Aminopropyl-functionalized ethane-bridged periodic mesoporous organosilica spheres: preparation and application in liquid chromatography

A synthetic approach for synthesizing spherical aminopropyl-functionalized ethane-bridged periodic mesoporous organosilicas (APEPMOs) is reported. The mesoporous material was prepared by a one-step co-condensation of 1,2-bis(triethoxysilyl)ethane (BTSE) and 3-aminopropyltriethoxysilane (APTES) using cetyltrimethylammonium chlorine (C(18)TACl) as a template with the aid of a co-solvent (methanol) in basic medium. The APEPMOs were characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), powder X-ray diffraction (XRD), nitrogen sorption measurement, Fourier transform infrared spectroscopy (FT-IR) and elemental analysis. It was shown that this material exhibited spherical morphology, ordered cubic mesostructure and good mechanical strength. The APEPMOs were tested as a potential stationary phase for liquid chromatography (LC) because the column exhibited reduced back pressure. Moreover, they exhibited good chemical stability in basic mobile phase, which can be ascribed to the ethane groups in the mesoporous framework.     

Synthesis of bifunctionalized mesoporous organosilica spheres for high-performance liquid chromatography

Phenyl-functionalized mesoporous ethane-silicas with spherical morphology were synthesized by one-step co-condensation of phenyltrimethoxysilane (PTMS) and 1,2-bis(trimethoxysily)ethane (BTME) using a triblock copolymer EO(20)PO(70)EO(20) (P123) as template with the aid of a co-surfactant (cetyltrimethylammonium bromide, CTAB) and a co-solvent (ethanol) in acidic medium. Powder X-ray diffraction (XRD), nitrogen sorption measurement and scanning electron microscopy (SEM) show that phenyl-functionalized ethane-silica has wormhole-like mesostructure and perfect spherical morphology. The chemical stability of phenyl-functionalized mesoporous ethane-silica in basic medium is greatly improved owing to the ethane groups bridged in the mesoporous framework. This work also demonstrates that the phenyl-functionalized mesoporous ethane-silica spheres are excellent packing materials for potential application in the reversed-phase high-performance liquid chromatography (HPLC).     

乙烷桥键介孔材料的制备及其在反相液相色谱中的应用

以1,2-二(三甲氧基硅基)-乙烷为硅源、聚氧乙烯-聚氧丙烯-聚氧乙烯三嵌段共聚物(EO20PO70EO20,P123)为模板剂、十六烷基三甲基溴化铵(CTAB)为共模板剂、乙醇为共溶剂,在酸性条件下合成了一种乙烷桥键有序介孔材料(PME)。研究表明,该PME具有高的比表面积(1152 m2/g)、高度有序的孔结构(二维六方相)、窄的孔径分布及表面光滑的球形形貌。将该PME不经化学改性直接用作反相高效液相色谱固定相,能够有效分离5种多环芳香族化合物(苯、萘、联苯、菲和芘)。     

固相合成法制备纳米碳酸锶微球

以六水合氯化锶(SrCl2·6H2 O)和碳酸氢铵(NH4 HCO3)为原料,十二烷基苯磺酸钠(SDBS)为表面活性剂,采用阴离子表面活性剂辅助固相球磨法制备纳米碳酸锶微球.样品采用扫描电镜(SEM)、透射电镜(TEM)、能谱仪(EDX)、X-射线衍射仪、红外光谱FTIR、热重仪和差示扫描仪联用(TG—DSC)等手段表...     

Uniform and size-tunable mesoporous silica with fibrous morphology for drug delivery

A family of mesoporous silica microspheres with fibrous morphology and different particle sizes ranging from about 400 to 900 nm has been successfully synthesized through a facile self-assembly process. The structural, morphological, and textural properties of the samples were well characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), nuclear magnetic resonance (NMR), Fourier transform infrared spectroscopy (FT-IR), N(2) adsorption/desorption, and thermal gravimetry (TG). The results reveal that this silica-based mesoporous material exhibits excellent physical properties, including a fibrous spherical morphology, good thermal stability, large pore volume, high specific surface area and narrow size distribution. Additionally, the size and textural properties can be tuned by altering the silica precursor/template molar ratio. The formation and the self-assembly evolution process have also been proposed. The obtained materials were further used as a drug delivery carrier to investigate the in vitro drug release properties using doxorubicin (DOX) as a representative model drug. It was found that this kind of silica exhibits good biocompatibility and obvious sustained drug release properties, suggesting its potential application in biological fields.     

Quinine Derivative Bonded the Hybrid Mesoporous Silicas Chiral Stationary Phase: Preparation and Application in Liquid Chromatography

A novel chiral stationary phase (QN‐APEPMOs) was synthesized by immobilizing quinine derivative (QN) onto spherical ammoniapropyl‐functionalized ethane‐bridged periodic mesoporous organosilicas (APEPMOs). The mesoporous material was prepared by a one‐step co‐condensation of 1,2‐bis (triethoxysilyl) ethane (BTSE) and 3‐ammoniapropyl triethoxysilane (KH‐550) using cetyltrimethyl‐ammoniumchlorine (C₁₈TACl) as a template with the aid of ethanol (co‐solvent) in basic medium. And O‐9‐(tert‐butyl carbamoyl) quinine derivative was immobilized on APEPMOs particles through the vinylic double bond. All of the products were characterized. The results showed that APEPMOs were perfect substrates for chiral stationary phase (CSP) and quinine moieties have been successfully immobilized onto the silica gel. To evaluate the chiral discrimination ability of the synthesized CSP, some analytes have been investigated on QN‐APEPMOs in high performance liquid chromatography (RP‐HPLC) in reversed phase. Three acidic compounds were baseline separated. The results demonstrated that QN‐APEPMOs had high selectivity for acidic compounds such as: carboxylic and sulfonic acids. And the reproducibility of the chiral column was good, while the stability was not very good.     

Self-assembled mesoporous Co and Ni-ferrite spherical clusters consisting of spinel nanocrystals prepared using a template-free approach

Based on a self-assembly strategy, spherical mesoporous cobalt and nickel ferrite nanocrystal clusters with a large surface area and narrow size distribution were successfully synthesized for the first time via a template-free solvothermal process in ethylene glycol and subsequent heat treatment. In this work, the mesopores in the ferrite clusters were derived mainly from interior voids between aggregated primary nanoparticles (with crystallite size of less than 7 nm) and disordered particle packing domains. The concentration of sodium acetate is shown herein to play a crucial role in the formation of mesoporous ferrite spherical clusters. These ferrite clusters were characterized in detail using wide-angle X-ray diffraction, thermogravimetric-differential thermal analysis, (57)Fe M?ssbauer spectroscopy, X-ray photoelectron spectroscopy, field-emission scanning electron microscopy, standard and high-resolution transmission electron microscopy, and other techniques. The results confirmed the formation of both pure-phase ferrite clusters with highly crystalline spinel structure, uniform size (about 160 nm) and spherical morphology, and worm-like mesopore structures. The BET specific surface areas and mean pore sizes of the mesoporous Co and Ni-ferrite clusters were as high as 160 m(2) g(-1) and 182 m(2) g(-1), and 7.91 nm and 6.87 nm, respectively. A model for the formation of the spherical clusters in our system is proposed on the basis of the results. The magnetic properties of both samples were investigated at 300 K, and it was found that these materials are superparamagnetic.     

基于L-谷氨酸的手性硅胶球的制备及其应用

无机介孔硅球因其具有足够的机械强度、热稳定性,以及适应多种流动相的优点,成为高效液相色谱(HPLC)柱填料中使用最广泛和最重要的材料.但在此研究领域中,并未见球形的全无机手性硅胶用作HPLC手性固定相.该文以无机球形介孔硅胶作为研究对象,通过堆砌硅珠法,以硅溶胶为原料,L-谷氨酸(L-Glu)为手性源,在手性环境中制造...     

Structure and surface chemistry in crystalline mesoporous (CeO(2-δ))-YSZ

Mesoporous metal oxides (CeO(2-δ))-YSZ have been synthesized by a versatile direct synthesis method using ionic cetyltrimethylammonium bromide (CTAB) and different nonionic (block copolymers) as surfactants and urea as hydrolyzing agent. The synthesis was realized at pH=9 using tetraethylammonium hydroxide (TEAOH) as pH mediator. Calcination at 550 °C led to the formation of crystalline metal oxides with uniform mesoporosity. The obtained materials have been characterized by thermogravimetric analysis (TG-DTG), wide and small-angle X-ray diffraction (XRD), Raman spectroscopy, Brunauer, Emmett and Teller (BET) surface area analysis, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). All the obtained materials exhibits mesoporous structure, crystalline structure indexed in a cubic symmetry, showing a high surface area, a uniform and narrow pore size distribution, spherical morphology typical for the mesoporous materials. The crystalline and mesoporous structures, surface chemistry and stoichiometry for the samples synthesized using ionic and nonionic surfactants have been discussed.     

Hierarchical Mesoporous SnO Microspheres as High Capacity Anode Materials for Sodium‐Ion Batteries

Mesoporous SnO microspheres were synthesised by a hydrothermal method using NaSO₄ as the morphology directing agent. Field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM) and high‐resolution transmission electron microscopy (HRTEM) analyses showed that SnO microspheres consist of nanosheets with a thickness of about 20 nm. Each nanosheet contains a mesoporous structure with a pore size of approximately 5 nm. When applied as anode materials in Na‐ion batteries, SnO microspheres exhibited high reversible sodium storage capacity, good cyclability and a satisfactory high rate performance. Through ex situ XRD analysis, it was found that Na⁺ ions first insert themselves into SnO crystals, and then react with SnO to generate crystalline Sn, followed by Na–Sn alloying with the formation of crystalline NaSn₂ phase. During the charge process, there are two slopes corresponding to the de‐alloying of Na–Sn compounds and oxidisation of Sn, respectively. The high sodium storage capacity and good electrochemical performance could be ascribed to the unique hierarchical mesoporous architecture of SnO microspheres.     

温度对介孔二氧化硅形貌和介相结构有序性的影响

1992年Kresge等科学工作者首次报道了一种新颖的介孔二氧化硅材料,介孔二氧化硅的合成及其性能表征引起了广泛的研究兴趣[1,2]。这种材料由于具有高比表面积(1000~1400m2·g-1)、孔道排列有序、孔径分布窄并可以在2~10nm范围内可调等优点,所以有望用于催化与吸附、化学传感、纳     

镁热还原法制备有序介孔Si/C锂离子电池负极材料及其电化学性能

以SBA-15为前驱体,在660 ℃下通过镁热还原反应得到介孔硅材料,并对其进行碳包覆处理,成功地制备了有序介孔Si/C（OMP-Si/C）复合材料。该OMP-Si/C材料保留了SBA-15模板的有序蜂窝孔道,并且形成具有高堆积密度的莲藕链束结构。文中还提出了一个SBA-15镁热还原液态环境反应模型,探讨了660 ℃下硅的高度有序介孔与莲藕链束结构的形成机理。利用X射线衍射（XRD）仪、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、氮气吸脱附法及拉曼光谱对样品物相和微观形貌进行了表征。这种高度有序介孔Si/C复合材料具有优异的电化学性能,展现出其在第二代锂电池负极材料领域中的潜在应用价值。     

Synthesis of hollow spherical silica with MCM-41 mesoporous structure

Hollow spherical mesoporous silica was synthesized by using sodium silicate as a precursor and a low concentration of cetyltrimethylammonium bromide (CTAB) (0.154 mol dm^–3). The resulting hollow spherical particles were characterized with scanning electron microcopy (SEM), small-angle X-ray diffraction (SXRD), transmission electron microscopy (TEM), and N₂ gas adsorption and desorption techniques. The results showed that regular spherical mesoporous silica could be obtained only if the molar ratio of propanol to CTAB was in the range of approximately 8:1–9:1. The spherical particles were hollow (inside), and the shell consisted of smaller particles with a pore structure of hexagonal symmetry. With an increase of the molar ratio of propanol to CTAB, the distance (a value) between centers of two adjacent pores increased, and the pore structure of mesoporous silica became less ordered. N₂ adsorption–desorption curves revealed type IV isotherms and H1 hysteresis loops; with an increase of the molar ratio of propanol to CTAB, the pore size with Barrett–Joyner–Halenda (BJH) diameter of the most probable distribution decreased, but the half peak width of the pore size distribution peak increased     

Spherical Periodic Mesoporous Organosilicas Bearing Camphorsulfonamide Substructures for HPLC

New mesoporous organic?Cinorganic spheres were prepared by one step co-condensation of trialkoxysilylated camphorsulfonamide (CSA) and 1,2-bis(triethoxysilyl)ethane (BTSE) using octadecyltrimethylammonium chloride (C₁₈TMACl) as template and ethanol as co-solvent in basic medium. The materials have been characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), nitrogen sorption measurement, diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and elemental analysis (EA). Then the mesoporous organic?Cinorganic spheres were demonstrated to be novel packing materials for potential application in the normal-phase high performance liquid chromatography (HPLC).     

Structure and microstructure of nanoscale mesoporous silica spheres

The addition of alcohol to the synthesis of a mesoporous silica material will induce a transition from hexagonal (MCM-41) to cubic (MCM-48) to a lamellar phase and finally to silica spherical particles (SSP), as the alcohol adopts the role of cosurfactant. This will evolve to a cosolvent function as the alcohol concentration is further increased. X-ray diffraction suggests that a phase regression phenomenon occurs, in contradiction with the g-value. Transmission electron microscopy reveals the structure and the microstructure of the mesoporous silica spherical particles. It is shown that the SSP consists of a core of a truncated octahedron with the MCM-48 cubic structure and radial cylindrical pores grown on the surface of the truncated octahedron. This structure model and a possible formation mechanism are discussed.     

Solid‐phase purification and extraction for the determination of trace neonicotinoid pesticides in tea infusion

An analytical protocol that includes solid‐phase purification and extraction is successfully developed for the determination of trace neonicotinoid pesticides in tea infusion. The method consists of a purification on amino‐functionalized mesoporous silica SBA‐15 followed by a solid‐phase extraction based on graphene oxide before ultra high performance liquid chromatography with tandem mass spectrometry analysis. Parameters that significantly affected the extraction of the neonicotinoids onto graphene oxide, such as the amount of adsorbent, extraction time, pH, elution solvent, etc. were optimized. The amino‐functionalized mesoporous silica SBA‐15 has been proved to be an efficient adsorbent for removal of polyphenols especially catechins from tea infusion. Graphene oxide exhibits a very rapid adsorption rate (within 10 min) and high adsorption capacities for neonicotinoids at low initial concentration (0.01–0.5 mg/L). The analysis method gave a good determination coefficient (r² > 0.99) for each pesticide and high recoveries in the range of 72.2–95.0%. Powder X‐ray diffraction, Raman spectroscopy, transmission electron microscopy, and UV‐vis spectroscopy were utilized to identify the structure and morphology of graphene oxide. The adsorption driving force of neonicotinoids on graphene oxide mainly depends on π–π electron donor–acceptor interaction and electrostatic interaction.     

氮掺杂介孔碳的制备及其电化学超电容性能

Nitrogen-doped mesoporous carbons (NMCs) were synthesized by direct carbonization of zeolitic imidazolate framework-8 (ZIF-8) nanopolyhedrons. The surface morphology and structure were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and surface area and pore size analyzer. The electrochemical supercapacitive properties of the NMCs were also investigated. The results showed that the NMCs had a uniformmorphology, mesoporous nanostructure, and high surface area (2737m²·g^-1). On the other hand, based on the excellent surface wettability, pseudocapacitive behavior and electrolyte accessibility resulted fromN-doping and the mesoporous structure, the NMCs exhibited excellent electrochemical supercapacitive properties: a high specific capacitance (307 F·g^-1 in 1.0 mol·L^-1 H₂SO₄ solution, at 1 A·g^-1), good power characteristics, and satisfactory stability (the capacitance retained ratio was 96.9%after 5000 cycles even at a high current density of 10A·g^-1).     

具有结晶孔壁介孔镁锌氧复合物(英文)

以介孔碳为硬模板经过二次填充制备了介孔镁锌氧复合物.采用X射线衍射(XRD),透射电镜(TEM),扫描电镜(SEM),N2吸附脱附等手段对材料的结构及形貌进行了表征.结果表明,所制备的材料在具有高有序介孔结构的同时还具有结晶的孔壁.孔径尺寸均为4.0nm,比表面积均为114.5m2.g-1.广角XRD结果初步表明,材料中氧化镁和氧化锌复合形成了固溶体.该材料作为一种半导体材料有望在光学器件领域获得新的应用价值.     

MCM-48介孔材料相转化合成的形成机制

利用水热合成的方法,使用新型的表面活性剂十六烷基三甲基对苯磺酸盐作为模板剂合成了高质量的MCM-48介孔分子筛,并用X-射线衍射(XRD)、扫描电镜(SEM)、高分辨透射电镜(HRTEM)以及N₂吸附-脱附进行了表征。合成过程的研究表明该合成体系经历了三相,起始相为具有六方对称性的MCM-41,随着加热时间的延长,生成了具有立方对称性的MCM-48,进一步延长加热时间则生成了层状相MCM-50。三相转变发生的核心驱动力来自于表面活性剂有效堆积参数g因子的改变。另外,XRD、傅立叶变换的红外光谱(FT-IR)以及固体魔角自旋核磁共振(²⁹Si MAS NMR)的表征结果证明：随着晶化时间的延长,相转变的同时伴随着介孔材料的孔壁逐渐由原子无序的非晶态向原子有序的晶态结构转变。最终形成的原子有序层状介孔分子筛可以作为扩孔型微孔分子筛合成的有效前驱体。     

Preparation of mesostructured barium sulfate with high surface area by dispersion method and its characterization

The spherical and cubic mesoporous BaSO(4) particles with high surface area were successfully produced via one-step process through precipitation reaction in aqueous solution of Ba(OH)(2) and H(2)SO(4) with ethylene glycol (n-HOCH(2)CH(2)OH) as a modifying agent. The BaSO(4) nanomaterial revealed that the high surface area and the mesoporous was stable up to 400 degrees C. Agglomerate mesoporous barium sulfate nanomaterials were obtained by the reaction of Ba(2+) and SO(2-)(4) with ethylene glycol aqueous solution. The ethylene glycol was used to control the BaSO(4) particle size and to modify the surface property of the particles produced from the precipitation. The dried and calcined mesoporous BaSO(4) nanomaterials were characterized by X-ray diffraction (XRD), BET surface area and N(2) adsorption-desorption isotherm, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared resonance (FTIR) and thermogravimetric analysis (TGA). The as-prepared mesoporous dried BaSO(4) possesses a high BET surface area of 91.56 m(2) g(-1), pore volume of 0.188 cm(3) g(-1) (P/P(0)=0.9849) and pore size of 8.22 nm. The SEM indicates that the morphology of BaSO(4) nanomaterial shows shell like particles up to 400 degrees C, after that there is drastically change in the material due to agglomeration. Synthesis of mesoporous BaSO(4) nanomaterial is of significant importance for both sulphuric acid decomposition and oxidation of methane to methanol.