Spectrophotometric determination of silver with cadion 2B and triton X-100

A highly sensitive and selective procedure for spectrophotometric determination of silver has been developed. At pH 9.2, in the presence of Triton X-100, silver forms a dark red-violet complex with cadion 2B which has an absorption maximum at 565 nm. The molar absorptivity is 1.0 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for silver in the range 0.02-0.8 mug ml . The colour reaction, if EDTA is used as a masking agent, is free from interference by the 20 cations and 19 anions investigated. Only Cl(-), Br(-), I(-), S(2-) and CN(-) interfere and must be absent. This method has been used to determine silver in waste-water.     

Spectrophotometric determination of micro amounts of cadmium in waste water with cadion and triton X-100

A spectrophotometric method for determination of micro amounts of cadmium in waste water with Cadion and Triton X-100 is described. The interference of foreign ions can be eliminated by masking with an ascorbic acid-Rochelle salt-potassium cyanide-potassium fluoride mixture. After demasking with formalin, cadmium is determined directly in aqueous solution without separation. Beer's law is obeyed for 0-8 mug of Cd in 25 ml of solution. The method is more sensitive than the dithizone method, its apparent molar absorptivity at 480 nm being 1.19 x 10(5) 1. mole(-1). cm(-1). Results obtained by using the proposed method on waste water samples agree well with those obtained by atomic-absorption spectrophotometry.     

Triton X-100存在下镉试剂分光光度法测定痕量铊(III)

本文首次提出了在Triton X-100存在下, 以镉试剂作显色剂于水相直接分光光度法测定了痕量铊, 结果表明: 该体系具有很高的灵敏度, 是目前分光光度法测定铊的最灵敏方法之一.     

Triton X-100增敏光度法测定铝土矿中的微量钪

研究了在HCl溶液中微量钪(Ⅲ)-偶氮氯膦Ⅲ(CPAⅢ)之间的配合反应。结果表明,在0.5mol/LHCl溶液中和TritonX 100的存在下,有色溶液的最大吸收波长为680nm,表观摩尔吸光系数为2.62×104L·mol-1·cm-1。钪(Ⅲ)质量浓度在0～0.45mg/L范围内符合比耳定律,钪(Ⅲ)的加标回收率在98.0%～105.1%之间,RSD(n=6)为2.1%～2.6%。可用于铝土矿中的微量钪的测定。     

Spectrophotometric study of thiocyanato complexation of cobalt(II) and nickel(II) ions in micellar solutions of a nonionic surfactant triton X-100

Complexation of cobalt(II) and nickel(II) with thiocyanate ions has been studied by precise spectrophotometry in aqueous and micellar solutions of a nonionic surfactant Triton X-100 of varying concentrations (20–100 mmol-dm^–3). With regard to cobalt(II), the formation of [Co(NCS)]⁺, [Co(NCS)₂], and [Co(NCS)₄]^2– was established. The formation constant of [Co(NCS)₄]^2–, is increased with increasing concentration of the surfactant, suggesting that the [Co(NCS)₄]^2– complex is formed in micelles. In contrast, the formation constants of [Co(NCS)]⁺ and [Co(NCS)₂] are remained practically unchanged. On the other hand, with nickel(II), the formation of sole [Ni(NCS)]⁺ and [Ni(NCS)₂] was established in both aqueous and micellar solutions examined, their formation constants being also remained unchanged. Interestingly, no higher complex was confirmed in the nickel(II) system, unlike cobalt(II). The unusual affinity of the [Co(NCS)₄]^2– complex with micelles will be discussed from thermodynamic and structural points of view.     

Spectrophotometric determination of copper(II) with carbon disulfide,a secondary amine and triton X-100

Copper(II) is determined by non-extractive spectrophotometry as a complex of butylene dithiocarbamate formed in situ by reaction between carbon disulfide and pyrrolidine in aqueous Triton X-100 medium. This method is similar to that with butylene dithiocarbamate as starting material in the sense of simplicity, sensitivity, precision and accuracy. Pyrrolidine is the best of seven secondary amines tested in this way for copper determinations.     

Adsorption of nonionic surfactant triton X-100 on solids from aqueous and nonaqueous solutions

The adsorption of nonionic surfactant Triton X-100 on quartz sand and methylated quartz sand from water and toluene was investigated by means of spectrophotometry, the radiotracer technique, and wetting angle measurements.     

Photobleaching of bacteriorhodopsin solubilized with triton X-100

In the current studies, we examined the effects of hexagonal lattice formation with lipid membranes on the structural stability of native bacteriorhodopsin (bR). Denaturation kinetic measurements for bR solubilized with the mild nonionic detergent Triton X-100 (TX100) were performed in the dark and under illumination by visible light. The solubilized bR was stable in the dark over a wide concentration range of TX100 (1 to 200 mM). In purple membranes, a bilobed band was observed in visible circular dichroism spectra due to interactions between neighboring chromophores. At all concentrations of TX100, this was replaced by a single positive band. Upon illumination with visible light, TX100-solubilized bR clearly showed photobleaching to bacterioopsin. These experimental results suggest that photobleaching is due to a lack of intermolecular interactions inside the purple membrane lattice. Extensive kinetic measurements further revealed that the rate constant of photobleaching is strongly dependent on the detergent concentration, although the activation energy for photobleaching does not significantly change with the TX100 concentration. The mechanism of photobleaching for the solubilized bR is discussed with respect to detergent micelle properties.     

Spectrophotometric determination of iron as phenylfluorone complex sensitized with Triton X-100

Summary The effect of some surfactants and protective colloids on the absorbance of the iron(III)-phenylfluorone complex has been investigated. The binary complex formed at pH 9.0 show a molar absorptivity of 7.5×10⁴ l · mol^–1 · cm^–1 at 530 nm. In the presence of 2% Triton X-100, at the same pH, the molar absorptivity of the sensitized complex was 1.19×10⁵ l · mo^–1 · cm^–1 at 555 nm. Full colour development of the sensitized complex occurred within 25 min and Beer's law was followed up to 0.53 ppm of iron. The molar ratio and continuous variation methods indicated a 13 metal-ligand ratio for the sensitized complex. The effect of various amounts of different ions has been studied under the experimental conditions and some masking agents were recommended. The method has been applied to the determination of iron in copper and nickel metals and some non-ferrous alloys.

---

Spektralphotometrische Bestimmung von Eisen als Phenylfluoronkomplex sensibilisiert mit Triton X-100

     

One-pot multicomponent synthesis hexahydroquinoline derivatives in Triton X-100 aqueous micellar media

A facile and efficient synthesis of hexahydroquinoline derivatives (5a–o) was reported via a four-component condensation reaction of aldehydes, dimedone, methyl aceto acetate and ammonium acetate in the presence of Triton X-100 in water at room temperature. The use of just 20 mol % of Triton X-100 in water solvent is sufficient. The FT-IR, ¹⁹F NMR, ¹H NMR, ¹³C NMR spectra and elemental analysis confirm the structure of the compounds.     

Role of aerosil surface in reaction of exciplex formation in the presence of the nonionic surfactant triton X-100

In the formation of a pyrene/N,N-dimethylaninline exciplex solubilized in micelles of the nonionic surfactant Triton X-100, under conditions of adsorption on the surface of Aerosil (pyrogenic silica), the features of the reaction are determined by the restructuring of the Aerosil surface in the aqueous micellar medium and by encapsulation of the fluorophore molecules.Institute of Surface Chemistry, National Academy of Sciences of the Ukraine, 31 Nauka Prospect, Kiev 252039, Ukraine. Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 32, No. 5, pp. 320–323, September–October, 1996. Original article submitted June 16, 1995.     

Spectrophotometric determination of mercury(II) and silver(I) with copper(II) and diethyldithiocarbamate in the presence of triton X-100

Procedures for the determination of mercury and silver by displacement of diethyldithiocarbamate (DDTC) from its copper complex in the presence of 1% Triton X-100, and measurement of the decrease in the Cu(DDTC)(2) absorbance, are described. The use of the surfactant avoids the need for an extraction step. Reproducibility within 1% and detection limits of 0.25 ppm Hg(II) and 0.45 ppm Ag(I) have been obtained, and linear calibration ranges up to 13 ppm Hg(II) and 15 ppm Ag(I). In the presence of 0.1M EDTA very good selectivity is achieved.     

Spectrophotometric determination of trace amounts of cadmium using Cd(II)-KI-Crystal violet system in the presence of triton X-100 and PVA

A new highly sensitive spectrophotometric method for determination traces of cadmium using Cd-(II)-KI-Crystal Violet system in the presence of Triton X-100-poly(vinyl) alcohol (PVA) mixture has been developed. The apparent molar absorptivity of the system is 1.77 × 10⁵ 1-mol^–1 cm^–1 and its Sandell's sensitivity is 6.35 × 10^–4 g·Cd·cm^2–. Beer's law is obeyed up to 0.32 g·Cd(II)·ml^–1. The method has been applied to determine Cd(II) in waste water, rice and pork meat samples with satisfactory results.     

Spectral and photophysical studies of thiazine dyes in triton X-100

The absorption spectra of several thiazine dyes such as thionine, azure A, azure B, azure C and methylene blue in aqueous solution of Triton X-100 show that dyes as electron acceptors form 11 charge-transfer (CT) or electron-donor-acceptor (EDA) complexes with Triton X-100, which acts as an electron donor. From the thermodynamic and spectrophotometric properties of these complexes, the abilities of dyes to accept an electron are in the order: azure C > thionine > azure A > azure B > methylene blue. The photogalvanic effect in the aqueous solution dye-surfactant has been studied. Generation of photovoltage supports a CT or EDA interaction between thiazine dyes and Triton X-100. There is a good correlation among the photophysical (photovoltage), spectral and thermodynamic properties of these complexes.     

Nephelometric determination of germanium(IV) witho-phenanthroline and bromopyrogallol red in the presence of triton X-100

The light scattering of germanium(IV) witho-phenanthroline [phen] and bromopyrogallol red [BPR] in the presence of Triton X-100 has been studied. The ternary complex shows a constant light scattering intensity in an acidic medium (0.02 mol/l HCl+0.02 mol/l H₃PO₄). The maximum wavelength was 332 nm. The calibration graph is linear in the range 0.03–10 g/25 ml for Ge(IV). The detection limit is 0.03 g/25 ml. The composition of the ternary complex is GephenBPR = 122. The effects of diverse ions on the determination of Ge(IV) were examined. This simple method with high sensitivity can be successfully applied to the determination of Ge(IV) in coal fly ash, with a relative standard deviation of 2%.     

Triton X-100存在下钴与α-(α-噻唑偶氮)-5-二甲氨基苯甲酸的胶束显色反应

本文简化并改进了2-(2-噻唑偶氮)-5-二甲氨基苯甲酸(TAMB)的合成方法. 详细研究了在非离子表面活性剂Triton X-100存在下TAMB与钴的胶束增敏显色反应.     

Dynamic surface tensions of micellar Triton X-100 solutions

Considering surfactant solutions at concentrations exceeding the CMC, another relaxation process besides diffusion occurs, also affecting the dynamic surface tension. The latter equilibration process concerns a micellisation/demicellisation process, representing the disintegration of micelles into monomers. The micellisation kinetics are accounted for by adding a single source term to the diffusion equation of the free monomers.

In the present paper the integration of the diffusion equation is avoided by using the concept of the diffusion penetration depth. Nevertheless, when this approximation is made, good agreement is achieved between experiment and theory for micellar Triton X-100 solutions. Moreover, it follows that diffusion of micelles may not be neglected.     

An FT-IR study of sarcoplasmic reticulum solubilization by triton X-100

Low concentrations of the non-ionic detergent Triton X-100 increase the activity of sarcoplasmic reticulum Ca⁺⁺-ATPase without major changes in protein conformation, according to FT-IR spectroscopy in H₂O and D₂O. At higher surfactant concentrations the enzyme activity is inhibited, while changes in protein conformation are seen: The proportion of unordered structure increases at the expenses of-turns and parallel-sheet.     

Protein separation with surfactant-coated polystyrene involving Cibacron Blue 3GA-conjugated triton X-100

Through mixing of porous polystyrene particles (Amberlite XAD-4), non-ionic surfactants, and surfactant-conjugated substrates (affinity ligand) in an aqueous solution led to the formation of a novel medium (affinity admicelle) for protein separation. The ligand (CB-Triton) was synthesized by mixing a triazine dye (Cibacron Blue 3GA (CB)) and a polyoxyethylene-type non-ionic surfactant (Triton X-100) in weakly alkaline solutions. Triton X-100 and CB-Triton were competitively sorbed onto XAD-4. Albumin (bovine serum), alcohol dehydrogenase (yeast), and lysozyme (chicken egg) having specific interaction to CB were collected onto the affinity admicelle. On the other hand, the collection of ovalubmin (chicken egg white), having no binding ability to CB, was negligibly small. Lysozyme in 100 microl of chicken egg white, diluted with 900 microl of 10 mM Tris-HCl (pH 7.4), was successfully collected on 18 mg of CB-Triton admicelles and, then, it was eluted with 1 ml of aqueous solution of 100 mM phosphate (pH 7.4). The recovery based on the activity for the lysis of micrococcus and the concentration factor were 60% and 40 (n = 3), respectively.