较低碳化温度(900℃)下实现介孔碳的部分石墨化, 并同步生成磁性Fe₃O₄颗粒, 合成的产物比表面积大、孔道有序、磁性强. 运用紫外-可见(UV-Vis)光谱考察了该复合材料对中药红花色素废水的吸附特性,复合材料的吸附速率快、吸附量高, 具有良好的脱色效果并能实现吸附剂的快速固液磁分离.     

金复合介孔SBA-15吸附血红蛋白在H2O2电催化反应中的应用

以P123嵌段共聚物表面活性剂为模板剂制备介孔氧化硅SBA-15,并用沉积-沉淀(DP)法在SBA-15介孔表面负载纳米Au颗粒制备得到金复合介孔SBA-15材料(Au-SBA-15).再以Au-SBA-15材料制备玻碳修饰电极,将血红蛋白固定于修饰电极上用循环伏安法考察其对不同浓度H2O2溶液的电催化反应.在固定了血红蛋白的Hb/Au-SBA-15/GC修饰电极上,H2O2在+0.95 V处出现了氧化峰,且随着H2O2浓度的增大峰电流不断增加,说明金复合介孔氧化硅材料具有良好的生物兼容性,有利于血红蛋白的固定,其修饰电极对H2O2溶液具有一定的电催化作用.     

Immobilization of glucose oxidase on rod-like and vesicle-like mesoporous silica for enhancing current responses of glucose biosensors

The use of rod-like and vesicle-like mesoporous SiO₂ particles for fabricating high performance glucose biosensors is reported. The distinctively high surface areas of mesoporous structures of SiO₂ rendered the adsorption of glucose oxidase (GOx) feasible. Both morphologies of SiO₂ enhanced the sensitivities of glucose biosensors, but by a factor of 36 for vesicle-like SiO₂ and 18 for rod-like SiO₂, respectively. The greater enhancement of vesicle-like SiO₂ can be accounted for by its higher specific surface area (509 m² g⁻¹) and larger total pore volume (1.49 cm³ g⁻¹). Interestingly, the current responses of GOx immobilized in interior channels of the mesoporous SiO₂ were enhanced much more than those of simple mixtures of GOx and the mesoporous SiO₂. This suggests that the enhancement of current responses arise not only from the high surface area of SiO₂ for high enzyme loading, but also from the improved enzyme activity upon its adsorption on mesoporous SiO₂. Also compared were the performances of glucose biosensors with GOx immobilized on mesoporous SiO₂ by physical adsorption and by covalent binding to 3-aminopropyltrimethoxysilane (APTMS) modified SiO₂ using glutaraldehyde as the cross-linker. The covalent binding approach resulted in higher enzyme loading but lower current sensitivity than with the physical adsorption.     

Photocatalytic decomposition of orange II over TiO2-loaded on SBA-15 prepared using a microwave process

SBA-15 mesoporous material was prepared by microwave-hydrothermal method and was used as support in TiO₂-loaded SBA-15 photocatalysts. The physical properties of these particles were investigated. We also examined the activity of these samples as photocatalysts for the decomposition of orange II. Titania loaded on a silica matrix decreases the surface area of the support as expected for TiO₂ incorporation. For TiO₂-loaded SBA-15 photocatalysts, the IR absorption at ∼960 cm⁻¹ commonly accepted as the characteristic vibration of the Ti-O-Si bond. The photocatalytic activity increases with an increase of the TiO₂ loading.     

嫁接法制备Ni/SBA-15催化剂的催化氯苯加氢脱氯

SBA-15表面经嫁接方式引入氨基官能团,与Ni络合制备了SBA-15负载的Ni催化剂(Ni/SBA-15N)。同时,采用传统的浸渍法制备了具有相似Ni负载量的催化剂(Ni/SBA-15)。在负载量相近条件下,Ni/SBA-15N的Ni颗粒分散性均高于Ni/SBA-15。XRD和TPR结果表明,催化剂焙烧后,在氨化SBA-15表面,Ni以硅酸镍形式存在,而在SBA-15表面,Ni以NiO形式存在。Ni/SBA-15对氯苯催化加氢脱氯活性不随Ni负载量的变化而变化;而在Ni/SBA-15N中,Ni负载量增加,催化剂活性增加。     

聚乙烯亚胺修饰的氧化硅纳米管基吸附剂的制备及其CO_2吸附应用

以P123为模板,1,2-二(三甲氧基硅基)乙烷(BTME)为硅源合成了介孔氧化硅纳米管(E-SNTs).将ESNTs经过聚乙烯亚胺(PEI)修饰后制得吸附剂用于捕捉CO2.对吸附剂进行了透射电镜(TEM)、物理吸附、傅里叶变换红外(FTIR)光谱、热重分析(TGA)等表征.E-SNTs-PEI吸附剂的最佳CO2吸附温度为75°C.吸附剂的CO2吸附量随着PEI负载量的增加呈现先增大后减小的趋势,其中50%为最佳负载量,此时吸附剂的吸附量最大为3.32 mmol·g-1.相比较SBA-15基吸附剂,E-SNTs基吸附剂具有更优异的吸附性能.在有水汽的存在下,吸附剂E-SNTs-50的CO2吸附量达到3.75 mmol·g-1.经过四次循环吸脱附实验测试E-SNTs-PEI吸附剂的稳定性能,结果表明其CO2吸附量基本不变,该吸附剂表现出较好的稳定性和可再生能力.     

不同结构颗粒对PMMA基复合材料性能影响

采用原位本体聚合法制备PMMA/MCM-41(with template),PMMA/SBA-15(with template),PMMA/SiO2三种复合材料.研究了介孔分子筛MCM-41,SBA-15和SiO2对PMMA复合材料拉伸强度,冲击强度,热稳定性的影响.由于合成介孔分子筛MCM-41,SBA-15时所用的模板剂CTAB和P123分布于孔口处和颗粒表面上,分别与PMMA基体产生物理缠结作用,增加了两者的相容性;且P123(EO20PO70EO20)表面有较大的PO/EO比率,与小分子量的CTAB相比有较强的疏水性,使得PMMA/SBA-15(with template)复合材料的性能要优于PMMA/MCM-41(with template).     

负载型P-Mo-V/SBA-15催化剂上的甲烷选择氧化反应

以磷钼钒杂多酸(H₅PMo₁₀V₂O₄₀)为前驱体、介孔SBA-15为载体, 采用浸渍法制备不同负载量的P-Mo-V氧化物催化剂. 在甲烷选择氧化反应中, 考察了负载量、反应温度、空速等对甲烷转化率和产物选择性的影响. 结果表明, 催化剂对甲烷选择氧化制甲醛具有较高活性, 甲烷转化率随负载量的增大和反应温度的升高而提高, 甲醛的选择性随负载量的增大先升后降. 反应温度为640 ℃、空速为48300 L•kg^－1•h^－1、氧化物负载量w＝2.89%时, 甲醛的时空产率最高(295 g•kg_cat^－1•h^－1). 多种表征表明, 氧化物负载量w≤2.89%时, P-Mo-V氧化物在载体介孔孔道内以高分散形式存在. 催化剂的酸性和氧化还原性质与负载量相关, NH₃-TPD和H₂-TPR的测试结果表明, 较弱的酸性位和较低还原温度的活性组分有利于甲烷选择氧化制甲醛.     

连续在线原位ATR-FTIR技术测定介孔CuAl2O4对黄药的吸附

以丁胺和正十二醇为混合模板剂, 采用共沉淀法制备了介孔纳米CuAl₂O₄. 用X射线粉末衍射(XRD)、傅里叶变换红外(FTIR)光谱、N₂吸附-脱附对产物的结构进行了表征. 采用连续在线原位衰减全反射傅里叶变换红外(ATR-FTIR)光谱技术研究了水溶液中丁基和辛基黄药在介孔CuAl₂O₄表面的吸附. 随着吸附时间的延长,1200 和1040 cm^-1两处黄药特征峰的高度逐渐增加, 根据1200 cm^-1处C-O-C伸缩振动峰的变化来评价黄药在CuAl₂O₄表面的吸附动力学过程. 结果表明, 介孔纳米CuAl₂O₄对黄药有很强的吸附能力, 在100 min 的时间内, CuAl₂O₄样品对丁基和辛基黄药的吸附量分别达到了236 和300 mg·g^-1, 且属于化学吸附. 对实验数据进行理论模拟, 发现吸附过程更接近于拟二级吸附动力学方程.     

氨基功能化SBA-16对CO_2的动态吸附特性

采用浸渍法将四乙烯五胺(TEPA)负载到介孔分子筛SBA-16的孔道内,形成功能化的介孔材料用于CO2的吸附.利用X射线衍射(XRD)、透射电镜(TEM)、氮气物理吸附-脱附和热重分析(TGA)等方法对样品进行了表征.通过动态吸附对不同TEPA浸渍量的SBA-16的CO2吸附性能和再生性能进行研究.结果表明:修饰后的SBA-16仍然保持有序的孔道结构,但样品的孔道有序度降低,比表面积、孔容、平均孔径都减小.样品对CO2的饱和吸附容量和穿透吸附容量随着TEPA浸渍量的增加而增加.60℃时,30%TEPA浸渍量的样品的穿透吸附容量和饱和吸附容量达到最大,分别为0.625和0.973mmol·g-1.在60-80℃,样品的动态吸附性能稳定.经过20次吸附-脱附循环后,样品的饱和吸附容量仅降低了6.45%.采用失活模型对CO2的吸附穿透曲线进行模拟,该模型能够很好地模拟样品对CO2的吸附过程.     

Iron oxide nanoparticles within the pore system of mesoporous SBA-15 in different acidity: the synthesis and characterization

Direct hydrothermal method is employed for incorporating iron into the pore structure of SBA-15. The resultant materials were analyzed by X-ray diffraction (XRD) patterns, N₂ sorption isotherm and X-ray photoelectron spectroscopy (XPS). The characterizations of XRD patterns and XPS revealed that iron nanoparticles were present as highly dispersed nanoclusters in the well-ordered mesoporous channels of SBA-15. The characterizations of t-plot reveal only microporous channels of SBA-15 are confirmed to be filled with iron nanoparticles, leaving the mesopores unaffected. The supported material still maintained its ordered mesoporous structure similar to SBA-15 and possessed high surface area, large pore volume and uniform pore size.     

Heterogeneous strong base catalysis in supercritical carbon dioxide by mesoporous alumina and sulfated mesoporous alumina

The development of solid strong base catalysts utilizable in green but acidic medium of scCO₂ is reviewed. The strong base sites on mesoporous alumina and sulfated mesoporous alumina that had been generated by severe treatment at 773 K under vacuum (10^?4 Torr) were not neutralized by the compressed Lewis acidic molecules of CO₂, promoting a representative strong base-catalyzed reaction of the Tishchenko reaction as well as a typical base-catalyzed reaction of the Knoevenagel reaction in scCO₂. Infrared spectroscopy of the adsorbed pyrrole, temperature-programmed desorption of CO₂, and the poisoning by a very weak Brönsted acid of methanol have revealed that the average strengths of the base sites on mesoporous alumina and sulfated mesoporous alumina are weaker than that on conventional γ-alumina like JRC-ALO-4, but that they have a small number of strong base sites which function even in scCO₂ medium. It was found that the addition of a slight amount of THF cosolvent into scCO₂ remarkably accelerates the Tishchenko reaction over sulfated mesoporous alumina; the reaction rate in the scCO₂–THF medium was 1.5-fold and 2-fold faster than those in ordinary organic solvents such as benzene and THF and that in pure scCO₂, respectively. The unique structures of mesoporous alumina and sulfated mesoporous alumina have been fully characterized by N₂ adsorption–desorption measurements and XRD analyses.     

Static and dynamic sorption study of heavy metal ions on amino-functionalized SBA-15

Amino-functionalized SBA-15 mesoporous silica (SBA-15-NN) was synthesized using the normal grafting procedure of SBA-15 with [3-(2-Aminoethyl) aminopropyl] trimethoxysilane. Under optimal conditions, SBA-15-NN exhibited a higher adsorption capacity toward metal ions than SBA-15 in static adsorption. The results showed that the flow rate of 2?mL?min^?1 might be the optimum flow rate in dynamic adsorption, and the higher initial metal ion concentration is favorable for the adsorption of Zn(II), Co(II), and Ni(II) onto SBA-15-NN. The results indicated that SBA-15-NN could effectively remove multiple metal ions from aqueous solution as a good adsorption material.     

A mass spectrometric method to determine activities of enzymes involved in polyamine catabolism

An analytical method for the determination of three polyamines (putrescine, spermidine, and spermine) and five acetylpolyamines [N¹-acetylspermidine (N¹AcSpd), N⁸-acetylspermidine (N⁸AcSpd), N¹-acetylspermine, N¹,N⁸-diacetylspermidine, and N¹,N¹²-diacetylspermine] involved in the polyamine catabolic pathway has been developed using a hybrid tandem mass spectrometer. Heptafluorobutyryl (HFB) derivatives of these compounds and respective internal standards labeled with stable isotopes were analyzed simultaneously by TOF MS, based on peak areas appearing at appropriate m/z values. The isomers, N¹AcSpd and N⁸AcSpd were determined from their fragment ions, the acetylamidopropyl and acetylamidobutyl groups, respectively, using MS/MS with ¹³C₂-N¹AcSpd and ¹³C₂-N⁸AcSpd which have the ¹³C₂-acetyl group as an internal standard. The TOF MS method was successfully applied to measure the activity of enzymes involved in polyamine catabolic pathways, namely N¹-acetylpolyamine oxidase (APAO), spermine oxidase (SMO), and spermidine/spermine N¹-acetyltransferase (SSAT). The following natural substrates and products labeled with stable isotopes considering the application to biological samples were identified; for APAO, [4,9,12-¹⁵N₃]-N¹-acetylspermine and [1,4,8-¹⁵N₃]spermidine (¹⁵N₃-Spd), respectively; for SMO, [1,4,8,12-¹⁵N₄]spermine and ¹⁵N₃-Spd, respectively; and for SSAT, ¹⁵N₃-Spd and [1,4,8-¹⁵N₃]-N¹-acetylspermidine, respectively.     

具有双孔径分布的介孔C-Al2O3-TiO2纳米复合材料的合成及其红外发射率

以嵌段共聚物F127 (PEO₁₀₆PPO₇₀PEO₁₀₆, M_W=12600)为模板剂, 异丙醇铝和钛酸四丁酯为金属源, 低分子量的酚醛树脂为碳源, 通过溶胶-凝胶三元共组装法合成了具有双孔径分布的C-Al₂O₃-TiO₂纳米复合材料.用X射线衍射(XRD)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)及N₂吸附-脱附对该复合材料进行结构表征. 结果显示, 当铝钛原子的摩尔比为1:10 时, 对应的纳米复合材料具有较好的有序介孔结构, 其双孔径分别为3.9和6.5 nm, 比表面积可达259 m²·g^-1, 孔容0.37 cm³·g^-1. 以三元乙丙橡胶(EPDM)为粘结剂, 与介孔纳米复合材料混合制备涂层. 通过调节复合材料中铝钛摩尔比和涂层厚度, 红外发射率在0.450-0.617之间可调.     

TiO_2/SBA-15的快速合成法及其催化性能

本文针对传统方法合成TiO2/SBA-15的诸多不足,提出了一种简单而快速合成TiO2/SBA-15的方法。利用孔道内水解法快速合成了不同负载量的TiO2/SBA-15。利用XRD、N2-吸脱附、TEM和UV-Vis对样品的晶体结构、微观形貌、光学吸收特性进行了表征,并研究了不同TiO2负载量催化剂对罗丹明B(RhB)光降解活性的影响。结果表明:利用该方法合成的TiO2/SBA-15光催化活性优于传统浸渍方法合成的TiO2/SBA-15与工业上使用的TiO2纳米颗粒。     

Highly ordered Ti-SBA-15: Efficient H2 adsorbent and photocatalyst for eco-toxic dye degradation

Highly ordered 2D-hexagonal mesoporous titanium silicate Ti-SBA-15 materials (space group p6mm) have been synthesized hydrothermally in acidic medium employing amphiphilic tri-block copolymer, Pluronic F127 as structure directing agent. Samples are characterized by powder X-ray diffraction, transmission electron microscopy, scanning electron microscopy, FT IR spectroscopy, UV-visible diffuse reflectance measurements, N₂ adsorption/desorption and TG-DTA analysis. XRD and TEM results suggested the presence of highly ordered mesophase with hexagonal pore arrangements. BET surface area for Ti-SBA-15 (924 m² g⁻¹) is considerably higher than the pure silica SBA-15 (611 m² g⁻¹) prepared following the same synthetic route. UV-visible and FT-IR studies suggested the incorporation of mostly tetrahedral titanium (IV) species, along with some six-coordinated sites in the silicate network. This material shows very good H₂ adsorption capacity at higher pressure and excellent catalytic activity in the photocatalytic degradation of ecologically abundant dye methylene blue.     

H2在K0-MWCNTs上储存和吸附/脱附特性研究

利用高压容积法辅以卸压升温脱附排水法, 测定金属K修饰多壁碳纳米管对H₂的吸附储存容量. 结果表明, 在室温(25 ℃), 7.25 MPa实验条件下, x%K⁰-MWCNTs (x%＝30%～35%, 质量百分数)对H₂的吸附储存容量可达3.80 wt%(质量百分数), 是相同条件下单纯MWCNTs氢吸附储量的2.5倍; 室温下卸至常压的脱附氢量为3.36 wt%(占总吸附氢量的～88%), 后续升温至673 K的脱附氢量为0.41 wt%(占总吸附氢量的～11%). 利用LRS和H₂-TPD-GC/MS等谱学方法对H₂/K⁰-MWCNTs吸附体系的表征研究表明, H₂在K⁰-MWCNTs上吸附存在非解离 (即分子态)和解离(即原子态)两种吸附态; 在≤723 K温度下, H₂/K⁰-MWCNTs体系的脱附产物几乎全为H₂气; 723 K以上高温脱附产物不仅含H₂, 也含有CH₄, C₂H₄和C₂H₂等C₁/C₂-烃.     

Thermal degradation of iron chelate complexes adsorbed on mesoporous silica and alumina

Nanometric Fe₂O₃ particles could be inserted inside the internal pore volume of SBA-15 mesoporous silica and mesoporous alumina supports, when Fe(III) chelates (EDTA, gluconate or citrate) were used as impregnating precursors. The oxidative degradation of the chelating anions was followed by combined TG-DTA. Strong chelate-SiOH interactions (case of bulky EDTA), favored by the mesopore curvature, yield sub-nanometric extremely well dispersed Fe₂O₃ particles preferentially located at the micropore mouths (confinement effect). Fe₂O₃ even more strongly interacts with alumina walls, generating either (Fe,Al)₂O₃ mixed phases or Fe-aluminate micro domains. These iron-based mesoporous alumina composites proved very active catalysts in total oxidation of phenol at ambient conditions, with extremely low iron leaching (0.2%).